標準號 |
中文名稱 |
英文名稱 |
| ISO 140-8-1997 |
聲學.建筑物和建筑構件的隔音測量.第8部分:減少對標準地面覆蓋層的撞擊噪音傳播的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor) |
| ISO 140-9-1985 |
聲學.建筑物和建筑構件的隔音測量.第9部分:懸吊式天花板上有壓力通風的室對室氣載音響隔離的實驗室測量 |
(Acoustics; Measurements of sound insulation in buildings and of building elements; Part 9 : Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it) |
| ISO 14001-1996 |
環境管理系統.應用指南規范 |
(Environmental management systems - Specification with guidance for use) |
| ISO 14001-2004 |
環境管理體系.要求及使用指南 |
|
| ISO 14004-1996 |
環境管理系統.原理、系統和技術支持通用指南 |
(Environmental management systems - General guidelines on principles, systems and supporting techniques) |
| ISO 14004-2004 |
環境管理體系.原理、體系與支持技術指南 |
|
| ISO 14004-2004 |
環境管理體系.原理、體系與支持技術指南 |
|
| ISO 1401-1999 |
農業噴霧機用橡膠軟管 |
(Rubber hoses for agricultural spraying) |
| ISO 14015-2001 |
環境管理.場所和組織機構的環境評定 |
(Environmental management - Environmental assessment of sites and organizations (EASO)) |
| ISO 1402-1994 |
橡膠和塑料軟管及軟管組件液壓靜力試驗 |
(Rubber and plastics hoses and hose assemblies - Hydrostatic testing) |
| ISO 14020-2000 |
環境標簽和說明.一般原則 |
(Environmental labels and declarations - General principles) |
| ISO 14021-1999 |
環境標簽和聲明.自聲明的環境要求(II型環境標簽) |
(Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)) |
| ISO 14024-1999 |
環境標簽和聲明:I型環境標簽.規則和過程 |
(Environmental labels and declarations - Type I environmental labelling - Principles and procedures) |
| ISO 1403-1995 |
一般用途的織物增強的輸水橡膠軟管.規范 |
(Rubber hoses, textile-reinforced, for general-purpose water applications - Specification) |
| ISO 14031-1999 |
環境管理.環境性能評價.指南 |
(Environmental management - Environmental performance evaluation - Guidelines) |
| ISO 14040-1997 |
環境管理.生物圈評價.原則和框架 |
(Environmental management - Life cycle assessment - Principles and framework) |
| ISO 14041-1998 |
環境管理.生物圈評價.目標和范圍的定義及資源分析 |
(Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis) |
| ISO 14042-2000 |
環境管理.生物圈評定.生物圈影響評定 |
(Environmental management - Life cycle assessment - Life cycle impact assessment) |
| ISO 14043-2000 |
環境管理.生物圈評定.生物圈解釋 |
(Environmental management - Life cycle assessment - Life cycle interpretation) |
| ISO 14050-2002 |
環境管理.詞匯 |
(Environmental management - Vocabulary) |
| ISO 1407-1992 |
橡膠.溶劑萃液的測定 |
(Rubber; determination of solvent extract) |
| ISO 1408-1995 |
橡膠.炭黑含量的測定.熱解的和化學的降解法 |
(Rubber - Determination of carbon black content - Pyrolytic and chemical degradation methods) |
| ISO 1409-1995 |
塑料/橡膠.聚合物的含水分散體和橡膠膠乳(天然的和合成的).用環形試驗法測定表面張力 |
(Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method) |
| ISO 141-1976 |
紡織機械和附件.卷緯機和交叉卷繞絡筒機.左、右側的定義 |
(Textile machinery and accessories; Pirn winders and cross winders; Definition of left and right sides) |
| ISO 14111-1997 |
天然氣.示蹤分析用導則 |
(Natural gas - Guidelines for traceability in analysis) |
| ISO 14112-1996 |
氣焊設備.氣硬焊和氣焊用小型設備 |
(Gas welding equipment - Small kits for gas brazing and welding) |
| ISO 14113-1997 |
氣焊設備.能承受最大檢驗設計氣壓為450巴的壓縮和液化氣用橡膠和塑料軟管組件 |
(Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar) |
| ISO 14114-1999 |
氣焊設備.焊接,切割和連接過程的乙炔多功能系統.一般要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements) |
| ISO 14118-2000 |
機械安全.意外啟動的防護 |
(Safety of machinery - Prevention of unexpected start-up) |
| ISO 14119-1998 |
機械安全.有關保護聯索緊裝置.設計和選則原則 |
(Safety of machinery - Interlocking devices associated with guards - Principles for design and selection) |
| ISO 14120-2002 |
機械安全.保護裝置.固定和可移動保護裝置的設計和制造的一般要求 |
(Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards) |
| ISO 14121-1999 |
機械安全.風險評估規則 |
(Safety of machinery - Principles of risk assessment) |
| ISO 14122-1-2001 |
機器安全.機器接近的固定方式.第1部分:兩種水平之間的固定方式的選擇 |
(Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels) |
| ISO 14122-2-2001 |
機器安全.機器接近的固定方式.第2部分:工作平臺和通路 |
(Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways) |
| ISO 14122-3-2001 |
機器安全.機器接近的固定方式.第3部分:樓梯,梯子和護欄 |
(Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails) |
| ISO 14122-4-2004 |
機械安全.接近機械的固定方式.第4部分:固定梯 |
|
| ISO 14122-4-2004 |
機械安全.接近機械的固定方式.第4部分:固定梯 |
|
| ISO 14123-1-1998 |
機械安全.機械發射有害物質對健康危害的減少.第1部分:機械制造的原則和規范 |
(Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers) |
| ISO 14123-2-1998 |
機械安全.機械發射有害物質對健康危害的減少.第2部分:檢定程序的主要工藝 |
(Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures) |
| ISO 14125 Technical Corrigendum 1-2001 |
纖維增強塑料.彎曲性能測定.技術勘誤1 |
(Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1) |
| ISO 14125-1998 |
纖維增強塑料復合材料.撓性性能的測定 |
(Fibre-reinforced plastic composites - Determination of flexural properties) |
| ISO 14126 Technical Corrigendum 1-2001 |
纖維增強塑料組成.壓縮性能的測定.技術勘誤1 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction; Technical corrigendum 1) |
| ISO 14126-1999 |
纖維增強塑料混合物.水平方向壓縮能力的測定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction) |
| ISO 14129-1997 |
纖維增強塑料復合物.用45°拉伸試驗方法測定包括平面剪切模數和強度在內的平面剪切應力/剪應變反應 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ?5?tension test method) |
| ISO 1413-1984 |
計時儀器.防震表 |
(Horology; Shock-resistant watches) |
| ISO 14130 Technical Corrigendum 1-2003 |
纖維增強塑料復合材料.用短試片法測定表觀層間粘合剪切強度.技術勘誤1 |
(Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method; Technical Corrigendum 1) |
| ISO 14130 Technical Corrigendum 1-2003 |
纖維增強塑料復合材料.用短試片法測定表觀層間粘合剪切強度.技術勘誤1 |
|
| ISO 14130-1997 |
纖維增強塑料合成物.短梁層間切變強度法 |
(Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method) |
| ISO 14132-1-2002 |
光學和光學儀器.望遠鏡設備詞匯.第1部分:通用術語和ISO 14132中術語的字母索引 |
(Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO 14132) |
| ISO 14132-2-2002 |
光學和光學儀器.望遠鏡設備詞匯.第2部分:雙筒望遠鏡、單筒望遠鏡和定位觀測望遠鏡的術語 |
(Optics and optical instruments - Vocabulary for telescopic systems - Part 2: Terms for binoculars, monoculars and spotting scopes) |
| ISO 14132-3-2002 |
光學和光學儀器.望遠鏡設備詞匯.第3部分:望遠鏡視野的術語 |
(Optics and optical instruments - Vocabulary for telescopic systems - Part 3: Terms for telescopic sights) |
| ISO 14132-4-2002 |
光學和光學儀器.望遠鏡設備詞匯.第4部分:天文望遠鏡的術語 |
(Optics and optical instruments - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes) |
| ISO 14135-1-2003 |
光學及光學儀器.望遠鏡瞄準具規范.第1部分:通用儀器 |
(Optics and optical instruments - Specifications for telescopic sights - Part 1: General-purpose instruments ) |
| ISO 14135-1-2003 |
光學及光學儀器.望遠鏡瞄準具規范.第1部分:通用儀器 |
|
| ISO 14135-2-2003 |
光學及光學儀器.望遠鏡瞄準具規范.第2部分:高性能儀器 |
(Optics and optical instruments - Specifications for telescopic sights - Part 2: High-performance instruments ) |
| ISO 14135-2-2003 |
光學及光學儀器.望遠鏡瞄準具規范.第2部分:高性能儀器 |
|
| ISO 14137-2000 |
機床.金屬線放電加工機床的試驗條件.術語和準確度試驗 |
(Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy) |
| ISO 14139-2000 |
液體比重計的測定.使用結構的明渠流量測量.真空壓力結構 |
(Hydrometric determinations - Flow measurements in open channels using structures - Compound gauging structures) |
| ISO 14145-1-1998 |
園珠筆及其筆芯.第1部分:一般用途 |
(Roller ball pens and refills - Part 1: General use) |
| ISO 14145-2-1998 |
園珠筆及其筆芯.第2部分:公文寫作用 |
(Roller ball pens and refills - Part 2: Documentary use (DOC)) |
| ISO 14146-2000 |
輻射保護.Χ輻射和γ輻射的個人劑量?jī)x處理器的期間性評價的標準和性能規范 |
(Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation) |
| ISO 14152-2001 |
中子輻射防護屏蔽.選擇適用材料用的設計原則和考慮 |
(Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials) |
| ISO 14155-1-2003 |
人用醫療設備的臨床調查.第1部分:一般要求 |
(Clinical investigation of medical devices for human subjects - Part 1: General requirements) |
| ISO 14155-1-2003 |
人用醫療設備的臨床調查.第1部分:一般要求 |
|
| ISO 14155-2-2003 |
醫學受驗者用醫療器械的臨床調查.第2部分:臨床調查設備 |
(Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plants) |
| ISO 14155-2-2003 |
醫學受驗者用醫療器械的臨床調查.第2部分:臨床調查設備 |
|
| ISO 14156-2001 |
奶和奶制品.脂類和脂類化合物的萃取法 |
(Milk and milk products - Extraction methods for lipids and liposoluble compounds) |
| ISO 14159-2002 |
機械安全.機械設計的衛生要求 |
(Safety of machinery - Hygiene requirements for the design of machinery) |
| ISO 14160-1998 |
一次性醫用設備混合動物源材料的消毒.液體消毒液消毒的確認和常規管理 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid sterilants) |
| ISO 14161-2000 |
醫療保健產品的消毒.生物指示器.結果的選擇、使用和解釋的指南 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results) |
| ISO 14163-1998 |
聲學.消音器噪聲控制指南 |
(Acoustics - Guidelines for noise control by silencers) |
| ISO 14164-1999 |
穩定源排放.管道中氣流容積流量比率測定.自動配置方法 |
(Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method) |
| ISO 14168-2003 |
硬金屬除外的金屬粉末.銅基滲透粉末的試驗方法 |
(Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders) |
| ISO 14168-2003 |
硬金屬除外的金屬粉末.銅基滲透粉末的試驗方法 |
|
| ISO 14171-2002 |
焊料.非合金鋼和細粒鋼埋弧焊用焊絲和焊絲-焊劑混合物.分類 |
(Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification) |
| ISO 14172 Technical Corrigendum 1-2004 |
焊接消耗品.鎳和鎳合金的手工金屬弧焊接用涂覆電極.分類.技術勘誤1 |
|
| ISO 14172-2003 |
焊接消耗品.鎳及鎳合金金的手工電弧焊接用涂敷焊條.分類 |
(Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification) |
| ISO 14172-2003 |
焊接消耗品.鎳及鎳合金的手工電弧焊接用涂敷焊條.分類 |
|
| ISO 14174-2004 |
焊接消耗品.埋弧焊用助熔劑.分類 |
|
| ISO 14175-1997 |
焊接用料.電弧焊接和切割用保護氣體 |
(Welding consumables - Shielding gases for arc welding and cutting) |
| ISO 14180-1998 |
固體礦物燃料.煤層取樣指南 |
(Solid mineral fuels - Guidance on the sampling of coal seams) |
| ISO 14181-2000 |
動物飼料.有機氯化物農藥殘留物的測定.氣相色譜法 |
(Animal feeding stuffs - Determination of residues of organochloride pesticides - Gas chromatographic method) |
| ISO 14182-1999 |
動物飼料.有機磷農藥的殘留物的測定.氣相色譜法 |
(Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method) |
| ISO 14184-1-1998 |
織物.甲醛的測定.第1部分:自由和水解態甲醛(水抽提法) |
(Textiles - Determination of formaldehyde - Part 1: Free and hydrolized formaldehyde (water extraction method)) |
| ISO 14184-2-1998 |
織物.甲醛測定.第2部分:釋放的甲醛(蒸氣吸收法) |
(Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method)) |
| ISO 1419-1995 |
橡膠或塑料涂層織物.加速老化試驗 |
(Rubber- or plastics-coated fabrics - Accelerated-ageing tests) |
| ISO 14190-1998 |
航空航天.飛機機架用滾動軸承:滾珠滾柱軸承和球面滾柱軸承.技術規范 |
(Aerospace - Airframe rolling bearings: Ball and spherical roller bearings - Technical specification) |
| ISO 14191-1998 |
航空航天.飛機機架用直徑系列3和4的單列自位球面滾柱軸承.米制系列 |
(Aerospace - Airframe spherical roller bearings, single-row, self-aligning, diameter series 3 and 4 - Metric series) |
| ISO 14192-1998 |
航空航天.飛機機架用單列自位中等負荷防塵球面滾柱軸承.米制系列 |
(Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series) |
| ISO 14193-1998 |
航空航天.飛機機架用中等負荷擴展內圈單列自位密封球面滾柱軸承.英尺系列 |
(Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series) |
| ISO 14194-1998 |
航空航天.飛機機架用重負荷擴展內圈自位雙列密封球面滾柱軸承.英尺系列 |
(Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series) |
| ISO 14195-1998 |
航空航天.飛機機架用輕負荷有扭距管設計的自位雙列密封球面滾柱軸承.英尺系列 |
(Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, torque tube design, light duty - Inch series) |
| ISO 14196-1998 |
航空航天.飛機機架用重負荷平內圈自位雙列密封球面滾柱軸承.英尺系列 |
(Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty - Inch series) |
| ISO 14197-1998 |
航空航天.飛機機架用中等負荷自位單列密封球面滾柱軸承.英尺系列 |
(Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, intermediate duty - Inch series) |
| ISO 142-1976 |
紡織機械和附件.預編織機械.左、右側的定義 |
(Textile machinery and accessories; Weaving preparatory machines; Definition of left and right sides) |
| ISO 1420-2001 |
橡膠或塑料涂覆織物.耐水滲透性測定 |
(Rubber- or plastics-coated fabrics - Determination of resistance to penetration by water) |
| ISO 14201-1998 |
航空航天.飛機機架用直徑系列2的自位雙列滾珠軸承.米制系列 |
(Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2 - Metric series) |
| ISO 14202-1998 |
航空航天.飛機機架用直徑系列0和2的單列剛性滾珠軸承.米制系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 - Metric series) |
| ISO 14203-1998 |
航空航天.機架用直徑系列8和9的單列剛性滾珠軸承.米制系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series) |
| ISO 14204-1998 |
航空航天.飛機機架用直徑系列0的雙列剛性滾珠軸承.米制系列 |
(Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 - Metric series) |
| ISO 14206-1998 |
航空航天.飛機機架用輕負荷單列剛性密封滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series) |
| ISO 14207-1998 |
航空航天.機架用輕負荷密封精密單列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series) |
| ISO 14208-1998 |
航空航天.機架用中度負荷密封單列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series) |
| ISO 14209-1998 |
航空航天.機架用中度負荷密封精密單列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series) |
| ISO 1421-1998 |
橡膠或塑料涂層織物.拉伸強度和斷裂伸長的測定 |
(Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break) |
| ISO 14210-1998 |
航空航天.機架用有扭矩管設計的輕負荷密封單列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series) |
| ISO 14211-1998 |
航空航天.飛機機架用輕負荷有扭矩管設計的單列剛性密封精密滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series) |
| ISO 14212-1998 |
航空航天.機架用有扭矩管設計的超輕負荷密封單列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series) |
| ISO 14213-1998 |
航空航天.機架用有扭矩管設計的超輕負荷密封精密單列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra light duty - Inch series) |
| ISO 14214-1998 |
航空航天.機架用重負荷密封雙列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series) |
| ISO 14215-1998 |
航空航天.機架用重負荷密封精密雙列剛性滾珠軸承.英尺系列 |
(Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series) |
| ISO 14216-1998 |
航空航天.機架用重負荷密封雙列自調心球軸承.英尺系列 |
(Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series) |
| ISO 14217-1998 |
航空航天.機架用重負荷密封精密雙列自調心球軸承.英尺系列 |
(Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series) |
| ISO 14218-1998 |
航空航天.機架用重負荷密封單列自調心球軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series) |
| ISO 14219-1998 |
航空航天.機架用重負荷密封精密單列自調心球軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series) |
| ISO 14220-1998 |
航空航天.機架用輕負荷密封單列自調心球軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series) |
| ISO 14221-1998 |
航空航天.機架用輕負荷密封精密單列自調心球軸承.英尺系列 |
(Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series) |
| ISO 14223-1-2003 |
動物的射頻識別.高級應答機.第1部分:空中接口 |
(Radiofrequency identification of animals - Advanced transponders - Part 1: Air interface) |
| ISO 14223-1-2003 |
動物的射頻識別.高級應答機.第1部分:空中接口 |
|
| ISO 14224-1999 |
石油和天然氣工業.設備可靠性和維護數據的收集和交換 |
(Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com