標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 308-1998 |
塑料.酚制模材料.丙酮可溶性物質的測定(在非制模狀態下明顯樹脂的含量) |
(Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)) |
| BS EN ISO 3098-0-1998 |
技術產品文獻.按字母分類.一般要求 |
(Technical product documentation - Lettering - General requirements) |
| BS EN ISO 3098-2-2000 |
技術產品文獻.字體.拉丁字母、數字和標記 |
(Technical product documentation - Lettering - Latin alphabet, numerals and marks) |
| BS EN ISO 3098-3-2000 |
技術產品文獻.字體.希臘字母 |
(Technical product documentation - Lettering - Greek alphabet) |
| BS EN ISO 3098-4-2000 |
技術產品文獻.字體.拉丁字母的區分標記和特殊標記 |
(Technical product documentation - Lettering - Diacritical and particular marks for the Latin alphabet) |
| BS EN ISO 3098-5-1998 |
技術產品文獻.字母.拉丁字母表,數字和標記的CAD字母排列 |
(Technical product documentation - Lettering - CAD lettering of the Latin alphabet, numerals and marks) |
| BS EN ISO 3098-6-2000 |
技術產品文獻.字體.西里爾字母 |
(Technical product documentation - Lettering - Cyrillic alphabet) |
| BS EN ISO 3104-1996 |
石油及其產品的試驗方法.石油產品.透明和不透明液體.運動粘度的測定和動力粘度的計算 |
(Methods of test for petroleum and its products - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity) |
| BS EN ISO 3107-2004 |
牙科學.氧化鋅/丁香酸和氧化鋅/非丁香酸粘固粉 |
|
| BS EN ISO 3146-2000 |
塑料.用毛細管和偏振顯微鏡法測定半晶狀聚合物的熔化性能(熔化溫度或熔化區域) |
(Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods) |
| BS EN ISO 3164-2000 |
土方機械.防護結構的實驗室評定.極限偏差容量規范 |
(Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume) |
| BS EN ISO 3166-1-1998 |
國家和區域名代碼.國家代碼 |
(Codes for the representation of names of countries and their subdivisions - Country codes) |
| BS EN ISO 3167-2003 |
塑料.多用途試樣 |
(Plastics - Multipurpose test specimens) |
| BS EN ISO 3170-1999 |
液態石油.手工取樣 |
(Petroleum liquids - Manual sampling) |
| BS EN ISO 3170-2004 |
石油及其產品的試驗方法.BS 2000-475:石油液體.人工采樣 |
|
| BS EN ISO 3171-1999 |
液態石油.自動管道取樣 |
(Petroleum liquids - Automatic pipeline sampling) |
| BS EN ISO 3175-1-1998 |
紡織品.干洗和整理.紡織品和衣服除塵度的評估方法 |
(Textiles - Dry cleaning and finishing - Method for assessing the cleanability of textiles and garments) |
| BS EN ISO 3175-2-1998 |
紡織品.干洗和整理.四氯乙烯程序 |
(Textiles - Dry cleaning and finishing - Procedures for tetrachloroethene) |
| BS EN ISO 3175-3-2003 |
紡織品.干洗和整理.用烴溶液清洗和整理時性能測試的程序 |
(Textiles - Dry cleaning and finishing - Procedure for testing performance when cleaning and finishing using hydrocarbon solvent) |
| BS EN ISO 3175-4-2003 |
紡織品.干洗和整理.用模擬濕洗法清洗和整理時性能測試的程序 |
(Textiles - Dry cleaning and finishing - Procedure for testing performance when cleaning and finishing using simulated wetcleaning) |
| BS EN ISO 3188-1994 |
淀粉及其制品.用克耶達(Kjeldahl)法測定含氮量.滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method |
| BS EN ISO 3219-1994 |
塑料.液態或起乳液或分散劑作用的聚合物/樹脂.使用規定剪切率的旋轉式粘度計測定粘度 |
(Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate) |
| BS EN ISO 3231-1993 |
涂料和清漆.對含二氧化硫的潮濕空氣的抗性的測定 |
(Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide) |
| BS EN ISO 3251-2003 |
涂料、清漆和塑料.非揮發物質含量的測定 |
(Paints, varnishes and plastics - Determination of non-volatile-matter content) |
| BS EN ISO 3252-2000 |
粉末冶金.詞匯 |
(Powder metallurgy - Vocabulary) |
| BS EN ISO 3262-1-1998 |
涂料填充劑.規范和試驗方法.介紹和一般試驗方法 |
Extenders for paints - Specifications and methods of test - Introduction and general test methods |
| BS EN ISO 3262-10-2000 |
涂料填充劑.規范和試驗方法.片狀天然滑石/亞氯酸鹽 |
(Extenders for paints - Specifications and methods of test - Natural talc/chlorite in lamellar form) |
| BS EN ISO 3262-11-2000 |
涂料填充劑.規范和試驗方法.含碳酸鹽的片狀天然滑石 |
(Extenders for paints - Specifications and methods of test - Natural talc, in lamellar form, containing carbonates) |
| BS EN ISO 3262-12-2001 |
涂料用填充劑.規范和試驗方法.白云母類云母 |
(Extenders for paints - Specifications and methods of test - Muscovite-type mica) |
| BS EN ISO 3262-13-1998 |
涂料填充劑.規范和試驗方法.天然石英(地) |
(Extenders for paints - Specifications and methods of test - Natural quartz (ground)) |
| BS EN ISO 3262-14-2000 |
涂料填充劑.規范和試驗方法.白硅石 |
(Extenders for paints - Specifications and methods of test - Cristobalite) |
| BS EN ISO 3262-15-2000 |
涂料填充劑.規范和試驗方法.透明石英 |
(Extenders for paints - Specifications and methods of test - Vitreous silica) |
| BS EN ISO 3262-16-2000 |
涂料填充劑.規范和試驗方法.氫氧化鋁 |
(Extenders for paints - Specifications and methods of test - Aluminium hydroxides) |
| BS EN ISO 3262-17-2000 |
涂料填充劑.規范和試驗方法.沉淀硅酸鈣 |
(Extenders for paints - Specifications and methods of test - Precipitated calcium silicate) |
| BS EN ISO 3262-18-2000 |
涂料填充劑.規范和試驗方法.沉淀硅鋁酸鈉 |
Extenders for paints - Specifications and methods of test - Precipitated sodium aluminium silicate |
| BS EN ISO 3262-19-2000 |
涂料填充劑.規范和試驗方法.沉淀石英 |
(Extenders for paints - Specifications and methods of test - Precipitated silica) |
| BS EN ISO 3262-2-1998 |
涂料填充劑.規范和試驗方法.重晶石(天然硫化鋇) |
(Extenders for paints - Specifications and methods of test - Barytes (natural barium sulfate)) |
| BS EN ISO 3262-20-2000 |
涂料填充劑.規范和試驗方法.煙化石英 |
(Extenders for paints - Specifications and methods of test - Fumed silica) |
| BS EN ISO 3262-21-2000 |
涂料填充劑.規范和試驗方法.石英砂(地下天然石英) |
(Extenders for paints - Specifications and methods of test - Silica sand (unground natural quartz)) |
| BS EN ISO 3262-22-2001 |
涂料用填充劑.規范和試驗方法.熱堿處理的硅藻土 |
(Extenders for paints - Specifications and methods of test - Flux-calcined kieselguhr) |
| BS EN ISO 3262-3-1998 |
涂料填充劑.規范和試驗方法.沉淀硫酸鋇 |
(Extenders for paints - Specifications and methods of test - Blanc fixe) |
| BS EN ISO 3262-4-1998 |
涂料填充劑.規范和試驗方法.白色劑 |
(Extenders for paints - Specifications and methods of test - Whiting) |
| BS EN ISO 3262-5-1998 |
涂料填充劑.規范和試驗方法.天然晶型碳酸鈣 |
(Extenders for paints - Specifications and methods of test - Natural crystalline calcium carbonate) |
| BS EN ISO 3262-6-1998 |
涂料填充劑.規范和試驗方法.沉淀碳酸鈣 |
(Extenders for paints - Specifications and methods of test - Precipitated calcium carbonate) |
| BS EN ISO 3262-7-1998 |
涂料填充劑.規范和試驗方法.白云石 |
(Extenders for paints - Specifications and methods of test - Dolomite) |
| BS EN ISO 3262-8-2000 |
涂料填充劑.規范和試驗方法.天然粘土 |
(Extenders for paints - Specifications and methods of test - Natural clay) |
| BS EN ISO 3262-9-1998 |
涂料填充劑.規范和試驗方法.煅燒粘土 |
(Extenders for paints - Specifications and methods of test - Calcined clay) |
| BS EN ISO 3269-2001 |
緊固件.驗收檢驗 |
(Fasteners - Acceptance inspection) |
| BS EN ISO 3274-1997 |
幾何產品規范(GPS).表面特征.輪廓法.接觸裝置的標定特性 |
(Geometric product specifications (GPS) - Surface texture - Profile method - Nominal characteristics of contact (stylus) instruments) |
| BS EN ISO 3325-1999 |
不包括硬質合金的燒結金屬材料.橫向斷裂強度的測定 |
(Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength) |
| BS EN ISO 3336-1995 |
牙科學.合成聚合物牙齒 |
(Dentistry - Synthetic polymer teeth) |
| BS EN ISO 3344-1997 |
增強制品.水份含量的測定 |
(Reinforcement products - Determination of moisture content) |
| BS EN ISO 3376-2003 |
皮革.物理和機械試驗.抗張強度和伸長率的測定 |
(Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension) |
| BS EN ISO 3377-1-2003 |
皮革.物理和機械試驗.扯裂荷載.單邊扯裂 |
(Leather - Physical and mechanical tests - Determination of tear load - Single edge tear) |
| BS EN ISO 3377-2-2003 |
皮革.物理和機械試驗.扯裂荷載.雙邊扯裂 |
(Leather - Physical and mechanical tests - Determination of tear load - Double edge tear) |
| BS EN ISO 3378-2003 |
皮革.物理和機械試驗.耐穿晶開裂和穿晶開裂指數的測定 |
(Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index) |
| BS EN ISO 3380-2003 |
皮革.物理和機械試驗.100℃以下的收縮溫度的測定 |
(Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 degrees C) |
| BS EN ISO 3382-2000 |
聲學.根據其它聲學參數測量廳堂混響時間 |
(Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters) |
| BS EN ISO 3385-1995 |
軟質泡沫聚合材料.用定載沖擊法測定疲勞 |
(Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding) |
| BS EN ISO 3386-1-1998 |
泡沫柔性聚合材料.壓縮應力應變特性的測定.低密度材料 |
(Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Low-density materials) |
| BS EN ISO 3386-2-1998 |
泡沫柔性聚合材料.壓縮情況下應力變形特性的測定.高密度材料 |
(Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - High-density materials) |
| BS EN ISO 340-2004 |
輸送帶.實驗室規模的易燃性特性.要求和試驗方法 |
|
| BS EN ISO 340-2004 |
輸送帶.實驗室規模的易燃性特性.要求和試驗方法 |
|
| BS EN ISO 3405-2000 |
石油及其制品的試驗方法.石油產品.大氣壓力下蒸餾特性的測定 |
(Methods of test for petroleum and its products - Petroleum products - Determination of distillation characteristics at atmospheric pressure) |
| BS EN ISO 3411-2000 |
土方機械.操作者的人體尺寸和操作者最小座艙空間 |
(Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope) |
| BS EN ISO 3450-1996 |
土方機械的安全.剎車系統規范和橡膠輪胎機械的性能要求和檢驗程序 |
(Safety of earth-moving machinery - Specification for braking systems and performance requirements and test procedures for rubber-tyred machines) |
| BS EN ISO 3451-1-1997 |
塑料.灰份的測定.第1部分:一般方法 |
(Plastics - Determination of ash - General methods) |
| BS EN ISO 3451-4-2000 |
塑料.灰份的測定.聚酰胺 |
(Plastics - Determination of ash - Polyamides) |
| BS EN ISO 3451-5-2002 |
塑料.灰分測定.聚氯乙烯 |
(Plastics - Determination of ash - Poly(vinyl chloride)) |
| BS EN ISO 3452-2-2000 |
無損檢驗.滲透檢驗.滲透材料的試驗 |
(Non-destructive testing - Penetrant testing - Testing of penetrant materials) |
| BS EN ISO 3452-3-1999 |
無損檢驗.滲透檢驗.第3部分:標準試樣 |
(Non-destructive testing - Penetrant testing - Reference test blocks) |
| BS EN ISO 3452-4-1999 |
無損檢驗.滲透檢驗.第4部分:設備 |
(Non-destructive testing - Penetrant testing - Equipment) |
| BS EN ISO 3457-2003 |
土方機械.擋板.定義和要求 |
(Earth-moving machinery - Guards - Definitions and requirements) |
| BS EN ISO 3497-2001 |
金屬鍍層.鍍層厚度的測量.X射線光譜測定法 |
(Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods) |
| BS EN ISO 3506-1-1998 |
耐腐蝕不銹鋼緊固件的機械特性.螺栓、螺釘和螺柱 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs) |
| BS EN ISO 3506-2-1998 |
耐腐蝕不銹鋼緊固件的機械特性.螺母 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts) |
| BS EN ISO 3506-3-1998 |
耐腐蝕不銹鋼緊固件的機械特性.不低于拉伸應力的定位螺絲和類似緊固件 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress) |
| BS EN ISO 3506-4-2003 |
耐腐蝕不銹鋼緊固件的機械特性.攻絲螺釘 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Tapping screws) |
| BS EN ISO 354-2003 |
聲學.混響室內聲音吸收的測量 |
(Acoustics - Measurement of sound absorption in a reverberation room) |
| BS EN ISO 3543-2001 |
金屬和非金屬涂層.厚度測量.射線反向散射法 |
(Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method) |
| BS EN ISO 3549-1996 |
涂料用鋅粉顏料.規范和試驗方法 |
(Zinc dust pigments for paints - Specifications and test methods) |
| BS EN ISO 3582-2001 |
柔性多孔聚合材料.在小火焰條件下小試樣水平方向燃燒特性的實驗室評定 |
(Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame) |
| BS EN ISO 3593-1994 |
淀粉.灰分的測定 |
(Starch - Determination of ash) |
| BS EN ISO 3596-2001 |
動植物脂肪和油.非皂化物的測定.己烷萃取法 |
(Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction) |
| BS EN ISO 3613-2001 |
鋅,鎘,鋁-鋅合金和鋅鋁合金的鉻酸鹽轉化鍍層.試驗方法 |
(Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods) |
| BS EN ISO 3630-1-1993 |
牙根管器械.銼刀、擴孔器、毛刺鉆孔器、粗銼、軟膏、探測器和棉條鉆孔器 |
(Dental root-canal instruments - Files, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches) |
| BS EN ISO 3630-2-2001 |
牙根管器械.擴孔器 |
(Dental root-canal instruments - Enlargers) |
| BS EN ISO 3630-3-1997 |
牙根管器械.冷卻器、充填器和擴張器 |
(Dental root-canal instruments - Condensers, pluggers and spreaders) |
| BS EN ISO 3650-1999 |
幾何制品規范(GPS).長度標準.塊規 |
(Geometrical product specifications (GPS) - Length standards - Gauge blocks) |
| BS EN ISO 3651-1-1998 |
不銹鋼耐晶間腐蝕的測定.第1部分:奧氏體和鐵素體奧氏體(二重)不銹鋼.測定不銹鋼在硝酸介質中質量損失的腐蝕 |
(Determination of resistance to intergranular corrosion of stainless steels - Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss) |
| BS EN ISO 3651-2-1998 |
不銹鋼耐晶間腐蝕的測定.第2部分:鐵素體、奧氏體和鐵素體奧氏體(二重)不銹鋼.含有硫酸的介質中的腐蝕試驗 |
(Determination of resistance to intergranular corrosion of stainless steels - Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid) |
| BS EN ISO 3656-2002 |
動植物脂肪和油.特制的 UV 消光表示的紫外線吸收率的測定 |
(Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction) |
| BS EN ISO 3657-2002 |
動植物油脂.皂化值的測定 |
(Animal and vegetable fats and oils - Determination of saponification value) |
| BS EN ISO 3673-2-2000 |
塑料.環氧樹脂.試樣的制備和特性的測量 |
(Plastics - Epoxy resins - Preparation of test specimens and determination of properties) |
| BS EN ISO 3675-1998 |
原油和液體石油產品.密度的實驗室測定.比重計法 |
(Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method) |
| BS EN ISO 3677-1995 |
軟錫焊,銅焊和焊連接用填充金屬.名稱與符號. |
(Filler metal for soft soldering, brazing and braze welding - Designation) |
| BS EN ISO 3678-1978 |
涂料和清漆.不粘紙試驗 |
(Paints and varnishes - Print-free test) |
| BS EN ISO 3679-2004 |
石油及其制品的試驗方法.BS 2000-523:閃點的測定.快速平衡閉杯法 |
|
| BS EN ISO 3680-2004 |
石油及其制品的試驗方法.BS 2000-524:閃點/非閃點的測定.快速平衡閉杯法 |
|
| BS EN ISO 3681-1996 |
涂料和清漆用粘合劑.皂化值測定.滴定法 |
(Binders for paints and varnishes - Determination of saponification value - Titrimetric method) |
| BS EN ISO 3682-1996 |
涂料和清漆用粘合劑.酸值測定.滴定法 |
(Binders for paints and varnishes - Determination of acid value - Titrimetric method) |
| BS EN ISO 3690-2001 |
焊接和相伴處理.鐵素體鋼弧焊金屬氧含量的測定 |
(Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal) |
| BS EN ISO 3696-1987 |
分析實驗室用水.規范和試驗方法 |
(Water for analytical laboratory use - Specification and test methods) |
| BS EN ISO 3715-1-2004 |
船舶和海上技術.船用推進裝置.推進器幾何學詞匯 |
|
| BS EN ISO 3727-1-2002 |
黃油.水、非脂固體及脂肪含量的測定.水含量的測定(參照法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Determination of moisture content (Reference method)) |
| BS EN ISO 3727-2-2002 |
黃油.水、非脂固體及脂肪含量的測定.非脂固體含量的測定(參照法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)) |
| BS EN ISO 3727-3-2003 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.脂肪含量的計算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Calculation of fat content) |
| BS EN ISO 3735-1999 |
原油和燃料油.沉積物的測定.萃取法 |
(Crude petroleum and fuel oils - Determination of sediment - Extraction method) |
| BS EN ISO 3740-2001 |
聲學.噪聲源的聲壓級的測定.基本標準使用導則 |
(Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards) |
| BS EN ISO 3741-2000 |
聲學.用聲壓測定噪聲源聲音功率級.混響室內的精密方法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms) |
| BS EN ISO 3743-1-1994 |
聲學.噪聲源聲功率級的測定.在混響聲場中小聲源和移動聲源的工程測量方法.第1部分:硬墻試驗室的比較分析法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms) |
| BS EN ISO 3743-2-1995 |
聲學.噪聲源的聲功率級測定.在混響場中對可移動聲源的工程測量方法.用專用混響試驗室的測量方法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms) |
| BS EN ISO 3744-1994 |
聲學.噪聲源音響功率級的測定 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane) |
| BS EN ISO 3746-1996 |
聲學.噪聲源音響功率級的測定.在反射平面上利用包封測量表面的測量法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane) |
| BS EN ISO 3747-2000 |
聲學.利用聲壓測定噪聲源的聲功率級.現場比較法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ) |
| BS EN ISO 3759-1995 |
紡織材料.尺寸變化測定用試驗纖維樣品和服裝的制備、做標記和測量 |
(Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change) |
| BS EN ISO 376-2002 |
金屬材料.單軸向試驗機驗證用測力儀的校正 |
(Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines) |
| BS EN ISO 376-2004 |
金屬材料.驗證單軸向試驗機用測力儀的校準 |
|
| BS EN ISO 3766-1999 |
建筑制圖.混凝土加筋的簡化表示法 |
(Construction drawings - Simplified representation of concrete reinforcement) |
| BS EN ISO 3766-2004 |
建筑制圖.混凝土鋼筋的簡化表示法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com