標準號 |
中文名稱 |
英文名稱 |
| ISO 182-1-1990 |
塑料.基于氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其它酸性物的趨勢測定.第1部分:剛果紅法 |
Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 1: Congo red method |
| ISO 182-2-1990 |
塑料.基于氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其它酸性物的趨勢測定.第2部分:pH值法 |
Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 2: pH method |
| ISO 182-3-1993 |
塑料.基于氯乙烯均聚物和共聚物的化合物及產物在高溫下析出氯化氫和其它酸性產物的趨勢測定.第3部分:電導測量法 |
Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 3: conductometric method |
| ISO 182-4-1993 |
塑料.基于氯乙烯均聚物和共聚物的化合物及產物在高溫下析出氯化氫和其它酸性產物的趨勢測定.第4部分:電位測量法 |
Plastics; determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures; part 4: potentiometric method |
| ISO 1823-1-1997 |
橡膠軟管和軟管組件.第1部分:海上石油的抽取和輸送.規格 |
Rubber hoses and hose assemblies - Part 1: On-shore oil suction and discharge - Specification |
| ISO 1823-2-1997 |
橡膠軟管和軟管組件.第2部分:船舶/碼頭(石油的)排輸.規格 |
Rubber hoses and hose assemblies - Part 2: Ship/dockside discharge - Specification |
| ISO 18245-2003 |
零售金融業務.商業分類代碼 |
(Retail financial services - Merchant category codes) |
| ISO 18245-2003 |
零售金融業務.商業分類代碼 |
|
| ISO 1825-1996 |
飛機地面加油和放油用橡膠軟管及軟管配件規范 |
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification |
| ISO 18265-2003 |
金屬材料.硬度值的換算 |
(Metallic materials - Conversion of hardness values) |
| ISO 18265-2003 |
金屬材料.硬度值的換算 |
|
| ISO 1827-1991 |
硫化橡膠或熱塑橡膠.抗剪模量或與剛性板膠粘性的測定.四倍剪切法 |
Rubber, vulcanized or thermoplastic; determination of moduls in shear or adhesion to rigid plates; quadruple shear method |
| ISO 18273-2004 |
焊接消耗品.鋁和鋁合金焊接用焊絲電極、金屬絲和棒材.分類 |
|
| ISO 18274-2004 |
焊接消耗品.鎳和鎳合金電弧焊用焊絲和條式電極、金屬線和棒材.分類 |
|
| ISO 18278-1-2004 |
阻焊.可焊性.第1部分:金屬材料的電阻點焊、縫焊和凸焊的可焊性評定 |
|
| ISO 18278-2-2004 |
阻焊.可焊性.第2部分:點焊用薄鋼板評定用備用規程 |
|
| ISO 18279-2003 |
釬焊.釬焊接頭的缺陷 |
|
| ISO 18286-2004 |
熱軋不銹鋼板.尺寸和形狀公差 |
|
| ISO 1829-1975 |
一般用途公差帶的選擇 |
Selection of tolerance zones for general purposes |
| ISO 183-1976 |
塑料.著色劑滲色的定性評估 |
Plastics; Qualitative evaluation of the bleeding of colorants |
| ISO 1830-1982 |
紙漿.錳含量的測定.高碘酸鈉光度法和火焰原子吸收光譜測定法 |
Pulps; Determination of manganese content; Sodium periodate photometric and flame atomic absorption spectrometric methods |
| ISO 1831-1980 |
光字符識別用的打印規范 |
Printing specifications for optical character recognition |
| ISO 1832 AMD 1-1999 |
可轉位鑲齒切削刀具.名稱與符號.修改件1.V型鑲齒d和m的公差 |
Indexable inserts for cutting tools - Designation; Amendment 1: Tolerances of d and m of V-shape inserts |
| ISO 1832-1991 |
可轉位鑲齒切削刀具.名稱 |
Indexable inserts for cutting tools; designation |
| ISO 1832-2004 |
切削刀具用可轉位刀片.名稱與符號 |
|
| ISO 18329-2004 |
乳和乳制品.furosine含量的測定.離子對反相高效液相色譜法 |
|
| ISO 1833 AMD 1-1980 |
第1次修改 |
Textiles; binary fibre mixtures; quantitative chemical analysis; amendment 1 |
| ISO 1833-1977 |
紡織品.雙組分纖維混紡.定量化學分析 |
Textiles; Binary fibre mixtures; Quantitative chemical analysis |
| ISO 18330-2003 |
乳和乳制品.抗菌劑殘留物探測用免疫分析或受體分析的標準化描述指南 |
(Milk and milk products - Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues) |
| ISO 18330-2003 |
乳和乳制品.抗菌劑殘留物探測用免疫分析或受體分析的標準化描述指南 |
|
| ISO 18333-2002 |
物料裝卸用托盤.平托盤用新木制件的質量 |
Pallets for materials handling - Quality of new wooden components for flat pallets |
| ISO 18334-2003 |
材料運輸用托盤.新的木制平托盤的組裝質量 |
Pallets for materials handling - Quality of assembly of new, wooden, flat pallets |
| ISO 18334-2003 |
材料運輸用托盤.新的木制平托盤的組裝質量 |
|
| ISO 18334-2003 |
材料運輸用托盤.新的木制平托盤的組裝質量 |
|
| ISO 18334-2003 |
材料運輸用托盤.新的木制平托盤的組裝質量 |
|
| ISO 1834-1999 |
提升用短鏈節鏈條.驗收的一般條件 |
Short link chain for lifting purposes - General conditions of acceptance |
| ISO 1835-1980 |
起重用短環鏈.吊鏈等用M(4)級非校準鏈條 |
Short link chain for lifting purposes; grade M (4), non-calibrated, for chain slings etc. |
| ISO 1837-2003 |
起重鉤.命名 |
Lifting hooks - Nomenclature |
| ISO 1837-2003 |
起重鉤.命名 |
|
| ISO 1838-1993 |
鮮菠蘿.貯存和運輸指南 |
Fresh pineapples; storage and transport |
| ISO 1839-1980 |
茶葉.取樣 |
Tea; Sampling |
| ISO 1840-1976 |
屠宰用活牲畜的定義.豬.三種語言版 |
Definitions of living animals for slaughter; Porcines Trilingual edition |
| ISO 1841-1-1996 |
肉和肉制品.氯化物含量的測定.第1部分:弗哈德法 |
Meat and meat products - Determination of chloride content - Part 1: Volhard method |
| ISO 1841-2-1996 |
肉和肉制品.氯化物含量的測定.第1部分:電位滴定法 |
Meat and meat products - Determination of chloride content - Part 2: Potentiometric method |
| ISO 18413-2002 |
液壓傳動.部件和件的清潔度.與污物收集、分析和數據報告相關的檢驗文件和原則 |
Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| ISO 1842-1991 |
水果和蔬菜制品.pH值測定 |
Fruit and vegetable products; determination of pH |
| ISO 1843-1-1977 |
工業用高級醇.試驗方法.第1部分:總則 |
(Higher alcohols for industrial use; Methods of test; Part I: General) |
| ISO 1843-2-1977 |
工業用高級醇.試驗方法.第2部分:用酚酞測定酸度.滴定法 |
(Higher alcohols for industrial use; Methods of test; Part II: Determination of acidity to phenolphthalein; Titrimetric method) |
| ISO 1843-3-1977 |
工業用高級醇.試驗方法.第3部分:羰基化合物含量的測定.電位滴定法 |
(Higher alcohols for industrial use; Methods of test; Part III : Determination of carbonyl compounds content; Potentiometric method) |
| ISO 1843-4-1977 |
工業用高級醇.試驗方法.第4部分:溴值的測定.含氯化汞時用滴定法測定 |
(Higher alcohols for industrial use; Methods of test; Part IV : Determination of bromine number; Titrimetric method in the presence of mercury(II) chloride) |
| ISO 1843-5-1977 |
工業用高級醇.試驗方法.第5部分:醇類總含量的測定.滴定法 |
Higher alcohols for industrial use; Methods of test; Part V : Determination of total alcohols content; Titrimetric method |
| ISO 1843-6-1977 |
工業用高級醇.試驗方法.第6部分:灰分的測定 |
Higher alcohols for industrial use; Methods of test; Part VI : Determination of ash |
| ISO 1843-7-1982 |
工業用高級醇.試驗方法.第7部分:蒸餾出體積收獲率的測定 |
Higher alcohols for industrial use; Methods of test; Part 7 : Determination of distillation yield |
| ISO 1843-8-1982 |
工業用高級醇.試驗方法.第8部分:硫酸顏色試驗 |
Higher alcohols for industrial use; Methods of test; Part 8 : Sulphuric acid colour test |
| ISO 18431-2-2004 |
機械振動和沖擊.信號處理.第2部分:傅里葉變換分析用時域窗 |
|
| ISO 18436-1-2004 |
機器的工況監測與診斷.人員的培訓與認證要求.第1部分:認證機構和認證過程的要求 |
|
| ISO 18436-2-2003 |
機器的情況監測與診斷.人員的培訓與確認要求.第2部分:振動情況的監測和診斷 |
(Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 2: Vibration condition monitoring and diagnostics) |
| ISO 18436-2-2003 |
機器的情況監測與診斷.人員的培訓與確認要求.第2部分:振動情況的監測和診斷 |
|
| ISO 18436-2-2003 |
機器的情況監測與診斷.人員的培訓與確認要求.第2部分:振動情況的監測和診斷 |
|
| ISO 18453-2004 |
天然氣.水含量和水露點的相關性 |
|
| ISO 18453-2004 |
天然氣.水含量和水露點的相關性 |
|
| ISO 18454-2001 |
鞋靴.鞋靴及鞋靴部件調節和試驗的標準環境 |
Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear |
| ISO 185-1988 |
灰口鑄鐵.分類 |
Grey cast iron; classification |
| ISO 18513-2003 |
旅游服務設施.賓館及其他類型旅游膳宿供應.術語 |
(Tourism services - Hotels and other types of tourism accommodation - Terminology) |
| ISO 18513-2003 |
旅游服務設施.賓館及其他類型旅游膳宿供應.術語 |
|
| ISO 1853-1998 |
硫化或熱塑性導電橡膠和耗能橡膠.電阻率的測量 |
Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity |
| ISO 1854-1999 |
乳清干酪.脂肪含量的測定.重量分析法(參照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) |
| ISO 18553-2002 |
在聚烯烴管、配件和化合物中色料或炭黑分散體的等級評定方法 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| ISO 1856-2000 |
柔性多孔聚合材料.壓縮永久變形的測定 |
Flexible cellular polymeric materials - Determination of compression set |
| ISO 18573-2003 |
輸送帶.試驗大氣和狀態調節期 |
(Conveyor belts - Test atmospheres and conditioning periods) |
| ISO 18573-2003 |
輸送帶.試驗大氣和狀態調節期 |
|
| ISO 1858-1977 |
信息處理.互換儀表用磁帶的帶有76mm(3in)中心孔的通用磁帶盤和卷軸 |
Information processing; General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications |
| ISO 1859-1973 |
信息處理.互換儀表用未錄磁帶的一般尺寸要求 |
Information processing; Unrecorded magnetic tapes for interchange instrumentation applications; General dimensional requirements |
| ISO 18593-2004 |
食品和動物飼料的微生物.使用接觸板和拭子的表面抽樣技術的水平方法 |
|
| ISO 186-2002 |
紙和紙板.測定平均質量取樣 |
Paper and board - Sampling to determine average quality |
| ISO 1860-1986 |
信息處理.互換儀表用磁帶的精密卷盤 |
Information processing; Precision reels for magnetic tape used in interchange instrumentation applications |
| ISO 18609-2000 |
動物和植物脂肪和油.不可皂化物質的測定.己烷萃取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction |
| ISO 1861-1975 |
信息處理.以8道劃印/mm(200道劃印/in)錄制的信息交換用7列磁道寬12.7mm(0.5in)的磁帶 |
Information processing; 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) |
| ISO 18613-2003 |
木制平托盤的修理 |
(Repair of flat wooden pallets) |
| ISO 18613-2003 |
木制平托盤的修理 |
|
| ISO 1862-1975 |
信息處理.以8道劃印/mm(200道劃印/in)錄制的信息交換用9列磁道寬12.7mm(0.5in)的磁帶 |
Information processing; 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) |
| ISO 18629-1-2004 |
工業自動化系統和集成.工藝規范語言.第1部分:總覽和基本原則 |
|
| ISO 18649-2004 |
機械振動.對于橋梁的動態試驗和研究的測量結果的評價 |
|
| ISO 1865-1977 |
紡織機械和附件.機械式經停裝置用齒形條.尺寸的規定和截面尺寸 |
Textile machinery and accessories; Serrated bars for mechanical warp stop motions; Designations of dimensions, and dimensions of cross-section Trilingual edition |
| ISO 18650-1-2004 |
建筑施工機械和設備.混凝土攪拌機.第1部分:詞匯和一般規范 |
|
| ISO 18653-2003 |
齒輪.單個齒輪測量用儀器的評價 |
(Gears - Evaluation of instruments for the measurement of individual gears) |
| ISO 18653-2003 |
齒輪.單個齒輪測量用儀器的評價 |
|
| ISO 18669-1-2004 |
內燃發動機.活塞銷.第1部分:一般規范 |
|
| ISO 18669-2-2004 |
內燃發動機.活塞銷.第2部分:檢驗測量原理 |
|
| ISO 1869-1977 |
工業用二氯甲烷.試驗方法一覽 |
Methylene chloride for industrial use; List of methods of test |
| ISO 187-1990 |
紙、紙板和紙漿.樣品調理 |
Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 1870-1977 |
工業用三氯甲烷.試驗方法一覽 |
Chloroform for industrial use; List of methods of test |
| ISO 1871-1975 |
農產食品.克耶達(Kieldahl)定氮法的一般說明 |
Agricultural food products; General directions for the determination of nitrogen by the Kjeldahl method |
| ISO 1872-1-1993 |
塑料.聚乙烯(PE)壓制件和擠材料.第1部分:命名體系和基本規范 |
Plastics; polyethylene (PE) moulding and extrusion materials; part 1: designation system and basis for specifications |
| ISO 1872-2 AMD 1-2000 |
塑料.聚乙烯(PE)模塑和擠制材料.第2部分:試樣制備和性能測定.修改件1 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1 |
| ISO 1873-1-1995 |
塑料.聚丙烯模塑和擠制塑料.第1部分:名稱與符號系統和基本規范 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 1873-2 AMD 1-2000 |
塑料.聚丙烯(PP)模塑和擠制材料.第2部分:試樣制備和性能測定.修改件1 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1 |
| ISO 18738-2003 |
提升機(電梯).提升機運行質量的測量 |
(Lifts (elevators) - Measurement of lift ride quality) |
| ISO 18738-2003 |
提升機(電梯).提升機運行質量的測量 |
|
| ISO 1874-1-1992 |
塑料.模壓和擠壓用聚酰胺共聚物和高聚物.第1部分:名稱與符號 |
Plastics - Polyamide (PA) homopolymers and copolymers for moulding and extrusion - Part 1: Designation |
| ISO 1874-2-1995 |
塑料.模塑和擠壓成型的聚酰胺(PA)材料.第2部分:試樣的制備和性能的測定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 18749-2004 |
水質.活性污泥上物質的吸收.使用特定分析方法的批量檢驗 |
|
| ISO 1875-1982 |
塑料.增塑的醋酸纖維素.用乙醚可萃取物質的測定 |
Plastics; Plasticized cellulose acetate; Determination of matter extractable by diethyl ether |
| ISO 18753-2004 |
精細陶瓷(高級陶瓷、高級工業陶瓷).用比重計測定陶瓷粉末的絕對密度 |
|
| ISO 18753-2004 |
精細陶瓷(高級陶瓷、高級工業陶瓷).用比重計測定陶瓷粉末的絕對密度 |
|
| ISO 18754-2003 |
精細陶瓷(高級陶瓷和高級工業陶瓷).密度和表觀孔隙率的測定 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity) |
| ISO 18754-2003 |
精細陶瓷(高級陶瓷和高級工業陶瓷).密度和表觀孔隙率的測定 |
|
| ISO 18756-2003 |
細陶瓷(高級陶瓷、高級工業陶瓷).用彎曲時的表面裂紋(SCF)法測定室溫下塊體陶瓷的斷裂韌性 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method ) |
| ISO 18756-2003 |
細陶瓷(高級陶瓷、高級工業陶瓷).用彎曲時的表面裂紋(SCF)法測定室溫下塊體陶瓷的斷裂韌性 |
|
| ISO 18756-2003 |
細陶瓷(高級陶瓷、高級工業陶瓷).用彎曲時的表面裂紋(SCF)法測定室溫下塊體陶瓷的斷裂韌性 |
|
| ISO 18757-2003 |
細陶瓷(高級陶瓷、高級工業陶瓷).利用BET法通過氣體吸收率測定陶瓷粉末的比表面積 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method) |
| ISO 18757-2003 |
細陶瓷(高級陶瓷、高級工業陶瓷).利用BET法通過氣體吸收率測定陶瓷粉末的比表面積 |
|
| ISO 18757-2003 |
細陶瓷(高級陶瓷、高級工業陶瓷).利用BET法通過氣體吸收率測定陶瓷粉末的比表面積 |
|
| ISO 188 Technical Corrigendum 1-2003 |
硫化或熱塑性橡膠.加速老化和耐熱性試驗.技術勘誤1 |
(Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests; Technical Corrigendum 1) |
| ISO 188 Technical Corrigendum 1-2003 |
硫化或熱塑性橡膠.加速老化和耐熱性試驗.技術勘誤1 |
|
| ISO 188-1998 |
硫化或熱塑橡膠.加速老化和耐熱性試驗 |
Rubber, vulcanized or thermoplastic - Accelerated ageing and heat-resistance tests |
| ISO 18812-2003 |
醫療信息學.醫用分析儀與實驗室信息系統的接口.使用說明文件 |
(Health informatics - Clinical analyser interfaces to laboratory information systems - Use profiles) |
| ISO 18812-2003 |
醫療信息學.醫用分析儀與實驗室信息系統的接口.使用說明文件 |
|
| ISO 18856-2004 |
水質.用氣相色譜法/質譜法測定被選鄰苯二甲酸酯 |
|
| ISO 18856-2004 |
水質.用氣相色譜法/質譜法測定被選鄰苯二甲酸酯 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com