標準號 |
中文名稱 |
英文名稱 |
| BS ISO 11807-1-2001 |
集成光學.詞匯.基本術語和符號 |
Integrated optics - Vocabulary - Basic terms and symbols |
| BS ISO 11807-2-2001 |
集成光學.分類術語 |
Integrated optics - Vocabulary - Terms used in classification |
| BS ISO 11813-1999 |
牛奶和牛奶制品.鋅含量的測定.火焰原子吸收光譜法 |
Milk and milk products - Determination of zinc content - Flame atomic absorption spectrometric method |
| BS ISO 11814-2002 |
奶粉.熱處理強度的評定.高效液相色譜法 |
Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography |
| BS ISO 11819-1-2000 |
聲學.路面對交通噪聲影響的測量.旁路統計法 |
Acoustics. Measurement of the influence of road surfaces on traffic noise. Statistical pass-by method |
| BS ISO 11822-1997 |
信息和文獻工作.目錄信息交換用阿拉伯字母代碼字符集的擴展 |
Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange |
| BS ISO 11833-1-1998 |
塑料.未增塑聚氯乙烯薄板.類型、尺寸和特征.厚度不低于1mm的薄板 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Tapes, dimensions and characteristics - Sheets of thickness not less than 1 mm |
| BS ISO 11833-2-1998 |
塑料.未增塑聚氯乙烯薄板.類型、尺寸和特征.厚度低于1mm的薄板 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Tapes, dimensions and characteristics - Sheets of thickness less than 1 mm |
| BS ISO 11841-1-2000 |
道路車輛和內燃發動機.過濾器詞匯.過濾器和過濾器件定義 |
Road vehicles and internal combustion engines - Filter vocabulary - Definitions of filters and filter components |
| BS ISO 11841-2-2000 |
道路車輛和內燃發動機.過濾器詞匯.過濾器和它們的件特性的定義 |
Road vehicles and internal combustion engines - Filter vocabulary - Definitions of characteristics of filters and their components |
| BS ISO 11843-1-2000 |
檢測能力.術語和條件 |
Capability of detection - Terms and conditions |
| BS ISO 11843-2-2000 |
檢測的能力.線性校準方法 |
Capability of detection - Methodology in the linear calibration case |
| BS ISO 11843-3-2003 |
檢測能力.在無校準數據可采用情況下測定反應變量關鍵值的方法 |
(Capability of detection - Methodology for determination of the critical value for the response variable when no calibration data are used) |
| BS ISO 11846-1996 |
金屬及其合金的腐蝕.經溶液熱處理的鋁合金的抗粒間腐蝕的測定 |
Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| BS ISO 11850-2003 |
林業機械.自行式機械的安全要求 |
(Machinery for forestry - Self-propelled machinery - Safety requirements) |
| BS ISO 11857-1999 |
紡織地板覆蓋物.剝離抗性的測定 |
Textile floor coverings - Determination of resistance to delamination |
| BS ISO 11858-1999 |
鋪地織物.接觸泡沫易碎性的測定 |
Textile floor coverings - Determination of friability of attached foams |
| BS ISO 11859-1999 |
紡織品地板覆蓋物.純毛手編地毯規范 |
Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification |
| BS ISO 11860-1999 |
鋪地織物.黃麻地毯背面纖維.規范 |
Textile floor coverings - Jute carpet backing fabric - Specification |
| BS ISO 11861-1999 |
紡織品地板覆蓋物.椰殼粗纖維墊.類型和規范 |
Textile floor coverings - Coir mats - Types and specification |
| BS ISO 11866-1-1997 |
牛奶和奶制品.推測大腸桿菌的計算.第1部分:概略數量技術 |
Milk and milk products - Enumeration of presumptive Escherichia coli - Most probable number technique |
| BS ISO 11866-2-1997 |
奶和奶制品.大腸埃希桿菌的估算.第2部分:利用4-甲基馓形科(β) D-葡糖苷酸反應法 |
Milk and milk products - Enumeration of presumptive Escherichia coli - Most probable number technique using 4-methylumbelliferyl--D-glucuronide (MUG) |
| BS ISO 11866-3-1997 |
奶和奶制品.大腸埃希桿菌的估算.44℃時利用膜狀物的菌落計數技術 |
Milk and milk products - Enumeration of presumptive Escherichia coli - Colony-count technique at 44 鳦 using membranes |
| BS ISO 11870-2000 |
牛奶和牛奶制品.脂肪含量的測定.油脂計法使用的一般指南 |
Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods |
| BS ISO 11873-2005 |
硬質合金.鈷金屬粉末中硫和碳含量的測定.紅外線探測法 |
|
| BS ISO 11886-2002 |
建筑機械和設備.打樁機和工業規范 |
Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specifications |
| BS ISO 1189-1996 |
電影技術.在35mm電影膠片上除成條發行拷貝外的磁性聲音記錄的錄音特性.規范 |
Cinematography - Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints - Specifications |
| BS ISO 11900-2-2001 |
壓制用工具.球形閘門凸模固定板.小功率用C和D型 |
Tools for pressing - Ball-lock punch retainers - Types C and D, reduced for light duty |
| BS ISO 11900-3-2004 |
沖壓工具.球鎖沖頭固定板.用于重負荷的E型固定板 |
|
| BS ISO 11901-2-2004 |
沖壓工具.氣壓彈簧.附件的規范 |
|
| BS ISO 11907-1-1998 |
塑料.煙霧產生.滅火廢液腐蝕性的測定.第1部分:導則 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Guidance |
| BS ISO 11907-2-1996 |
塑料制品.火焰沖擊波的測定.第2部分:靜態法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Static method |
| BS ISO 11907-3-1998 |
塑料.煙霧產生.滅火廢液腐蝕性的測定.第3部分:使用移動式熔爐的動態分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Dynamic decomposition method using a travelling furnace |
| BS ISO 11907-4-1998 |
塑料.煙霧產生.滅火廢液腐蝕性的測定.第4部分:使用熱輻射式加熱器的動態分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Dynamic decomposition method using a conical radiant heater |
| BS ISO 11922-1-1997 |
流體傳輸用熱塑管.尺寸和公差.米制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Metric series |
| BS ISO 11922-2-1997 |
流體傳輸用熱塑管.尺寸和公差.英制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Inch-based series |
| BS ISO 11925-3-1998 |
防火試驗的反作用.經受火焰直接碰撞的建筑產品的可燃性.多個火焰源試驗 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Multi-source test |
| BS ISO 11928-1-2000 |
縮微照相.圖像COM記錄器的質量控制.試驗框架的特征 |
Micrographics - Quality control of graphic COM recorders - Characteristics of the test frames |
| BS ISO 11928-2-2000 |
顯微制圖學.圖解的COM記錄器的質量控制.質量標準和控制 |
Micrographics - Quality control of graphic COM recorders - Quality criteria and control |
| BS ISO 11929-1-2004 |
電離輻射測量用探測限值和判斷閾的確定.基本原則和對不經過樣品處理的計數測量的應用 |
|
| BS ISO 11929-2-2004 |
電離輻射測量用探測限值和判斷閾的確定.基本原則和對經過樣品處理的計數測量的應用 |
|
| BS ISO 11929-3-2004 |
電離輻射測量用探測限值和判斷閾的確定.基本原則和對不經過樣品處理的高分辨率γ能譜法計數測量的應用 |
|
| BS ISO 11929-4-2001 |
電離輻射測量的檢測限值和決定范圍的測定.在沒有樣品處理的影響時用模擬速率計的通過線性刻度測量的基本原理和應用 |
Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment |
| BS ISO 11929-5-2005 |
電離輻射測量探測限和判斷閾的確定.基本原則及對放射材料累積過程中過濾器計數測量的應用 |
|
| BS ISO 11929-6-2005 |
電離輻射測量探測限和判斷閾的確定.基本原則和對瞬態測量方法的應用 |
|
| BS ISO 11929-7-2005 |
電離輻射測量探測限和判斷閾的確定.基本原則和一般應用 |
|
| BS ISO 11929-8-2004 |
電離輻射測量探測限和判斷閾的確定.基本原則及對不受樣品處理影響的光譜測量法演變的應用 |
|
| BS ISO 11933-3-1999 |
反應堆防護殼用組件.第3部分:光面門用傳送系統、氣閘室、雙開門用傳送系統和廢物鼓的密封連接 |
Components for containment enclosures - Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums |
| BS ISO 11943-1999 |
液壓流體力學.液體在自動流水線上顆粒計數系統.校驗和批準方法 |
Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation |
| BS ISO 11944-1995 |
薄壁金屬容器用圓體模. 最大容量為10 000 ml 的圓柱形罐和圓錐形罐的普通直徑 |
Round general use light gauge metal containers - Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity |
| BS ISO 11948-1-1997 |
排尿裝置.第1部分:整品檢驗 |
Urine-absorbing aids - Whole-product testing |
| BS ISO 11948-2-1998 |
小便吸收裝置.第2部分:輕度不能自制與低壓條件下短時間液體釋放(泄漏)的測定 |
Urine-absorbing aids - Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure |
| BS ISO 11962-2002 |
縮微照相.帶16 mm 和35 mm 成卷形式使用的沖擊標記 |
Micrographics - Image mark (blip) used with 16 mm and 35 mm roll microfilm |
| BS ISO 11994-1998 |
起重機.有效性.詞匯 |
Cranes - Availability - Vocabulary |
| BS ISO 11997-1-2005 |
色漆和清漆.耐周期性腐蝕的測定.濕(鹽霧)/干燥/濕度影響試驗 |
|
| BS ISO 12000-2000 |
塑料/橡膠.聚合物的分散及橡膠乳(天然的和合成的)的清析度.試驗方法的定義和復審 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods |
| BS ISO 12003-1-2002 |
農林用拖拉機.窄輪距輪式拖拉機.前置傾翻保護裝置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Front-mounted roll-over protective structures |
| BS ISO 12003-2-2002 |
農林用拖拉機.窄輪距輪式拖拉機.后置傾翻保護裝置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Rear-mounted roll-over protective structures |
| BS ISO 12006-2-2001 |
建筑施工.施工作業的信息組織.信息分類的框架 |
|
| BS ISO 12006-2-2001 |
建筑施工.施工作業的信息組織.信息分類的框架 |
Building construction - Organization of information about construction works - Framework for classification of information |
| BS ISO 1202-2001 |
香精油.1,8桉樹腦含量的測定 |
Essential oils - Determination of 1,8-cineole content |
| BS ISO 1203-1998 |
攝影技術.卷筒軟片制版照相機.后窗位置 |
Photography - Roll film cameras - Back window location |
| BS ISO 12040-1997 |
印刷技術.印刷和印刷油墨.使用過濾氙弧燈評價色牢度 |
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light |
| BS ISO 12043-1995 |
滾動軸承.單列角面接觸的滾子軸承.平擋圈和無活塞脹圈槽之間的突緣的倒棱尺寸 |
Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
| BS ISO 12044-1995 |
滾動軸承.單列角面接觸的球軸承.外圈無測推力邊的倒棱尺寸 |
Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
| BS ISO 12058-1-1997 |
塑料.使用落球粘度計測定粘度.斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Inclined-tube method |
| BS ISO 1206-2002 |
滾動軸承.尺寸系列為48,49和69的滾針軸承.邊界尺寸和公差 |
Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances |
| BS ISO 12080-1-2000 |
干脫脂奶.維生素A含量的測定.比色法 |
Dried skimmed milk - Determination of vitamin A content - Colorimetric method |
| BS ISO 12080-2-2000 |
干脫脂奶.維生素A含量的測定.高性能液相色譜法 |
Dried skimmed milk - Determination of vitamin A content - Method using high-performance liquid chromatography |
| BS ISO 12081-1999 |
牛奶.鈣含量的測定.滴定法 |
Milk - Determination of calcium content - Titrimetric method |
| BS ISO 12097-1-2003 |
道路車輛.安全氣囊零部件.詞匯 |
(Road vehicles - Airbag components - Vocabulary) |
| BS ISO 12097-3-2003 |
道路車輛.氣囊零部件.充氣機組件的檢驗 |
(Road vehicles - Airbag components - Testing of inflator assemblies) |
| BS ISO 12103-1-1998 |
道路車輛.過濾器評價塵土試驗.第1部分:塵土試驗方法 |
(Road vehicles - Test dust for filter evaluation - Arizona test dust) |
| BS ISO 12103-2-1998 |
道路車輛.過濾器評定用試驗粉塵.氧化鋁試驗粉塵 |
Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
| BS ISO 12107-2003 |
金屬材料.疲勞試驗.數據的統計規劃和分析 |
(Metallic materials - Fatigue testing - Statistical planning and analysis of data) |
| BS ISO 12108-2003 |
金屬材料.疲勞試驗.疲勞裂痕增長試驗 |
(Metallic materials - Fatigue testing - Fatigue crack growth method) |
| BS ISO 12124-2001 |
聲學.助聽器真耳聲學特性測量的過程 |
(Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids) |
| BS ISO 12128-2002 |
滑動軸承.潤滑油孔、油槽油穴.軸襯的尺寸、類型、標記及其應用 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
| BS ISO 12129-2-1995 |
滑動軸承.軸、法蘭和止推安裝環的形狀、位置和表面粗糙度的公差 |
Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
| BS ISO 12132-2000 |
滑動軸承.薄壁軸瓦質量評價.FMEA設計 |
Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
| BS ISO 12140-1999 |
農業機械.農用掛車和拖掛設備.牽引機構 |
(Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks) |
| BS ISO 12141-2002 |
固定污染源的排放.在低濃度時顆粒物質(灰塵)的質量濃度的測定.手工重量分析法 |
(Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method) |
| BS ISO 12142-2001 |
電子成像.驗證光盤上存儲的數據用介質誤差監測和報告技術 |
Electronic imaging - Media error monitoring and reporting techniques for verification of stored data on optical digital data disks |
| BS ISO 12151-1-1999 |
液壓流體力學和一般用途的連接件.軟管配件.有ISO 8434-3 O型環對接密封端的軟管組件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
| BS ISO 12151-2-2003 |
液壓傳動和通用聯接件.軟管接頭.帶ISO 8434-1和ISO 8434-4 O形圈24錐形末端的軟管接頭 |
(Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ?cone connector ends with O-rings) |
| BS ISO 12151-3-1999 |
液壓流體力學和一般應用的連接件.軟管配件.帶ISO 6162法蘭末端的軟管配件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
| BS ISO 12156-2-1999 |
柴油.高頻往復鉆機(HFRR)用潤滑劑性能評定.第2部分:極限值 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Limit |
| BS ISO 12164-1-2002 |
帶法蘭接觸面的空心圓錐界面.刀柄.尺寸 |
Hollow taper interface with flange contact surface - Shanks - Dimensions |
| BS ISO 12164-2-2002 |
帶法蘭接觸面的空心圓錐界面.接收器.尺寸 |
Hollow taper interface with flange contact surface - Receivers - Dimensions |
| BS ISO 12165-2000 |
鑄模工具.壓縮、注模和壓鑄模用件.術語和符號 |
Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols |
| BS ISO 1217-1997 |
容積式壓縮機.驗收試驗 |
Displacement compressors - Acceptance tests |
| BS ISO 12171-2002 |
空間數據和信息傳輸系統.遙控指令.信道服務 |
(Space data and information transfer systems - Telecommand - Channel service) |
| BS ISO 12172-2003 |
空間數據和信息傳輸系統.遙控.數據路由服務 |
(Space data and information transfer systems - Telecommand - Data routing service) |
| BS ISO 12173-2003 |
空間數據和信息傳輸系統.遙控.指令執行程序 |
(Space data and information transfer systems - Telecommand - Command operation procedures) |
| BS ISO 12174-2003 |
空間數據和信息傳輸系統.遙控.數據管理業務的體系規范 |
(Space data and information transfer systems - Telecommand - Architectural specification for the data management service) |
| BS ISO 1219-2-1996 |
流體動力系統和件.圖形符號和電路圖.第2部分:電路圖 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Circuit diagrams |
| BS ISO 12192-2002 |
紙和紙板.壓縮強度.環壓法 |
Paper and board - Compressive strength - Ring crush method |
| BS ISO 12197-1997 |
半圓鍵槽銑刀.尺寸 |
Woodruff keyseat cutters - Dimensions |
| BS ISO 12199-2002 |
用阿拉伯字母表示的多語種術語和字典編輯的數字的字母順序 |
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet |
| BS ISO 12213-1-1998 |
天然氣.壓縮系數的計算.介紹和導則 |
Natural gas - Calculation of compression factors - Introduction and guidelines |
| BS ISO 12213-2-1998 |
天然氣.壓縮因數的計算.第2部分:摩爾代數運算分析 |
Natural gas - Calculation of compression factors - Calculation using a molar composition analysis |
| BS ISO 12213-3-1998 |
天然氣.壓縮系數的計算.實測物理性能計算 |
Natural gas - Calculation of compression factors - Calculation using measured physical properties |
| BS ISO 12214-2002 |
道路車輛.汽車手控裝置的轉向指示器 |
Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| BS ISO 12218-1997 |
制圖技術.過程控制.膠印板標記 |
Graphic technology - Process control - Offset platemaking |
| BS ISO 1222-2003 |
攝影.三腳架連接件 |
(Photography - Tripod connections) |
| BS ISO 12222-2001 |
電影攝影.在16mm、35mm和65mm電影膠片上制造廠名的印制和潛在影象的識別.規范和尺寸 |
Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film - Specifications and dimensions |
| BS ISO 1223-1995 |
電影技術.供電視用電影膠片和幻燈片的畫面.位置和尺寸 |
Cinematography - Picture areas for motion-picture films and slides for television - Position and dimensions |
| BS ISO 1223-2003 |
電影技術.電視用影片畫面.位置和尺寸 |
(Cinematography - Picture areas for motion-picture films for television - Position and dimensions) |
| BS ISO 12231-1997 |
攝影.電子照相機.術語 |
Photography - Electronic still picture cameras - Terminology |
| BS ISO 12232-1998 |
攝影.電子靜物攝影照相機.ISO速度測定 |
Photography - Electronic still-picture cameras - Determination of ISO speed |
| BS ISO 12233-2000 |
攝影.電子靜物照相機.分辨率測量 |
Photography - Electronic still picture cameras - Resolution measurements |
| BS ISO 12234-1-2002 |
電子靜態圖像的成象.可裝卸存儲器.基本可裝卸存儲器模型 |
Electronic still-picture imaging - Removable memory - Basic removable-memory module |
| BS ISO 12234-2-2001 |
電子靜止畫面成像.可去除存儲.TIFF/EP圖像數據格式 |
Electronic still-picture imaging - Removable memory - TIFF/EP image data format |
| BS ISO 12238-2001 |
氣壓液動.方向控制閥門.轉換時間的測量 |
(Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
| BS ISO 12240-1-1998 |
關節軸承.徑向關節軸承 |
Spherical plain bearings - Radial spherical plain bearings |
| BS ISO 12240-2-1998 |
關節軸承.角面接觸徑向關節軸承 |
Spherical plain bearings - Angular contact radial spherical plain bearings |
| BS ISO 12240-3-1998 |
關節軸承.止推關節軸承 |
(Spherical plain bearings - Thrust spherical plain bearings) |
| BS ISO 12240-4-1998 |
關節軸承.徑向關節軸承桿端 |
(Spherical plain bearings - Spherical plain bearing rod ends) |
| BS ISO 12256-2002 |
內十字形槽扳手.米制系列 |
(Drives, internal, cruciform, ribbed - Metric series) |
| BS ISO 12277-2000 |
航空航天.帶鏜孔標準系列浮動自鎖定同軸槽鐵.等級:1100 MPa(室溫)/120℃、1100 MPa(室溫)/235℃、1100 MPa( |
(Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications - 1100 MPa (at ambient temperature)/120 ℃, 1100 MPa (at ambient temperature)/235℃ and 1100 MPa () |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com