標準號 |
中文名稱 |
英文名稱 |
| ISO 14788-1998 |
連續熱浸5%鋅鋁合金涂覆鋼薄板和卷材 |
(Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils) |
| ISO 1479-1983 |
六角頭自攻螺釘 |
(Hexagon head tapping screws) |
| ISO 14790-1997 |
擋雪板.沒有斷開機構的裝配.安全要求和試驗方法 |
(Snowboard plate-bindings without a release mechanism - Safety requirements and test methods) |
| ISO 14791-2000 |
道路車輛.重型商用車輛組合和鏈接式汽車.橫向穩定性試驗方法 |
(Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods) |
| ISO 14792-2003 |
道路車輛.重型商用車輛和公共汽車.穩態循環試驗 |
(Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests) |
| ISO 14792-2003 |
道路車輛.重型商用車輛和公共汽車.穩態循環試驗 |
|
| ISO 14793-2003 |
道路車輛.重型商用車輛和汽車.橫向瞬態響應試驗方法 |
(Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods) |
| ISO 14793-2003 |
道路車輛.重型商用車輛和汽車.橫向瞬態響應試驗方法 |
|
| ISO 14794-2003 |
重型商用車輛和客車.轉向制動.開環試驗方法 |
(Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods) |
| ISO 14794-2003 |
重型商用車輛和客車.轉向制動.開環試驗方法 |
|
| ISO 14797-1999 |
動物飼料.呋喃唑酮含量的測定.高效液體色譜法 |
(Animal feeding stuffs - Determination of furazolidone content - Method using high-performance liquid chromatography) |
| ISO 148-1983 |
鋼.擺錘沖擊試驗(V形切口) |
(Steel; Charpy impact test (V-notch)) |
| ISO 148-2-1998 |
金屬材料.卻貝擺式?jīng)_擊試驗.第2部分:試驗機的驗證 |
(Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines) |
| ISO 148-3-1998 |
金屬材料.卻貝擺式?jīng)_擊試驗.第3部分:試驗機驗證用卻貝V標準試樣的特性及制備 |
(Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines) |
| ISO 14801-2003 |
牙科學.牙科植入物的疲勞試驗 |
(Dentistry - Fatigue test for endosseous dental implants) |
| ISO 14801-2003 |
牙科學.牙科植入物的疲勞試驗 |
|
| ISO 14807-2001 |
攝影.透射和反射光密度計.性能測定法 |
(Photography - Transmission and reflection densitometers - Method for determining performance) |
| ISO 14808-1997 |
攝影.135膠片盒的組成 |
(Photography - Composition of 135-film canisters) |
| ISO 1481-1983 |
一字槽平圓頭自攻螺釘 |
(Slotted pan head tapping screws) |
| ISO 14817-2002 |
運輸信息和控制系統.ITS/TICS數據詞典和ITS/TICS中央數據記錄要求 |
(Transport information and control systems - Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries) |
| ISO 14819-1-2003 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.第1部分:無線電數據系統的編碼協議. 用ALERT-C的交通電文 |
(Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 1: Coding protocol for Radio Data System; Traffic Message Channel (RDS-TMC) using ALERT-C) |
| ISO 14819-1-2003 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.第1部分:無線電數據系統的編碼協議. 用ALERT-C的交通電文信道(RDS-TMC) |
|
| ISO 14819-2-2003 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.第2部分:無線電數據系統的事件和信息編碼. 用ALERT-C的交 |
(Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 2: Event and information codes for Radio Data System; Traffic Message Channel (RDS-TMC)) |
| ISO 14819-2-2003 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.第2部分:無線電數據系統的事件和信息編碼. 用ALERT-C的交通電文信道(RDS-TMC) |
|
| ISO 14819-3-2004 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.第3部分:ALERT-C的定位參照 |
|
| ISO 1482-1983 |
一字槽沉頭自攻螺釘(普通頭型) |
(Slotted countersunk (flat) head tapping screws (common head style)) |
| ISO 14825-2004 |
智能運輸系統.地理數據文檔(GDF).總體數據規范 |
|
| ISO 14828-2003 |
玻璃增強熱固性塑料管.潮濕條件下長期特定環形松馳硬度的測定和濕松弛因數的計算 |
(Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor) |
| ISO 14828-2003 |
玻璃纖維增強熱固性塑料管.潮濕條件下長期特定環形松馳硬度的測定和濕松弛因數的計算 |
|
| ISO 14829-2002 |
貨運集裝箱.貨運集裝箱搬運用跨運車.穩定性的計算 |
(Freight containers - Straddle carriers for freight container handling - Calculation of stability) |
| ISO 1483-1983 |
一字槽半沉頭自攻螺釘(普通頭型) |
(Slotted raised countersunk (oval) head tapping screws (common head style)) |
| ISO 14839-1-2002 |
機械振動.有主動磁性軸承的旋轉機械裝置.第1部分:詞匯 |
(Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearing - Part 1: Vocabulary) |
| ISO 14839-2-2004 |
機械振動.裝配有主動磁性軸承的旋轉機械裝置的振動.第2部分:振動評價 |
|
| ISO 14847-1999 |
旋轉變?nèi)荼?技術要求 |
(Rotary positive displacement pumps - Technical requirements) |
| ISO 14848-1998 |
塑料.不飽和的聚酯樹脂.130℃時反應性測定 |
(Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 C) |
| ISO 14849-1999 |
塑料.苯酚甲醛注模.自由氨和胺化合物的測定.靛酚法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method) |
| ISO 14850-1-2004 |
核能.廢棄物包裝件的活性測量.第1部分:帶公開幾何條件的整體模型中的高分辨率γ光譜測定法 |
|
| ISO 14851-1999 |
水生介質中塑料材料極端好氣菌生物降解性的測定.在一封閉呼吸器中測定氧需求的方法 |
(Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer) |
| ISO 14852-1999 |
水生介質中塑料材料極端好氣菌生物降解性的測定.提高二氧化碳分析的方法 |
(Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide) |
| ISO 14855 AMD 1-2004 |
在可控復合條件下塑料材料富氧菌生物降解性和非集合性的測定.二氧化碳增量分析法.修改件1: 代替成熟堆肥的活性蛭石的使用 |
|
| ISO 14855-1999 |
在控制復合條件下塑料材料極端好氣菌生物降解性和非集合性的測定.提高二氧化碳分析的方法 |
(Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide) |
| ISO 14856-2001 |
計時計.手表殼.無表帶環式手表的固定尺寸 |
(Timekeeping instruments - Wristwatch-cases - Fixing dimensions of non-spring-bar types) |
| ISO 14864-1998 |
水稻.烹飪過程中的谷粒膠凝時間的評估 |
(Rice - Evaluation of gelatinization time of kernels during cooking) |
| ISO 14865-1998 |
林業機械.背負內燃機驅動的便攜式手持灌木鏟除機和草地修剪機.安全要求和試驗 |
(Machinery for forestry - Portable hand-held brush-cutters and grass-trimmers with backpack-mounted combustion-engine power source - Safety requirements and testing) |
| ISO 14869-1-2001 |
土壤質量.測定總素含量的溶解法.第1部分:用氫氟酸和過氯酸的溶解 |
(Soil quality - Dissolution for the determination of total element content - Part 1: Dissolution with hydrofluoric and perchloric acids) |
| ISO 14869-2-2002 |
土壤質量.測定總素含量的溶解法.第2部分:用強堿熔解 |
(Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion) |
| ISO 14870-2001 |
土壤質量.用緩沖DTPA溶液提取痕量素 |
(Soil quality - Extraction of trace elements by buffered DTPA solution) |
| ISO 14877-2002 |
用粒狀磨料進行噴砂操作用防護服 |
(Protective clothing for abrasive blasting operations using granular abrasives) |
| ISO 14879-1-2000 |
外科植入物.完全的膝關節修復物.第1部分:脛骨支架耐用特性的測定 |
(Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays) |
| ISO 14880-1 Technical Corrigendum 1-2003 |
顯微物鏡系列.第1部分:詞匯.技術勘誤1 |
(Microlens array - Part 1: Vocabulary; Technical Corrigendum 1) |
| ISO 14880-1 Technical Corrigendum 1-2003 |
顯微物鏡系列.第1部分:詞匯.技術勘誤1 |
|
| ISO 14880-1 Technical Corrigendum 1-2003 |
顯微物鏡系列.第1部分:詞匯.技術勘誤1 |
|
| ISO 14880-1 Technical Corrigendum 1-2003 |
顯微物鏡系列.第1部分:詞匯.技術勘誤1 |
|
| ISO 14880-1-2001 |
微距鏡配置.第1部分:詞匯 |
(Microlens array - Part 1: Vocabulary) |
| ISO 14881-2001 |
整體光學.接口.與耦合特性有關的參數 |
(Integrated optics - Interfaces - Parameters relevant to coupling properties) |
| ISO 14887-2000 |
樣品制備.液體中粉末的分散程序 |
(Sample preparation - Dispersing procedures for powders in liquids) |
| ISO 14889-2003 |
眼科光學.眼鏡鏡片.未切精加工眼鏡片的基本要求 |
(Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses) |
| ISO 14889-2003 |
眼科光學.眼鏡鏡片.未切精加工眼鏡片的基本要求 |
|
| ISO 14890-2003 |
輸送帶.通用織物結構的橡膠或塑料包覆的輸送帶規范 |
(Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use) |
| ISO 14890-2003 |
輸送帶.通用織物結構的橡膠或塑料包覆的輸送帶規范 |
|
| ISO 14891-2002 |
牛奶和奶制品.測定氮含量.根據 Dumas原理使用常規燃燒法 |
(Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle) |
| ISO 14892-2002 |
脫脂奶粉.采用高性能液相色譜法測定維生素D的含量 |
(Dried skimmed milk - Determination of vitamin D content using high-performance liquid chromatography) |
| ISO 14895-2000 |
小型船舶.船上廚房用液體燃料爐 |
(Small craft - Liquid-fuelled galley stoves) |
| ISO 14896-2000 |
塑料.聚氨酯原材料.異氰酸酯的含量測定 |
(Plastics - Polyurethane raw materials - Determination of isocyanate content) |
| ISO 14897-2002 |
塑料.用于聚氨酯生產的多醇.水含量的測定 |
(Plastics - Polyols for use in the production of polyurethane - Determination of water content) |
| ISO 14898-1999 |
塑料.用于聚氨酯生產的芳香異氰酸酯.酸度測定 |
(Plastics - Aromatic isocyanates for use in the production of polyurethane - Determination of acidity) |
| ISO 14899-2001 |
塑料.聚氨酯生產中用的多醇.基團的測定 |
(Plastics - Polyols for use in the production of polyurethane - Determination of basicity) |
| ISO 14900-2001 |
塑料.聚氨酯生產中用的多醇.羥基數的測定 |
(Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number) |
| ISO 14902-2001 |
動物飼料.大豆制品胰蛋白酶抑制劑活性的測定 |
(Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products) |
| ISO 14906-2004 |
道路運輸和交通遠程信息管理.電子收費.專用短程通信的應用接口定義 |
|
| ISO 14906-2004 |
道路運輸和交通遠程信息管理.電子收費.專用短程通信的應用接口定義 |
|
| ISO 14910-1-1997 |
塑料.熱塑聚酯/聚醚和聚酯/聚醚鑄模和擠壓彈性體.第1部分:命名系統和規范基礎 |
(Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications) |
| ISO 14910-2-1997 |
塑料.熱塑聚酯/聚醚和聚酯/聚醚鑄模和擠壓彈性體.第2部分:試樣準備和性能測定 |
(Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties) |
| ISO 14911-1998 |
水質.用離子色譜法測定鋰離子、鈉離子、銨離子、鉀離子、錳離子、鎂離子、鍶離子和鋇離子含量.水和廢水 |
(Water quality - Determination of dissolved Li, Na, NH, K, Mn, Ca, Mg, Sr and Ba using ion chromatography - Method for water and waste water) |
| ISO 14912-2003 |
氣體分析.氣體混合成份數據的轉換 |
(Gas analysis - Conversion of gas mixture composition data ) |
| ISO 14912-2003 |
氣體分析.氣體混合成份數據的轉換 |
|
| ISO 14912-2003 |
氣體分析.氣體混合成份數據的轉換 |
|
| ISO 14912-2003 |
氣體分析.氣體混合成份數據的轉換 |
|
| ISO 14915-1-2002 |
多媒體用戶接口的軟件人類工效學.第1部分:設計原理和框架 |
(Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework) |
| ISO 14915-2-2003 |
多媒體用戶接口的軟件人類工效學.第2部分:多媒體導航和控制 |
(Software ergonomics for multimedia user interfaces - Part 2: Multimedia navigation and control) |
| ISO 14915-2-2003 |
多媒體用戶接口的軟件人類工效學.第2部分:多媒體導航和控制 |
|
| ISO 14915-3-2002 |
多媒體用戶接口的軟件人類工效學.第3部分:媒體選擇和組合 |
(Software ergonomics for multimedia user interface - Part 3: Media selection and combination) |
| ISO 14916-1999 |
熱噴涂.拉力粘附強度的測定 |
(Thermal spraying - Determination of tensile adhesive strength) |
| ISO 14917-1999 |
熱噴涂.術語,分類 |
(Thermal spraying - Terminology, classification) |
| ISO 14918-1998 |
熱噴涂.熱噴涂的驗收試驗 |
(Thermal spraying - Approval testing of thermal sprayers) |
| ISO 14919-2001 |
熱噴涂.熔噴和電弧噴涂用線材、桿材和軟線.分類.技術支持條件 |
(Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions) |
| ISO 14920-1999 |
熱噴鍍.自熔化合金的熔化和噴鍍 |
(Thermal spraying - Spraying and fusing of self-fluxing alloys) |
| ISO 14921-2001 |
熱噴涂.工程件用熱噴鍍涂層的應用程序 |
(Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components) |
| ISO 14922-1-1999 |
熱噴鍍.熱噴鍍結構的質量要求.第1部分:選擇和使用導則 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use) |
| ISO 14922-2-1999 |
熱噴鍍.熱噴鍍結構的質量要求.第2部分:綜合質量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements) |
| ISO 14922-3-1999 |
熱噴鍍.熱噴鍍結構的質量要求.第3部分:標準質量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements) |
| ISO 14922-4-1999 |
熱噴鍍.熱噴鍍結構的質量要求.第4部分:基本質量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements) |
| ISO 14923-2003 |
熱噴涂.熱噴涂層的表征和試驗 |
(Thermal spraying - Characterization and testing of thermally sprayed coatings) |
| ISO 14923-2003 |
熱噴涂.熱噴涂層的表征和試驗 |
|
| ISO 14931-2004 |
皮革.服裝(毛皮類除外)用皮革的選擇指南 |
|
| ISO 14935-1998 |
石油及其相關產品.耐火流體的吸油繩燃燒持久性測定 |
(Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids) |
| ISO 14937 Technical Corrigendum 1-2003 |
醫療保健產品.醫療器械用消毒劑的特性和消毒方法的開發、驗證和常規控制的一般要求.技術勘誤1 |
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices; Technical Corrigendum 1) |
| ISO 14937 Technical Corrigendum 1-2003 |
醫療保健產品.醫療器械用消毒劑的特性和消毒方法的開發、驗證和常規控制的一般要求.技術勘誤1 |
|
| ISO 14937-2000 |
醫療保健產品的消毒.醫療裝置用消毒劑特性和消毒過程的開發、證實和常規管理的一般要求 |
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices) |
| ISO 14939-2001 |
動物飼料.用高效液相色譜法測定卡巴氧的含量 |
(Animal feeding stuffs - Determination of carbadox content - Method using high-performance liquid chromatography) |
| ISO 14943-2004 |
核燃料技術.核臨界安全的相關管理標準 |
|
| ISO 14945-2004 |
小型船舶.制造者標牌 |
|
| ISO 14945-2004 |
小型船舶.制造者標牌 |
|
| ISO 14946-2001 |
小型船舶.最大荷載能力 |
(Small craft - Maximum load capacity) |
| ISO 14949-2001 |
外科植入物.兩節附加加工的硅彈性體 |
(Implants for surgery - Two-part addition-cure silicone elastomers) |
| ISO 14951-1-1999 |
航天系統.流體特性.第1部分:氧 |
(Space systems - Fluid characteristics - Part 1: Oxygen) |
| ISO 14951-11-1999 |
航天系統.流體特性.第11部分:氨 |
(Space systems - Fluid characteristics - Part 11: Ammonia) |
| ISO 14951-12-1999 |
航天系統.流體特性.第12部分:二氧化碳 |
(Space systems - Fluid characteristics - Part 12: Carbon dioxide) |
| ISO 14951-13-1999 |
航天系統.流體特性.第13部分:呼吸用空氣 |
(Space systems - Fluid characteristics - Part 13: Breathing air) |
| ISO 14951-2-1999 |
航天系統.流體特性.第2部分:氫推進劑 |
(Space systems - Fluid characteristics - Part 2: Hydrogen propellant) |
| ISO 14951-3 Technical Corrigendum 1-2000 |
航天系統.流體特性.第3部分:氮.技術勘誤1 |
(Space systems - Fluid characteristics - Part 3: Nitrogen; Technical Corrigendum 1) |
| ISO 14951-3-1999 |
航天系統.流體特性.第3部分:氮 |
(Space systems - Fluid characteristics - Part 3: Nitrogen) |
| ISO 14951-4 Technical Corrigendum 1-2000 |
航天系統.流體特性.第4部分:氦.技術勘誤1 |
(Space systems - Fluid characteristics - Part 4: Helium; Technical Corrigendum 1) |
| ISO 14951-4-1999 |
航天系統.流體特性.第4部分:氦 |
(Space systems - Fluid characteristics - Part 4: Helium) |
| ISO 14951-5-1999 |
航天系統.流體特性.第5部分:四氧化氮推進劑 |
Space systems - Fluid characteristics - Part 5: Nitrogen tetroxide propellant |
| ISO 14951-6-1999 |
航天系統.流體特性.第6部分:一甲基聯氨推進劑 |
Space systems - Fluid characteristics - Part 6: Monomethylhydrazine propellant |
| ISO 14951-7-1999 |
航天系統.流體特性.第7部分:聯氨推進劑 |
Space systems - Fluid characteristics - Part 7: Hydrazine propellant |
| ISO 14951-8-1999 |
航天系統.流體特性.第8部分:煤油推進劑 |
Space systems - Fluid characteristics - Part 8: Kerosene propellant |
| ISO 14951-9 Technical Corrigendum 1-2000 |
航天系統.流體特性.第9部分:氬.技術勘誤1 |
Space systems - Fluid characteristics - Part 9: Argon; Technical Corrigendum 1 |
| ISO 14951-9-1999 |
航天系統.流體特性.第9部分:氬 |
Space systems - Fluid characteristics - Part 9: Argon |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com