標準號 |
中文名稱 |
英文名稱 |
| BS EN 13491-2004 |
土工合成阻擋層.用作隧道和地下結構的流體阻擋層的特征要求 |
|
| BS EN 13492-2004 |
土工合成阻擋層.液體廢棄物處置場所、傳送站或二級容器結構中使用的阻擋層的特征要求 |
|
| BS EN 13494-2002 |
建筑設施用隔熱制品.隔熱材料底層和膠粘劑的粘附拉伸強度的測定 |
(Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material) |
| BS EN 13495-2003 |
建筑設施用隔熱產品.外部隔熱復合系統(ETICS)耐脫落的測定(泡沫塊試驗) |
(Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)) |
| BS EN 13496-2002 |
建筑設施用隔熱制品.玻璃纖維網狀物的機械性能的測定 |
(Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes) |
| BS EN 13497-2003 |
建筑設施用隔熱產品.外部隔熱復合系統(ETICS)耐沖擊的測定 |
(Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)) |
| BS EN 13498-2003 |
建筑設施用隔熱產品.外部隔熱復合系統(ETICS)耐滲透的測定 |
(Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)) |
| BS EN 13499-2003 |
建筑物保溫產品.基于多孔聚苯乙烯的外保溫復合系統(ETICS).規范 |
(Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification) |
| BS EN 135-1999 |
呼吸器官保護裝置.等義術語表 |
(Respiratory protective devices - List of equivalent terms) |
| BS EN 13500-2003 |
建筑物保溫產品.基于礦棉的外保溫復合系統(ETICS).規范 |
(Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification) |
| BS EN 135000-1978 |
電子器件質量評定協調體系.總規范.行波管放大器 |
(Harmonized system of quality assessment for electronic components - Generic specification: travelling wave amplifier tubes) |
| BS EN 135001-1978 |
電子件質量保證協調體系.空白詳細規范.功率小于500瓦的C、W功率行波管放大器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: CW power amplifier travelling wave tubes up to 500 watts) |
| BS EN 13501-1-2002 |
建筑產品和部件燃燒性能的分類.根據燃燒試驗反應的試驗數據進行分類 |
(Fire classification of construction products and building elements - Classification using test data from reaction to fire tests) |
| BS EN 13501-2-2003 |
施工產品和建筑部件的防火等級.根據防火試驗的數據進行分類(不包括通風設備) |
(Fire classification of construction products and building elements - Classification using data from fire resistance tests, excluding ventilation services) |
| BS EN 13502-2002 |
煙囪.泥土/陶瓷煙道帽的要求和試驗方法 |
(Chimneys - Requirements and test methods for clay/ceramic flue terminals) |
| BS EN 13503-3-2000 |
眼科植入物.眼內透鏡.機械特性和試驗方法 |
(Ophthalmic implants - Intraocular lenses - Mechanical properties and test methods) |
| BS EN 13503-5-2001 |
眼科植入物.眼內透鏡.生物適合性 |
(Ophthalmic implants - Intraocular lenses - Biocompatibility) |
| BS EN 13503-6-2002 |
眼科植入物.眼內透鏡.有效期和運輸穩定性 |
(Ophthalmic implants - Intraocular lenses - Shelf-life and transport stability) |
| BS EN 13503-7-2002 |
眼科植入物.眼內透鏡.門診調查 |
(Ophthalmic implants - Intraocular lenses - Clinical investigations) |
| BS EN 13503-8-2000 |
眼科植入物.眼內透鏡.基本要求 |
(Ophthalmic implants - Intraocular lenses - Fundamental requirements) |
| BS EN 13506-2002 |
水質.用原子熒光分光光度測定法測定汞 |
(Water quality - Determination of mercury by atomic fluorescence spectrometry) |
| BS EN 13507-2001 |
熱噴涂,熱噴涂件和金屬部件的表面預處理 |
(Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying) |
| BS EN 13508-1-2003 |
建筑物外部排水和污水道系統的條件.一般要求 |
(Condition of drain and sewer systems outside buildings - General requirements) |
| BS EN 13509-2003 |
陰極保護測量方法 |
(Cathodic protection measurement techniques) |
| BS EN 1351-1997 |
蒸氣強化加氣混凝土的彎曲拉伸強度的測定 |
(Determination of flexural strength of autoclaved aerated concrete) |
| BS EN 13510-2000 |
土方機械.傾翻保護結構.實驗室試驗和性能要求 |
(Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements) |
| BS EN 13511-2002 |
鞋類.鞋幫試驗方法.抗持久性損傷 |
(Footwear - Test methods for uppers - Resistance to damage on lasting) |
| BS EN 13512-2002 |
鞋類.鞋幫試驗方法.抗撓曲性 |
(Footwear - Test methods for uppers and lining - Flex resistance) |
| BS EN 13513-2002 |
鞋類.鞋幫試驗方法.形變性 |
(Footwear - Test methods for uppers - Deformability) |
| BS EN 13514-2002 |
鞋靴.鞋幫的試驗方法.耐剝離性 |
(Footwear - Test methods for uppers - Delamination resistance) |
| BS EN 13515-2002 |
鞋類.鞋幫和鞋襯的試驗方法.水氣滲透性和吸收性 |
(Footwear - Test methods for uppers and lining - Water vapour permeability and absorption) |
| BS EN 13516-2002 |
鞋類.鞋幫、鞋襯和內墊的試驗方法.橡膠的色牢度 |
(Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing) |
| BS EN 13517-2002 |
鞋靴.鞋幫、鞋襯和鞋里的試驗方法.掉色 |
(Footwear - Test methods for uppers, linings and insocks - Colour migration) |
| BS EN 13518-2002 |
鞋類.鞋幫的試驗方法.耐水性 |
(Footwear - Test methods for uppers - Water resistance) |
| BS EN 13519-2002 |
鞋類.鞋幫試驗方法.高溫性能 |
(Footwear - Test methods for uppers - High temperature behaviour) |
| BS EN 1352-1997 |
高壓蒸養加氣混凝土或開式結構輕集料混凝土在壓縮條件下靜彈性模量的測定 |
(Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure) |
| BS EN 13520-2002 |
鞋類.鞋幫、鞋襯和內墊的試驗方法.耐磨性 |
(Footwear - Test methods for uppers, lining and insocks - Abrasion resistance) |
| BS EN 13521-2002 |
鞋靴.鞋幫、鞋襯和鞋里的試驗方法.隔熱 |
(Footwear - Test methods for uppers, lining and insocks - Thermal insulation) |
| BS EN 13522-2002 |
鞋類.鞋幫的試驗方法.斷裂強度和伸長率 |
(Footwear - Test methods for uppers - Tensile strength and elongation) |
| BS EN 13523-0-2001 |
卷材覆層金屬.試驗方法..一般指導和試驗方法列表 |
(Coil coated metals - Test methods - General introduction and list of test methods) |
| BS EN 13523-1-2001 |
卷材覆層金屬.試驗方法.涂層厚度 |
(Coil coated metals - Test methods - Coating thickness) |
| BS EN 13523-10-2001 |
卷材覆層金屬.試驗方法.耐熒光紫外光線和水冷凝 |
(Coil coated metals - Test methods - Resistance to fluorescent UV light and water condensation) |
| BS EN 13523-11-2004 |
卷材覆層金屬.試驗方法.耐溶劑性(摩擦試驗) |
|
| BS EN 13523-11-2004 |
卷材覆層金屬.試驗方法.耐溶劑性(摩擦試驗) |
|
| BS EN 13523-12-2004 |
卷材覆層金屬.試驗方法.耐劃痕 |
|
| BS EN 13523-13-2001 |
卷材覆層金屬.試驗方法.耐熱加速老化性能 |
(Coil coated metals - Test methods - Resistance to accelerated ageing by the use of heat) |
| BS EN 13523-14-2001 |
卷材覆層金屬.試驗方法.粉化(Helmen法) |
(Coil coated metals - Test methods - Chalking (Helmen method)) |
| BS EN 13523-15-2002 |
卷材覆層金屬.試驗方法.位變異構 |
(Coil coated metals - Test methods - Metamerism) |
| BS EN 13523-16-2004 |
卷材覆層金屬.試驗方法.耐磨性 |
|
| BS EN 13523-17-2004 |
卷材覆層金屬.試驗方法.可剝離薄膜的粘結性 |
|
| BS EN 13523-18-2002 |
卷材覆層金屬.試驗方法.耐染色 |
(Coil coated metals - Test methods - Resistance to staining) |
| BS EN 13523-19-2004 |
卷材覆層金屬.試驗方法.大氣曝露試驗的樣板設計和方法 |
|
| BS EN 13523-2-2001 |
卷材覆層金屬.試驗方法.鏡面光澤 |
(Coil coated metals - Test methods - Specular gloss) |
| BS EN 13523-20-2004 |
卷材覆層金屬.試驗方法.泡沫材料粘結性 |
|
| BS EN 13523-21-2003 |
卷材覆層金屬.試驗方法.室外暴露板的評定 |
(Coil coated metals - Test methods - Evaluation of outdoor exposed panels) |
| BS EN 13523-22-2003 |
卷材覆層金屬.試驗方法.色差.視覺比較 |
(Coil coated metals - Test methods - Colour difference - Visual comparison) |
| BS EN 13523-23-2002 |
卷材覆層金屬.試驗方法.在含二氧化硫的潮濕氣氛中著色穩定性 |
(Coil coated metals - Test methods - Colour stability in humid atmospheres containing sulfur dioxide) |
| BS EN 13523-24-2004 |
卷材覆層金屬.試驗方法.耐粘結性和壓力標記 |
|
| BS EN 13523-3-2001 |
卷材覆層金屬.試驗方法.顏色差異.儀器比較 |
(Coil coated metals - Test methods - Colour difference - Instrumental comparison) |
| BS EN 13523-4-2001 |
卷材覆層金屬.試驗方法.鉛筆硬度 |
(Coil coated metals - Test methods - Pencil hardness) |
| BS EN 13523-5-2001 |
卷材覆層金屬.試驗方法.快速變形的耐性(沖擊試驗) |
(Coil coated metals - Test methods - Resistance to rapid deformation (impact test)) |
| BS EN 13523-6-2002 |
卷材覆層金屬.試驗方法.做成刻紋后粘結(杯形擠壓試驗) |
(Coil coated metals - Test methods - Adhesion after indentation (cupping test)) |
| BS EN 13523-7-2001 |
卷材覆層金屬.試驗方法.彎曲開裂的耐性(T彎曲試驗) |
(Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)) |
| BS EN 13523-8-2002 |
卷材覆層金屬.試驗方法.耐鹽霧試驗 |
(Coil coated metals - Test methods - Resistance to salt spray (fog)) |
| BS EN 13523-9-2001 |
卷材覆層金屬.試驗方法.耐水浸性能 |
(Coil coated metals - Test methods - Resistance to water immersion) |
| BS EN 13524-2003 |
公路維護設備.安全要求 |
(Highway maintenance machines - Safety requirements) |
| BS EN 13526-2002 |
固定源排放.使用溶劑過程產生的廢氣中總的氣態有機碳的物質濃度的測定.持續火焰離化探測儀法 |
(Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method) |
| BS EN 13527-2000 |
遮板和遮簾.操縱力的測量.試驗方法 |
(Shutters and blinds - Measurement of operating force - Test methods) |
| BS EN 13528-1-2002 |
環境空氣質量.測定氣體和蒸汽的濃縮度的擴散樣品.要求和試驗方法.一般要求 |
(Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements) |
| BS EN 13528-2-2002 |
環境空氣質量.測定氣體和蒸汽的濃縮度的擴散樣品.要求和試驗方法.特殊要求和試驗方法 |
(Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods) |
| BS EN 13529-2003 |
混凝土結構的保護和維修用產品和系統.試驗方法.耐強化學性腐蝕的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to severe chemical attack) |
| BS EN 1353-1997 |
高壓蒸養加氣混凝土的水含量測定 |
(Determination of moisture content of autoclaved aerated concrete) |
| BS EN 13530-1-2002 |
低溫容器.大的可運輸真空隔熱容器的功能要求 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Fundamental requirements) |
| BS EN 13530-2-2002 |
低溫容器.大型可運輸真空隔熱容器的設計、生產、檢測和測試方法 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Design, fabrication, inspection and testing) |
| BS EN 13531-2001 |
土方機械.壓實挖掘機的傾翻防護結構(TOPS).實驗室試驗和性能要求 |
(Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements) |
| BS EN 13532-2002 |
自測試用在玻璃試管內診斷的醫療裝置一般要求 |
(General requirements for in vitro diagnostic medical devices for self-testing) |
| BS EN 13535-2001 |
肥料和石灰浸物質.分類 |
(Fertilizers and liming materials - Classification) |
| BS EN 13536-2002 |
填充有羽毛和絨毛的人造物品.服裝的要求.輕便服裝 |
(Manufactured articles filled with feather and down - Requirements for clothing - Light use) |
| BS EN 13537-2002 |
睡袋的要求 |
(Requirements for sleeping bags) |
| BS EN 13538-1-2002 |
睡袋尺寸特性的測定.內部尺寸 |
(Determination of dimensional characteristics of sleeping bags - Internal dimensions) |
| BS EN 13538-2-2002 |
睡袋尺寸特性的測定.厚度和彈性復原 |
(Determination of dimensional characteristics of sleeping bags - Thickness and elastic recovery) |
| BS EN 13538-3-2002 |
睡袋尺寸特性的測定.加載下真空度和包裝的容易性 |
(Determination of dimensional characteristics of sleeping bags - Volume under load and easiness of packing) |
| BS EN 1354-1997 |
開式結構輕集料混凝土壓縮強度的測定 |
(Determination of compressive strength of lightweight aggregate concrete with open structure) |
| BS EN 1354-2005 |
開式結構輕集料混凝土抗壓強度的測定 |
|
| BS EN 13540-2002 |
皮革.物理和機械試驗.漆皮耐熱性的測定 |
(Leather - Physical and mechanical tests - Determination of heat resistance of patent leather) |
| BS EN 13541-2001 |
建筑物用玻璃.保險玻璃.爆炸壓力的抗性的試驗和分類 |
(Glass in building - Security glazing - Testing and classification of resistance against explosion pressure) |
| BS EN 13542-2001 |
填充羽毛和羽絨的制物.衣服壓縮系數的測定方法 |
(Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing) |
| BS EN 13543-2001 |
填充有羽毛和絨毛的人造物品.填充材料吸水性的測量 |
(Manufactured articles filled with feather and down - Measurement of water absorption of filling material) |
| BS EN 13544-1-2001 |
呼吸療法設備.霧化系統及其件 |
(Respiratory therapy equipment - Nebulizing systems and their components) |
| BS EN 13544-2-2002 |
呼吸治療設備.管道和連接件 |
(Respiratory therapy equipment - Tubing and connectors) |
| BS EN 13544-3-2001 |
呼吸療法設備.加氣處理裝置 |
(Respiratory therapy equipment - Air entrainment devices) |
| BS EN 13545-2002 |
托盤的上部結構.托盤卡套的試驗方法和性能要求 |
(Pallet superstructures - Pallet collars - Test methods and performance requirements) |
| BS EN 13546-2002 |
防護服.場上守門員用手、臂、腹部、胸、腿、腳和生殖器保護器具和場上運動員用的皮膚保護器具.要求和試驗方 |
(Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goalkeepers, and shin protectors for field players - Requirements and test methods) |
| BS EN 13549-2001 |
清潔服務.質量測量系統的基本要求和推薦方法 |
(Cleaning services - Basic requirements and recommendations for quality measuring systems) |
| BS EN 1355-1997 |
高壓蒸養加氣混凝土或開式結構輕集料混凝土在壓縮條件下蠕動變形的測定 |
(Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure) |
| BS EN 13551-2003 |
內路航行運載工具.詞匯 |
(Inland navigation vessels - Vocabulary) |
| BS EN 13553-2002 |
彈性地板覆蓋物.專用于潮濕區域的聚氯乙烯地板覆蓋物.規范 |
(Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification) |
| BS EN 13554-2002 |
無損檢驗.聲音的發射.一般原理 |
(Non-destructive testing - Acoustic emission - General principles) |
| BS EN 13555-2004 |
法蘭及其接件.與有墊圈圓形法蘭連接件的設計規則有關的墊圈參數和試驗方法 |
|
| BS EN 13556-2003 |
圓木和鋸材.歐洲用木材的命名 |
(Round and sawn timber - Nomenclature of timbers used in Europe) |
| BS EN 13557-2003 |
起重機.控制裝置與控制臺 |
(Cranes - Controls and control stations) |
| BS EN 13558-2003 |
家用淋浴間底盤用沖擊性能改進的擠制丙烯酸薄板材規范 |
(Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes) |
| BS EN 13559-2003 |
家用浴缸及淋浴間底盤用沖擊性能改進的共擠壓制ABS/丙烯酸薄板材規范 |
(Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes) |
| BS EN 1356-1997 |
橫向負載下敞口結構輕集料混凝土或高壓多孔混凝土預制增強組分的性能試驗 |
(Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load) |
| BS EN 13560-2002 |
表面活性劑.測定酰胺氮含量.電勢滴定法 |
(Surface active agents - Determination of amide nitrogen content - Potentiometric titration) |
| BS EN 13561-2004 |
外部百葉簾.包括安全在內的性能要求 |
|
| BS EN 13562-2000 |
土工織物及其相關產品.水滲透抗性的測定(液體靜壓力試驗) |
(Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test)) |
| BS EN 13564-1-2002 |
建筑用抗洪設備.要求 |
(Anti-flooding devices for buildings - Requirements) |
| BS EN 13564-2-2003 |
建筑物用防水淹裝置.試驗方法 |
(Anti-flooding devices for buildings - Test methods) |
| BS EN 13564-3-2003 |
建筑物防溢流設備.質量保證 |
(Anti-flooding devices for buildings - Quality assurance) |
| BS EN 13565-1-2004 |
固定滅火設備.泡沫設備.件的要求和試驗方法 |
|
| BS EN 13566-1-2003 |
地下非壓力排水網翻新用塑料管道系統.總則 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - General) |
| BS EN 13566-3-2003 |
地下非壓力排水網翻新用塑料管道系統.緊密配合管加襯 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes) |
| BS EN 13566-4-2003 |
地下非壓力排水網翻新用塑料管道系統.硫化管加襯 |
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes) |
| BS EN 13567-2002 |
擊劍用手、臂、胸、腹部、腿、生殖器和臉部的防護器具要求和試驗方法 |
(Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods) |
| BS EN 13569-2001 |
艙室用滾軸毛巾.性能要求和加工 |
(Cabinet roller towels - Performance requirements and processing) |
| BS EN 13570-2005 |
食品加工機械.混合器和攪拌機.安全和衛生要求 |
|
| BS EN 13571-2002 |
鞋類.鞋幫、鞋襯和內墊試驗方法.扯裂強度 |
(Footwear - Test methods for uppers, lining and insocks - Tear strength) |
| BS EN 13572-2002 |
鞋類.鞋幫、鞋襯和內墊試驗方法.縫隙強度 |
(Footwear - Test methods for uppers, lining and insocks - Seam strength) |
| BS EN 13573-2001 |
內陸航運船舶.拋錨,耦合,拖曳,牽引和停泊系統 |
(Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com