標準號 |
中文名稱 |
英文名稱 |
| EN ISO 10545-13-1997 |
陶瓷磚第13部分：耐化學腐蝕性的測定 |
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:1995) |
| EN ISO 10545-14-1997 |
陶瓷磚第14部分：耐污染性的測定(包括技術勘誤1) |
Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-2:1995, including Technical Corrigendum 1:1997) |
| EN ISO 10545-15-1997 |
陶瓷磚第15部分：有釉磚鉛和鎘析出量的測定 |
Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995) |
| EN ISO 10545-16-2000 |
陶瓷磚第16部分：小色差的測定 |
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:1999) |
| EN ISO 10545-2-1997 |
陶瓷磚第2部分：尺寸和表面質量的檢驗(包括技術勘誤1) |
Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997) |
| EN ISO 10545-3-1997 |
陶瓷磚第3部分：吸水率、顯氣孔率、表觀相對密度和容重的測定(包括技術勘誤1) |
Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, including Technical Corrrigendum 1:1997) |
| EN ISO 10545-4-1997 |
陶瓷磚第4部分：斷裂模數和破壞強度的測定 |
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:1995) |
| EN ISO 10545-5-1997 |
陶瓷磚第5部分：用恢復系數確定抗沖擊性(包括技術勘誤1) |
Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution (ISO 10545-5:1996, including Technical Corrigendum 1:1996) |
| EN ISO 10545-6-1997 |
陶瓷磚第6部分：無釉磚耐磨深度的測定 |
Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:1995) |
| EN ISO 10545-8-1996 |
陶瓷磚第8部分：線性熱膨脹的測定 |
Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:1994) |
| EN ISO 10545-9-1996 |
陶瓷磚第9部分：抗熱震性的測定 |
Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994) |
| EN ISO 10548-2003 |
碳纖維膠含量的測定 |
Carbon fibre - Determination of size content (ISO 10548:2002) |
| EN ISO 10551-2001 |
熱環境人類工效學通過主觀判定級別評價熱環境的影響 |
Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales (ISO 10551:1995) |
| EN ISO 10555-1-2004 |
一次性使用無菌血管內導管.第1部分:一般要求 |
|
| EN ISO 10555-2-1997 |
一次性使用無菌血管內導管第2部分：血管靜脈導管 |
Sterile, single-use intravascular catheters - Part 2: Angiographic catheters (ISO 10555-2:1996) |
| EN ISO 10555-3-1997 |
一次性使用無菌血管內導管第3部分：中央靜脈導管 |
Sterile, single-use intravascular catheters - Part 3: Central venous catheters (ISO 10555-3:1996) |
| EN ISO 10555-4-1997 |
一次性使用無菌血管內導管第4部分：球囊擴張導管 |
Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996) |
| EN ISO 10563-1997 |
房屋建筑接合用密封膠重量和體積變化的測定 |
Building construction - Sealants for joints - Determination of change in mass and volume (ISO 10563:1991) |
| EN ISO 10564-1997 |
軟釬焊材料和硬焊材料軟釬料分析取樣方法 |
Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993) |
| EN ISO 10565-1998 |
油籽油和水分含量的同步測定脈沖核磁共振光譜法 |
Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry (ISO 10565:1998) |
| EN ISO 10590-1997 |
房屋建筑密封膠浸水后保持延伸粘合性能的測定 |
Building construction - Sealants - Determination of adhesion/cohesion properties at maintained extension after immersion in water (ISO 10590:1991) |
| EN ISO 10591-1997 |
房屋建筑密封膠浸水后粘合性能的測定 |
Building construction - Sealants - Determination of adhesion/cohesion properties after immersion in water (ISO 10591:1991) |
| EN ISO 1060-1-1999 |
塑料氯乙烯的均聚物和共聚樹脂第1部分：命名體系和基本規范 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications (ISO 1060-1:1998) |
| EN ISO 1060-2-1999 |
塑料氯乙烯的均聚物和共聚樹脂第2部分：試樣的制備和性能的測定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998) |
| EN ISO 1061-1999 |
塑料未贈塑的乙酸纖維素游離酸度的測定 |
Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990) |
| EN ISO 10618-1999 |
碳纖維樹脂浸漬紗拉伸性能的測定 |
Carbon fibre - Determination of tensile properties of resin-impregnated yarns (ISO 10618:1999) |
| EN ISO 10618-2004 |
碳纖維.樹脂浸漬紗拉伸性能的測定 |
|
| EN ISO 10628-2000 |
工藝加工的流程圖總則 |
Flow diagrams for process plants - General rules (ISO 10628:1997) |
| EN ISO 10634-1995 |
水質在含水介質中生物降解能力后續評估用貧水可溶性有機化合物的制備和處理指南 |
Water quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634:1995) |
| EN ISO 10637-2000 |
牙科設備高和中容量抽吸系統 |
Dental equipment - High- and medium-volume suction systems (ISO 10637:1999) |
| EN ISO 10642-1997 |
內六角孔沉頭螺釘 |
Hexagon socket countersunk head screws (ISO 10642:1997) |
| EN ISO 10642-2004 |
內六角埋頭螺釘 |
|
| EN ISO 10644-1998 |
螺釘和平墊圈組合件 墊圈硬度等級200HV和300HV |
Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:1998) |
| EN ISO 10651-2-2004 |
醫用肺通氣機.基本安全和性能的特殊要求.第2部分:通氣機依賴型病人用家庭保健通氣機 |
|
| EN ISO 10651-4-2002 |
醫用肺通氣機第4部分：操作者控制的呼吸機的特殊要求 |
Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| EN ISO 10651-6-2004 |
醫療用肺通氣機.基本安全和性能的特殊要求.第6部分:家庭保健通氣機支持設備 |
|
| EN ISO 10664-1999 |
螺栓和螺釘用內板擰的六角花形 |
Hexalobular internal driving feature for bolts and screws (ISO 10664:1999) |
| EN ISO 10666-1999 |
自鉆自攻螺釘機械和功能性能 |
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999) |
| EN ISO 10669-1999 |
自攻螺釘和墊圈組合件用平墊圈標準和大系列產品等級A級 |
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
| EN ISO 10673-1998 |
螺釘和墊圈組合件用平墊圈孝標準和大系列產品等級A級 |
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998) |
| EN ISO 10683-2000 |
緊固件非電解鋅粉覆蓋層 |
Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2000) |
| EN ISO 10684-2004 |
緊固件.熱浸鍍鋅涂層 |
|
| EN ISO 10692-1-2001 |
氣瓶微電子工業用氣瓶閥接頭第1部分：出口接頭 |
Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001) |
| EN ISO 10692-2-2001 |
氣瓶微電子工業用氣瓶閥接頭第2部分：氣瓶閥接頭的規范和定型試驗 |
Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001) |
| EN ISO 10695-2000 |
水質部分有機氮和磷化合物的測定氣相色譜法 |
Water quality - Determination of selected organic nitrogen and phosphorus compounds - Gas chromatographic methods (ISO 10695:2000) |
| EN ISO 10700-1995 |
鋼和鐵錳含量的測定火焰原子吸收光譜法 |
Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method (ISO 10700:1994) |
| EN ISO 10705-1-2001 |
水質噬菌體的檢查和計數第1部分：F 比RNA噬菌體的計數 |
Water quality - Detection and enumeration of bacteriophages - Part 1: Enumeration of F-specific RNA bacteriophages (ISO 10705-1:1995) |
| EN ISO 10705-2-2001 |
水質噬菌體的檢查和計數第2部分：體大腸噬菌體的計數 |
Water quality - Detection and enumeration of bacteriophages - Part 2: Enumeration of somatic coliphages (ISO 10705-2:2000) |
| EN ISO 10707-1997 |
水質用生化需氧量分析法評估水介質中有機化合物的最大需氧生物降解能力(封瓶試驗) |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of biochemical oxygen demand (closed bottle test) (ISO 10707:1994) |
| EN ISO 1071-2003 |
焊接消耗品鑄鐵熔焊用藥劑焊極、焊絲、焊條和管關芯焊極分類 |
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2003) |
| EN ISO 10712-1995 |
水質假單胞桿菌類生長抑制性試驗(假單胞菌類細胞增殖抑制試驗) |
Water quality - Pseudomonas putida growth inhibition test (Pseudomonas cell multiplication inhibition test) (ISO 10712:1995) |
| EN ISO 10714-2002 |
鋼和鐵磷含量的測定磷釩鉬酸鹽分光光度法 |
Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method (ISO 10714:1992) |
| EN ISO 10715-2000 |
天然氣取樣指南 |
Natural gas - Sampling guidelines (ISO 10715:1997) |
| EN ISO 10723-2002 |
天然氣在線分析系統的性能評定 |
Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995) |
| EN ISO 10724-1-2001 |
塑料熱固性粉末模塑復合物試樣的注射模塑成型第1部分：一般原則和多用途試樣的模塑成型 |
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998) |
| EN ISO 10724-2-2000 |
塑料熱固性粉末模塑復合物試樣的注射模塑成型第2部分：小板材 |
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998) |
| EN ISO 10807-1996 |
管道工程在爆燃性空氣中電纜保護用皺紋軟金屬管組件 |
Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere (ISO 10807:1994) |
| EN ISO 10819-1996 |
機械振動與沖擊手臂振動手掌戴手套時對振動傳遞率的測量和評定方法 |
Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996) |
| EN ISO 10846-1-1998 |
聲學和振動彈性件的振動聲傳輸特性的實驗室測量第1部分：原理和指南 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:1997) |
| EN ISO 10846-2-1998 |
聲學和振動彈性件的振動聲傳輸特性的實驗室測量第2部分：傳輸運動用彈性支撐的動態勁度直接法 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Dynamic stiffness of elastic supports for translatory motion - Direct method (ISO 10846-2:1997) |
| EN ISO 10846-3-2002 |
聲學和振動彈性件的振動聲傳輸特性的實驗室測量第3部分：平移用彈性支架的動態勁度測定用間接法 |
Acoustics and vibration - Laboratory measurements of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002) |
| EN ISO 10846-4-2003 |
聲學和振動彈性件的振動聲傳輸特性的實驗室測量第4部分：除平移用彈性支架之外的件的動態勁度 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003) |
| EN ISO 10882-1-2001 |
焊接和相關工藝的衛生與安全工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣第1部分：空氣中粒子取樣 |
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001) |
| EN ISO 10882-2-2000 |
焊接和相關工藝的衛生與安全工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣第2部分：氣體取樣 |
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operatiors breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN ISO 10938-1998 |
眼科儀器圖片投影儀 |
Ophthalmic instruments - Chart projectors (ISO 10938:1998) |
| EN ISO 10940-1998 |
眼科儀器眼底照相機 |
Ophthalmic instruments - Fundus cameras (ISO 10940:1998) |
| EN ISO 10943-1998 |
眼科儀器間接檢眼鏡 |
Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:1998) |
| EN ISO 10944-1998 |
眼科儀器斜視診療器 |
Ophthalmic instruments - Synoptophores (ISO 10944:1998) |
| EN ISO 10960-1996 |
橡膠和塑料軟管動態條件下耐臭氧性的評定 |
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994) |
| EN ISO 10964-1997 |
粘合劑螺紋緊固件上厭氧粘合劑的抗扭強度的測定 |
Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993) |
| EN ISO 10993-1-2003 |
醫療器械的生物學評價第1部分：評價與試驗 |
Biological evaluation of medical devices - Part 1: Evaluation and testing (ISO 10993-1:2003) |
| EN ISO 10993-10-2002 |
醫療器械的生物學評價第10部分：刺激與致敏試驗 |
Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity (ISO 10993-10:2002) |
| EN ISO 10993-11-1995 |
醫療器械的生物學評價第11部分：全身毒性試驗 |
Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:1993) |
| EN ISO 10993-12-1996 |
醫療器械的生物學評價第12部分：樣品制備和參照物 |
Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:1996) |
| EN ISO 10993-13-1998 |
醫療器械的生物學評價第13部分：聚合物醫療器械降解產物的定性與定量 |
Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:1998) |
| EN ISO 10993-14-2001 |
醫療器械的生物學評價第14部分：陶瓷降解產物的識別與合格鑒定 |
Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
| EN ISO 10993-15-2000 |
醫療器械的生物學評價第15部分：金屬與合金降解產物的識別與定性 |
Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
| EN ISO 10993-16-1997 |
醫療器械的生物學評價第16部分：降解產物與可容出物的毒物動力學研究設計 |
Biological evaluation of medical devices - Part 16: Toxickinetic study design for degradation products and leachables (ISO 10993-16:1997) |
| EN ISO 10993-17-2002 |
醫療器械的生物學評價第17部分：可濾物質允許權限的評定 |
Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002) |
| EN ISO 10993-2-1998 |
醫療器械的生物學評價第2部分：動物保護要求 |
Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:1992) |
| EN ISO 10993-4-2002 |
醫療器械的生物學評價 第4部分:與血液相互作用的試驗選擇 |
Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002) |
| EN ISO 10993-5-1999 |
醫療器械的生物學評價第5部分：體外細胞毒性試驗 |
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:1999) |
| EN ISO 10993-7-1995 |
醫療器械的生物學評價第7部分：環氧乙烷滅菌殘留量 |
Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:1995) |
| EN ISO 10993-8-2000 |
醫療器械的生物學評價第8部分：生物學試驗參照樣品的選擇和定性 |
Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests (ISO 10993-8:2000) |
| EN ISO 10993-9-1999 |
醫療器械的生物學評價第9部分：潛在降解產物的定性與定量總則 |
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:1999) |
| EN ISO 11058-1999 |
土工布及相關產品無負載下垂直透水性的測定 |
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999) |
| EN ISO 11064-1-2000 |
控制中心的人類工效學設計第1部分：控制中心設計的原則 |
Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000) |
| EN ISO 11064-2-2000 |
控制中心的人類工效學設計第2部分：控制序列排列的原則 |
Ergonomic design of control centres - Part 2: Principles for the arrangement of control suite (ISO 11064-2:2000) |
| EN ISO 11064-3-1999 |
控制中心的人類工效學設計第3部分：控制室布置 |
Ergonomic design of control centres - Part 3: Control room layout (ISO 11064-3:1999) |
| EN ISO 11064-4-2004 |
控制中心的人類工效學設計.第4部分:工作站的布置和尺寸 |
|
| EN ISO 1107-2003 |
魚網 網 基本術語和定義 |
Fishing nets - Netting - Basic terms and definitions (ISO 1107:2003) |
| EN ISO 11070-1999 |
一次性無菌血管內導管導引器 |
Sterile single-use intravascular catheter introducers (ISO 11070:1998) |
| EN ISO 11091-1999 |
建筑工程制圖園林制圖實用規程 |
Construction drawings - Landscape drawing practice (ISO 11091:1994) |
| EN ISO 1110-1997 |
塑料聚先胺試樣的加速狀態調節 |
Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995) |
| EN ISO 11102-1-1997 |
往復式內燃機手柄起動裝置第1部分：安全要求和試驗 |
Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
| EN ISO 11102-2-1997 |
往復式內燃機手柄起動裝置第2部分：脫開角試驗方法 |
Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
| EN ISO 11105-1997 |
小艇汽油機和/或汽油柜艙室的通風 |
Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) |
| EN ISO 11111-1995 |
紡織機械的安全要求 |
Safety requirements for textile machinery (ISO 11111:1995) |
| EN ISO 11114-2-2000 |
可運輸氣瓶氣瓶和瓶閥材料與盛裝氣體的相容性第2部分：非金屬材料 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000) |
| EN ISO 11114-3-1997 |
可運輸氣瓶氣瓶和瓶閥材料與盛裝氣體的相容性第3部分：氧環境中自燃試驗 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) |
| EN ISO 11116-1-1999 |
氣瓶氣瓶與瓶閥連接用17E錐螺紋第1部分：規范 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specifications (ISO 11116-1:1999) |
| EN ISO 11116-2-1999 |
氣瓶氣瓶與瓶閥連接用17E錐螺紋第2部分：檢驗量規 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999) |
| EN ISO 11120-1999 |
氣瓶150L至3000L水容量的可重復充裝無縫綱管氣瓶設計、結構和試驗 |
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:1999) |
| EN ISO 11124-1-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的技術要求第1部分：一般介紹及分類 |
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993) |
| EN ISO 11124-2-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的技術要求第2部分：冷硬鑄鐵丸 |
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) |
| EN ISO 11124-3-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的技術要求第3部分：高碳鑄鋼丸和砂 |
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993) |
| EN ISO 11124-4-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的技術要求第4部分：低碳鑄鋼丸 |
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993) |
| EN ISO 11125-1-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第1部分：抽樣 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993) |
| EN ISO 11125-2-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993) |
| EN ISO 11125-3-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第3部分：硬度測定 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993) |
| EN ISO 11125-4-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第4部分：表觀密度測定 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993) |
| EN ISO 11125-5-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第5部分：缺陷顆粒的百分比和微結構的測定 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993) |
| EN ISO 11125-6-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第6部分：外來雜質測定 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993) |
| EN ISO 11125-7-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用金屬磨料的試驗方法第7部分：含水量測定 |
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993) |
| EN ISO 11126-1-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第1部分：總體介紹和分類(包括技術勘誤1 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2: |
| EN ISO 11126-3-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第3部分：銅精煉渣 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) |
| EN ISO 11126-4-1998 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第4部分：煤爐渣 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) |
| EN ISO 11126-5-1998 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第5部分：鎳精煉渣 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993) |
| EN ISO 11126-6-1997 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第6部分：煉鐵爐渣 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993) |
| EN ISO 11126-7-1999 |
涂裝油漆和有關產品前鋼材預處理噴射清理用非金屬磨料的技術要求第7部分：熔融氧化鋁 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com