標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 7231-1998 |
泡沫柔性聚合材料.恒定壓降下的氣流值估計法 |
Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop (ISO 7231:1984); German version EN ISO 7231:1997 |
| DIN EN ISO 7233-1995 |
橡膠和塑料軟管及軟管組件.吸引阻力測定 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 |
| DIN EN ISO 7235-1995 |
聲學.消音輸送道測量步驟.插入損耗、流動噪聲和壓力損失 |
Acoutics - Measurement procedures for ducted silencers - Insertion loss, flow noise and total pressure loss (ISO 7235:1991); German version EN ISO 7235:1995 |
| DIN EN ISO 7235-2004 |
聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003) |
| DIN EN ISO 7235-2004 |
聲學.管道消音器和空氣界面裝置的實驗室測量步驟.插入損失、流動噪聲和總壓損失 |
|
| DIN EN ISO 7250-1997 |
工藝設計相關的基本人體測量 |
Basic human body measurements for technological design (ISO 7250:1996); German version EN ISO 7250:1997 |
| DIN EN ISO 7253-2002 |
涂料和清漆.耐中性鹽霧的測定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) (ISO 7253:1996); German version EN ISO 7253:2001 |
| DIN EN ISO 7263-1995 |
瓦楞紙.試驗起瓦楞后平面耐壓的測定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994); German version EN ISO 7263:1995 |
| DIN EN ISO 7278-1-1996 |
液態烴.動態測量.容積式流量計試驗系統.第1部分:一般原理 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995 |
| DIN EN ISO 7278-2-1997 |
液態烴.動態測量.容量計用驗證系統.第2部分:管式校準儀 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988); German version EN ISO 7278-2:1995 |
| DIN EN ISO 7284-1996 |
電阻焊設備.汽車工業用多點點焊的兩個單獨副線圈的變壓器詳細規范 |
Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993); German version EN ISO 7284:1996 |
| DIN EN ISO 7287-2003 |
熱切割設備用圖形符號 |
Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002 |
| DIN EN ISO 7291-2001 |
氣體焊接設備.焊接,切割和同類過程中多方面系統的壓力調節 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999); German version EN ISO 7291:2001 |
| DIN EN ISO 7327-1997 |
塑料.環氧樹脂用固化劑和催化劑.酸酐中游離酸測定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997 |
| DIN EN ISO 7328-2000 |
奶制食用冰和冰混合物配料.脂肪含量的測定.重量分析法 |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) (ISO 7328:1999); German version EN ISO 7328:1999 |
| DIN EN ISO 734-1-2001 |
油料種子殘留物.油含量的測定.第1部分:已烷(或輕油)萃取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:1998); German version EN ISO 734-1:2000 |
| DIN EN ISO 734-2-2001 |
油料種子殘留物.油含量的測定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method (ISO 734-2:1998); German version EN ISO 734-2:2000 |
| DIN EN ISO 7345-1996 |
熱絕緣.物理量與定義 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987); German version EN ISO 7345:1995 |
| DIN EN ISO 7346-1-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))第1部分:靜態法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 1: Static method (ISO 7346-1:1996); German version EN ISO 7346-1:1997 |
| DIN EN ISO 7346-2-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科))急性致死物質毒性的測定.第2部分:半靜態法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method (ISO 7346-2:1996); German version EN ISO 7346-2:1997 |
| DIN EN ISO 7346-3-1998 |
水質.對淡水魚(Brachydanio rerio,Hamilton-Buchanan(真骨下綱,鯉科)急性致死物質毒性的測定.第3部分:徑流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method (ISO 7346-3:1996); German version EN ISO 7346-3:1997 |
| DIN EN ISO 7371-1996 |
家用冷凍設備.有低溫隔層和無低溫隔層的冰箱.特性和試驗方法 |
Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods (ISO 7371:1995); German version EN ISO 7371:1995 |
| DIN EN ISO 7376-2004 |
麻醉和呼吸設備.氣管插管用喉鏡 |
|
| DIN EN ISO 7380-1998 |
內六角平頭螺釘 |
Heaxagon socket button head screws (ISO 7380:1997); German version EN ISO 7380:1997 |
| DIN EN ISO 7380-2004 |
內六角平圓頭螺釘 |
|
| DIN EN ISO 7384-1995 |
人造大氣環境的腐蝕試驗.一般要求 |
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986); German version EN ISO 7384:1995 |
| DIN EN ISO 7389-2004 |
房屋建筑.連接件.密封件的回彈性測定 |
|
| DIN EN ISO 7390-2004 |
房屋建筑.連接件.密封件的耐流動性測定 |
|
| DIN EN ISO 7391-1-1999 |
塑料.聚碳酸酯模塑和擠塑材料.第1部分:命名體系和基礎規范 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:1996); German version EN ISO 7391-1:1999 |
| DIN EN ISO 7391-2-1999 |
塑料.聚碳酸酯模塑和擠塑材料.第2部分:試樣制備和特性測定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999 |
| DIN EN ISO 7393-1-2000 |
水質.游離氯和氯的總含量測定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985); German version EN ISO 7393-1:2000 |
| DIN EN ISO 7393-2-2000 |
水質.游離氯和氯的總含量測定.第2部分:為常規控制目的使用N,N-二乙基-1,4-苯二胺的比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:1985); German version EN ISO 7393-2:2000 |
| DIN EN ISO 7393-3-2000 |
水質.游離氯和氯的總含量測定.第3部分:測定氯總含量的碘量滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990); German version EN ISO 7393-3:2000 |
| DIN EN ISO 7405-1998 |
牙科學.牙科醫療設備生物分解性的疾病前評定.牙科材料的試驗方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997 |
| DIN EN ISO 7438-2000 |
金屬材料.彎曲試驗 |
Metallic materials - Bend test (ISO 7438:1985); German version EN ISO 7438:2000 |
| DIN EN ISO 7438-2005 |
金屬材料.彎曲試驗 |
|
| DIN EN ISO 7439-2002 |
含銅的宮內節育避孕器具.要求、試驗 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002); German version EN ISO 7439:2002 |
| DIN EN ISO 7441-1995 |
金屬和合金的腐蝕.雙金屬在露天暴露腐蝕試驗中腐蝕的測定 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984); German version EN ISO 7441:1995 |
| DIN EN ISO 7458-2004 |
玻璃容器.耐內部壓力性.試驗方法 |
|
| DIN EN ISO 7459-2004 |
玻璃容器.耐熱沖擊性和熱沖擊耐久性.試驗方法 |
|
| DIN EN ISO 748-2000 |
明渠液流的測量.速度-面積方法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997); German version EN ISO 748:2000 |
| DIN EN ISO 7488-1995 |
牙科用混汞器 |
Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995 |
| DIN EN ISO 7490-2001 |
牙科用石膏粘接鑄造熔模 |
Dental gypsum-bonded casting investments (ISO 7490:2000); German version EN ISO 7490:2000 |
| DIN EN ISO 7491-2001 |
牙科材料.彩色穩定性的測定 |
Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000 |
| DIN EN ISO 7492-1998 |
牙科用探針 |
Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998 |
| DIN EN ISO 7493-2000 |
牙科醫生凳 |
Dental operator`s stool (ISO 7493:1997 + Technical Corrigendum 1:1999); German version EN ISO 7493:2000 |
| DIN EN ISO 7494-1-2005 |
牙科學.牙科裝置.第1部分:一般要求和試驗方法 |
|
| DIN EN ISO 7494-1997 |
牙科綜合治療設備 |
Dental units (ISO 7494:1996); German version EN ISO 7494:1997 |
| DIN EN ISO 75-1-1996 |
塑料.測定耐熱成型溫度.第1部分:一般測試方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993); German version EN ISO 75-1:1996 |
| DIN EN ISO 75-1-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第1部分:一般試驗方法 |
|
| DIN EN ISO 75-2-1996 |
塑料.測定耐熱成型溫度.第2部分:塑料和硬橡膠 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993); German version EN ISO 75-2:1996 |
| DIN EN ISO 75-2-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第2部分:塑料和硬橡膠 |
|
| DIN EN ISO 75-3-1996 |
塑料.測定耐熱成型溫度.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993); German version EN ISO 75-3:1996 |
| DIN EN ISO 75-3-2004 |
塑料.載荷下?lián)锨鷾囟鹊臏y定.第3部分:高強度熱固性疊層板和長纖維增強塑料 |
|
| DIN EN ISO 7500-1 Bb.1-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.拉伸、壓縮及彎曲試驗機的要求、驗證和校準的一般規則 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio |
| DIN EN ISO 7500-1 Bb.2-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.彈簧試驗機的要求、驗證和校準的一般規則 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach |
| DIN EN ISO 7500-1 Bb.3-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準.疲勞試驗機的要求、驗收和校準的一般規則 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac |
| DIN EN ISO 7500-1-1999 |
金屬材料.靜態單軸壓縮試驗機的驗證.第1部分:拉伸/壓縮試驗機.測力系統的驗證與校準 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO 7500-1:1999); German version EN ISO 7500-1:1999 |
| DIN EN ISO 7500-1-2004 |
金屬材料.靜態單軸向試驗機的驗證.第1部分:拉伸/壓縮試驗機.力測量系統的驗證和校正 |
|
| DIN EN ISO 7500-2-1999 |
金屬材料.靜態單軸應力試驗機的校驗.第2部分:拉伸應力的蠕變試驗機.試驗力的校驗 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines; verification of the applied load (ISO 7500-2:1996); German version EN ISO 7500-2:1999 |
| DIN EN ISO 7536-1996 |
石油產品.汽油耐氧化性測定.誘導期方法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994); German version EN ISO 7536:1996 |
| DIN EN ISO 7539-1-1995 |
金屬和合金的腐蝕.腐蝕應力試驗.第1部分:試驗程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987); German version EN ISO 7539-1:1995 |
| DIN EN ISO 7539-2-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第2部分:彎曲梁試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989); German version EN ISO 7539-2:1995 |
| DIN EN ISO 7539-3-1995 |
金屬和合金的耐腐蝕性.應力腐蝕試驗.第3部分:U型彎曲試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989); German version EN ISO 7539-3:1995) |
| DIN EN ISO 7539-4-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第4部分:單向載荷拉伸試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989); German version EN ISO 7539-4:1995) |
| DIN EN ISO 7539-5-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第5部分:C-環形試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989); German version EN ISO 7539-5:1995) |
| DIN EN ISO 7539-6-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.第6部分:預斷裂試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens (ISO 7539-6:2003); German version EN ISO 7539-6:2003) |
| DIN EN ISO 7539-7-1995 |
金屬和合金的腐蝕.應力腐蝕試驗.第7部分:慢速應變率試驗 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989); German version EN ISO 7539-7:1995) |
| DIN EN ISO 7539-7-2005 |
金屬與合金的腐蝕.應力腐蝕試驗.第7部分:慢速率應力試驗方法 |
|
| DIN EN ISO 7551-1998 |
牙科吸收點 |
(Dental absorbent points (ISO 7551:1996); German version EN ISO 7551:1998) |
| DIN EN ISO 7579-1996 |
染料.有機溶劑溶解度的測定.重量法電影攝影.在打過8mmS型影像區域.位置和尺寸 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method (ISO 7579:1990); German version EN ISO 7579:1996 |
| DIN EN ISO 7590-2001 |
鋼絲輸送帶.總厚度和覆層厚度的測量方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001); German version EN ISO 7590:2001 |
| DIN EN ISO 7622-1-1995 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第1部分:伸長的測量 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984); German version EN ISO 7622-1:1995 |
| DIN EN ISO 7622-2-1995 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第2部分:抗拉強度的測量 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984); German version EN ISO 7622-2:1995 |
| DIN EN ISO 7623-1997 |
鋼絲繩輸送機皮帶.鋼絲繩和芯層間粘合.交貨狀態檢驗和熱處理后的檢驗 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996); German version EN ISO 7623:1997 |
| DIN EN ISO 7662-1996 |
橡膠和塑料軟管.內襯磨損的測定 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 |
| DIN EN ISO 7686-2005 |
塑料管和配件.不透明度的測定 |
|
| DIN EN ISO 7711-1-1998 |
牙科用旋轉器械.金剛鉆器具.第1部分:尺寸,要求,標識和包裝 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998 |
| DIN EN ISO 7711-2-1995 |
牙科用旋轉器械.金剛鉆器具.第2部分:圓盤刀 |
Dental rotary instrument - Diamond instruments - Part 2: Discs (ISO 7711-2:1992); German version EN ISO 7711-2:1995 |
| DIN EN ISO 7711-3-1995 |
牙科用旋轉器械.金剛鉆器具.第3部分:磨粒尺寸、名稱與符號和彩色編碼 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992); German version EN ISO 7711-3:1995 |
| DIN EN ISO 7711-3-2005 |
牙醫學.金剛鉆旋轉器械.第3部分:磨粒尺寸、名稱與符號和色碼 |
|
| DIN EN ISO 7719-1998 |
1型通用扭矩六角螺母(全金屬螺母). 強度等級5,8和10 |
Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997 |
| DIN EN ISO 772-2000 |
液體比重計測定.詞匯和符號 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996); German version EN ISO 772:2000 |
| DIN EN ISO 772/A1-2004 |
水文測定.詞匯和符號 |
(Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 1:2002); German version EN ISO 772:2000/A1:2003) |
| DIN EN ISO 772/A1-2004 |
水文測定.詞匯和符號 |
|
| DIN EN ISO 7721-2-1994 |
沉頭螺釘.第2部分:十字槽 |
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994 |
| DIN EN ISO 7726-2002 |
熱環境的人類工效學.物理量測量儀器 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001 |
| DIN EN ISO 7730-1995 |
中等熱環境.對熱舒適度預測平均通過(PMV)和預測不滿意百分率(PPD)的測定及條件規范 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994); German version EN ISO 7730:1995 |
| DIN EN ISO 7731-2005 |
人類功效學.公共和工作場所險情信號.險情聽覺信號(ISO 7731-2003);德文版本 EN ISO 7731-2005 |
|
| DIN EN ISO 7751-1997 |
橡膠和塑料軟管及軟管管道.試驗壓力和爆破壓力與設計工作壓力的比值 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
| DIN EN ISO 7765-1-2004 |
塑料薄膜和薄板.自由落體法測定抗沖擊性.第1部分:梯級法 |
|
| DIN EN ISO 7779-2002 |
聲學.信息技術設備和電信設備排放的空氣噪聲的測量 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:1999); German version EN ISO 7779:2001 |
| DIN EN ISO 7783-1-1999 |
涂層材料.水蒸氣滲透率的測定.第1部分:游離膜用皮層法 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998); German version EN ISO 7782-1:1999 |
| DIN EN ISO 7783-2-1999 |
涂料和清漆.外部磚石工程和混凝土用涂覆材料和涂覆系統.第2部分:水蒸氣滲透率的測定和分類 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999); German version EN ISO 7783-2:1999 |
| DIN EN ISO 7785-1-1999 |
手持式牙科器械.第1部分:高速空氣渦輪手持器械 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
| DIN EN ISO 7785-2-1998 |
手持式牙科器械.第2部分:平角和嚙合角手持式器械 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995); German version EN ISO 7785-2:1997 |
| DIN EN ISO 7786-2001 |
牙科用旋轉器械.實驗室研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001); German version EN ISO 7786:2001 |
| DIN EN ISO 7787-2-2001 |
牙科用旋轉器械.切割刀具.第2部分:實驗室用硬質合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000); German version EN ISO 7787-2:2000 |
| DIN EN ISO 7787-4-2002 |
牙科用旋轉器械.切割刀具.第4部分:技工室用小型硬質合金刀具 |
Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002 |
| DIN EN ISO 7792-1-2004 |
塑料.熱塑性聚酯模塑和擠壓材料.第1部分:名稱與符號系統和基本規范 |
|
| DIN EN ISO 7792-2-2004 |
塑料.熱塑性聚酯模塑和擠壓材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 7799-2000 |
金屬材料.厚度3mm或小于3mm的板材或帶材.反向彎曲試驗 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000 |
| DIN EN ISO 780-1999 |
包裝.貨物搬運用圖形標志 |
Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999 |
| DIN EN ISO 7808-1998 |
塑料.熱固性模塑材料.輸送流的測定 |
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998 |
| DIN EN ISO 7822-2000 |
玻璃纖維增強塑料.空隙量測定.灼燒損失、機械粉碎和靜態計數法 |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 |
| DIN EN ISO 7823-1-2000 |
塑料.聚甲基丙烯酸甲酯板.型號、尺寸和特性.第1部分:鑄板 |
Plastic - Poly(methyl methacrylate) sheet; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1998); German version EN ISO 7823-1:2000 |
| DIN EN ISO 7823-2-1997 |
塑料.甲基丙烯酸甲酯板.型號,尺寸和特性.第2部分:熔化壓延的積壓板 |
Plastics - Poly(methyl methacrylate) sheets; types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996); German version EN ISO 7823-2:1996 |
| DIN EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯薄板.類型、尺寸和特性.第3部分:連續澆鑄板 |
|
| DIN EN ISO 7827-1996 |
水質.含水介質中有機物的充分需氧生物降解性測定.分析溶解的有機礦物質的方法 |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:1994); German version EN ISO 7827:1995 |
| DIN EN ISO 7837-2000 |
肥料.細粒肥料容積密度的測定 |
Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000 |
| DIN EN ISO 7840 Berichtigung 1-2001 |
DIN EN ISO 7840-1995的勘誤 |
Corrigendum to DIN EN ISO 7840:1995 (German version EN ISO 7840:1995/A1:2000) |
| DIN EN ISO 7840-1995 |
小艇.抗燃燒燃料軟管 |
Small craft - Fire-resistant fuel hoses (ISO 7840:1994); German version EN ISO 7840:1995 |
| DIN EN ISO 7840-2004 |
小艇.耐火燃油軟管 |
|
| DIN EN ISO 7854-1997 |
橡膠或塑料涂層織物.抗折曲損壞性的測定 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997 |
| DIN EN ISO 7864-1996 |
一次性使用無菌皮下注射針頭 |
Sterile hypodermic needles for single use (ISO 7864:1993); German version EN ISO 7864:1995 |
| DIN EN ISO 787-13-2002 |
顏料和體質染料的通用試驗方法.第13部分:水溶性硫酸鹽、氯化物和硝酸鹽的測定 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002); German version EN ISO 787-13:2002 |
| DIN EN ISO 787-14-2002 |
顏料和體質染料的通用試驗方法.第14部分:水萃取物電阻率的測定 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002); German version EN ISO 787-14:2002 |
| DIN EN ISO 787-19-1995 |
顏料和填料的一般試驗方法.第19部分:水溶性硝酸鹽的測定(水楊酸法) |
General methods of test for pigments and extenders - Part 19: Determination of water-soluble nitrates (salicylic acid method) (ISO 787-19:1974); German version EN ISO 787-19:1995 |
| DIN EN ISO 787-2-1995 |
顏料和填充劑的一般試驗方法.第2部分:在105 ℃揮發物的測定 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 C (ISO 787-2:1981); German version EN ISO 787-2:1995 |
| DIN EN ISO 787-3-2001 |
顏料和填充劑的一般試驗方法.第3部分:水溶物的測定.熱萃取法 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000); German version EN ISO 787-3:2000 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com