標準號 |
中文名稱 |
英文名稱 |
| EN ISO 4541-1994 |
金屬和其他無機覆蓋層腐蝕膏腐蝕試驗(CORR試驗) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978) |
| EN ISO 4543-1994 |
金屬和其他無機覆蓋層儲存條件下腐蝕試驗的一般規則 |
Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions (ISO 4543:1981) |
| EN ISO 4577-1999 |
塑料聚丙烯和聚丙烯共聚物空氣中氧化穩定性的測定烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:1983) |
| EN ISO 4583-1998 |
塑料環氧樹脂和有關材料易皂化氯的測定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998) |
| EN ISO 4589-1-1999 |
塑料通過氧指數測定其燃燒性第1部分：指南 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996) |
| EN ISO 4589-2-1999 |
塑料通過氧指數測定其燃燒性第2部分：室溫試驗 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996) |
| EN ISO 4589-3-1996 |
塑料通過氧指數測定其燃燒性第3部分：高溫試驗 |
Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996) |
| EN ISO 4590-2003 |
硬質泡沫塑料材料開孔及閉孔體積百分?jǐn)?shù)的測定 |
Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002) |
| EN ISO 4597-1-1997 |
塑料環氧樹脂用固化劑和促進劑第1部分：命名 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983) |
| EN ISO 4599-1996 |
塑料耐環境應力龜裂的測定變形片法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986) |
| EN ISO 4600-1997 |
塑料耐環境應力龜裂的測定球或針壓痕法 |
Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method (ISO 4600:1992) |
| EN ISO 4608-1998 |
塑料氯乙烯一般用途氯乙烯均聚物和共聚物樹脂室溫下增塑劑吸收的測定 |
Plastics - Vinylchlorid(VC)-homopolymere and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998) |
| EN ISO 4610-2001 |
塑料氯乙烯均聚物和共聚物樹脂用空氣噴射篩濾器進行篩析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001) |
| EN ISO 4611-1999 |
塑料濕熱水濺和鹽霧效應的測定 |
Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987) |
| EN ISO 4612-1999 |
塑料試驗用聚氯乙烯糊料的制備齒輪傳動混合方法 |
Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999) |
| EN ISO 4613-1-1999 |
塑料乙酸乙烯／乙烯酯模塑和擠塑材料第1部分：命名和規范 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993) |
| EN ISO 4613-2-1995 |
塑料乙酸乙烯／乙烯酯模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995) |
| EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和擠塑材料.第2部分:試驗樣品的制備和性能測定 |
|
| EN ISO 4613-2/prA1-2001 |
塑料乙酸乙烯／乙烯酯模塑和擠塑材料第2部分：試樣的制備和性能的測定修改1 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment A1 (ISO 4613-2:1995/DAM 1:2001) |
| EN ISO 4614-1999 |
塑料三聚氰胺－甲醛模塑件可萃取的甲醛的測定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977) |
| EN ISO 4615-1999 |
塑料不飽和聚酯和環氧樹脂總氯量的測定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979) |
| EN ISO 4617-2000 |
色漆和清漆系列等效術語表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000) |
| EN ISO 4618-2-1999 |
色漆和清漆涂覆材料的術語和定義第2部分：與涂料特性有關的特殊術語 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999) |
| EN ISO 4618-3-1999 |
色漆和清漆涂覆材料的術語和定義第3部分：表面制備和應用方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999) |
| EN ISO 4622-1994 |
色漆和清漆堆積壓力試驗 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992) |
| EN ISO 4623-1-2002 |
色漆和清漆耐絲狀腐蝕的測定第1部分：鋼基質 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
| EN ISO 4623-2-2004 |
涂料和清漆.耐絲狀腐蝕性的測定.第2部分:鋁襯底 |
|
| EN ISO 4624-2003 |
色漆和清漆 粘附性的 撕開試驗 |
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002) |
| EN ISO 4628-1-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第1部分：一般介紹和命名系統 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003) |
| EN ISO 4628-10-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第10部分：線狀腐蝕度的評定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree filiform corrosion (ISO 4628-10:2003) |
| EN ISO 4628-2-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第2部分：起泡度的評定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003) |
| EN ISO 4628-3-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第3部分：防生銹度的評定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003) |
| EN ISO 4628-4-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第4部分：破裂度的評定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003) |
| EN ISO 4628-5-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第5部分：剝落度的評定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003) |
| EN ISO 4628-6-2001 |
色漆和清漆漆膜降解的評定一般性缺陷程度、量值和大小的規定第6部分：粉化等級評定用膠帶方法 |
Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990) |
| EN ISO 4628-7-2003 |
色漆和清漆 涂層降解性的評定 表面缺陷數量和大小，和均勻變化強度的測定 第7部分：用絨化法做粉化程 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003) |
| EN ISO 4629-1998 |
色漆和清漆用粘合劑羥值的測定滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
| EN ISO 4638-1995 |
軟質泡沫聚合材料氣流透過率的測定 |
Polymeric materials, cellular flexible - Determination of air flow permeability (ISO 4638:1984) |
| EN ISO 4651-1995 |
泡沫橡膠和塑料動態緩沖性能測定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988) |
| EN ISO 4671-2000 |
橡膠和塑料軟管和軟管組件尺寸測量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999) |
| EN ISO 4672-1999 |
橡膠和塑料軟管低溫的彎曲試驗 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) |
| EN ISO 4674-1-2003 |
涂橡膠-或塑料的織物 抗撕裂力的測定 第1部分： 撕裂方法的 恒定速度 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2003) |
| EN ISO 4674-2-1998 |
橡膠或塑料涂覆織物抗撕裂性測定第2部分：沖擊擺法 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998) |
| EN ISO 472-2001 |
塑料 詞匯 |
Plastics - Vocabulary (ISO 472:1999) |
| EN ISO 4753-1999 |
緊固件ISO米制外螺紋零件的末端 |
Fasteners - Ends of parts with external ISO metric screw thread (ISO 4753:1999) |
| EN ISO 4757-1994 |
螺釘用十字槽 |
Cross recesses for screws (ISO 4757:1983) |
| EN ISO 4759-1-2000 |
緊固件公差第1部分：螺栓、螺釘、螺柱和螺母產品等級A、B和C級 |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 4759-3-2000 |
緊固件公差第3部分：螺栓、螺釘和螺母用平墊圈產品等級A和C級 |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000) |
| EN ISO 4762-1997 |
內六角圓柱頭螺釘 |
Hexagon socket head cap screws (ISO 4762:1997) |
| EN ISO 4762-2004 |
內六角圓柱頭螺釘 |
|
| EN ISO 4796-1-2000 |
實驗室玻璃器皿瓶第1部分：螺紋口瓶 |
Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2000) |
| EN ISO 4796-2-2000 |
實驗室玻璃器皿瓶第2部分：錐型口瓶 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000) |
| EN ISO 4796-3-2000 |
實驗室玻璃器皿瓶第3部分：吸氣瓶 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000) |
| EN ISO 4823-2000 |
牙科學彈性體印模材料 |
Dentistry - Elastomeric impression materials (ISO 4823:2000) |
| EN ISO 483-1999 |
塑料水溶液在小密封器中恒定相對濕度值法 |
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value (ISO 483:1988) |
| EN ISO 4833-2003 |
食物與動物飼料的微生物學微生物計數的一般方法在攝氏30度時的菌落計數技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 degrees C (ISO 4883:2003) |
| EN ISO 4869-2-1995 |
聲學護聽器第2部分：佩帶護聽器時有效A－計權聲壓級的估算 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
| EN ISO 4869-4-2000 |
聲學護聽器第4部分：與電平有關聲音恢復耳罩的有效聲壓級的測量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998) |
| EN ISO 4871-1996 |
聲學機器和設備噪聲輻射值的確定和檢測 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN ISO 489-1999 |
塑料反射指數的測定 |
Plastics - Determination of refractive index (ISO 489:1999) |
| EN ISO 4892-1-2000 |
塑料實驗室光源暴露方法第1部分：通用指南 |
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999) |
| EN ISO 4892-2-1999 |
塑料實驗室光源暴露方法第2部分：氙弧燈 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994) |
| EN ISO 4892-3-1999 |
塑料實驗室光源暴露方法第3部分：UV熒光燈 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:1994) |
| EN ISO 4894-1-1999 |
塑料苯乙烯／丙烯腈(SAN)模塑和擠塑材料第1部分：命名體系和基本規范 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997) |
| EN ISO 4894-2-1999 |
塑料苯乙烯／丙烯腈(SAN)模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995) |
| EN ISO 4895-1999 |
塑料液態環氧樹脂結晶性的測定 |
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997) |
| EN ISO 4921-2001 |
針織品基本概念詞匯 |
Knitting - Basic concepts - Vocabulary (ISO 4921:2000) |
| EN ISO 4957-1999 |
工具鋼 |
Tool steels (ISO 4957:1999) |
| EN ISO 505-1999 |
傳送帶織物輸送帶抗撕裂強度的測定方法 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999) |
| EN ISO 5079-1995 |
紡織纖維單纖維斷裂強力和伸長率的測定 |
Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979) |
| EN ISO 5080-1999 |
劍麻農業用細繩 |
Sisal agricultural twines (ISO 5080:1994) |
| EN ISO 5084-1996 |
紡織品紡織品和紡織制品厚度的測定 |
Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996) |
| EN ISO 5135-1998 |
聲學在混響室中測定空調終端設備、空調終端單、阻尼器和調節閥門的噪聲功率級 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
| EN ISO 5136-2003 |
聲學 風機或其他空氣移動裝置輻射入管道中的聲功率的測定 管道法 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
| EN ISO 5155-1995 |
家用制冷設備冷凍食品儲藏柜和食品冷凍器特性和試驗方法 |
Household refrigerating appliances - Frozen food storage cabinets and food freezers - Characteristics and test methods (ISO 5155:1995) |
| EN ISO 5165-1998 |
石油產品柴油著火性能的測定十六烷值法 |
Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998) |
| EN ISO 5167-1-2003 |
用壓差裝置測量流體流量第1部分：圓截面管道中插入的節流孔板、噴嘴和文杜利管 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN ISO 5167-2-2003 |
圓截面管道中用壓差裝置測量流體流量第2部分：銳孔法 |
Measurement of fluid flow by means of pressure differential devices in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) |
| EN ISO 5167-3-2003 |
圓截面管道中用壓差裝置測量流體流量第3部分：噴嘴和文杜利噴嘴 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
| EN ISO 5167-4-2003 |
圓截面管道中用壓差裝置測量流體流量第4部分：文杜利管 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) |
| EN ISO 5172-1996 |
焊接、切割及加熱用手工焊炬規范和試驗 |
Manual blowpipes for welding, cutting and heating - Specifications and tests (ISO 5172:1995, including Amendment 1:1995) |
| EN ISO 5183-1-2000 |
電阻焊設備外錐度1:10電極接頭第1部分：錐度1:10圓錐形接頭 |
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998) |
| EN ISO 5183-2-2001 |
電阻點焊設備外錐度1:10電極接頭第2部分：端推力電極用平行柄接頭 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
| EN ISO 5198-1998 |
離心泵、混流泵和軸流泵液壓性能試驗規范精密級 |
Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987) |
| EN ISO 5199-2002 |
離心泵技術條件Ⅱ類 |
Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
| EN ISO 5210-1996 |
通用閥門多回轉閥門驅動裝置的連接 |
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991) |
| EN ISO 5211-2001 |
通用閥門轉動零件的激勵附件 |
Industrial valves - Part-turn actuator attachments (ISO 5211:2001) |
| EN ISO 5261-1999 |
技術制圖金屬棒的簡單表示和外形剖面 |
Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995) |
| EN ISO 5263-1-2004 |
紙漿.實驗室濕法分解.第1部分:化學紙漿的分解 |
|
| EN ISO 5263-1997 |
紙漿實驗室濕解離 |
Pulps - Laboratory wet disintegration (ISO 5263:1995) |
| EN ISO 5263-2-2004 |
紙漿.實驗室濕法分解.第2部分:20 鳦時機械紙漿的分解 |
|
| EN ISO 5263-3-2004 |
紙漿.實驗室濕法分解.第3部分:85 鳦時機械紙漿的分解 |
|
| EN ISO 5264-2-2002 |
紙漿 實驗室打漿 第2部分：PFI磨法 |
Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2002) |
| EN ISO 5267-1-2000 |
紙漿濾水性的測定第1部分：朔珀－瑞格勒法 |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999) |
| EN ISO 5269-1-2000 |
紙漿物理試驗用實驗室漿片的制備第1部分：常規紙頁的成型法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:1998) |
| EN ISO 5269-2-2000 |
紙漿物理試驗用實驗室漿片的制備第2部分：快速凱塞(Korhen)法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Korhen method (ISO 5269-2:1998) |
| EN ISO 527-1-1996 |
塑料拉伸性能的測定第1部分：一般原則 |
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994) |
| EN ISO 527-2-1996 |
塑料拉伸性能的測定第2部分：模壓和擠壓塑料試驗條件 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994) |
| EN ISO 527-4-1997 |
塑料拉伸性能的測定第4部分：各向同性及各向異性纖維增強塑料復合材料試驗條件 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) |
| EN ISO 527-5-1997 |
塑料拉伸性能的測定第5部分：?jiǎn)蜗蚶w維增強塑料復合材料試驗條件 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997) |
| EN ISO 5270-1999 |
紙漿實驗室紙頁物理性能的測定 |
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:1998) |
| EN ISO 5349-1-2001 |
機械振動人體手傳振動的測量與評估第1部分：一般要求 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN ISO 5349-2-2001 |
機械振動人體手傳振動的測量與評估第2部分：在車間測量的實用指南 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001) |
| EN ISO 5350-1-1998 |
紙漿塵埃和纖維束的估算第1部分：實驗室紙張檢驗 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets (ISO 5350-1:1998) |
| EN ISO 5350-2-1998 |
紙漿塵埃和纖維束的估算第2部分：磨木漿片檢驗 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998) |
| EN ISO 5353-1998 |
土方機械、農林用拖拉機和機械座椅標定點 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
| EN ISO 5356-1-2004 |
麻醉和呼吸設備.圓錐形接頭.第1部分:錐體和錐套 |
|
| EN ISO 536-1996 |
紙和紙板定量的測定 |
Paper and board - Determination of grammage (ISO 536:1995) |
| EN ISO 5366-1-2004 |
麻醉和呼吸設備.氣管造口插管.第1部分:成人用插管和接頭 |
|
| EN ISO 5377-1994 |
水解淀粉產品還原能力和葡萄塘當量的測定萊恩和埃諾常量滴定法 |
Starch hydrolysis products - Determination of reducing power and dextrose equivalent - Lane and Eynon constant titre method (ISO 5377:1981) |
| EN ISO 5378-1994 |
淀粉和淀粉制品用凱氏法測定氮的含量分光度法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Spectrophotometric method (ISO 5378:1978) |
| EN ISO 5381-1994 |
水解淀粉產品水含量的測定改進的卡爾．費休法 |
Starch hydrolysis products - Determination of water content - Modified Karl Fischer method (ISO 5381:1983) |
| EN ISO 5399-1998 |
皮革水溶性鎂鹽的測定乙二胺四乙酸滴定法 |
Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method (ISO 5399:1984) |
| EN ISO 5402-2002 |
皮革物理與機械試驗用撓度法測定伸縮阻力 |
Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method (ISO 5402:2002) |
| EN ISO 5403-2002 |
皮革物理與機械試驗柔軟皮革抗水性的測定 |
Leather - Physical and mechanical tests - Determination of water resistance of flexible leathers (ISO 5403:2002) |
| EN ISO 5404-2002 |
皮革物理與機械試驗厚皮革抗水性的測定 |
Leather - Physical and mechanical tests - Determination of water resistance of heavy leathers (ISO 5404:2002) |
| EN ISO 542-1995 |
油籽取樣 |
Oilseeds - Sampling (ISO 542:1990) |
| EN ISO 5436-1-2000 |
產品幾何量技術規范(GPS)表面結構：輪廓法測量標準第1部分：材料測量 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
| EN ISO 5436-2-2001 |
產品幾何量技術規范(GPS)表面結構：輪廓法測量標準第2部分：軟件測量標準 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001) |
| EN ISO 5455-1994 |
技術制圖比例尺 |
Technical drawings - Scales (ISO 5455:1979) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com