標準號 |
中文名稱 |
英文名稱 |
| EN 524-2-1997 |
預應力鋼筋束用鋼帶材護套 試驗方法 第2部分：撓性的測定 |
Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour |
| EN 524-3-1997 |
預應力鋼筋束用鋼帶材護套 試驗方法 第3部分：反復彎曲試驗 |
Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test |
| EN 524-4-1997 |
預應力鋼筋束用鋼帶材護套 試驗方法 第4部分：抗橫向負載力的測定 |
Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance |
| EN 524-5-1997 |
預應力鋼筋束用鋼帶材護套 試驗方法 第5部分：抗拉伸負載力的測定 |
Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance |
| EN 524-6-1997 |
預應力鋼筋束用鋼帶材護套 試驗方法 第6部分：密封性的測定(水流失的測定) |
Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss) |
| EN 525-1997 |
凈熱輸入值不超過300kW的空間加熱用非家用直接燃?xì)鈴?qiáng)制對流的空氣加熱器 |
Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 526-1993 |
內陸航行船舶 長度不超過8m的通道 要求、類型 |
Inland navigation vessels; gangways with a length not exceeding 8 m; requirements, types |
| EN 527-2-2002 |
辦公家具 工作臺和辦公桌 第2部分：機械安全要求 |
Office furniture - Work tables and desks - Part 2: Mechanical safety requirements |
| EN 527-3-2003 |
辦公家具 工作臺和辦公桌 第3部分：結構的穩定性和機械強度測定的試驗方法 |
Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure |
| EN 528-1996 |
軌道式存儲和卸取設備 安全 |
Rail dependent storage and retrieval equipment - Safety |
| EN 533-1997 |
防護服 防熱和防火 限制火焰蔓延用材料及材料組件 |
Protective clothing - Protection against heat and flame - Limited flame spread materials and material assemblies |
| EN 534-1998 |
瀝青瓦楞板 |
Corrugated bitumen sheets |
| EN 536-1999 |
筑路機械 瀝青攪拌設備 安全要求 |
Road construction machines - Asphalt mixing plants - Safety requirements |
| EN 538-1994 |
不連續鋪設用陶土屋面瓦 彎曲強度試驗 |
Clay roofing tiles for discontinuous laying - Flexural strength test |
| EN 539-1-1994 |
不連續鋪設用陶土屋面瓦 物理特性測定 第1部分：不滲透性試驗 |
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test |
| EN 539-2-1998 |
不連續鋪設用陶土層面瓦 物理特性測定 第2部分：抗霜凍試驗 |
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Tests for frost resistance |
| EN 54-1-1996 |
火災探測和火災警報系統 第1部分：介紹 |
Fire detection and fire alarm systems - Part 1: Introduction |
| EN 54-10-2002 |
火災探測和火災警報系統 第10部分：火焰探測器 點探測器 |
Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors |
| EN 54-11-2001 |
火災探測和火災警報系統 第11部分：人工呼叫點 |
Fire detection and fire alarm systems - Part 11: Manual call points |
| EN 54-12-2002 |
火災探測和火災警報系統 第12部分：煙霧探測器 使用光束的線探測器 |
Fire detection and fire alarm systems - Part 12: Smoke detectors; Line detectors using an optical light beam |
| EN 54-2/prA1-2001 |
火災探測和火災警報系統 第2部分：控制和指示設備 修改A1 |
Fire detection and fire alarm systems - Part 2: Control and indicating equipment; Amendment A1 |
| EN 54-3-2001 |
火災探測和火災警報系統 第3部分：火災警報設備 發聲器 |
Fire detection and fire alarm systems - Part 3: Fire alarm devices; Sounders |
| EN 54-5-2000 |
火災探測和火災警報系統 第5部分：熱探測器 點探測器 |
Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors |
| EN 54-7-2000 |
火災探測和火災警報系統 第7部分：煙霧探測器 使用散射光、透射光或電離的點探測器 |
Fire detection and fire alarm systems - Part 7: Smoke detectors; Point detectors using scattered light, transmitted light or ionization |
| EN 541-1995 |
鋁和鋁合金 輥壓罐頭、封閉塞和蓋子產品 規范 |
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 542-2003 |
粘結劑 密度測定 |
Adhesives - Determination of density |
| EN 543-2003 |
粘結劑 粉未和粒狀粘結劑表觀密度的測定 |
Adhesives - Determination of apparent density of powder and granule adhesives |
| EN 544-1998 |
用礦物和/或合成材料增強的瀝青屋頂板 |
Bitumen shingles with mineral and/or synthetic reinforcements |
| EN 545-2002 |
給水管道用球墨鑄鐵管、配件、附件及其接頭 要求和試驗方法 |
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 546-1-1996 |
鋁及鋁合金 箔 第1部分：檢驗和交貨的技術條件 |
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| EN 546-2-1996 |
鋁及鋁合金 箔 第2部分：機械性能 |
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
| EN 546-3-1996 |
鋁及鋁合金 箔 第3部分：尺寸公差 |
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
| EN 546-4-1997 |
鋁及鋁合金 箔 第4部分：特殊性能要求 |
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| EN 547-1-1996 |
機械安全 人體測量 第1部分：確定整個人體進入機械設備通道所需尺寸的原則 |
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 547-2-1996 |
機械安全 人體測量 第2部分：確定進入通道所需尺寸的原則 |
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| EN 547-3-1996 |
機械安全 人體測量 第3部分：人體測量數據 |
Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN 548-1997 |
彈性地面覆蓋物 普通和裝飾性油毯規范 |
Resilient floor coverings - Specification for plain and decorative linoleum |
| EN 549-1994 |
燃?xì)馄骶吆驮O(shè)備密封件和隔膜用橡膠材料 |
Rubber materials for seals and diaphragms for gas appliances and gas equipmemt |
| EN 550-1994 |
醫療器械的消毒 用環氧乙烷消毒的確認和常規控制 |
Sterilization of medical devices - Validation and routine control of ethylene oxide sterilization |
| EN 55011/prA3-1998 |
工業、科學、醫療（ISM）射頻設備電磁騷擾特性測量方法和限值修改prA3 |
Amendment 3 to CISPR 11 |
| EN 55011/prAA-2002 |
工業、科學、醫療（ISM）射頻設備電磁騷擾特性測量方法和限值修改prAA |
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 55011/prAB-2002 |
工業、科學、醫療（ISM）射頻設備電磁騷擾特性測量方法和限值修改prAB |
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 55011/prAC-2002 |
工業、科學、醫療（ISM）射頻設備電磁騷擾特性測量方法和限值修改prAC |
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 55012-2002 |
車輛、艇、內燃機驅動裝置無線電騷擾特性用于保護受騷擾對象（除安裝在本車輛/艇/裝置內或相鄰車輛/艇/ |
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/d |
| EN 55022/prAE-2001 |
通信端口的說明修改prAE |
Modification of CISPR 22: Clarification of telecommunication ports |
| EN 55022/prAF-2001 |
阻抗穩定網絡的定義修改prAC |
Modification of CISPR 22: Improved impedance stabilisation networks |
| EN 55022/prAG-2001 |
阻抗穩定網絡的改進修改prAD |
Modification of CISPR 22: Improved impedance stabilisation networks |
| EN 55024/prAD-2001 |
多功能設備的定義多功能設備的適用范圍修改prAD |
Modification of CISPR 24: Definition of multifunction equipment - Applicability of multifunction equipment |
| EN 55025-2003 |
車輛上、船上和設備上使用的接收機的無線電抗干擾特性限值和測量方法 |
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement (CISPR 25:2002) / Note: Endorsement notice |
| EN 55103-1-1996 |
電磁兼容性專用音頻、視頻、視聽和娛樂燈光控制裝置用產品類型標準第1部分：電磁輻射 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission |
| EN 55103-2-1996 |
電磁兼容性專用音頻、視頻、視聽和娛樂燈光控制裝置用產品類型標準第2部分：抗擾性 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| EN 554-1994 |
醫療器械的消毒 濕熱消毒的確認和常規控制 |
Sterilization of medical devices - Validation and routine control of sterilization by moist heat |
| EN 556-1-2001 |
醫療器械的消毒 標明為“消過毒”的醫療器械的要求 第1部分：定期消毒的醫療器械的要求 |
Sterilization of medical devices - Requirements for medical devices to be designated STERILE - Part 1: Requirements for terminally sterilized medical devices |
| EN 558-1-1995 |
工業閥門 法蘭管系統使用的金屬閥門面面間和中心與面間的尺寸 第1部分：PN標記的閥門 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves |
| EN 558-2-1995 |
工業閥門 法蘭管系統使用的金屬閥門面面間和中心與面間的尺寸 第2部分：級別標記的閥門 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves |
| EN 559-2003 |
氣焊設備 焊接、切割和同類處理用橡膠軟管 |
Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| EN 560-1994 |
氣焊設備 焊接、切割和同類處理用設備的軟管連接 |
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| EN 561-2002 |
氣焊設備 焊接、切割和同類處理用斷路閥門快速連接器 |
Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| EN 562-2003 |
氣焊設備 焊接、切割和同類處理用壓力計 |
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
| EN 564-1997 |
登山設備 輔助繩索 安全要求和試驗方法 |
Mountaineering equipment - Accessory cord - Safety requirements and test methods |
| EN 566-1997 |
登山設備 吊索 安全要求和試驗方法 |
Mountaineering equipment - Slings - Safety requirements and test methods |
| EN 567-1997 |
登山設備 繩夾 安全要求和試驗方法 |
Mountaineering equipment - Rope clamps - Safety requirements and test methods |
| EN 568-1997 |
登山設備 冰錨 安全要求和試驗方法 |
Mountaineering equipment - Ice anchors - Safety requirements and test methods |
| EN 569-1997 |
登山設備 巖釘 安全要求和試驗方法 |
Mountaineering equipment - Pitons - Safety requirements and test methods |
| EN 57-1984 |
石油產品 閃點測定 Abel-Pensky封閉檢測儀 |
Petroleum products; Determination of flash point; Abel-Pensky closed tester |
| EN 570-1994 |
鋁和鋁合金 來自于鍛制品的沖擊擠壓鋁塊 規范 |
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications |
| EN 571-1-1997 |
無損檢測 滲透檢測 第1部分：一般原則 |
Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 572-1-1994 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第1部分：定義和一般物理及機械性能 |
Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| EN 572-1-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第1部分:定義和一般物理及機械特性 |
|
| EN 572-2-1994 |
建筑用玻璃 基本鈉鈣硅玻璃制品 第2部分：浮法玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
| EN 572-2-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第2部分:浮法玻璃 |
|
| EN 572-3-1994 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第3部分：拋光嵌絲玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass |
| EN 572-3-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第3部分:拋光絡網玻璃 |
|
| EN 572-4-1994 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第4部分：拉制薄板玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass |
| EN 572-4-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第4部分:拉制平板玻璃 |
|
| EN 572-5-1994 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第5部分：壓花玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass |
| EN 572-5-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第5部分:壓花玻璃 |
|
| EN 572-6-1994 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第6部分：嵌絲壓花玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass |
| EN 572-6-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第6部分:嵌絲壓花玻璃 |
|
| EN 572-7-1994 |
建筑物用玻璃 基本鈉鈣硅酸鹽玻璃制品 第7部分：嵌絲或不嵌絲的溝槽形玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass |
| EN 572-7-2004 |
建筑用玻璃.基本鈉鈣玻璃制品.第7部分:嵌絲和不嵌絲的槽形玻璃 |
|
| EN 572-8-2004 |
建筑用玻璃.基本鈉鈣玻璃產品.第8部分:供貨和最終切割尺寸 |
|
| EN 572-9-2004 |
建筑用玻璃.基本鈉鈣玻璃產品.第9部分:合格性評定/產品標準 |
|
| EN 573-1-1994 |
鋁和鋁合金 鍛制產品化學成分和外形 第1部分：數字標記系統 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
| EN 573-2-1994 |
鋁和鋁合金 鍛制產品化學成分和外形 第2部分：基于標記系統的化學符號 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
| EN 573-3-2003 |
鋁和鋁合金 鍛制產品化學成分和外形 第3部分：化學成分 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition |
| EN 573-4-1994 |
鋁和鋁合金 鍛制產品化學成分和外形 第4部分：產品外形 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
| EN 573-4-2004 |
鋁和鋁合金.鍛制品的化學成分和形狀.第4部分:產品形狀 |
|
| EN 574-1996 |
機械安全 雙柄控制設備 功能狀況 設計原則 |
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN 575-1995 |
鋁和鋁合金 熔鑄生產的母合金 規范 |
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications |
| EN 576-1995 |
鋁和鋁合金 再熔非合金鋁錠 規范 |
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| EN 577-1995 |
鋁和鋁合金 液體金屬 規范 |
Aluminium and aluminium alloys - Liquid metal - Specifications |
| EN 578-1993 |
塑料管道系統 塑料管和配件 不透明度的測定 |
Plastics piping systems - Plastics pipes and fittings - Determination of the opacity |
| EN 579-1993 |
塑料管道系統 交聯聚乙烯(PE-X)管 溶劑萃取法測定交聯密度 |
Plastics piping systems - rosslinked polyethylene (PE-X) pipes -Determination of degree of crosslinking by solvent extraction |
| EN 58-2004 |
瀝青和瀝青粘合劑.瀝青粘合劑取樣 |
|
| EN 580-2003 |
塑料管道系統 未增塑聚氯乙烯(PVC-U)管 特定溫度下耐二氯甲烷試驗方法 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
| EN 581-1-1997 |
戶外家具 野營、家用和訂做的座椅和桌子 第1部分：一般安全要求 |
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements |
| EN 581-3-1999 |
戶外家具 野營、家用和訂做的座椅和桌子 第3部分：桌子的機械安全要求和試驗方法 |
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables |
| EN 582-1993 |
熱噴涂層 抗拉粘附強度的測定 |
Thermal spraying; determination of tensile adhesive strength |
| EN 583-1-1998 |
無損檢測 超聲波檢驗 第1部分：一般規則 |
Non-destructive testing - Ultrasonic examination - Part 1: General principles |
| EN 583-2-2001 |
無損檢測 超聲波檢驗 第2部分：靈敏度和有效范圍設定 |
Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting |
| EN 583-3-1997 |
無損檢測 超聲波檢驗 第3部分：傳導技術 |
Non destructive testing - Ultrasonic examination - Part 3: Transmission technique |
| EN 583-4-2002 |
無損檢測 超聲波檢驗 第4部分：與表面有間隔性垂直波的檢驗 |
Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface |
| EN 583-5-2000 |
無損檢測 超聲波檢驗 第5部分：間隔性波的特性和分級 |
Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities |
| EN 584-1-1994 |
無損檢測 工業用X射線照相膠片 第1部分：工業X射線照相用膠片體系的分類 |
Non destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography |
| EN 584-2-1996 |
無損檢測 工業用X射線照相膠片 第2部分：參考值法對膠片工藝的控制 |
Non-destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values |
| EN 586-1-1997 |
鋁和鋁合金 鍛件 第1部分：檢驗和交貨的技術條件 |
Aluminium and Alluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
| EN 586-2-1994 |
鋁和鋁合金 鍛件 第2部分：機械特性和附加特性要求 |
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN 586-3-2001 |
鋁和鋁合金 鍛件 第3部分：尺寸和形狀公差 |
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
| EN 588-1-1996 |
污水管和排水管用纖維水泥管 第1部分：重力系統用管道、管連接件和管配件 |
Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems |
| EN 588-2-2001 |
污水管和排水管用纖維水泥管 第2部分：檢修孔和檢查室 |
Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers |
| EN 589-2000 |
汽車燃料 LPG（液化石油氣） 要求和試驗方法 |
Automotive fuels - LPG - Requirements and test methods |
| EN 589-2004 |
機動車用燃料.液化石油氣(LPG).要求和試驗方法 |
|
| EN 59-1977 |
玻璃纖維增強塑料 用 Barcol壓痕方法測量硬度 |
Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor |
| EN 590-1999 |
汽車燃料 柴油 要求和試驗方法 |
Automotive fuels - Diesel - Requirements and test methods |
| EN 590-2004 |
機動車用燃料.柴油.要求和試驗方法 |
|
| EN 591-2001 |
專業人員用試管診斷儀器使用說明書 |
Instructions for use for in vitro diagnostic instruments for professional use |
| EN 592-2002 |
自測試用試管診斷儀器使用說明書 |
Instructions for use for in vitro diagnostic instruments for self-testing |
| EN 593-1998 |
工業閥門 金屬蝶閥 |
Industrial valves - Metallic butterfly valves |
| EN 593-2004 |
工業閥門.金屬蝶閥 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com