標準號 |
中文名稱 |
英文名稱 |
| DIN EN 365-2004 |
防人員從高處墜落的保護裝置.使用說明、維修、周期檢驗、修理、標記和包裝的一般要求 |
|
| DIN EN 3663-2004 |
航空航天系列.管連接件.丁腈橡膠制成的O形環.75IRHD.溫度范圍:-55℃到+135℃ |
|
| DIN EN 3665-1997 |
航空和航天.涂層材料的檢驗方法.耐鋁合金線性腐蝕的檢驗 |
(Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997) |
| DIN EN 367-1992 |
防護服.防熱和防火.檢驗方法.火焰作用下熱穿透的測定 |
(Protective clothing; protection against heat and flames; test method: determining of the heat transmission on exposure to flame; german version EN 367:1992) |
| DIN EN 3676-1998 |
航空和航天.薄壁,自鎖螺紋接頭.設計標準 |
(Aerospace series - Inserts, thin wall, self-locking - Design standard; German version EN 3676:1998) |
| DIN EN 368-1993 |
防護服.防液體化學材料.檢驗方法.抗液體滲透材料的抗力 |
(Protective clothing for use against liquid chemicals; test method: resistance of materials to penetration by liquids; german version EN 368:1992) |
| DIN EN 3688-2004 |
航空航天系列.焊接管用鈦合金制成的T環形填充物.14000kPa標稱壓力 |
|
| DIN EN 3689-2004 |
航空航天系列.焊接管用鈦合金制成的T環形填充物.28000kPa標稱壓力 |
|
| DIN EN 3690-2004 |
航空航天系列.鈦合金管連接件8°30.長悶頭活接頭 |
|
| DIN EN 3691-2004 |
航空航天系列.鈦合金管連接件8°30.焊接端長悶頭活接頭 |
|
| DIN EN 3696-2003 |
航空航天系列.熱阻鋼洗衣機 |
(Aerospace series - Washers in heat resisting steel; German and English version EN 3696:2001) |
| DIN EN 37-1999 |
自由沖水的座式抽水馬桶水箱.連接尺寸 |
(Pedestal W.C. pans with independent water supply - Connecting dimensions; German version EN 37:1998) |
| DIN EN 370-1993 |
木材防腐劑.家具蛀蟲根除劑的作用測定(DeGeer) |
(Wood preservatives; determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer); German version EN 370:1993) |
| DIN EN 371-1992 |
呼吸器官防護器.防低終餾點有機化合物的AX浮氣器和組合過濾器.要求.檢驗.標識 |
(Respiratory protective devices; AX gas filters and combined filters against low boiling organic compounds; requirements, testing, marking; german version EN 371:1992) |
| DIN EN 372-1992 |
呼吸器官防護器.防所謂特殊化合物的SX浮氣器和組合過濾器.要求.檢驗.標識 |
(Respiratory protective devices; SX gas filters and combined filters against specific named compounds; requirements, testing, marking; german version EN 372:1992) |
| DIN EN 3720-1995 |
航空和航天.自鎖MoS*2涂層FE-PA92HT(A286)高溫鋼制十二角螺母.等級:1100MPa(室溫)/425℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3720:1995) |
| DIN EN 3721-1995 |
航空和航天.自鎖帶圓柱形劃孔MoS*2涂層FE-PA92HT(A286)高溫鋼制十二角螺母.等級:1100MPa(室溫)/425℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3721:1995) |
| DIN EN 3722-1995 |
航空和航天.自鎖MoS*2涂層FE-PA92HT(A286)高溫鋼制裝入式鉚接螺母.等級:1100MPa(室溫)/425℃ |
(Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3722:1995) |
| DIN EN 3723-1996 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制,MoS2涂層,自鎖,六角螺母.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS coated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3723:1996) |
| DIN EN 3724-2005 |
航空航天系列.MoS2涂覆的鈦合金TI-P64001制長螺紋細桿雙六角頭螺栓.強度等級:1100 MPa(室溫) |
|
| DIN EN 3725-2005 |
航空航天系列.MoS2涂覆的陽極化處理的鈦合金TI-P64001制長螺紋標準桿六凸角凹口盤頭螺釘.強度等級:1100 MPa(室溫) |
|
| DIN EN 3726-2005 |
航空航天系列.MoS2耐熱鋼FE-PA2601 (A286)制自鎖緊夾緊螺母.強度等級:1100 MPa(室溫)/425鳦 |
|
| DIN EN 373-1993 |
防護服.抗液體金屬飛濺的評定 |
(Protective clothing; assessment of resistance of materials to molten metal splash; German version EN 373:1993) |
| DIN EN 3730-2003 |
航空航天系列.帶橡膠墊圈的鋁合金式固定和滑動支架的夾具.尺寸和質量 |
(Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001) |
| DIN EN 374-1-1994 |
防化學藥品和微生物手套.第1部分:術語和性能要求 |
(Protective gloves against chemicals and micro-organisms; part 1: terminology and performance requirements; german version EN 374-1:1994) |
| DIN EN 374-2-1994 |
防化學藥品和微生物手套.第2部分:穿透阻力的測定 |
(Protective gloves against chemicals and micro-organisms; part 2: determination of resistance to penetration; German version EN 374-2:1994) |
| DIN EN 374-3-1994 |
防化學藥品和微生物手套.第3部分:化學藥品穿透阻力的測定 |
(Protective gloves against chemicals and micro-organisms; part 3: determination of resistance to permeation by chemicals; German version EN 374-3:1994) |
| DIN EN 3740-1996 |
航空和航天.鈦合金制陽極處理MoS鍛造短螺紋小頭六角配合螺釘.等級:1100MPa(室溫下)/315℃ |
(Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3740:1996) |
| DIN EN 3741-2005 |
航空航天系列.米制夾緊螺母.安裝孔及組件 |
|
| DIN EN 3745-201-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第201部分:外觀檢查 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination; German and English version EN 3745-201:2002) |
| DIN EN 3745-205-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第205部分:電纜縱向尺寸的穩定性 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002) |
| DIN EN 3745-301-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第301部分:衰減性 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation; German and English version EN 3745-301:2002) |
| DIN EN 3745-302-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第302部分:數字孔徑 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture; German and English version EN 3745-302:2002) |
| DIN EN 3745-305-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第305部分:周圍光耦合的消除 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002) |
| DIN EN 3745-504-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第504部分:微彎曲試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002) |
| DIN EN 3745-507-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第507部分:切開 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002) |
| DIN EN 3745-508-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第508部分:扭轉 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion; German and English version EN 3745-508:2002) |
| DIN EN 3745-509-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第509部分:紐結試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test; German and English version EN 3745-509:2002) |
| DIN EN 3745-510-2003 |
航空航天系列.飛行器用光纖和電纜.試驗方法.第510部分:彎曲試驗 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test; German and English version EN 3745-510:2002) |
| DIN EN 3745-511-2002 |
航空航天系列.飛行器用光纜.試驗方法.第511部分:電纜間的磨損 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002) |
| DIN EN 3745-701-2002 |
航空航天系列.飛行器用光纜.試驗方法.第701部分:可剝離性 |
(Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002) |
| DIN EN 3746-2005 |
航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.硬度為80IRHD |
|
| DIN EN 3747-2005 |
航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.技術規范 |
|
| DIN EN 3748-2002 |
航空和航天系列.O形密封環凹槽.尺寸 |
(Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001) |
| DIN EN 375-2001 |
由生產商提供的專業用活體外診斷試劑的信息 |
(Information supplied by the manufacturer with in vitro diagnostic reagents for professional use; German version EN 375:2001) |
| DIN EN 3752-2005 |
航空航天系列.MoS2涂覆的耐熱鋼FE-PA2601 (A286)制MJ螺紋自鎖緊螺母.等級:1100 MPa(室溫)/425 鳦.技術規范 |
|
| DIN EN 3759-1996 |
航空和航天.耐蝕耐高溫鋼制鈍化螺紋接近根部帶翼型十字槽平頭螺釘.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3759:1996) |
| DIN EN 376-2002 |
生產者在實驗室中用自檢測診斷試劑提供信息 |
(Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing; German version EN 376:2002, German and English texts) |
| DIN EN 3760-1996 |
航空和航天.耐蝕耐高溫鋼制鈍化螺紋接近根部帶翼型十字槽100度沉頭螺釘.等級:1100MPa(室溫下)/425℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3760:1996) |
| DIN EN 3769-1997 |
航空和航天.耐蝕鋼和耐高溫合金的電解拋光 |
(Aerospace series - Electrolytic polishing of corrosion resistant steels and heat resisting alloys; German version EN 3769:1997) |
| DIN EN 377-1999 |
非工業流程用燃氣器具及其調節附件用潤滑劑 |
(Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes (includes Amendment A1:1996); German version EN 377:1993 + A1:1996) |
| DIN EN 3773-001-1999 |
航空和航天.單極,恒溫,額定電流為1A至25A,斷流容量65In/100Amax的保護開關.第001部分:交貨技術條件 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I/1000 A max. - Part 001: Technical specification; German version EN 3773-001:1999) |
| DIN EN 3773-003-1999 |
航空和航天.單極,恒溫,額定電流為1A至25A,斷流容量65In/100Amax的保護開關.第003部分:公制端子螺紋.產品標 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I/1000 A max. - Part 003: Metric thread terminals; product standard; German version EN 3773-003:1999) |
| DIN EN 3773-004-1999 |
航空和航天.單極,恒溫,額定電流為1A至25A,斷流容量65In/100Amax的保護開關.第004部分:UNC端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I/1000 A max. - Part 004: UNC thread terminals; product standard; German version EN 3773-004:1999) |
| DIN EN 3774-001-1999 |
航空和航天.三極,恒溫,額定電流為2A至25A,斷流容量65In的保護開關.第001部分:交貨技術條件 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I - Part 001: Technical specification; German version EN 3774-001:1999) |
| DIN EN 3774-003-1999 |
航空和航天.三極,恒溫,額定電流為2A至25A,斷流容量65In的保護開關.第003部分:公制端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I - Part 003: Metric thread terminals; product standard; German version EN 3774-003:1999) |
| DIN EN 3774-004-1999 |
航空和航天.三極,恒溫,額定電流為2A至25A,斷流容量65In的保護開關.第004部分:UNC端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I - Part 004: UNC thread terminals; product standard; German version EN 3774-004:1999) |
| DIN EN 378-1-2000 |
冷凍設備和熱泵.安全和環境要求.第1部分:基本要求、定義、分類和選擇標準 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2000) |
| DIN EN 378-2-2000 |
冷凍設備和熱泵.安全和環境要求.第2部分:設計、制造、試驗、標記和文獻工作 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation; German version EN 378-2:2000) |
| DIN EN 378-3-2000 |
冷凍設備和熱泵.安全和環境要求.第3部分:安裝地點和人員保護 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German version EN 378-3:2000) |
| DIN EN 378-4-2000 |
冷凍設備和熱泵.安全和環境要求.第4部分:操作、維修、修理和回收 |
(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery; German version EN 378-4:2000) |
| DIN EN 3788-2004 |
航空航天系列.管連接件8°30.防護管帽 |
|
| DIN EN 3789-2004 |
航空航天系列.管連接件8°30.帶外螺紋的防護管塞 |
|
| DIN EN 379-1998 |
可變換光傳導級的焊接保護濾光器和帶2個光傳導級的焊接保護濾光器的要求(包括修改A1:1998) |
(Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance (includes Amendment A1:1998); German version EN 379:1994 + A1:1998) |
| DIN EN 3790-2004 |
航空航天系列.管連接件8°30.帶內螺紋的防護管帽 |
|
| DIN EN 38-1992 |
自由沖水的壁懸式抽水馬桶水箱.連接尺寸 |
(Wall hung W.C. pan with independent water supply; connecting dimensions; german version EN 38:1992) |
| DIN EN 380-1993 |
木結構.檢驗方法.靜負荷下檢驗的一般原理 |
(Timber structures; test methods; general principles for static load testing; German version EN 380:1993) |
| DIN EN 381-1-1993 |
手持式鏈鋸操作者的防護服.第1部分:檢驗鏈鋸切割阻力的檢驗平臺 |
(Protective clothing for users of hand held chain saws; part 1: test rig for testing resistance to cutting by a chain saw; German version EN 381-1:1993) |
| DIN EN 381-10-2003 |
手提式鏈鋸使用者防護服.第10部分:上身防護裝置的試驗方法 |
(Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors; German version EN 381-10:2002) |
| DIN EN 381-11-2003 |
手持式鏈鋸使用者的防護服.第11部分:上體防護裝置的要求 |
(Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors; German version EN 381-11:2002) |
| DIN EN 381-2-1995 |
手提式鏈鋸使用者保護服.第2部分:護腿試驗方法 |
(Protective clothing for users of hand held chain saws - Part 2: Test methods for leg protectors; German version EN 381-2:1995) |
| DIN EN 381-3-1996 |
手提式鏈鋸使用者保護服.第3部分:鞋靴的檢驗方法 |
(Protective clothing for users of hand held chain saws - Part 3: Test methods for footwear; German version EN 381-3:1996) |
| DIN EN 381-4-1999 |
手提式鏈鋸使用者保護服.第4部分:使用鏈鋸的保護手套的檢驗方法 |
(Protective clothing for users of hand-held chainsaws - Part 4: Test methods for chainsaw protective gloves; German version EN 381-4:1999) |
| DIN EN 381-5-1995 |
手提式鏈鋸使用者保護服.第5部分:護腿的要求 |
(Protective clothing for users of hand held chain saws - Part 5: Requirements for leg protectors; German version EN 381-5:1995) |
| DIN EN 381-7-1999 |
手提式鏈鋸使用者保護服.第7部分:使用鏈鋸的保護手套的要求 |
(Protective clothing for users of hand-held chainsaws - Part 7: Requirements for chainsaw protective gloves; German version EN 381-7:1999) |
| DIN EN 381-8-1997 |
手提式鏈鋸使用者保護服.第8部分:使用鏈鋸時用的護腿的檢驗方法 |
(Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters; German version EN 381-8:1997) |
| DIN EN 381-9-1997 |
手提式鏈鋸使用者保護服.第9部分:使用鏈鋸時用的護腿的要求 |
(Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters; German version EN 381-9:1997) |
| DIN EN 3818-2005 |
航空航天系列.鈦合金TI-P64001制MJ螺紋螺栓.強度等級:1100 MPa(室溫).技術規范 |
|
| DIN EN 382-1-1993 |
纖維板.表面吸濕作用的測定.經干燥的纖維板的檢驗方法 |
(Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993) |
| DIN EN 382-2-1994 |
纖維板.表面吸濕作用的測定.硬板檢驗方法 |
(Fibreboards; determination of surface absorption; part 2: test method for hardboards; German version EN 382-2:1993) |
| DIN EN 383-1993 |
木結構檢驗方法.榫型緊固體嵌入強度和基礎值測定 |
(Timber structures; test methods; determination of embedding strength and foundation values for dowel type fasteners; German version EN 383:1993) |
| DIN EN 3831-2005 |
航空航天系列.MoS2涂覆的耐熱鋼FE-PM3801 (17-4PH)制自鎖緊MJ螺紋厚壁插件 |
|
| DIN EN 3832-2005 |
航空航天系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制長螺紋細桿雙六角頭螺栓.等級:1550MPa(室溫)/650℃ |
|
| DIN EN 3833-2005 |
航空航天系列.鈍化的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規范 |
|
| DIN EN 384-1996 |
支撐用建筑木材.測定特性強度值,特性剛度值以及特性粗密度值 |
(Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:1995) |
| DIN EN 384-2004 |
結構木材.機械性能特征值和密度值的測定 |
|
| DIN EN 3841-100-2005 |
航空航天系列.斷路器.試驗方法.第100部分:總則 |
|
| DIN EN 3841-201-2005 |
航空航天系列.斷路器.試驗方法.第201部分:外觀檢查 |
|
| DIN EN 3841-202-2005 |
航空航天系列.斷路器.試驗方法.第202部分:尺寸和質量 |
|
| DIN EN 3841-301-2005 |
航空航天系列.斷路器.試驗方法.第301部分:電壓降 |
|
| DIN EN 3841-302-2005 |
航空航天系列.斷路器.試驗方法.第302部分:絕緣電阻 |
|
| DIN EN 3841-303-2005 |
航空航天系列.斷路器.試驗方法.第303部分:介電強度 |
|
| DIN EN 3841-304-2005 |
航空航天系列.斷路器.試驗方法.第304部分:跳閘點 |
|
| DIN EN 3841-305-2005 |
航空航天系列.斷路器.試驗方法.第305部分:短路性能 |
|
| DIN EN 3841-306-2005 |
航空航天系列.斷路器.試驗方法.第306部分:使用壽命 |
|
| DIN EN 3842-2003 |
航空航天系列.耐腐蝕鋼液體用圓環管.尺寸.直徑3.2mm～100mm厚度0.32～2.5mm |
(Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm D 100 mm, thickness 0,32 mm a 2,5 mm; Dimensions; German and English version EN 3842:2001) |
| DIN EN 3848-2003 |
航空航天系列.半成品金屬化產品.偏差計算方法 |
(Aerospace series - Semi-finished metallic products - Methods of measuring form deviations; German and English version EN 3848:2001) |
| DIN EN 385-2002 |
指形連接的建筑木材.性能要求和最低生產要求 |
(Finger jointed structural timber - Performance requirements and minimum production requirements; German version EN 385:2001) |
| DIN EN 3851-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.直轉動螺套 |
|
| DIN EN 3852-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.有螺紋的焊接直活管節 |
|
| DIN EN 3853-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.有螺紋直活管節 |
|
| DIN EN 3854-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.焊接套圈 |
|
| DIN EN 3855-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.帽 |
|
| DIN EN 3856-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.推力線用轉動螺套 |
|
| DIN EN 3857-2004 |
航空航天系列.鈦合金TI-P64001的60?球面管子接頭.90?焊接彎頭 |
|
| DIN EN 3858-2003 |
航空航天系列.鈦合金TI-P64001、球形、60度管連接器.止推鋼絲FE-PA13 |
(Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13; German and English version EN 3858:2002) |
| DIN EN 386-2002 |
膠合板.性能要求和最低生產要求 |
(Glued laminated timber - Performance requirements and minimum production requirements; German version EN 386:2001) |
| DIN EN 387-2002 |
膠合板.大的指形接頭.性能要求和最低生產要求 |
(Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements; German version EN 387:2001) |
| DIN EN 3872-2005 |
航空航天系列.鋁合金AL-R39002-H112.模鍛件.a 200 mm |
|
| DIN EN 388-1994 |
防機械危害的手套 |
(Protective gloves against mechanical risks; German version EN 388:1994) |
| DIN EN 3882-2002 |
航空航天系列.耐高溫合金NI-WH1801(NiCr20Co18Ti3Al2).焊接添加料 |
(Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding; German version EN 3882:2001) |
| DIN EN 3883-2002 |
航空航天系列.耐高溫合金NI-WH2301(NiCr22Fe19Mo9Co2).焊接添加料 |
(Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding; German version EN 3883:2001) |
| DIN EN 3884-2002 |
航空航天系列.耐高溫合金NI-WH2601(NiCr19Nb5Mo3Ti).焊接添加料 |
(Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding; German version EN 3884:2001) |
| DIN EN 3885-2002 |
航空航天系列.耐高溫合金NI-WH3601(NiCr22Mo9Nb4).焊接添加料 |
(Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding; German version EN 3885:2001) |
| DIN EN 3886-2002 |
航空航天系列.耐高溫合金NI-WH1303(NiCo20Cr20Mo5Ti2Al).焊接添加料 |
(Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding; German version EN 3886:2001) |
| DIN EN 3887-2002 |
航空航天系列.耐高溫合金CO-WH4101(CoCr20W15Ni).焊接添加料 |
(Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding; German version EN 3887:2001) |
| DIN EN 3888-2002 |
航空航天系列.耐高溫合金CO-WH1402(CoCr22Ni22W15).焊接添加料 |
(Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding; German version EN 3888:2001) |
| DIN EN 3889-2003 |
航空航天系列.鋼FE-WM3801(X5CrNiCu17-4).焊接用填充金屬 |
(Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding; German and English version EN 3889:2001) |
| DIN EN 3890-2003 |
航空航天系列.鋼FE-WM1502(X11CrNiMoVN12-3).焊接用填充金屬 |
(Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding; German and English version EN 3890:2001) |
| DIN EN 3892-2002 |
航空航天系列.鈦合金TI-W64001.焊接添加料 |
(Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding; German version EN 3892:2001) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com