標準號 |
中文名稱 |
英文名稱 |
| BS EN 61010-2-045-2001 |
測量、控制和實驗室用電氣設備的安全要求.醫療、藥用、獸醫和實驗室用洗滌機消毒器的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fi) |
| BS EN 61010-2-051-2003 |
測量、控制和實驗室用電氣設備的安全要求.混合和攪拌用實驗室設備的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for mixing and stirring) |
| BS EN 61010-2-061-2003 |
測量、控制和實驗室用電氣設備的安全要求.具有熱原子化和離子化的實驗室原子光譜測定儀的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization) |
| BS EN 61010-2-081-2002 |
測量、控制和實驗室用電氣設備的安全要求.分析和其他目的用的自動和半自動實驗室設備的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes) |
| BS EN 61010-2-101-2002 |
測量、控制和實驗室用電氣設備的安全要求.實驗室診斷(IVD)醫療設備的特殊要求 |
(Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment) |
| BS EN 61012-1991 |
伴有超聲情況下可聽聲測量用濾波器 |
(Filters for the measurement of audible sound in the presence of ultrasound) |
| BS EN 61014-2003 |
可靠性增長用程序 |
(Programmes for reliability growth) |
| BS EN 61016-2001 |
使用19mm磁帶(格式D-1)的螺旋掃描數字式件盒式錄像帶記錄系統 |
(Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)) |
| BS EN 61019-2-1997 |
表面聲波諧振器的使用導則 |
(Surface acoustic wave (SAW) resonators - Guide to the use) |
| BS EN 61019-2-2005 |
表面聲波諧振器.使用導則 |
|
| BS EN 61021-1-1990 |
電信和電氣設備用的變壓器和電感器的疊片鐵心包.第1部分:尺寸規范 |
(Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Specification for dimensions) |
| BS EN 61021-2-1997 |
電信和電氣設備用的變壓器和電感器的疊片鐵心包.第2部分:用YEE 2疊片鐵芯的電器性能 |
(Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Electrical characteristics for cores using YEE 2 laminations) |
| BS EN 61023-2000 |
海上導航和無線電通信設備和系統.航海速度和距離的測量設備(SDME).性能要求.試驗方法和要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results) |
| BS EN 61027-1993 |
可聽音阻抗/導納測量用儀表規范 |
(Specification for instruments for the measurement of aural acoustic impedance/admittance) |
| BS EN 61028-1991 |
電氣測量?jī)x表規范.X-Y記錄器 |
Specification for electrical measuring instruments - X-Y recorders |
| BS EN 61029-1-2000 |
可移動馬達控制的電動機床的安全.一般要求 |
(Safety of transportable motor-operated tools - General requirements) |
| BS EN 61029-2-1-2002 |
可移動馬達操手工工具的安全性.圓盤鋸工作臺的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for circular saw benches) |
| BS EN 61029-2-11-2003 |
移動式電動工具的安全.組合橫切鋸和臺鋸的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws) |
| BS EN 61029-2-4-2003 |
移動式電動機床的安全.臺式磨床的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for bench grinders) |
| BS EN 61029-2-5-2002 |
可移動馬達操手工工具安全性.帶狀鋸的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for band saws) |
| BS EN 61029-2-8-2003 |
移動式電動工具的安全.單芯軸垂直模壓機的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders) |
| BS EN 61029-2-9-2003 |
移動式電動機床的安全.斜切鋸的特殊要求 |
(Safety of transportable motor-operated tools - Particular requirements for mitre saws) |
| BS EN 61030-1991 |
音頻、視頻和視聽系統用家用數字總線(DZB)規范 |
(Specification for domestic digital bus (D2B) for audio, video and audiovisual systems) |
| BS EN 61032-1998 |
用外殼對人體和設備進行保護.驗證用探針 |
(Protection of persons and equipment by enclosures - Probes for verification) |
| BS EN 61037-1990 |
電表.電費和負載控制.電子脈動控制接收器的特殊要求 |
(Electricity metering - Tarriff and load control - Particular requirements for electronic ripple control receivers) |
| BS EN 61038-1991 |
費率和負載控制用計時開關規范 |
(Specification for time switches for tariff and load control) |
| BS EN 61040-1993 |
激光輻射功率和能量探測器、儀表和設備規范 |
(Specification for power and energy measuring detectors, instruments and equipment for laser radiation) |
| BS EN 61041-1-1991 |
非播放用磁帶錄像機.測量方法.一般視頻(NTSC/PAL)和聲頻(縱向)特性 |
(Non-broadcast video tape recorders - Methods of measurement - General video (NTSC/PAL) and audio (longitudinal) characteristics) |
| BS EN 61041-2-1996 |
非播放用磁帶錄像機.測量方法.視頻特性色度SECAM |
(Non-broadcast video tape recorders - Methods of measurement - Video characteristics chrominance SECAM) |
| BS EN 61041-3-1994 |
非播放用磁帶錄像機.測量方法.FM制式錄音用聲頻特性 |
(Non-broadcast video tape recorders - Methods of measurement - Audio characteristics for FM recording) |
| BS EN 61041-4-1998 |
非播放用磁帶錄像機.測量方法.校正磁帶(NTSC/PAL/SECAM) |
(Non-broadcast video tape recorders - Methods of measurement - Calibration tape (NTSC/PAL/SECAM)) |
| BS EN 61041-5-1998 |
非播放用磁帶錄像機.測量方法.包括裝配有Y/C視頻連接器(NTSC/PAL)的高頻帶磁帶錄像機 |
(Non-broadcast video tape recorders - Methods of measurement - High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)) |
| BS EN 61043-1994 |
電聲學規范.聲強測量?jī)x.雙壓傳感傳聲器測試 |
(Specification for electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones) |
| BS EN 61044-1993 |
鋁酸牽引蓄電池的臨時性充電 |
(Opportunity-charging of lead-acid traction batteries) |
| BS EN 61047-1993 |
白熾燈直流和交流供電電子降壓變流器規范.性能要求 |
Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps - Performance requirements |
| BS EN 61047-2004 |
鎢絲燈用交直流供電電子降壓轉換器.性能要求 |
|
| BS EN 61047-2004 |
鎢絲燈用交直流供電電子降壓轉換器.性能要求 |
|
| BS EN 61048-1993 |
管形熒光燈和其它放電電燈電路用電容器的一般要求和安全要求規范 |
(Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements) |
| BS EN 61049-1993 |
管形熒光燈和其它放電燈電路用電容器的性能要求規范 |
Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements |
| BS EN 61050-1992 |
空載輸出電壓超過1000V的管形放電用變壓器規范(一般叫做氖管變壓器).一般要求和安全要求規范 |
Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements |
| BS EN 61056-1-2003 |
便攜式鉛酸電池和蓄電池(閥調節型).一般要求、功能特性.試驗方法 |
Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test |
| BS EN 61056-2-2003 |
便攜式鉛酸電池和蓄電池(閥調節型).尺寸、端子和標記 |
Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking |
| BS EN 61057-1994 |
超過1kV a.c.帶電作業用帶絕緣桿的高空作業器械 |
Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
| BS EN 61058-1-2002 |
電器開關.一般要求 |
Switches for appliances - General requirements |
| BS EN 61058-2-1-1993 |
設備開關.特殊要求.拉線開關 |
(Switches for appliances - Particular requirements - Cord switches) |
| BS EN 61058-2-5-1995 |
器件開關.特殊要求.轉換開關選擇器 |
(Switches for appliances - Particular requirements - Change-over selectors) |
| BS EN 61061-1-1998 |
電氣用非浸漬硬化層壓板.定義、名稱與符合和一般要求 |
Non-impregnated densified laminated wood for electrical purposes - Definitions, designations and general requirements |
| BS EN 61061-2-2002 |
電工用非浸漬致密層壓板.試驗方法 |
(Non-impregnated densified laminated wood for electrical purposes - Methods of test) |
| BS EN 61061-3-1-1998 |
電氣用途的非浸漬致密層壓板.單獨材料規范.由山毛櫸膠合板制成的片材制品 |
(Non-impregnated densified laminated wood for electrical purposes - Specification for individual materials - Sheets produced from beech veneer) |
| BS EN 61061-3-2-2002 |
電工用非浸漬致密層合木板.單項材料規范.毛櫸薄板制成的環材 |
(Non-impregnated densified laminated wood for electrical purposes - Specification for individual materials - Rings produced from beech veneer) |
| BS EN 61063-1996 |
聲學.由蒸汽輪機和被驅動的機器發出的空載噪音的測量 |
(Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery) |
| BS EN 61064-1993 |
汽輪機速度控制系統驗收試驗指南 |
(Guide to acceptance tests for steam turbine speed control systems) |
| BS EN 61065-1993 |
老化后礦物絕緣油低溫流動特性的評估方法 |
(Method for evaluating the low temperature flow properties of mineral insulating oils after ageing) |
| BS EN 61067-1-1997 |
玻璃和玻璃聚酯纖維機織帶.第1部分:定義、分類和一般要求 |
(Glass and glass polyester fibre woven tapes - Definitions, classification and general requirements) |
| BS EN 61067-2-1997 |
玻璃和玻璃聚酯纖維機織帶.第2部分:試驗方法 |
(Glass and glass polyester fibre woven tapes - Methods of test) |
| BS EN 61067-3-1-1995 |
玻璃和玻璃聚酯纖維機織帶.第3部分:單項材料規范.第1活頁:1,2,3型織帶 |
(Glass and glass polyester fibre woven tapes - Specifications for individual materials - Type 1, 2 and 3 tapes) |
| BS EN 61068-1-1997 |
聚酯纖維機織帶.第1部分:定義、名稱牌號和一般要求 |
(Polyester fibre woven tapes - Definitions, designation and general requirements) |
| BS EN 61068-2-1997 |
聚酯纖維機織帶.第2部分:試驗方法 |
(Polyester fibre woven tapes - Methods of test) |
| BS EN 61068-3-1-1996 |
聚酯纖維機織帶.第3部分:單項材料規范.第1活頁:常規的或無梭織機編織帶 |
(Polyester fibre woven tapes - Specification for individual materials - Tapes woven on conventional or shuttleless looms) |
| BS EN 61069-1-1993 |
工業過程測量和控制.用于系統評定的系統特性的評估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - General considerations and methodology) |
| BS EN 61069-2-1994 |
工業處理測量和控制.系統評定用系統特性估定.第2部分:評定方法 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment methodology) |
| BS EN 61069-3-1997 |
工業流程測量和控制.系統評定用系統性能的評價.系統功能度的評價 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system functionality) |
| BS EN 61069-4-1998 |
工業過程測量和控制.用于系統評定的系統特性的評估.系統性能評估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system performance) |
| BS EN 61069-5-1995 |
工業處理測量和控制.系統評定用系統特性估定.第5部分:系統可靠性評定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system dependability) |
| BS EN 61069-6-1998 |
工業過程測量和控制.用于系統評定的系統特性的評估.系統操作性能的評估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system operability) |
| BS EN 61069-7-1999 |
工業過程測量和控制.系統評定用系統性能的評價.系統安全的評定 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of system safety) |
| BS EN 61069-8-1999 |
工業過程測量和控制.系統評定用系統性能的評價.非任務相關系統的性能評估 |
(Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Assessment of non-task related system properties) |
| BS EN 61071-1-1997 |
補償電容器.第1部分:總則 |
(Power electronic capacitors - General) |
| BS EN 61071-2-1996 |
補償電容器.第2部分:熔斷器上的切斷試驗.破壞試驗.自行恢復試驗和疲勞試驗的要求 |
(Power electronic capacitors - Requirements for disconnecting test on fuses, destruction test, self healing test and endurance test) |
| BS EN 61073-1-2000 |
光纖和光纜的機械接頭和熔融接頭防護器.總規范 |
(Mechanical splices and fusion splice protectors for optical fibres and cables - Generic specification) |
| BS EN 61074-1993 |
用差示掃描量熱法測定電子絕緣材料熔化和結晶時所產生的熱量和溫度的試驗方法 |
(Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry) |
| BS EN 61075-1991 |
船舶用C型導航接收儀.最低性能標準.試驗方法和所需試驗結果 |
(Loran-C receivers for ships - Minimum performance standards - Methods of testing and required test results) |
| BS EN 61076-1-1996 |
直流低頻率模擬及高速數據數字系統用的已進行過質量評定的連接器.總規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Generic specification) |
| BS EN 61076-2-001-2002 |
直流低頻模擬和數字高速數據設備用經質量評定的連接器.圓形連接器.空白詳細規范 |
(Connectors for electronic equipment - Circular connectors - Blank detail specification) |
| BS EN 61076-2-101-2004 |
電子設備用連接器.圓形連接器.低壓螺釘鎖緊或快速鎖緊的M8圓形連接器和螺釘鎖緊的M12圓形連接器的詳細規范 |
|
| BS EN 61076-2-101-2004 |
電子設備用連接器.圓形連接器.低壓螺釘鎖緊或快速鎖緊的M8圓形連接器和螺釘鎖緊的M12圓形連接器的詳細規范 |
|
| BS EN 61076-2-101-2004 |
電子設備用連接器.圓形連接器.低壓設備用螺口或卡口的M8圓形連接器和螺口的M12圓形連接器的詳細規范 |
|
| BS EN 61076-2-102-2002 |
電子設備連接器.圓形連接器.質量評定的圓形連接器.室外低壓供電站用的插頭和插座的詳細規范 |
(Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply) |
| BS EN 61076-2-103-2004 |
電子設備連接器.圓形連接器.一系列多點連接器的詳細規范(XLR型) |
|
| BS EN 61076-2-103-2004 |
電子設備用連接器.圓形連接器.一系列多點連接器的詳細規范(XLR型) |
|
| BS EN 61076-2-103-2004 |
電子設備用連接器.圓形連接器.一系列多點連接器的詳細規范(XLR型) |
|
| BS EN 61076-2-103-2004 |
電子設備用連接器.圓形連接器.一系列多點連接器的詳細規范(XLR型) |
|
| BS EN 61076-2-1999 |
直流低頻模擬及高速數據數字系統用經質量評定的連接器.經質量評定的圓形連接器.分規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Circular connectors with assessed quality - Sectional specification) |
| BS EN 61076-3-001-2000 |
直流低頻模擬及高速數據數字系統用經質量評定的連接器.矩形連接器.空白詳細規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Blank detail specification) |
| BS EN 61076-3-100-2004 |
直流低頻模擬及數字高速數據應用系統用經質量評定的連接器.矩形連接器.帶有1.27mm雙排不可拆卸矩形接觸件及梯形外殼的屏蔽系列連接器的詳細規范 |
|
| BS EN 61076-3-100-2004 |
直流低頻模擬及數字高速數據應用系統用連接器.有質量評定的矩形連接器.帶有1.27mm雙排不可拆卸矩形接觸件及梯形外殼的屏蔽系列連接器詳細規范 |
|
| BS EN 61076-3-101-1998 |
直流低頻模擬及高速數據數字系統用已質量評定的連接器. 矩形連接器.帶梯形殼的屏蔽連接器的有效范圍和在1.2 |
() |
| BS EN 61076-3-103-2004 |
有質量評定的直流低頻模擬及數字高速數據應用系統用連接器.矩形連接器.高速串行數據(HSSDC)用帶1.25mm間距不可拆卸帶狀電纜接觸件的單排連接器的詳細規范 |
|
| BS EN 61076-3-103-2004 |
有質量評定的直流低頻模擬及數字高速數據應用系統用連接器.矩形連接器.高速串行數據(HSSDC)用帶1.25mm間距不可拆卸帶狀電纜接觸件的單排連接器的詳細規范 |
|
| BS EN 61076-3-104-2003 |
直流低頻率模擬及數字高速數據系統用的已進行過質量評定的連接器.矩形連接器.最低頻率為不大于600MHz的數據 |
() |
| BS EN 61076-3-2000 |
直流低頻模擬及高速數據數字系統用經質量評定的連接器.經質量評定的矩形連接器.分規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors with assessed quality - Sectional specification) |
| BS EN 61076-4-001-1997 |
直流低頻模擬設備和高速數字?jǐn)?shù)據應用設備用已質量評定的連接器.印制電路板連接器.空白詳細規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification) |
| BS EN 61076-4-100-2002 |
用于直流低頻模擬,使用數字高速數據的連接器(帶有質量評定).印制板連接器.具有2.5mm網格,印制板和背板用兩 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connector modules h) |
| BS EN 61076-4-101-2001 |
直流低頻模擬和數字高速數據用經質量評定的連接器.印刷電路板用連接器.符合IEC 60917的印刷電路板及底板用 |
() |
| BS EN 61076-4-102-1997 |
直流低頻率模擬及高速數據數字系統用已進行過質量評定的連接器.第4部分:印制電路板聯接器.第102節:帶前定心 |
() |
| BS EN 61076-4-103-1999 |
直流低頻模擬及高速數據數字系統用連接器.經質量評定的印制電路板連接器.帶外殼和2.5mm基柵的雙面連接器 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shi) |
| BS EN 61076-4-104-1999 |
直流低頻模擬和數字高速數據設備用經質量評定的連接器.印制板連接器.終端在0.5MM多重柵極的基本柵極為2.0MM |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid) |
| BS EN 61076-4-105-1998 |
直流低頻模擬及高速數據數字系統用經質量評定的連接器.印制電路板用連接器.各種用途包括電信和聲訊工程用的 |
() |
| BS EN 61076-4-107-2001 |
經質量評定的用于直流、低頻模擬和高速數據應用的連接器.具有基本網格為0.2mm印制板用焊接和壓緊接端固定件 |
() |
| BS EN 61076-4-108-2003 |
電子設備連接器.經質量評定的印制板連接器.符合IEC 60917-1的基本網格為2.5mm、有25mm模數間距和集成屏蔽功 |
() |
| BS EN 61076-4-110-2002 |
直流低頻模擬和數字高速數據設備用經質量評定的連接器.印制板連接器.基本柵級為2.0mm并具有完全屏蔽和鎖定 |
() |
| BS EN 61076-4-111-2002 |
電子設備連接器.質量評定的印制板.印制板及底板用網格為2.5 mm的、與IEC 60917-1協調一致的兩件式連接器組 |
() |
| BS EN 61076-4-113-2003 |
電子設備連接器.經質量評定的印制電路板連接器.印制電路板和總線底板用網格為2.5mm的5列兩件式連接器的詳細 |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplan) |
| BS EN 61076-4-114-2003 |
電子設備用連接器.經質量評定的印制板連接器.格柵為1mmx1.5mm的有整體屏蔽功能的兩件式連接器詳細規范 |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm) |
| BS EN 61076-4-115-2003 |
電子設備用連接器.經質量評定的印制板連接器.無限頻帶設備用印制板背面連接器 |
(Connectors for electronic equipment - Printed board connectors with assessed quality - Backplane connector for InfiniBand equipment) |
| BS EN 61076-4-1997 |
直流低頻模擬及高速數據數字系統用經質量評定的連接器.分規范.印制電路板用連接器 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Sectional specification - Printed board connectors) |
| BS EN 61076-5-2001 |
直流低頻率模擬及高速數據數字設備用的連接器.已進行過質量評定的串聯插座.分規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification) |
| BS EN 61076-6-2004 |
電子設備用連接器.可拆部分觸點.分規范 |
|
| BS EN 61076-7-001-2004 |
電子設備連接器.電纜引出端附件.空白詳細規范 |
|
| BS EN 61076-7-001-2004 |
電子設備用連接器.電纜引出端附件 |
|
| BS EN 61076-7-001-2004 |
電子設備連接器.電纜引出端附件.空白詳細規范 |
|
| BS EN 61076-7-2001 |
直流低頻率模擬及高速數據數字系統用的已進行過質量評定的連接器.分規范 |
(Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Cable outlet accessories with assessed quality, including qualification and capa) |
| BS EN 61077-1992 |
采用12.65mm(0.5in)VHS型磁帶的螺旋掃描盒式帶錄像系統.小型VHS盒式錄像帶 |
(Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Compact VHS video cassette) |
| BS EN 61078-1992 |
系統、設備和部件的可靠性.方框圖法使用指南 |
(Reliability of systems, equipment and components - Guide to the block diagram technique) |
| BS EN 61079-1-1995 |
12GHz頻帶衛星廣播接收機的測量方法.第1部分:露天設備的射頻測量 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Radio-frequency measurements on outdoor units) |
| BS EN 61079-2-1995 |
12GHz頻帶衛星廣播接收機的測量方法.DBS調諧設備的電氣測量 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Electrical measurements on DBS tuner units) |
| BS EN 61079-3-1995 |
12GHz頻帶衛星廣播接收機的測量方法.第3部分:接收天線系統包括戶外裝置和DBS調諧裝置總性能的電測量 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS t) |
| BS EN 61079-5-1995 |
12GHz頻帶衛星廣播接收機的測量方法.MAC/包系統的譯碼器單的測量方法 |
(Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Electrical measurements on decoder units for MAC/packet systems) |
| BS EN 61082-1-1993 |
電工技術使用的文件的制訂.一般要求 |
(Preparation of documents used in electrotechnology - General requirements) |
| BS EN 61082-2-1994 |
技術電工使用的編制文件.第2部分:功能圖 |
(Preparation of documents used in electrotechnology - Function-oriented diagrams) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com