標準號 |
中文名稱 |
英文名稱 |
| EN 50187-1996 |
大于1kV小于等于52kV額定電壓的交流開關和控制裝置用充氣室 |
Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| EN 50189-2000 |
架空導線鍍鋅鋼絲線 |
Conductors for overhead lines - Zinc coated steel wires |
| EN 50191-2000 |
電氣測試設備的安裝和操作 |
Erection and operation of electrical test equipment |
| EN 50193-1997 |
封閉式快速電水熱器性能測量方法 |
Closed electrical instantaneous water heaters - Methods for measuring performance |
| EN 50194-2000 |
探測房屋內易燃?xì)怏w的電氣裝置測試方法及性能要求 |
Electrical apparatus for the detection of combustible gases in domestic premises - Test methods and performance requirements |
| EN 50195-1996 |
已裝滿阿斯卡列電介液體的全封閉式電子設備的安全使用實施規程 |
Code of practice for the safe use of fully enclosed askarel-filled electrical equipment |
| EN 502-1999 |
金屬薄板材制成的屋頂產品 不銹鋼薄板材全支撐屋頂產品規范 |
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| EN 50200-2000 |
用于緊急線路的非保護型小電纜的耐火性試驗方法 |
Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| EN 50201-2001 |
DVB-IRD接口 |
Interfaces for DVB-IRD |
| EN 50205-2002 |
帶強制定向(機械鏈接)觸點的繼電器 |
Relais with forcibly guided (mechanically linked) contacts |
| EN 50206-1-1998 |
鐵路設備機車車輛架式受電弓：特性試驗第1部分：干線車輛用架式受電弓 |
Railway applications - Rolling stock - Pantographs: Characteristic tests - Part 1: Pantographs for main line vehicles |
| EN 50206-2-1999 |
鐵路設備機車車輛架式受電弓：特性試驗第2部分：地鐵和輕軌用架式受電弓 |
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Panthographs for metros and light rail vehicles |
| EN 50207-2000 |
鐵路應用機車車輛電子功率轉換器 |
Railway applications - Electronic power converters for rolling stock |
| EN 50209-1998 |
高壓機械用棒材和卷材的絕緣試驗 |
Test of insulation of bars and coils of high-voltage machines |
| EN 50212-1996 |
熱電傳感器用連接器 |
Connectors for thermoelectric sensors |
| EN 50214-1997 |
升降機用柔軟電纜 |
Flexible cables for lifts |
| EN 50215-1999 |
鐵路設備完工后和投入使用前機車車輛的試驗 |
Railway applications - Testing of rolling stock after completion of construction and before entry into service |
| EN 50216-1-2002 |
電源變壓器及電抗器配件第1部分：總則 |
Power transformer and reactor fittings - Part 1: General |
| EN 50216-2-2002 |
電源變壓器及電抗器配件第2部分：帶保油箱的充液式變壓器和電抗器的氣動和油動繼電器 |
Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator |
| EN 50216-4-2002 |
電源變壓器及電抗器配件第4部分：主要配件（接地端子、排放和填充裝置、溫度計套和輪子） |
Power transformer and reactor fittings - Part 4: Basic accessoiries (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) |
| EN 50216-6-2002 |
電源變壓器及電抗器配件第6部分：冷卻設備油漬變壓器的可移動的輻射器 |
Power transformer and reactor fittings - Part 6: Cooling equipment; Removable radiators for oil-immersed transformers |
| EN 50216-7-2002 |
電源變壓器及電抗器配件第7部分：變壓器油的電泵 |
Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil |
| EN 50221-1997 |
存取條件和其它數字電視廣播譯碼器用通用接口規范 |
Common interface specification for conditional access and other digital video broadcasting decoder applications |
| EN 50223-2001 |
用于易燃絨屑材料自動的靜電應用設備 |
Automatic electrostatic application equipment for flammable flock material |
| EN 50225-1996 |
可能被PCBs污染的全封閉式充油電氣設備的安全使用的實施規程 |
Code of practice for the safe use of fully enclosed oil-filled electrical equipment which may be contaminated with PCBs |
| EN 50229-2001 |
家用電動洗衣烘干機性能測試方法 |
Electric clothes washer-dryers for household use - Methods of measuring the performance |
| EN 50237-1997 |
用于電氣機械保護目的的手套和連指手套 |
Gloves and mitts with mechanical protection for electrical purposes |
| EN 50238-2003 |
鐵路應用機車車輛和火車探測系統的兼容性 |
Railway applications - Compatibility between rolling stock and train detection systems |
| EN 50239-1999 |
鐵路應用貨運用牽引車輛的無線電遙控系統 |
Railway applications - Radio remote control system of traction vehicle for freight traffic |
| EN 50241-1-1999 |
可燃或毒性氣體和蒸氣的檢測用開路儀器規范 第1部分：一般要求和試驗方法 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods |
| EN 50241-1/A1-2004 |
可燃或毒性氣體和蒸氣的檢測用開路儀器規范.第1部分:一般要求和試驗方法 |
|
| EN 50241-2-1999 |
可燃或毒性氣體和蒸氣的檢測用開路儀器規范 第2部分：可燃?xì)怏w檢測用儀器的性能要求 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2: Performance requirements for apparatus for the detection of combustible gases |
| EN 50243-2002 |
充液變壓器24kV和36kV以及5kA和8kV的室外套管 |
Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers |
| EN 50244-2000 |
家用易燃?xì)怏w探測用電氣設備選擇、安裝、使用和維修指南 |
Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance |
| EN 50248-2001 |
數字音頻廣播接收機的特性 |
Characteristics of DAB receivers |
| EN 50249-2002 |
地下管道和電纜的定位器性能與安全 |
Electromagnetic locators for buried pipes and cables - Performance and safety |
| EN 50250-2002 |
工業用轉換適配器 |
Conversion adapters for industrial use / Note: Includes Corrigendum of December 2002 (replaced Annex AA) |
| EN 50254-1998 |
小數據包用高效通信子系統 |
High efficiency communication subsystem for small data packages |
| EN 50256-1998 |
DVB接受器的特性 |
Characteristics of DVB receivers |
| EN 50260-2-7-2002 |
手持電池供電的電動工具及電池組的安全性第2-7部分：噴射槍的特殊要求 |
Safety of hand-held battery-powered motor-operated tools and battery packs - Part 2-7: Particular requirements for spray guns |
| EN 50261-1999 |
鐵路設備電氣設備規范 |
Railway applications - Mounting for electronic equipment |
| EN 50263-1999 |
電磁兼容性(EMC)量值繼電器和保護設備的產品標準 |
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
| EN 50264-1-2002 |
鐵路應用具有特殊放火性能的鐵路機車車輛電纜標準外壁第1部分：基本要求 |
Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements |
| EN 50264-2-2002 |
鐵路應用具有特殊放火性能的鐵路機車車輛電纜標準外壁第2部分：單芯電纜 |
Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables |
| EN 50264-3-2002 |
鐵路應用具有特殊放火性能的鐵路機車車輛電纜標準外壁第3部分：多芯電纜 |
Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables |
| EN 50265-1-1998 |
在著火條件下電纜的一般測試方法單個絕緣導體或電纜耐火焰垂直傳播試驗第1部分：裝置 |
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus |
| EN 50265-2-1-1998 |
在著火條件下電纜的一般測試方法單個絕緣導體或電纜耐火焰垂直傳播試驗第2-1部分：方法1kW預混火焰 |
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - 1 kW pre-mixed flame |
| EN 50265-2-2-1998 |
在著火條件下電纜的一般測試方法單個絕緣導體或電纜耐火焰垂直傳播試驗第2-2部分：方法擴散火焰 |
Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - Diffusion flame |
| EN 50266-1-2001 |
在著火條件下電纜的一般測試方法分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗第1部分：裝置 |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Apparatus |
| EN 50266-2-1-2001 |
在著火條件下電纜的一般測試方法分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗第2-1部分：程序A |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-2-2001 |
在著火條件下電纜的一般測試方法分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗第2-2部分：程序A |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-3-2001 |
在著火條件下電纜的一般測試方法分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗第2-3部分：程序B |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-4-2001 |
在著火條件下電纜的一般測試方法分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗第2-4部分：程序C |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-5-2001 |
在著火條件下電纜的一般測試方法分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗第2-5部分：程序D |
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D / Note: Includes Corrigendum of March 2002 |
| EN 50267-1-1998 |
在著火條件下電纜的一般測試方法電纜材料燃燒過程中放出氣體的試驗第1部分：裝置 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
| EN 50267-2-1-1998 |
在著火條件下電纜的一般測試方法電纜材料燃燒過程中放出氣體的試驗第2-1部分：程序氫鹵酸氣體量的測 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
| EN 50267-2-2-1998 |
在著火條件下電纜的一般測試方法電纜材料燃燒過程中放出氣體的試驗第2-2部分：程序通過測量 pH 值和 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| EN 50267-2-3-1998 |
在著火條件下電纜的一般測試方法電纜材料燃燒過程中放出氣體的試驗第2-3部分：程序通過測量 pH 值和 |
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and con |
| EN 50268-1-1999 |
在燃燒條件下電纜的一般試驗方法在規定條件下電纜燃燒煙密度測量第1部分：儀器 |
Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus |
| EN 50268-2-1999 |
在燃燒條件下電纜的一般試驗方法在規定條件下電纜燃燒煙密度測量第2部分：程序 |
Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure |
| EN 50270-1999 |
電磁兼容性探測和測量易燃?xì)怏w、有毒氣體或氧氣的電氣裝置 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 50271-2001 |
探測和測量易燃?xì)怏w、有毒氣體或氧氣的電氣裝置使用軟件和（或）數字技術裝置的要求和測試 |
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| EN 50272-2-2001 |
對次級蓄電池和安裝蓄電池的安全要求第2部分：固定蓄電池 |
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 50272-3-2002 |
對次級蓄電池和安裝蓄電池的安全要求第3部分：牽引蓄電池 |
Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
| EN 50274-2002 |
低壓開關和控制機構組件防電震防無意直接接觸帶電部分的保護 |
Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts |
| EN 50281-1-2-1998 |
用于可燃性塵埃存在時的電氣設備第1-2部分：用外殼保護的電氣設備選擇安裝和維護 |
Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures - Selection, installation and maintenance |
| EN 50281-2-1-1998 |
用于可燃性塵埃存在時的電氣設備第2-1部分：試驗方法塵埃最低著火溫度的測定方法 |
Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods of determining the minimum ignition temperature of dust |
| EN 50281-3-2002 |
用于有易燃性粉塵場所的設備第3部分：有或可能有易燃性粉塵地區的分類 |
Equipment for use in the presence of combustible dust - Part 3: Classification of areas where combustible dust are or may be present |
| EN 50284-1999 |
1G類II組儀器的電氣設備的結構測試和標志的特殊要求 |
Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G |
| EN 50285-1999 |
家用電子燈的能量效果測量方法 |
Energy efficiency of electric lamps for household use - Measurement methods |
| EN 50286-1999 |
低壓設施的電氣絕緣保護套 |
Electrical insulating protective clothing for low-voltage installations |
| EN 50288-1-2001 |
模擬和數字通信和管理中使用的多金屬電纜第1部分：通用規范 |
Multi-element metallic cables use in analogue and digital communication and control - Part 1: Generic specification |
| EN 50288-2-1-2001 |
模擬和數字通信和管理中使用的多金屬電纜第2-1部分：表征100 MHz以上的屏蔽電纜的部分規范水平及建筑 |
Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterized up to 100 MHz; Horizontal and building backbone cables |
| EN 50288-2-2-2001 |
電纜和數字通信和管理中用的多芯金屬電纜第2-2部分：特征頻率達100 MHz屏蔽電纜的部分規范工作區和中繼 |
Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables |
| EN 50288-3-1-2001 |
模擬和數字通信和管理中使用的多金屬電纜第3-1部分：表征100 MHz以上的未屏蔽電纜的部分規范水平及建 |
Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterized up to 100 MHz; Horizontal and building backbone cables |
| EN 50288-3-2-2001 |
模擬和數字通信和管理中使用的多金屬電纜第3-2部分：表征100 MHz以上的未屏蔽電纜的部分規范工作區和 |
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz; Work area and patch cord cables |
| EN 50288-4-1-2001 |
模擬和數字通信和管理中使用的多金屬電纜第4-1部分：表征600 MHz以上的屏蔽電纜的部分規范水平及建筑 |
Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz; Horizontal and building backbone cables |
| EN 50288-4-2-2001 |
模擬和數字通信和管理中使用的多金屬電纜第4-2部分：表征600 MHz以上的屏蔽電纜的部分規范工作區和局 |
Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterized up to 600 MHz; Work area and patch cord cables |
| EN 50289-1-1-2001 |
通信電纜試驗方法規范第1-1部分：電氣試驗方法基本要求 |
Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements |
| EN 50289-1-10-2001 |
通信電纜試驗方法規范第1-10部分：電氣試驗方法串音 |
Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk / Note: Applies only in conjunction with EN 50289-1-1 |
| EN 50289-1-11-2001 |
通信電纜試驗方法規范第1-11部分：電氣試驗方法特征阻抗輸入阻抗回波損耗 |
Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss / Note: Applies only in conjunction with EN 50289-1-1 |
| EN 50289-1-13-2004 |
通信電纜.試驗方法規范.第1-13部分:電氣試驗方法.接插線/同軸電纜配件/預連接電纜的耦合衰減或屏蔽衰減 |
|
| EN 50289-1-14-2004 |
通信電纜.試驗方法規范.第1-14部分:連接硬件的耦合衰減或屏蔽衰減 |
|
| EN 50289-1-15-2004 |
通信電纜.試驗方法規范.第1-15部分:電磁性能.鏈路和信道的耦合衰減(實驗室條件) |
|
| EN 50289-1-2-2001 |
通信電纜試驗方法規范第1-2部分：電氣試驗方法DC電阻 |
Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance |
| EN 50289-1-3-2001 |
通信電纜試驗方法規范第1-3部分：電氣試驗方法絕緣強度 |
Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength |
| EN 50289-1-4-2001 |
通信電纜試驗方法規范第1-4部分：電氣試驗方法絕緣電阻 |
Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-5-2001 |
通信電纜試驗方法規范第1-5部分：電氣試驗方法電容 |
Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-6-2002 |
通信電纜試驗方法規范第1-6部分：電氣試驗方法電磁性能 |
Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-7-2001 |
通信電纜試驗方法規范第1-7部分：電氣試驗方法傳播速度 |
Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-8-2001 |
通信電纜試驗方法規范第1-8部分：電氣試驗方法衰減 |
Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-9-2001 |
通信電纜試驗方法規范第1-9部分：電氣試驗方法衰減不平衡（縱向轉換損失、縱向轉換傳遞損失） |
Communications cables - Specifications for test methods - Part 1-9: Electrical test methods; Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
| EN 50289-3-1-2001 |
通信電纜試驗方法規范第3-1部分：機械試驗方法基本要求 |
Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements |
| EN 50289-3-11-2001 |
通信電纜試驗方法規范第3-11部分：機械試驗方法電纜耐切斷性 |
Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance |
| EN 50289-3-12-2001 |
通信電纜試驗方法規范第3-12部分：機械試驗方法強迫性損傷 |
Communication cables - Specifications for test methods - Part 3-12: Mechnical test methods; Shot gun damage |
| EN 50289-3-13-2003 |
通信電纜試驗方法的規范第3-13部分：機械試驗方法風蝕振動 |
Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods; Aeolian vibration / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-3-15-2003 |
通信電纜試驗方法規范第3-15部分：機械試驗方法水下電纜耐液壓／注意：和EN 50289-3-1聯合使用 |
Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-3-16-2001 |
通信電纜試驗方法規范第3-16部分：機械試驗方法電纜拉力性能 |
Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance |
| EN 50289-3-17-2002 |
通信電纜試驗方法規范第3-17部分：機械試驗方法絕緣材料和包皮的粘合力 |
Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-3-2-2001 |
通信電纜試驗方法規范第3-2部分：機械試驗方法導體的抗拉強度和延展性 |
Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor |
| EN 50289-3-4-2001 |
通信電纜試驗方法規范第3-4部分：機械試驗方法絕緣體和包層的抗拉強度延展性和收縮性 |
Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Tensile strength, elongation and shrinkage of insulation and sheath |
| EN 50289-3-5-2001 |
通信電纜試驗方法規范第3-5部分：機械試驗方法電纜的抗擠壓性 |
Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable |
| EN 50289-3-6-2001 |
通信電纜試驗方法規范第3-6部分：機械試驗方法電纜的抗沖擊性 |
Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable |
| EN 50289-3-7-2001 |
通信電纜試驗方法規范第3-7部分：機械試驗方法電纜包皮的耐腐蝕性 |
Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath |
| EN 50289-3-8-2001 |
通信電纜試驗方法規范第3-8部分：機械試驗方法電纜包皮標志的耐腐蝕性 |
Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings |
| EN 50289-3-9-2001 |
通信電纜試驗方法規范第3-9部分：機械試驗方法彎曲試驗 |
Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests |
| EN 50289-4-1-2001 |
通信電纜試驗方法規范第4-1部分：環境試驗方法基本要求 |
Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements |
| EN 50289-4-11-2002 |
通信電纜試驗方法規范第4-11部分：環境試驗方法匯集在水平方向上的耐火試驗 |
Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method |
| EN 50289-4-12-2004 |
通信電纜.試驗方法規范.第4-12部分:環境試驗方法.小型束狀電纜上的垂直火焰擴散試驗 |
|
| EN 50289-4-14-2003 |
通信電纜試驗方法的規范第3-14部分：環境試驗方法閃電 |
Communication cables - Specifications for test methods - Part 4-14: Environmental test methods; Lightning / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-4-2-2001 |
通信電纜試驗方法規范第4-2部分：環境試驗方法浸水 |
Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration |
| EN 50289-4-6-2001 |
通信電纜試驗方法規范第4-6部分：環境試驗方法溫度的周期性變化 |
Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling |
| EN 50289-4-9-2001 |
通信電纜試驗方法規范第4-9部分：環境試驗方法耐氣壓試驗 |
Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance |
| EN 50290-1-1-2001 |
通信電信第1-1部分：通用的設計原理及結構總則 |
Communication cables - Part 1-1: General |
| EN 50290-1-2-2004 |
通信電纜.第1-2部分:定義 |
|
| EN 50290-2-20-2001 |
通信電纜第2-20部分：通用的設計原理及結構總則 |
Communication cables - Part 2-20: Common design rules and construction; General |
| EN 50290-2-21-2001 |
通信電纜第2-21部分：通用的設計原理及結構PVC絕緣化合物 |
Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds |
| EN 50290-2-22-2001 |
通信電纜第2-22部分：通用的設計原則及結構PVC包皮化合物 |
Communication cables - Part 2-22: Common design rules and construction; PVC sheating compounds |
| EN 50290-2-23-2001 |
通信電纜第2-23部分：通用的設計原理及結構PE絕緣體 |
Communication cables - Part 2-23: Common design rules and construction; PE insulation |
| EN 50290-2-24-2002 |
通信電纜第2-24部分：通用的設計原理及結構PE包皮 |
Communication cables - Part 2-24: Common design rules and construction; PE sheathing / Note: Applies only in conjunction with EN 50290-2-20 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com