標準號 |
中文名稱 |
英文名稱 |
| ENV 50275-2-4-1998 |
電動車輛的充電第2-4部分：車下充電器和電動車輛之間的通信規約 |
Conductive charging for electric vehicles - Part 2-4: Communication protocol between off-board charger and electric vehicle |
| ENV 50354-2001 |
工人暴露于電弧的危險下使用的材料和衣著的電弧試驗方法 |
Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc |
| ENV 581-2-2000 |
戶外家具 野營、家用和訂做的座椅和桌子 第2部分：樣品的機械安全要求和試驗方法 |
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for sampling |
| ENV 583-6-2000 |
無損檢測 超聲波檢驗 第6部分：作為間隔性波分級和探測方法的飛行時間衍射技術 |
Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| ENV 606-1992 |
鋼制品用條碼運輸和處理標簽 |
Bar coded transport and handling labels for steel products |
| ENV 60695-2-4/2-1995 |
火災危害試驗第2部分：試驗方法第4節／活頁2：標稱５００Ｗ火焰試驗和指南 |
Fire hazard testing - Part 2: Test methods - Section 4/sheet 2: 500 W nominal test flames and guidance (IEC 60695-2-4/2:1994) |
| ENV 61072-1993 |
評定絕緣材料耐電樹生成的試驗方法 |
Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees (IEC 61072:1991) |
| ENV 61111-2001 |
電工用絕緣材料墊 |
Matting of insulating material for electrical purposes (IEC 61111:1992 + Corrigendum 2000, modified) |
| ENV 61112-2001 |
電工用絕緣材料墊 |
Blankets of insulating material for electrical purposes (IEC 61112:1992 + Corrigendum 2000, modified) |
| ENV 61400-1-1995 |
風輪發電機系統第1部分：安全要求 |
Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1994) |
| ENV 623-4-1993 |
先進技術陶瓷 單片陶瓷 一般和紋理特性 第4部分：表面粗糙度的測定 |
Advanced technical ceramics; monolithic ceramics; general and textural properties; part 4: determination of surface roughness |
| ENV 623-5-2002 |
先進技術陶瓷 單片陶瓷 一般和紋理特性 第5部分：顯微照片法測定相位容積率 |
Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs |
| ENV 635-4-1996 |
膠合板 按表觀分類 第4部分：成品性能參數、指南 |
Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
| ENV 658-6-1993 |
先進技術陶瓷 室溫下陶瓷復合物的力學性質 第6部分：雙沖剪切下剪切強度的測定 |
Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 6: determination of shear strength by double-punch shearing |
| ENV 717-1-1998 |
木基板 甲醛釋放量的測定 第1部分：用室內法測定甲醛釋放量 |
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ENV 725-11-1993 |
先進技術陶瓷 陶瓷粉的試驗方法 第11部分：自然燒結物稠密度測定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of the densification on natural sintering |
| ENV 725-2-1994 |
先進技術陶瓷 陶瓷粉的試驗方法 第2部分：鈦酸鋇中雜質的測定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate |
| ENV 725-4-1994 |
先進技術陶瓷 陶瓷粉的試驗方法 第4部分：XRF分析法測定氮化鋁中氧的含量 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of the oxygen content in aluminium nitride by XRF analysis |
| ENV 737-6-2003 |
醫療氣體管道系統 第6部分：壓縮醫療氣體和真空用終端部件用探針的尺寸 |
Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| ENV 807-2001 |
木材防腐劑 抗軟腐爛微霉菌和其它土壤棲息微生物毒效的測定 |
Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms |
| ENV 820-3-1993 |
先進技術陶瓷 單片陶瓷 熱機械性能 第3部分：通過水淬火法對熱震動阻力的測定 |
Advanced technical ceramics - Monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
| ENV 820-4-2001 |
先進技術陶瓷 單片陶瓷 熱機械性能 第4部分：升溫時彎曲蠕變變形的測定 |
Advanced technical ceramics - Monolithic ceramics - Thermomechanical properties - Part 4: Determination of flexural creep deformation at elevated temperatures |
| ENV 821-3-1993 |
先進技術陶瓷 單片陶瓷 熱物理性能 第3部分：比熱的測定 |
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity |
| ENV 839-2002 |
木材防腐劑 抗木材破壞擔子菌類防治效能的測定 通過表面處理來應用 |
Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment |
| ENV 843-2-1995 |
先進技術陶瓷 單片陶瓷 室溫下的力學性能 第2部分：彈性模量的測定 |
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 2: Determination of elastic moduli |
| ENV 843-3-1996 |
先進技術陶瓷 單片陶瓷 室溫下的力學性能 第3部分：恒定壓力彎曲強度試驗中臨界裂縫增長系數的測定 |
Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| ENV 843-4-1994 |
先進技術陶瓷 單片陶瓷 室溫下的力學性能 第4部分：維氏、努氏和洛氏表面硬度試驗 |
Advanced technical ceramics - Monolitic ceramics - Mechanical properties at room temperature - Part 4: Vickers, Knoop and Rockwell Superficial hardness tests |
| ENV 843-5-1996 |
先進技術陶瓷 單片陶瓷 室溫下的力學性能 第5部分：統計分析 |
Advanced technical ceramics - Monolithic ceramics - Mechanical tests at room temperature - Part 5: Statistical analysis |
| ENV 852-2001 |
運輸人類用水的塑料管道系統 移動評估 源自移動值的實驗室說明指南 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values |
| ENV 926-2-1999 |
滑翔降落設備 滑翔傘 第2部分：要求和飛行試驗 |
Paragliding equipment - Paragliders - Part 2: Requirements and flight tests |
| ENV 927-2-2000 |
涂料和清漆 木材外部的涂覆材料和涂覆系統 第2部分：性能規范 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
| ENV 955-4-1997 |
耐熔產品的化學分析 第4部分：含有硅和/或鋁的產品（通過火焰原子吸收光譜法（FAAS）和誘導偶合等離子原子 |
Chemical analysis of refractory products - Part 4: Products containing silica and/or alumina (Analysis by Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic Emission Spectrography (ICP)) |
| ENV 993-11-1997 |
成形致密耐火制品 第11部分：抗熱沖擊的測定 |
Dense shaped refractory products - Part 11: Determination of resistance to thermal shock |
| ENV ISO 10722-1-1998 |
土工布及相關產品安裝過程中的模擬損害程序第1部分：粒狀材料的安裝 |
Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Part 1: Installation in granular materials (ISO 10722-1:1998) |
| ENV ISO 11079-1998 |
冷環境評價必備隔熱服裝(IREQ)的測定 |
Evaluation of cold environments - Determination of required clothing insulation (IREQ) (ISO/TR 11079:1993) |
| ENV ISO 11133-1-2000 |
食品和動物飼料的微生物學培養基制備和生產指南第1部分：實驗室培養基制備的質量保證通用指南 |
Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2000) |
| ENV ISO 13438-1999 |
土工布及相關產品抗氧化性測定用篩選試驗方法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/TR 13438:1999) |
| ENV ISO 13530-1998 |
水質水質分析的質量控制指南 |
Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
| ENV ISO 13843-2001 |
水質微生物法的有效使用指南 |
Water quality - Guidance on validation of microbiological methods (ISO/TR 13843:2000) |
| ENV ISO 14253-2-2001 |
產品幾何量技術規范(GPS)工作的測量檢驗和測量設備第2部分：GPS測量中不確定度評估指南和在產品檢驗中 |
Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1425 |
| ENV ISO 14815-2000 |
公路運輸和公路交通通信信息處理技術（RTTT） 自動車輛和設備識別系統規范 |
Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification (ISO/TR 14815:2000) |
| ENV ISO 14816-2000 |
公路運輸和公路交通通信信息處理技術（RTTT） 自動車輛和設備識別編碼和數據結構 |
Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures (ISO/TR 14816:2000) |
| ENV ISO 14819-3-2000 |
交通及旅客信息(TTI)經過交通電文編碼的 TTI 電文第3部分：ALERT-C的定位 |
Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 3: Location referencing for ALERT-C (ISO/TS 14819-3:2000) |
| ENV ISO 14825-1996 |
地理數據文件 |
Geographic data files (ISO 14825:1996) |
| ENV ISO 14904-2002 |
公路運輸和公路交通通信信息處理技術（RTTT）電子收費系統(EFC)操作員之間票據結算接口的規范 |
Road transport and traffic telematics - Electronic fee collection (EFC) - Interface specification for clearing between operators (ISO/TS 14904:2002) |
| ENV ISO 14906-1998 |
公路運輸和公路交通通信信息處理技術（RTTT）電子自動收費系統(EFC)短程通信應用接口定義 |
Road Transport and Traffic Telematics (RTTT) - Electronic Fee Collection (EFC) - Application interface definition for dedicated short range communications (ISO/TR 14906:1998) |
| ENV ISO 14907-1-2000 |
道路運輸與交通信息通訊業務電子收費系統操作員及固定設備的試驗方法第1部分：試驗方法的描述 |
Road Transport and Traffic Telematics (RTTT) - Electronic Fee Collection (EFC) - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TR 14907-1:2000) |
| ENV ISO 8502-1-1999 |
涂裝油漆和有關產品前鋼材預處理表面清潔度的評定試驗第1部分：可溶性鐵銹現場試驗 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991) |
| IEC 60034-8 Corrigendum 1-2004 |
旋轉電機.第8部分:線端標志和旋轉方向.修改件1 |
|
| IEC 60079-6Corrigendum 1-2003 |
爆炸性氣體環境用電氣設備.第6部分:油浸型“o“.技術勘誤1 |
(Electrical apparatus for explosive gas atmospheres - Part 6: Oil-immersion “o“; Corrigendum 1) |
| IEC 60079-7 Corrigendum 1-2004 |
爆炸性氣體環境用電氣設備.第7部分:增安型e.勘誤1 |
|
| IEC 60112Corrigendum 1-2003 |
固體絕緣材料的比較起痕指數和耐起痕指數的測定方法 |
(Method for the determination of the proof and the comparative tracking indices of solid insulating materials) |
| IEC 60112Corrigendum 2-2003 |
固體絕緣材料的比較起痕指數和耐起痕指數的測定方法 |
(Method for the determination of the proof and the comparative tracking indices of solid insulating materials; Corrigendum 2) |
| IEC 60269-4AMD 2Corrigendum 1-2003 |
低壓熔斷器.第4部分:半導體器件保護用熔斷體的補充要求.修改件2 |
(Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices; Amendment 2) |
| IEC 60335-2-15Corrigendum 1-2003 |
家用和類似用途電器的安全.第2-15部分:液體加熱器具的特殊要求.勘誤1 |
(Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids; Corrigendum 1) |
| IEC 60335-2-23 Corrigendum 1-2004 |
家用和類似用途電器的安全.第2-23部分:皮膚或毛發護理器具的特殊要求 |
|
| IEC 60335-2-23 Corrigendum 1-2004 |
家用和類似用途電器的安全.第2-23部分:皮膚或毛發護理器具的特殊要求 |
|
| IEC 60335-2-29 AMD 1 Corrigendum 1-2004 |
家用和類似用途電器.安全.第2-29部分:電池充電器的特殊要求.勘誤1 |
|
| IEC 60335-2-4 AMD 1 Corrigendum 1-2004 |
家用和類似用途電器的安全.第2-4部分:旋轉脫水機特殊要求.修改件1.勘誤1 |
|
| IEC 60335-2-4Corrigendum 1-2003 |
家用和類似用途電器.安全.第2-4部分:離心脫水機的特殊要求 |
(Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors) |
| IEC 60335-2-65 Corrigendum 1-2004 |
家用和類似用途電器的安全.第2-65部分:空氣凈化電器的特殊要求 |
|
| IEC 60335-2-65 Corrigendum 1-2004 |
家用和類似用途電器的安全.第2-65部分:空氣凈化電器的特殊要求 |
|
| IEC 60335-2-66 Corrigendum 1-2004 |
家用和類似用途電器的安全.第2-66部分:水床加熱器的特殊要求 |
|
| IEC 60335-2-84Corrigendum 1-2003 |
家用和類似用途電器的安全.第2-84部分:座便器的特殊要求 |
(Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets) |
| IEC 60335-2-92Corrigendum 1-2003 |
家用和類似用途電器的安全.第2-92部分:腳踏控制的市電操作的草坪松土機和松砂機的特殊要求 |
(Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators) |
| IEC 60335-2-96Corrigendum 1-2003 |
家用和類似用途電器.安全.第2-96部分:房間加熱用軟片狀加熱件的特殊要求.修改件1 |
(Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating) |
| IEC 60384-21 Corrigendum 1-2004 |
電子設備用固定電容器.第21部分:分規范:1級陶瓷介質的表面安裝固定多層電容器.勘誤1 |
|
| IEC 60384-21 Corrigendum 1-2004 |
電子設備用固定電容器.第21部分:分規范:1級陶瓷介質的表面安裝固定多層電容器.勘誤1 |
|
| IEC 60384-21 Corrigendum 1-2004 |
電子設備用固定電容器.第21部分:分規范:1級陶瓷介質的表面安裝固定多層電容器.勘誤1 |
|
| IEC 60384-21-1 Corrigendum 1-2004 |
電子設備用固定電容器.第21-1部分:空白詳細規范:1級陶瓷介質的表面安裝固定多層電容器.評定級別EZ.勘誤1 |
|
| IEC 60384-21-1 Corrigendum 1-2004 |
電子設備用固定電容器.第21-1部分:空白詳細規范:1級陶瓷介質的表面安裝固定多層電容器.評定級別EZ.勘誤1 |
|
| IEC 60384-21-1 Corrigendum 1-2004 |
電子設備用固定電容器.第21-1部分:空白詳細規范:1級陶瓷介質的表面安裝固定多層電容器.評定級別EZ.勘誤1 |
|
| IEC 60384-22 Corrigendum 1-2004 |
電子設備用固定電容器.第22部分:空白詳細規范:2級陶瓷介質的表面安裝固定多層電容器.勘誤1 |
|
| IEC 60384-22 Corrigendum 1-2004 |
電子設備用固定電容器.第22部分:空白詳細規范:2級陶瓷介質的表面安裝固定多層電容器.勘誤1 |
|
| IEC 60384-22 Corrigendum 1-2004 |
電子設備用固定電容器.第22部分:空白詳細規范:2級陶瓷介質的表面安裝固定多層電容器.勘誤1 |
|
| IEC 60384-22-1 Corrigendum 1-2004 |
電子設備用固定電容器.第22-1部分:空白詳細規范:2級陶瓷介質的表面安裝固定多層電容器.評定級別EZ.勘誤1 |
|
| IEC 60384-22-1 Corrigendum 1-2004 |
電子設備用固定電容器.第22-1部分:空白詳細規范:2級陶瓷介質的表面安裝固定多層電容器.評定級別EZ.勘誤1 |
|
| IEC 60384-22-1 Corrigendum 1-2004 |
電子設備用固定電容器.第22-1部分:空白詳細規范:2級陶瓷介質的表面安裝固定多層電容器.評定級別EZ.勘誤1 |
|
| IEC 60417-DB Corrigendum 1-2004 |
勘誤1.設備上用的圖形符號 |
|
| IEC 60439-1 AMD 1 Corrigendum 1-2004 |
低壓開關設備和控制設備組件.第1部分:已通過型式試驗和部分型式試驗的組件.勘誤1 |
|
| IEC 60456 Corrigendum 1-2005 |
家用洗衣機.測量性能的方法.勘誤1 |
|
| IEC 60512-23-3Corrigendum 1-2003 |
電子設備用電機件.基本試驗程序和測量方法.第23-3部分:試驗23c.連接器和附件的屏蔽效果 |
(Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories) |
| IEC 60529Edition 2.1Corrigendum 1-2003 |
外殼防護等級(IP代碼) |
(Degrees of protection provided by enclosures (IP code)) |
| IEC 60601-2-4 Corrigendum 1-2004 |
醫用電氣設備.第2-4部分:心臟除顫器安全的特殊要求.勘誤1 |
|
| IEC 60601-2-4 Corrigendum 1-2004 |
醫用電氣設備.第2-4部分:心臟除顫器安全的特殊要求.勘誤1 |
|
| IEC 60670-1Corrigendum 1-2003 |
家用和類似用途固定電氣設施附件外殼.第1部分:一般要求 |
(Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements) |
| IEC 60684-3-216Corrigendum 1-2003 |
絕緣軟管.第3部分:各種型號軟管規范.活頁216:熱縮、阻燃、耐火軟管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving) |
| IEC 60745-1AMD 1Corrigendum 1-2003 |
手持式電動工具.安全.第1部分:一般要求.修改件1 |
(Hand-held motor-operated electric tools - Safety - Part 1: General requirements; Amendment 1) |
| IEC 60745-1Corrigendum 1-2003 |
手持式電動工具的安全.第1部分:一般要求 |
(Hand-held motor-operated electric tools - Safety - Part 1: General requirements) |
| IEC 60746-2Corrigendum 1-2003 |
電化學分析器性能表示.第2部分:PH值 |
(Expression of performance of electrochemical analyzers - Part 2: pH- value) |
| IEC 60746-2Corrigendum 2-2003 |
電化學分析器性能表示.第2部分:pH值 |
(Expression of performance of electrochemical analyzers - Part 2: pH- value) |
| IEC 60746-3Corrigendum 1-2003 |
電化學分析器性能表示.第3部分:電解導電率 |
(Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity) |
| IEC 60749-10Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第10部分:機械沖擊 |
(Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock) |
| IEC 60749-11Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第11部分:溫度的急速變化.雙液電鍍槽法 |
(Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature; Two-fluid-bath method) |
| IEC 60749-11Corrigendum 2-2003 |
半導體器件.機械和氣候試驗方法.第11部分:溫度的急速變化.雙液電鍍槽法 |
(Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature; Two-fluid-bath method) |
| IEC 60749-12Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第12部分:振動、可變頻率 |
(Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency) |
| IEC 60749-13Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第13部分:鹽性環境 |
(Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere) |
| IEC 60749-1Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第1部分:總則 |
(Semiconductor devices - Mechanical and climatic test methods - Part 1: General) |
| IEC 60749-20Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第20部分:塑料封裝的SMDs抗?jié)駳夂秃附訜岬木C合影響 |
(Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat) |
| IEC 60749-22Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第22部分:粘接強度 |
(Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength) |
| IEC 60749-2Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第2部分:低氣壓 |
(Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure) |
| IEC 60749-31Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第31部分:塑料密封器件的易燃性(內部引起的) |
(Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced)) |
| IEC 60749-32Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第32部分:塑料密封器件的易燃性(外部引起的) |
(Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced)) |
| IEC 60749-3Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第3部分:外觀檢驗 |
(Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual examination) |
| IEC 60749-4Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第4部分:濕熱、穩態、高加速應力試驗 |
(Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST)) |
| IEC 60749-6Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第6部分:高溫下儲存 |
(Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature) |
| IEC 60749-7Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第7部分:其他殘余氣體的分析和內部含水量的測量 |
(Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases) |
| IEC 60749-8Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第8部分:密封 |
(Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing) |
| IEC 60749-8Corrigendum 2-2003 |
半導體器件.機械和氣候試驗方法.第8部分:密封 |
(Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing) |
| IEC 60749-9Corrigendum 1-2003 |
半導體器件.機械和氣候試驗方法.第9部分:標記的持久性 |
(Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking) |
| IEC 60874-19-1 Corrigendum 1-2004 |
光纖光纜連接器.第19-1部分:A1a、A1b類多模纖維端接SC-PC型(浮動雙總)跳線光纖連接器.詳細規范.勘誤1 |
|
| IEC 60895Corrigendum 1-2003 |
帶電作業.標稱交流電壓800KV及以下和直流電壓00kV時帶電作業用的導電衣著 |
(Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ?00 kV d.c.) |
| IEC 60903Corrigendum 1-2003 |
帶電作業.絕緣材料手套 |
(Live working - Gloves of insulating material) |
| IEC 60939-1 Corrigendum 1-2005 |
抑制電磁干擾用無源濾波裝置.第1部分:總規范.勘誤1 |
|
| IEC 60939-2 Corrigendum 1-2005 |
抑制電磁干擾用無源濾波裝置.第2部分:分規范.適用于安全試驗的無源濾波裝置.試驗方法和一般要求.勘誤1 |
|
| IEC 60947-7-1Corrigendum 1-2003 |
低壓開關設備和控制設備.第7-1部分:輔助設備.銅導線用接線板 |
(Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks for copper conductors) |
| IEC 60947-7-3Corrigendum 1-2003 |
低壓開關設備和控制設備.第7-3部分:輔助設備.熔斷器接線板的安全要求 |
(Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment; Safety requirements for fuse terminal blocks) |
| IEC 60950-21Corrigendum 1-2003 |
信息技術設備.安全.第21部分:遠程供電 |
(Information technology equipment - Safety - Part 21: Remote power feeding) |
| IEC 61000-4-7 Corrigendum 1-2004 |
勘誤1.電磁兼容性(EMC).第4-7部分:試驗和測量技術.供電系統及所連設備諧波和諧間波的測量和儀器儀表的通用指南 |
|
| IEC 61009-1Corrigendum 1-2003 |
家用和類似用途的有綜合過電流保護的剩余電流斷路器(RCBO).第1部分:總則 |
(Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com