標準號 |
中文名稱 |
英文名稱 |
| DIN EN 1888-2003 |
兒童用品.輪式兒童車輛.安全要求和試驗方法 |
(Child care articles - Wheeled child conveyances - Safety requirements and test methods; German version EN 1888:2003) |
| DIN EN 1888-2005 |
兒童護理用品.輪式兒童車輛.安全要求和試驗方法 |
|
| DIN EN 1890 Berichtigung 1-2004 |
DIN EN 1890-1999的勘誤 |
|
| DIN EN 1890-1999 |
表面活性材料.非離子,用環氧乙烷制作表面活性材料堆積的濁點的測量 |
(Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide; German version EN 1890:1999) |
| DIN EN 1891-1998 |
防墜落用人員防護裝置.低膨脹芯套繩 |
(Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes; German version EN 1891:1998) |
| DIN EN 1892-2005 |
高級工業陶瓷.惰性氣體高溫環境下陶瓷組分的機械特性.抗拉特性測定 |
|
| DIN EN 1893-2005 |
高級工業陶瓷.大氣壓力高溫環境中陶瓷組分的機械特性.抗拉特性測定 |
|
| DIN EN 1894-2005 |
高級工業陶瓷.惰性氣體高溫環境中陶瓷組分的機械特性.有凹槽試樣在壓力荷載下剪切強度的測定 |
|
| DIN EN 1895-2002 |
包裝和一次性衛生制品用紙和紙板的膠粘劑.柔性組裝的180°“T“型剝離試驗 |
(Adhesives for paper and board, packaging and disposable sanitary products - 180?“T“ peel test for a flexible-to-flexible assembly; German version EN 1895:2001) |
| DIN EN 1896-2001 |
紙和紙板、包裝和一次性衛生用品用粘結劑.拉伸和抗拉強度的測定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001) |
| DIN EN 1897-2002 |
土工織物及其相關產品.壓縮蠕變特性的測定 |
(Geotextiles and geotextile-related products - Determination of the compressive creep properties; German version EN 1897:2001) |
| DIN EN 1898-2001 |
無危險物用中間柔性大包裝容器(FIBC)的規范 |
(Specifications for flexible intermediate bulk containers (FIBC) for non-dangerous goods; German version EN 1898:2000) |
| DIN EN 1899-1-1998 |
水質.n天后(BODn)對生化氧需求的測定.第1部分:用烯丙基硫脲添加物的稀釋和接種法 |
(Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 1: Dilution and seeding method with allylthiourea acid addition (ISO 5815:1989, modified); German version EN 1899-1:1998) |
| DIN EN 1899-2-1998 |
水質.n天后(BODn)對生化氧需求的測定.第2部分:非稀釋試樣法 |
(Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 2: Method for undiluted samples (ISO 5815:1989, modified); German version EN 1899-2:1998) |
| DIN EN 19-2002 |
工業用閥門.金屬閥標志 |
(Industrial valves - Marking of metallic valves; German version EN 19:2002) |
| DIN EN 1900-1998 |
和食品接觸的材料和物件.非金屬成套貴重餐具.術語 |
(Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology; German version EN 1900:1998) |
| DIN EN 190000-1996 |
總規范.單片集成電路 |
(Generic specification: Monolithic integrated circuits; German version EN 190000:1995) |
| DIN EN 190100-1995 |
分規范.數字單片集成電路 |
(Sectional specification: Digital monolithic integrated circuits; German version EN 190100:1993) |
| DIN EN 190101-1996 |
類規范.TTL數字集成電路.系列54,64,74,84 |
(Family specification - Digital integrated TTL circuits - Series 54, 64, 74, 84; German version EN 190101:1994) |
| DIN EN 190102-1996 |
類規范.TTL肖脫基數字集成電路.系列54S,64S,74S,84S |
(Family specification - TTL Schottky digital integrated circuits - Series 54 S, 64 S, 74 S, 84 S; German version EN 190102:1994) |
| DIN EN 190103-1996 |
類規范.TTL肖脫基低功率數字集成電路.系列54LS,64LS,74LS,84LS |
(Family specification - Digital integrated TTL low power Schottky circuits - Series 54 LS, 64 LS, 74 LS, 84 LS; German version EN 190103:1994) |
| DIN EN 190106-1996 |
類規范.TTL超前肖脫基低功率數字集成電路.系列54ALS,64ALS,74ALS,84ALS |
(Family specification - TTL Advanced Low Power Schottky digital integrated circuits - Series 54 ALS, 74 ALS; German version EN 190106:1994) |
| DIN EN 190107-1996 |
類規范.TTL快式數字集成電路.系列54F,74F |
(Family specification - TTL FAST digital integrated circuits - Series 54 F, 74 F; German version EN 190107:1994) |
| DIN EN 190108-1996 |
類規范.TTL超前肖脫基數字集成電路.系列54AS,74AS |
(Family specification - TTL advanced Schottky digital integrated circuits - Series 54 AS, 74 AS; German version EN 190108:1994) |
| DIN EN 190109-1996 |
類規范.HCMOS數字集成電路.系列HC/HCT/HCU |
(Family specification - Digital integrated HC MOS circuits - Series HC/HCT/HCU; German version EN 190109:1994) |
| DIN EN 190110-1996 |
空白詳細規范.集成微處理器電路 |
(Blank detail specification - Digital microprocessor integrated circuits; German version EN 190110:1994) |
| DIN EN 190116-1995 |
類規范.ACMOS集成數字電路 |
(Family specification: AC MOS digital integrated circuits; German version EN 190116:1993) |
| DIN EN 1902-1999 |
膠粘劑.地板和墻壁鋪面用膠粘劑的檢驗方法.剪切蠕變試驗 |
(Adhesives - Test method for adhesives for floor coverings and wall coverings - Shear creep test; German version EN 1902:1999) |
| DIN EN 1903-1999 |
膠粘劑.塑料和橡膠制地板和墻壁鋪面用膠粘劑的檢驗方法.測定加速老化后的尺寸變化 |
(Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing; German version EN 1903:1999) |
| DIN EN 1904-2001 |
貴金屬.與貴金屬珠寶合金一起使用的焊料的細度 |
(Precious metal - The finenesses of solders used with precious metal jewellery alloys; German version EN 1904:2000) |
| DIN EN 1905-1999 |
未增塑劑聚氯乙烯(PVC-V)制造的管,管件和材料.在總的氯含量基礎上測定聚氯乙烯含量的方法 |
(Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998) |
| DIN EN 1906-2002 |
建筑五金件.杠桿式門拉手和旋鈕裝置.要求和試驗方法 |
(Building hardware - Lever handles and knob furniture - Requirements and test methods; German version EN 1906:2002) |
| DIN EN 1908-2005 |
載人員用索道裝置的安全要求.拉緊設備 |
|
| DIN EN 1909-2005 |
載人用索道裝置的安全要求.恢復和撤離 |
|
| DIN EN 1910-2000 |
木材、拼鑲地板和木材鑲板和包覆.尺寸穩定性測定 |
(Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability; German version EN 1910:2000) |
| DIN EN 1911-1-1998 |
固定源放射.手動法測定HCI.第1部分:試樣氣體吸入 |
(Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases; German version EN 1911-1:1998) |
| DIN EN 1911-2-1998 |
固定源放射.手動法測定HCI.第2部分:氣態化合物的吸收 |
(Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption; German version EN 1911-2:1998) |
| DIN EN 1911-3-1998 |
固定源放射.手動法測定HCI.第3部分:吸收溶液分析和結果計算 |
(Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation; German version EN 1911-3:1998) |
| DIN EN 1912-1998 |
支撐用建筑木材.強度等級.按目測種類等級和木材品種分派 |
(Structural timber - Strength classes - Assignment of visual grades and species; German version EN 1912:1998) |
| DIN EN 1914-1997 |
內河航運用船舶.船載小艇 |
(Inland navigation vessels - Ship`s boats; German version EN 1914:1997) |
| DIN EN 1915-1-2001 |
飛行器地面支持設備.一般要求.第1部分:基本安全要求 |
(Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements; German version EN 1915-1:2001) |
| DIN EN 1915-2-2001 |
飛行器地面支持設備.一般要求.第2部分:穩定性和強度要求、計算和試驗方法 |
(Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods; German version EN 1915-2:2001) |
| DIN EN 1915-3-2005 |
飛行器地面支持設備.一般要求.第3部分:振動測量方法和減振 |
|
| DIN EN 1915-4-2005 |
飛行器地面支持設備.一般要求.第4部分:噪聲測量方法和減噪 |
|
| DIN EN 1916 Berichtigung 1-2004 |
DIN EN 1916-2003的勘誤 |
|
| DIN EN 1916-2003 |
未加筋、鋼纖維和加筋混凝土管和配件 |
(Concrete pipes and fittings, unreinforced, steel fibre and reinforced; German version EN 1916:2002) |
| DIN EN 1917 Berichtigung 1-2004 |
DIN EN 1917-2003的勘誤 |
|
| DIN EN 1917-2003 |
未加筋、鋼纖維和加筋混凝土人孔和檢驗室 |
(Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced; German version EN 1917:2002) |
| DIN EN 1918-1-1998 |
供氣系統.氣體地下儲藏.第1部分:含水層中儲藏的功能推薦標準 |
(Gas supply systems - Underground gas storage - Part 1: Functional recommendations for storage in aquifers; German version EN 1918-1:1998) |
| DIN EN 1918-2-1998 |
供氣系統.氣體的地下存儲.第2部分:油田和天然氣中存儲用功能的建議 |
(Gas supply systems - Unterground gas storage - Part 2: Functional recommendations for storage in oil and gas fields; German version EN 1918-2:1998) |
| DIN EN 1918-3-1998 |
供氣系統.氣體的地下存儲.第3部分:溶解鹽穴中存儲用功能建議 |
(Gas supply systems - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt cavities; German version EN 1918-3:1998) |
| DIN EN 1918-4-1998 |
供氣系統.氣體的地下存儲.第4部分:巖石洞穴中存儲用功能建議 |
(Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns; German version EN 1918-4:1998) |
| DIN EN 1918-5-1998 |
供氣系統.氣體的地下存儲.第5部分:地面設備功能建議 |
(Gas supply systems - Underground gas storage - Part 5: Functional recommendations for surface facilities; German version EN 1918-5:1998) |
| DIN EN 1919-2000 |
可移動氣瓶.液化氣(包括乙炔和液化石油氣)用氣瓶.填充時的檢查 |
(Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling; German version EN 1919:2000) |
| DIN EN 1920-2000 |
可移動氣瓶.壓縮氣體(包括乙炔)用氣瓶.填充時的檢查 |
(Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling; German version EN 1920:2000) |
| DIN EN 1922-1997 |
信息技術.與電傳服務相互配合用的信號存儲和編碼 |
(Information technology - Character repertoire and coding for interworking with telex services; German version EN 1922:1997) |
| DIN EN 1923-1998 |
信息技術.歐洲字符集和它們的編碼.8位單字節編碼 |
(Information technology - European character repertoires and their coding - 8 bit single byte coding; German version EN 1923:1998) |
| DIN EN 1925-1999 |
天然石料的檢驗方法.由于毛細作用產生的吸水系數的測定 |
(Natural stone test methods - Determination of water absorption coefficient capillarity; German version EN 1925:1999) |
| DIN EN 1926-1999 |
天然石料的檢驗方法.抗壓強度的檢驗方法 |
(Natural stones test methods - Determination of compressive strength; German version EN 1926:1999) |
| DIN EN 1928-2000 |
防水用撓性板.屋頂防水用瀝青、塑料和橡膠薄板.水密性的測定 |
(Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; German version EN 1928:2000) |
| DIN EN 1929-1-1998 |
超市購物車.第1部分:帶或者不帶兒童座位的超市購物車的要求和檢驗 |
(Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without child carrying facility; German version EN 1929-1:1998) |
| DIN EN 1929-2-2005 |
超市購物車.第2部分:用于載客傳送帶的帶或不帶兒童座位的超市購物車的要求、試驗和檢驗 |
|
| DIN EN 1929-3-2005 |
超市購物車.第3部分:有或無兒童乘坐設備的帶附加載貨設施的超市購物車的要求和試驗 |
|
| DIN EN 1929-4-2005 |
超市購物車.第4部分:用于載客傳送帶的有或無兒童乘坐設備的帶附加載貨設施的超市購物車的要求和試驗 |
|
| DIN EN 1929-7-2005 |
超市購物車.第7部分:有兒童乘坐設備的超市購物車的要求和試驗 |
|
| DIN EN 1930 Berichtigung 1-2004 |
DINEN1930-2000的勘誤 |
(Corrigenda to DIN EN 1930:2000-11) |
| DIN EN 1930 Berichtigung 1-2004 |
DIN EN 1930-2000的勘誤 |
|
| DIN EN 1930-2000 |
兒童護理用品.安全屏障.安全要求和試驗方法 |
(Child care articles - Safety barriers - Safety requirements and test methods; German version EN 1930:2000) |
| DIN EN 1931-2001 |
防水用撓性薄板.屋頂防水用瀝青、塑料和橡膠薄板.水蒸氣滲透性測定 |
(Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties; German version EN 1931:2000) |
| DIN EN 1932-2001 |
外遮簾和遮板.對風負載的耐性.試驗方法 |
(External blinds and shutters - Resistance to wind loads - Method of testing; German version EN 1932:2001) |
| DIN EN 1933-1999 |
遮篷.抗由于水積累引起的負載的強度.檢驗方法 |
(Exterior blinds - Resistance to load due to water accumulation - Test method; German version EN 1933:1998) |
| DIN EN 1934-1998 |
建筑物的熱性能.熱阻測量.使用熱流計的熱箱法.砌墻工作 |
(Termal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry; German version EN 1934:1998) |
| DIN EN 1935-2002 |
建筑五金件.單軸鉸鏈.要求和試驗方法 |
(Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002) |
| DIN EN 1936-1999 |
天然石料的檢驗.凈密度,粗密度,開口孔隙率和全部孔隙率的測定 |
(Natural stone test methods - Determination of real density and apparant density and of total and open porosity; German version EN 1936:1999) |
| DIN EN 1937-1999 |
膠粘劑.液壓硬化地板刮鏟質量的檢驗方法.標準混合法 |
(Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures; German version EN 1937:1999) |
| DIN EN 1938-1998 |
人員的眼睛保護.摩托車和機用腳踏兩用車駕駛員用防護鏡 |
(Personal eye protection - Goggles for motorcycle and moped users; German version EN 1938:1998) |
| DIN EN 1939-1996 |
膠粘帶.不銹鋼或其背面上粘接力的測定 |
(Self adhesive tapes - Measurement of peel adhesion from stainless steel or from its own backing; German version EN 1939:1996) |
| DIN EN 1940-1996 |
膠粘帶.測量斷裂強度 |
(Self adhesive tapes - Measurement of breaking strength; German version EN 1940:1996) |
| DIN EN 1941-1996 |
膠粘帶.測量斷裂伸長率 |
(Self adhesive tapes - Measurement of elongation at break; German version EN 1941:1996) |
| DIN EN 1942-1996 |
膠粘帶.測量厚度 |
(Self adhesive tapes - Measurement of thickness; German version EN 1942:1996) |
| DIN EN 1942-2003 |
自膠粘帶.厚度測量 |
(Self adhesive tapes - Measurement of thickness; German version EN 1942:2003) |
| DIN EN 1943-2003 |
膠粘帶.靜負荷下抗剪強度的測定 |
(Self adhesive tapes - Measurement of static shear adhesion; German version EN 1943:2002) |
| DIN EN 1944-1996 |
膠粘帶.低速下測量打開粘結卷筒的力 |
(Self adhesive tapes - Measurement of unwind adhesion at low speed; German version EN 1944:1996) |
| DIN EN 1945-1996 |
膠粘帶.測量快粘力 |
(Self adhesive tapes - Measurement of quick stick; German version EN 1945:1996) |
| DIN EN 1946-1-1999 |
建筑產品和建筑部件的熱技術性能.測定熱傳導性能時實驗室評估用技術標準.第1部分:通用有效規則 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria; German version EN 1946-1:1999) |
| DIN EN 1946-2-1999 |
建筑產品和建筑部件的熱技術性能.測定熱傳導性能時實驗室評估用技術標準.第2部分:用平板儀法測量 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by the guarded hot plate method; German version EN 1946-2:1999) |
| DIN EN 1946-3-1999 |
建筑產品和建筑部件的熱技術性能.測定熱傳導性能時實驗室評估用技術標準.第2部分:用熱流測量平板儀法測量 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by the guarded heat flow meter method; German version EN 1946-3:1999) |
| DIN EN 1946-4-2000 |
建筑產品和建筑部件的熱性能.熱傳導性能測定的實驗室評估用技術標準.第4部分:高溫試驗室測量法 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; German version EN 1946-4:2000) |
| DIN EN 1946-5-2000 |
建筑產品和部件的熱性能.熱傳導性能測量的實驗室評估用技術標準.第5部分:管試驗測量法 |
(Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; German version EN 1946-5:2000) |
| DIN EN 1947-2002 |
消防軟管.泵和水車用半硬度輸水軟管和軟管組合件 |
(Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles; German version EN 1947:2002) |
| DIN EN 1948-1-1997 |
固定能源的放射.PCDDs/PCDFs質量濃度的測定.第1部分:取樣 |
(Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 1: Sampling; German version EN 1948-1:1996) |
| DIN EN 1948-2-1997 |
固定能源的放射.PCDDs/PCDFs質量濃度的測定.第2部分:萃取和凈化 |
(Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up; German version EN 1948-2:1996) |
| DIN EN 1948-3-1997 |
固定能源的放射.PCDD/PCDF質量濃縮測定.第3部分:識別和定量 |
(Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification; German version EN 1948-3:1996) |
| DIN EN 1949-2002 |
在休閑旅居車和其他道路車輛中石油液化氣系統的安裝規范 |
(Specification for the installation of LPG systems for habitation purposes in leisure accomodation vehicles and other road vehicles; German version EN 1949:2002) |
| DIN EN 1953-1998 |
涂層材料用噴霧器和噴射器.安全性要求 |
(Atomising and spraying equipment for coating materials - Safety requirements; German version EN 1953:1998) |
| DIN EN 1957-2000 |
家具.床和床墊.功能特性測定的試驗方法 |
(Domestic furniture - Beds and mattresses - Test methods for the determination of functional characteristics; German version EN 1957:2000) |
| DIN EN 196-1-1995 |
水泥的檢驗方法.第1部分:強度測定 |
(Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:1994) |
| DIN EN 196-1-2005 |
水泥的試驗方法.第1部分:強度測定 |
|
| DIN EN 196-2-1995 |
水泥的試驗方法.水泥的化學分析 |
(Methods of testing cement - Part 2: Chemical analysis of cement; German version EN 196-2:1994) |
| DIN EN 196-2-2005 |
水泥的試驗方法.第2部分:水泥的化學分析 |
|
| DIN EN 196-2-2005 |
水泥的試驗方法.第2部分:水泥的化學分析 |
|
| DIN EN 196-21-1990 |
水泥的檢驗方法.水泥中的氯.氧化碳和堿成分的測定 |
(Methods of testing cement; determination of the chloride carbon dioxide and alkali content of cement; german version EN 196-21:1989) |
| DIN EN 196-3-1995 |
水泥的檢驗方法.凝固時間和體積的穩定性測定 |
(Methods of testing cement - Part 3: Determination of setting time and soundness; German version EN 196-3:1994) |
| DIN EN 196-3-2005 |
水泥的試驗方法.第3部分:凝固時間和堅固性測定 |
|
| DIN EN 196-5-1995 |
水泥的檢驗方法.第5部分:爐渣水泥的凝硬性檢驗 |
(Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement; German version EN 196-5:1994) |
| DIN EN 196-5-2005 |
水泥的試驗方法.第5部分:火山灰水泥的凝結試驗 |
|
| DIN EN 196-6-1990 |
水泥的檢驗方法.研磨精度的測定 |
(Methods of testing cement; determination of fineness; german version EN 196-6:1989) |
| DIN EN 196-7-1990 |
水泥的檢驗方法.水泥取樣和試樣選擇的方法 |
(Methods of testing cement; methods of taking and preparing samples of cement; german version EN 196-7:1989) |
| DIN EN 196-8-2004 |
水泥的檢驗方法.第8部分:水合熱.溶解法 |
(Methods of testing cement - Part 8: Heat of hydration - Solution method; German version EN 196-8:2003) |
| DIN EN 196-8-2004 |
水泥的檢驗方法.第8部分:水合熱.溶解法 |
|
| DIN EN 196-9-2004 |
水泥的檢驗方法.第9部分:水合熱.半絕熱法 |
(Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method; German version EN 196-9:2003) |
| DIN EN 196-9-2004 |
水泥的檢驗方法.第9部分:水合熱.半絕熱法 |
|
| DIN EN 196000-1992 |
行業基礎規范.電機的開關設備 |
(Generic specification: electromechanical switches; german version EN 196000:1992) |
| DIN EN 196000/A1-2002 |
總規范:電機開關.修改件A1 |
(Generic specification: Electromechanical switches; Amendment A1; German version EN 196000:1992/A1:2001) |
| DIN EN 196103-2000 |
空白詳細規范.旋轉式開關.Y級評定 |
(Blank detail specification - Rotary switches - Assessment level Y; German version EN 196103:1998) |
| DIN EN 1963-1998 |
織物地板鋪面.用踏輪裝置檢驗 |
(Textile floor coverings - Tests using the lisson tretrad machine; German version EN 1963:1997) |
| DIN EN 1964-1-1999 |
容量從0,5立升到150立升(含150立升)鋼制無縫可重復裝填便攜式煤氣瓶設計和結構的規范. |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 1: Cylinders made of seamless steel with an R va |
| DIN EN 1964-2-2002 |
可運輸氣瓶.水容量由0.5升到150升(包括150升)的可再填充可運輸無縫鋼制氣體瓶的設計和制造規范.第2部分:閥 |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R va |
| DIN EN 1964-3-2000 |
移動式氣瓶.容量從0.5升到150升(含150升)可重復裝填移動式無縫鋼制氣瓶的設計和結構規范.第3部分:最大R值小 |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of stainless steel with a maximum R va |
| DIN EN 196403-2000 |
空白詳細規范.按鈕式開關.Y級評定 |
(Blank detail specification - Push button switches - Assessment level Y; German version EN 196403:1998) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com