標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 8502-6-1999 |
涂層材料使用前的鋼料表面的清理準備.表面清潔度評定的檢驗.第6部分:分析用可溶于水的雜質的萃取,布雷斯勒法(Bresle) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis; the Bresle method (ISO 8502-6:1995); German version EN ISO 8502- |
| DIN EN ISO 8502-9-2001 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度評定試驗.第9部分:水溶性鹽熱導測定的現場方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO |
| DIN EN ISO 8503-1-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第1部分:噴砂處理表面的 ISO評定比較樣板的規范和定義 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra |
| DIN EN ISO 8503-2-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第2部分:噴砂處理表面的定級方法.比較方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator proced |
| DIN EN ISO 8503-3-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第3部分:ISO表面輪廓比較儀的校準方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
| DIN EN ISO 8503-4-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第4部分:ISO表面輪廓比較儀的校準方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
| DIN EN ISO 8504-1-2002 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第1部分:總則 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001) |
| DIN EN ISO 8504-2-2002 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第2部分:噴砂清理 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001) |
| DIN EN ISO 8504-3-2002 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第3部分:手工工具和電動工具清洗 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993); German version EN ISO 8504-3:2001) |
| DIN EN ISO 8536-1-2004 |
醫用輸液設備.第1部分:輸液玻璃瓶 |
|
| DIN EN ISO 8536-2 Berichtigung 1-2005 |
醫用輸液設備.第2部分:輸液瓶塞.DIN EN ISO 8536-2-2003的勘誤 |
|
| DIN EN ISO 8536-2-2003 |
醫用輸液設備.第2部分:輸液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001); German version EN ISO 8536-2:2002, German and English texts |
| DIN EN ISO 8536-8-2005 |
醫用輸液器具.第8部分:有壓力輸液儀的輸液器具 |
|
| DIN EN ISO 8537-2001 |
胰導素注射用的有或無針頭的滅菌一次性使用注射器. |
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:1991) (including Amendment AMD 1:2000); German version EN ISO 8537:1994 + A1:2000 |
| DIN EN ISO 8561-1996 |
家用無霜制冷設備.強制循環冷卻的冰箱,制冷機,冷凍機和低溫制冷機.性能和測試方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995); German version EN ISO 8561:1 |
| DIN EN ISO 8561/A1-1998 |
家用無霜制冷設備.制冷機,制冷機冷藏柜,冷凍食品儲藏柜和用內壓力空氣循環冷卻的食品冷藏柜特性和試驗方法.補充件1:強易腐蝕品防腐用特殊冷凍箱 |
|
| DIN EN ISO 8565-1995 |
金屬和合金.大氣腐蝕試驗.野外試驗的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992); German version EN ISO 8565-1995 |
| DIN EN ISO 8580-1995 |
橡膠和塑料軟管.穩定狀態下抗紫外線的測定 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995) |
| DIN EN ISO 8596-1996 |
眼科光學.視力檢驗.標準視力符號及其演示 |
(Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994); German version EN ISO 8596:1996) |
| DIN EN ISO 8597-1996 |
眼科光學.視力檢驗.視力符號相關連接方法 |
(Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995); German version EN ISO 8597:1996) |
| DIN EN ISO 8598-1998 |
光學和光學儀器.焦距計 |
(Optics and optical instruments - Focimeters (ISO 8598:1996); Deutsche Fassung EN ISO 8598:1998) |
| DIN EN ISO 8599-1997 |
光學和光學儀器.接觸鏡片.光譜透射率和光透射率的測定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994); German version EN ISO 8599:1996 |
| DIN EN ISO 8611-1-2004 |
物料搬運用托盤.平托盤.第1部分:試驗方法 |
|
| DIN EN ISO 8612-2001 |
眼科裝置.眼壓計 |
Ophthalmic instruments - Tonometers (ISO 8612:2001); German version EN ISO 8612:2001 |
| DIN EN ISO 8618-1998 |
塑料.液態酚醛樹脂.非揮發性物質的常規測定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995); German version EN ISO 8618:1998 |
| DIN EN ISO 8619-1998 |
塑料.酚醛樹脂粉.在加熱玻璃板上流動距離的測定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:1995); German version EN ISO 8619:1998 |
| DIN EN ISO 8624-2002 |
眼科光學.眼鏡架.測量系統和術語 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002); German version EN ISO 8624:2002 |
| DIN EN ISO 8655-1-2002 |
活塞式容量測量儀器.第1部分:術語、一般要求和用戶使用建議 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002); German version EN ISO 8655-1:2002 |
| DIN EN ISO 8655-2-2002 |
活塞式容量測量儀器.第2部分:活塞式吸量管 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002); German version EN ISO 8655-2:2002 |
| DIN EN ISO 8655-3-2002 |
活塞式容量測量儀器.第3部分:活塞式玻璃量管 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002); German version EN ISO 8655-3:2002 |
| DIN EN ISO 8655-4-2002 |
活塞式容量測量儀器.第4部分:稀釋器 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002); German version EN ISO 8655-4:2002 |
| DIN EN ISO 8655-5-2002 |
活塞式容量測量儀器.第5部分:分配器 |
Piston-operated volumetric apparatus - Part 5: Dispenser (ISO 8655-5:2002); German version EN ISO 8655-5:2002 |
| DIN EN ISO 8655-6-2002 |
活塞式容量測量儀器.第6部分:確定測量誤差的重量分析法 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002 |
| DIN EN ISO 8655-7-2005 |
活塞式容量測量儀器.第7部分:評估設備性能用非重量測量法(ISO 8655-1-2005); 德文版本 EN ISO 8655-1-2005 |
|
| DIN EN ISO 8662-10 Berichtigung 1-2002 |
DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002)勘誤 |
Corrigenda to DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002) |
| DIN EN ISO 8662-10-1999 |
手提電動工具.手柄振動測量.第10部分:步?jīng)_輪廓機和剪切機械 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998); German version EN ISO 8662-10:1998 |
| DIN EN ISO 8662-12-1997 |
便攜式手提動力工具.手柄振動測量.第12部分:有往復作用的鋸和銼和有擺動或旋轉作用的鋸 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997); German version EN ISO 8662-12:1997 |
| DIN EN ISO 8662-13 Berichtigung 1-1999 |
對DIN EN ISO 8662-13:1997-10的校正 |
Corrigenda to DIN EN ISO 8662-13:1997-10 (EN ISO 8662-13:1997/AC:1998) |
| DIN EN ISO 8662-13-1997 |
便攜式手提動力工具.手柄振動測量.第13部分:模具研模機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997); German version EN ISO 8662-13:1997 |
| DIN EN ISO 8662-14-1997 |
便攜式手提動力工具.手柄機械振動的測量.第14部分:石料加工機和針式標定器 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996); German version EN ISO 8662-14:1996 |
| DIN EN ISO 8662-4-1995 |
便攜式手提動力工具.手柄振動的測量.第4部分:磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994); German version EN ISO 8662-4:1995 |
| DIN EN ISO 8662-6-1995 |
便攜式手提動力工具.手柄振動的測量.第6部分:沖擊式鉆機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994); German version EN ISO 8662-6:1995 |
| DIN EN ISO 8662-7-1997 |
便攜式手提動力工具.手柄振動測量.第7部分:扳手,旋具與具有沖擊,沖力和刻踞齒作用的螺紋滾子 |
Hand-held portable power tools - Measurement of vibration at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or rachet action (ISO 8662-7:1997); German version EN ISO 8662-7:1997 |
| DIN EN ISO 8662-8-1997 |
便攜式手提動力工具.手柄振動測量.第8部分:拋光和旋轉,軌道和隨機軌道砂輪機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997); German version EN ISO 8662-8:1997 |
| DIN EN ISO 8662-9-1997 |
便攜式手提動力工具.手柄振動的測量.第9部分:夯實機 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996); Deutsche Fassung EN ISO 8662-9:1996 |
| DIN EN ISO 8665 Berichtigung 1-2001 |
DIN EN ISO 8665-1995的勘誤 |
Corrigendum to DIN EN ISO 8665:1995 (German version EN ISO 8665:1995/A1:2000) |
| DIN EN ISO 8665-1995 |
小型船舶.船舶驅動電動機和裝置.功率測量和說明 |
Small craft - Marine propulsion engines and systems - Power measurements and declarations (ISO 8665:1994); German version EN ISO 8665:1995 |
| DIN EN ISO 8666-2003 |
小艇.主要數據 |
Small craft - Principal data (ISO 8666:2002); German version EN ISO 8666:2002 |
| DIN EN ISO 8669-2-1997 |
尿收集袋.第2部分:要求和試驗方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996); German version EN ISO 8669-2:1996 |
| DIN EN ISO 8670-2-1997 |
造口術收集袋.第2部分:要求和試驗方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996); German version EN ISO 8670-2:1996 |
| DIN EN ISO 8673-2001 |
有米制細牙螺紋的1型六角螺母.產品等級A和B |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999); German version EN ISO 8673:2000 |
| DIN EN ISO 8674-2001 |
有米制細牙螺紋的2型六角螺母.產品等級A和B |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000 |
| DIN EN ISO 8675-2001 |
有米制細牙螺紋的六角薄螺母(倒角).產品等級A和B |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000 |
| DIN EN ISO 8676-2001 |
有米制細牙螺紋的六角頭螺釘.產品等級A和B |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000 |
| DIN EN ISO 868-1998 |
塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度) |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985); German version EN ISO 868:1997 |
| DIN EN ISO 8689-1-2000 |
水質.江河的生物分類.第1部分:對海底大型無脊椎動物調查的生物質量數據的解釋指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000); German version EN ISO 8689-1:2000 |
| DIN EN ISO 8689-2-2000 |
水質.江河的生物分類.第2部分:對海底大型無脊椎動物調查的生物質量數據的表示指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000); German version EN ISO 8689-2:2000 |
| DIN EN ISO 8692-2005 |
水質.用單細胞綠藻進行淡水藻類生長抑制性試驗 |
|
| DIN EN ISO 8728-1999 |
造船和航海技術.航海用陀螺羅盤 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997); German version EN ISO 8728:1998 |
| DIN EN ISO 8729-1999 |
造船和航海技術.海上雷達反光鏡 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997); German version EN ISO 8729:1998 |
| DIN EN ISO 8733-1998 |
未淬硬鋼或奧氏體不銹鋼制帶內螺孔的平行銷 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
| DIN EN ISO 8734-1998 |
淬硬鋼和馬氏體不銹鋼制平行銷 |
Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
| DIN EN ISO 8735-1998 |
淬硬鋼和馬氏體不銹鋼制帶內螺紋的平行銷 |
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
| DIN EN ISO 8739-1998 |
槽銷.帶導向的全長平行槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997 |
| DIN EN ISO 8740-1998 |
槽銷.帶倒角的全長平行槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997 |
| DIN EN ISO 8741-1998 |
槽銷.半長倒錐槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997 |
| DIN EN ISO 8742-1998 |
槽銷.三分之一長中心槽 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997 |
| DIN EN ISO 8743-1998 |
槽銷.半長中心槽 |
Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997 |
| DIN EN ISO 8744-1998 |
槽銷.全長錐型槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997 |
| DIN EN ISO 8745-1998 |
槽銷.半長錐型槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997 |
| DIN EN ISO 8746-1998 |
圓頭槽銷 |
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 |
| DIN EN ISO 8747-1998 |
沉頭槽銷 |
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997 |
| DIN EN ISO 8748-1998 |
彈簧型開口直銷.重載盤繞式 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997); German version EN ISO 8748:1997 |
| DIN EN ISO 8750-1998 |
彈簧型開口直銷.標準負荷盤繞式 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997); German version EN ISO 8750:1997 |
| DIN EN ISO 8751-1998 |
彈簧型開口直銷.輕負荷盤繞式 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997); German version EN ISO 8751:1997 |
| DIN EN ISO 8752-1998 |
彈簧直銷.開槽重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997 |
| DIN EN ISO 8754-1995 |
石油產品.硫含量測定.能量分散X射線熒光法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence method (ISO 8754:1992); German version EN ISO 8754:1995 |
| DIN EN ISO 8765-2001 |
有米制細牙螺紋的六角頭螺栓.產品等級A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000 |
| DIN EN ISO 877-1997 |
塑料.自然風化法,窗玻璃后照射法和用夫累內爾鏡光照輻射加速風化法 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994): German version EN ISO 877:1996 |
| DIN EN ISO 8780-1-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第1部分:前言 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990); German version EN ISO 8780-1:1995 |
| DIN EN ISO 8780-2-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第2部分:色散用振蕩搖動機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990); German version EN ISO 8780-2:1995 |
| DIN EN ISO 8780-3-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第3部分:色散用高速葉輪機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990); German version EN ISO 8780-3:1995 |
| DIN EN ISO 8780-4-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第4部分:色散用壓片機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990); German version EN ISO 8780-4:1995 |
| DIN EN ISO 8780-5-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第5部分:色散用自動研磨機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995 |
| DIN EN ISO 8780-6-1995 |
顏料和稀釋劑.色散特性評定用色散方法.第6部分:色散用三組鎮壓機 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990); German version EN ISO 8780-6:1995 |
| DIN EN ISO 8781-1-1995 |
顏料和稀釋劑.色散特性評定方法.第1部分:有色顏料著色度變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990); German version EN ISO 8781-1:1995 |
| DIN EN ISO 8781-2-1995 |
顏料和稀釋劑.色散特性評定方法.第2部分:磨碎細度變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990); German version EN ISO 8781-2:1995 |
| DIN EN ISO 8781-3-1995 |
顏料和稀釋劑.色散特性評定方法.第3部分:光澤變化評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990); German version EN ISO 8781-3:1995 |
| DIN EN ISO 8785-1999 |
幾何制品技術規格.表面不完全性.術語、定義和參數 |
Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999 |
| DIN EN ISO 8795-2001 |
人類生活用水的塑料輸水管道系統.遷移評定.塑料管、配件及其接頭遷移值的測定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
| DIN EN ISO 8799-1995 |
表面活性劑.硫酸乙氧乙醇和硫酸乙氧烷基苯酚.非硫化物含量的測量 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988); German version EN ISO 8799:1995 |
| DIN EN ISO 8819-1995 |
液化石油氣.硫化氫的測定.醋酸鉛法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993); German version EN ISO 8819:1995 |
| DIN EN ISO 8847-2004 |
小艇.操舵裝置.鋼索和滑輪系統 |
|
| DIN EN ISO 8849-2004 |
小艇.電動直流艙底泵 |
(Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003); German version EN ISO 8849:2003) |
| DIN EN ISO 8849-2004 |
小艇.電動直流艙底泵 |
|
| DIN EN ISO 8861-1998 |
造船.柴油機船的發動機室的通風.設計要求和計算依據 |
Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998); German version EN ISO 8861:1998 |
| DIN EN ISO 887-2000 |
通用米制螺栓、螺釘和螺母用的平墊圈.一般示意圖 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000); German version EN ISO 887:2000 |
| DIN EN ISO 8871-1-2004 |
非腸道及制藥設備用彈性件.第1部分:水蒸汽中的提取物 |
|
| DIN EN ISO 8871-2-2004 |
非腸道及制藥設備用彈性件.第2部分:識別和表征 |
|
| DIN EN ISO 8871-3-2004 |
非腸道及制藥設備用彈性件.第3部分:釋放粒子計數的測定 |
|
| DIN EN ISO 8891-2000 |
貴金屬含量至少為25%但小于75%的牙科用鑄造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998); German version EN ISO 8891:2000 |
| DIN EN ISO 8892-1995 |
油料種子殘?jiān)?己烷總殘留量的測定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987); German version EN ISO 8892:1995 |
| DIN EN ISO 8968-1-2002 |
牛奶.測定氮含量.第1部分:基耶達爾法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001); German version EN ISO 8968-1:2001 |
| DIN EN ISO 8968-2-2002 |
牛奶.測定氮含量.第2部分:分段容積法(宏觀法) |
Milk - Determination of nitrogen content - Part 2: Block-digestion method (Macro method) (ISO 8968-2:2001); German version EN ISO 8968-2:2001 |
| DIN EN ISO 8968-4-2002 |
牛奶.測定氮含量.第4部分:無蛋白質的氮含量測定 |
Milk - Determination of nitrogen content - Part 4: Determination of the non-protein-nitrogen content (ISO 8968-4:2001); German version EN ISO 8968-4:2001 |
| DIN EN ISO 8968-5-2002 |
牛奶.測定氮含量.第5部分:蛋白質的氮含量測定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001); German version EN ISO 8968-5:2001 |
| DIN EN ISO 8973-2000 |
液化石油氣.密度和蒸氣壓力的計算 |
Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999 |
| DIN EN ISO 8974-2002 |
塑料.酚醛樹脂.用氣體色譜法測定殘余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002); German version EN ISO 8974:2002 |
| DIN EN ISO 898-1-1999 |
碳鋼和合金鋼制緊固件的機械性能.第1部分:螺栓,螺桿和雙頭螺栓 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
| DIN EN ISO 898-5-1998 |
碳鋼和合金鋼制連接件的機械性能.第5部分:螺銷和類似非拉伸受力的連接件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998 |
| DIN EN ISO 898-6-1996 |
緊固件的機械性能.第6部分:帶規定試驗力的螺母.細牙螺紋 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995 |
| DIN EN ISO 8980-1-1997 |
眼科光學.未打磨完成的眼鏡片.第1部分:單光多焦透鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996); German version EN ISO 8980-1:1997 |
| DIN EN ISO 8980-1-2004 |
眼科光學.未切邊成品眼鏡片.第1部分:單焦點和多焦點鏡片規范 |
|
| DIN EN ISO 8980-2-1997 |
眼科光學.未打磨完成的眼鏡片.第2部分:漸變眼鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996); German version EN ISO 8980-2:1997 |
| DIN EN ISO 8980-2-2004 |
眼科光學.未切邊成品眼鏡片.第2部分:漸變焦眼鏡片規范 |
|
| DIN EN ISO 8980-3-1999 |
眼科光學.未打磨完成的眼鏡片.第3部分:透射要求和檢驗方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999); German version EN ISO 8980-3:1999 |
| DIN EN ISO 8980-4-2000 |
眼科光學.未打磨成品柔性焦距透鏡組.第4部分:防反射涂層的試驗方法和規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000); German version EN ISO 8980-4:2000 |
| DIN EN ISO 8980-5-2005 |
眼科光學.未切邊的成品眼鏡鏡片.第5部分:眼鏡鏡片表面耐磨性的最低要求 |
|
| DIN EN ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸鹽共聚物(ENAC)熱塑性.乙烯基乙酸鹽含量的測定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998); German version EN ISO 8985:1998 |
| DIN EN ISO 8986-1-1999 |
塑料.聚丁烯模制品和擠塑材料.第1部分:命名體系與基礎規范. |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993); German version EN ISO 8986-1:1999 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com