標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 6042-2000 |
造船.防風雨的單扇鋼門 |
Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998); German version EN ISO 6042:2000 |
| DIN EN ISO 61-2000 |
塑料.不能由專用漏斗注入的模壓材料表觀密度的測定 |
Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); German version EN ISO 61:1999 |
| DIN EN ISO 6103-2000 |
粘合的磨料制品.驗收試驗可允許的磨輪不平衡 |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing (ISO 6103:1999); German version EN ISO 6103:1999 |
| DIN EN ISO 6103-2005 |
粘合磨料產品.交貨時砂輪的可允許不平衡性.靜態試驗 |
|
| DIN EN ISO 613-2002 |
船舶和航海技術.磁羅盤、羅盤座和方位讀數裝置.B級 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B (ISO 613:2000); German version EN ISO 613:2001 |
| DIN EN ISO 6157-2-2004 |
緊固件.表面缺陷.第2部分:螺母 |
|
| DIN EN ISO 6158-2004 |
金屬涂層.工程用鉻電鍍層 |
|
| DIN EN ISO 6165-2002 |
土方機械.基本類型.詞匯 |
Earth-moving machinery - Basic types - Vocabulary (ISO 6165:2001); German version EN ISO 6165:2002 |
| DIN EN ISO 6179-2001 |
硫化或熱塑橡膠.橡膠薄板和橡膠涂層織物.揮發性液體滲透速度的測定(重力測定技術) |
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000 |
| DIN EN ISO 6185-1-2002 |
充氣艇.第1部分:發動機最大額定功率為4.5kW的動力艇 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001 |
| DIN EN ISO 6185-2-2002 |
充氣艇.第2部分:發動機最大額定功率為4.5kW到(并包括)15 kW的動力艇 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001 |
| DIN EN ISO 6185-3-2002 |
充氣艇.第2部分:發動機最大額定功率為15kW及更大的動力艇 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001 |
| DIN EN ISO 6186-1998 |
塑料.松散性測定 |
Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998 |
| DIN EN ISO 62-1999 |
塑料.吸水性的測定 |
Plastics - Determination of water absorption (ISO 62:1999); German version EN ISO 62:1999 |
| DIN EN ISO 6222-1999 |
水質.可培養微生物的計數.通過對營養瓊脂培養基培養的計群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999); German version EN ISO 6222:1999 |
| DIN EN ISO 6224-1997 |
一般目的用水時使用的帶織物加固內襯的橡膠軟管.規范 |
(Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997) |
| DIN EN ISO 6245-2003 |
石油產品.灰分的測定 |
(Petroleum products - Determination of ash (ISO 6245:2001); German version EN ISO 6245:2002) |
| DIN EN ISO 6246-1998 |
石油產品.易揮發和中等蒸餾燃料的蒸發殘?jiān)?頂吹法 |
(Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995); German version EN ISO 6246:1996) |
| DIN EN ISO 6251-1998 |
液化石油氣.對銅的腐蝕性.銅片試驗 |
(Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996); German version EN ISO 6251:1998) |
| DIN EN ISO 6252-1998 |
塑料.環境應力破裂(ESC)測定.持久應力試驗 |
(Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997) |
| DIN EN ISO 6259-1-2002 |
熱塑管.拉伸特性的測定.第1部分:通用試驗方法 |
(Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001) |
| DIN EN ISO 6270-1-2002 |
涂料和清漆.耐濕度的測定.第1部分:連續冷凝作用 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998); German version EN ISO 6270-1:2001 |
| DIN EN ISO 6272-1-2004 |
色漆和清漆.快速變形(耐沖擊)試驗.第1部分:大區域壓頭落錘試驗 |
|
| DIN EN ISO 6272-1994 |
色漆和清漆.落錘試驗 |
Paints and varnishes - Falling-weight test (ISO 6272:1993); German version EN ISO 6272:1994 |
| DIN EN ISO 6320-2000 |
動植物脂肪和油.折射指數的測定 |
Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000); German version EN ISO 6320:2000 |
| DIN EN ISO 6321-2002 |
動植物脂肪和油.開口毛細管中熔點(裂解點)測定 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002); German version EN ISO 6321:2002 |
| DIN EN ISO 6326-3-1998 |
天燃?xì)?硫化物的測定.第3部分:用電勢分析法對硫化氫,硫醇式硫和硫化羰式硫的測定 |
Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989); German version EN ISO 6326-3:1997 |
| DIN EN ISO 6326-5-1998 |
天燃?xì)?硫化物的測定.第5部分:林格聶爾(lingener)燃燒法 |
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989); German version EN ISO 6326-5:1997 |
| DIN EN ISO 6330-2001 |
紡織品.織物試驗的家庭洗滌和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000); German version EN ISO 6330:2000 |
| DIN EN ISO 6341-1996 |
水質.抑制大型Daphnia magna Straus(枝角目,甲殼綱)活動性的測定.劇毒試驗 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:1996); German version EN ISO 6341:1996 |
| DIN EN ISO 6346-1996 |
ISO集裝箱.編碼.識別和標記 |
Freight containers - Coding, identification and marking (ISO 6346:1995); German version EN ISO 6346:1995 |
| DIN EN ISO 6360-1-2004 |
牙醫學.旋轉器械的數字編碼系統.第1部分:一般特點 |
|
| DIN EN ISO 6360-2-2005 |
牙科學.旋轉器械用數字編碼體系.第2部分:形狀 |
|
| DIN EN ISO 6360-4-2004 |
牙科學.旋轉器械數字編碼體系.第4部分:金剛石器械的特性 |
|
| DIN EN ISO 6360-6-2004 |
牙科學.旋轉器械數字編碼體系.第6部分:磨削器械特性 |
|
| DIN EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的測定.第1部分:褲型撕裂法 |
|
| DIN EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的測定.第2部分:埃爾曼多法 |
|
| DIN EN ISO 6385-2004 |
工作系統設計的人類工效原則 |
|
| DIN EN ISO 6401-2005 |
塑料.氯乙烯均聚物和共聚物樹脂.剩余氯乙烯單體的測定.氣相色譜法 |
|
| DIN EN ISO 6402-1-2003 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和擠壓材料.第1部分:命名系統和規范基礎 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
| DIN EN ISO 6402-2-1999 |
塑料.耐沖擊丙烯腈/苯乙烯模制和擠壓材料(ASA,AES,ACS),丁二烯改型材料除外.第2部分:試驗試樣的制備和特性的測定 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 640 |
| DIN EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烴)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙烯(ACS)模塑和擠塑材料.第2部分:試樣制備和性能測定 |
|
| DIN EN ISO 6416-2005 |
水文測量.超聲波(聲波)法測量流量 |
|
| DIN EN ISO 642-2000 |
鋼.端頭淬硬性試驗(喬米尼(Jominy)試驗) |
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); German version EN ISO 642:1999 |
| DIN EN ISO 6427-1998 |
塑料.通過有機溶劑測定可萃取成份(標準法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998 |
| DIN EN ISO 643 Berichtigung 1-2004 |
DIN EN ISO 643-2003的勘誤 |
|
| DIN EN ISO 643-2003 |
鋼.表面粒度的縮微照相測定 |
(Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003) |
| DIN EN ISO 6468-1997 |
水質.選出的有機氯殺蟲劑,多氯聯苯和氯苯的測定.在液-液萃取后的氣相色譜法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996 |
| DIN EN ISO 6497-2005 |
動物飼料.抽樣 |
|
| DIN EN ISO 6497-2005 |
動物飼料.抽樣 |
|
| DIN EN ISO 6497-2005 |
動物飼料.抽樣 |
|
| DIN EN ISO 6506-1-1999 |
金屬材料.布氏硬度試驗.第1部分:試驗方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999); German version EN ISO 6506-1:1999 |
| DIN EN ISO 6506-2 Bb.1-1999 |
金屬材料.布氏硬度試驗.第2部分:硬度試驗機的校驗.依據驗證結果及為試驗機與沖頭設計所作修正 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the plunger |
| DIN EN ISO 6506-2-1999 |
金屬材料.布氏硬度試驗.第2部分:硬度試驗機械的校準與標定 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of hardness testing machines (ISO 6506-2:1999); German version EN ISO 6506-2:1999 |
| DIN EN ISO 6506-3 Bb.1-1999 |
金屬材料.布氏硬度試驗.第3部分:標準試塊校驗.標準試塊設計樣品 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks; example of design of reference blocks |
| DIN EN ISO 6506-3-1999 |
金屬材料.布氏硬度試驗.第3部分:標準試塊的校驗 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999); German version EN ISO 6506-3:1999 |
| DIN EN ISO 6507-1-1998 |
金屬材料.維氏硬度試驗.第1部分:試驗方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 |
| DIN EN ISO 6507-2 Bb.1-1998 |
金屬材料.維氏硬度檢驗.第2部分:試驗機械檢驗.檢驗和試驗機械結構的建議及打壓印章 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines; recommendations according to the verification and for the performance of the testing machine and the plunger |
| DIN EN ISO 6507-2-1998 |
金屬材料.維氏硬度試驗.第2部分:試驗機械的校準 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines (ISO 6507-2:1997); German version EN ISO 6507-2:1997 |
| DIN EN ISO 6507-3 Bb.1-1998 |
金屬材料.維氏硬度檢驗.第3部分:硬度對比板的校準.使用硬度對比板舉例 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6507-3-1998 |
金屬材料.維氏硬度試驗.第3部分:標準塊的校準 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks (ISO 6507-3:1997); German version EN ISO 6507-3:1997 |
| DIN EN ISO 6508-1 Berichtigung 1-2000 |
DIN EN ISO 6508-1的技術勘誤 |
Corrigendum to DIN EN ISO 6508-1:1999-10 |
| DIN EN ISO 6508-1-1999 |
金屬材料.洛氏硬度試驗(等級A、B、C、D、E、F、G、H、K、N、T).第1部分:試驗方法 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 1: Test method (ISO 6508-1:1999); German version EN ISO 6508-1:1999 |
| DIN EN ISO 6508-2 Bb.1-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).第2部分:硬度試驗機械的標定與校驗.根據標定及為試驗機械與沖頭所作推薦 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the p |
| DIN EN ISO 6508-2-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).第2部分:試驗機械的標定與校驗 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of testing machines (ISO 6508-2:1999); German version EN ISO 6508-2:1999 |
| DIN EN ISO 6508-3 Bb.1-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).第3部分:標準塊校驗.標準塊性能樣品 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6508-3-1999 |
金屬材料.洛氏硬度試驗(等級A,B,C,D,E,F,G,H,K,N,T).標準塊校驗 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks (ISO 6508-3:1999); German version EN ISO 6508-3:1999 |
| DIN EN ISO 6509-1995 |
金屬和合金的腐蝕.黃銅耐脫鋅性的測定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981); German version EN ISO 6509:1995 |
| DIN EN ISO 6520-1-1999 |
焊接及相關工藝.金屬材料中幾何的不均勻性分類.第1部分:熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998); Trilingual version EN ISO 6520-1:1998 |
| DIN EN ISO 6520-2-2002 |
焊接及相關工藝.金屬材料中幾何缺陷的分類.第2部分:壓焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001 |
| DIN EN ISO 6529-2003 |
防護服.化學試劑防護.防護服面料液體和氣體的滲透性測定 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001); German version EN ISO 6529:2001 |
| DIN EN ISO 6530-2005 |
防護服裝.對液態化學制品的防護.材料抗?jié)B透性的試驗方法 |
|
| DIN EN ISO 6530-2005 |
防護服裝.對液態化學制品的防護.材料抗?jié)B透性的試驗方法 |
|
| DIN EN ISO 6551-1996 |
石油液體和氣體.動態測量的正確可靠性.電脈沖數據和/或電子脈沖數據的電纜傳輸 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995 |
| DIN EN ISO 6570-2004 |
天然氣.烴液潛在含量的測定.重量分析法 |
|
| DIN EN ISO 6579-2003 |
食品和動物飼料的微生物學.測沙門氏菌用水平檢測法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp. (ISO 6579:2002); German version EN ISO 6579:2002 |
| DIN EN ISO 658-2002 |
油料種子.雜質含量的測定 |
Oilseeds - Determination of content of impurities (ISO 658:2002); German version EN ISO 658:2002 |
| DIN EN ISO 659-1998 |
油籽.油含量測定(參照法) |
Oilseeds - Determination of oil content (Referenz method) (ISO 659:1998); German version EN ISO 659:1998 |
| DIN EN ISO 660-1999 |
動植物脂肪和油.酸值和酸度的測定 |
Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:1996); German version EN ISO 660:1999 |
| DIN EN ISO 660-2005 |
動植物油脂.酸值和酸度的測定 |
|
| DIN EN ISO 6603-1-2000 |
塑料.硬質塑料耐沖擊性能的測定.第1部分:非儀器操作的沖擊試驗 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000 |
| DIN EN ISO 6603-2-2002 |
塑料.硬質塑料擊穿性能的測定.第2部分:儀器沖擊試驗 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 |
| DIN EN ISO 661-1995 |
動植物脂肪和油.試樣的制備 |
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:1989); German version EN ISO 661:1995 |
| DIN EN ISO 661-2005 |
動植物油脂.試樣的制備 |
|
| DIN EN ISO 662-2001 |
動物和植物油脂.水分和揮發物含量的測定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998); German version EN ISO 662:2000 |
| DIN EN ISO 663-2002 |
動植物脂肪和油.不可溶解雜質含量的測定 |
Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2000); German version EN ISO 663:2001 |
| DIN EN ISO 664-1995 |
油料種子.將小樣縮分為分析試樣 |
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:1990); German version EN ISO 664:1995 |
| DIN EN ISO 665-2001 |
油料種子.水和揮發物質含量的測定 |
Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000); German version EN ISO 665:2000 |
| DIN EN ISO 6682-1995 |
土方機械.控制裝置的最佳操作和活動范圍 |
Earth moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amendment 1:1989); German version EN ISO 6682:1995 |
| DIN EN ISO 6683-1999 |
土方機械.座椅安全帶和座椅安全帶固定件 |
Earth-moving machinery - Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990); German version EN ISO 6683:1999 |
| DIN EN ISO 6683-2005 |
土方機械.座椅安全帶和座椅安全帶固定器.性能要求和試驗 |
|
| DIN EN ISO 6708-1995 |
管件.DN(公稱寬度)的定義和選擇 |
(Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995); German version EN ISO 6708:1995) |
| DIN EN ISO 6721-1-2003 |
塑料.動態機械性能的測定.第1部分:一般原理 |
(Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2001); German version EN ISO 6721-1:2002) |
| DIN EN ISO 6721-2-1996 |
塑料.電動機械性能的測定.第2部分:扭擺法 |
(Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-2:1996) |
| DIN EN ISO 6721-3-1996 |
塑料.電動機械性能的測定.第3部分:彎曲振動.共振法 |
(Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration; resonance-curve (ISO 6721-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-3:1996) |
| DIN EN ISO 6743-4-2002 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.第4部分:H族(液壓系統) |
(Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001) |
| DIN EN ISO 6744-1-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第1部分:通用試驗方法 |
|
| DIN EN ISO 6744-2-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第2部分:鄰苯二甲酸酐含量的測定 |
|
| DIN EN ISO 6744-3-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第3部分:非皂化物含量的測定 |
|
| DIN EN ISO 6744-4-2004 |
色漆和清漆用粘合劑.醇酸樹脂.第4部分:脂肪酸含量的測定 |
|
| DIN EN ISO 6800-1998 |
動植物脂肪和油.甘油三酸脂分子的2位中脂肪酸的化學成份的測定 |
(Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules (ISO 6800:1997); German version EN ISO 6800:1997) |
| DIN EN ISO 6803-1997 |
橡膠和塑料軟管及軟管管道.無彎曲的液壓壓力脈沖試驗 |
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 |
| DIN EN ISO 6806-1996 |
用于油燃燒器的軟管和軟管組件.規范 |
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995 |
| DIN EN ISO 6807-2004 |
旋轉式鉆探和振動用橡膠軟管和軟管組件.規范 |
|
| DIN EN ISO 6808-2000 |
石油液態產品的抽吸和低壓排放用塑料軟管及軟管組件.規范 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 |
| DIN EN ISO 6817-1995 |
封閉管道中導電液體流量測量.電磁流率計測量法 |
Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995 |
| DIN EN ISO 683-17-2000 |
熱處理鋼、合金鋼和易切削鋼.第17部分:球軸承和滾動軸承鋼 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); German version EN ISO 683-17:1999 |
| DIN EN ISO 6845-2003 |
表面活性劑.工業鏈烷磺酸鹽.鏈烷單磺酸鹽平均相對分子量和鏈烷單磺酸鹽含量的測定 |
(Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003) |
| DIN EN ISO 6847-2002 |
焊接消耗品.化學分析用焊接金屬塊的沉積 |
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000); German version EN ISO 6847:2001 |
| DIN EN ISO 6860-1995 |
色漆和清漆.彎曲試驗(錐體心軸) |
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984); German version EN ISO 6860:1995 |
| DIN EN ISO 6865-2001 |
動物飼料.粗纖維含量的測定.中間過濾法 |
Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000); German version EN ISO 6865:2000 |
| DIN EN ISO 6867-2001 |
動物飼料.維生素E含量的測定.使用高性能液相色譜法 |
Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography (ISO 6867:2000); German version EN ISO 6867:2000 |
| DIN EN ISO 6869-2001 |
動物飼料.鈣,銅,鐵,鎂,鉀,錳和鈉,鋅含量的測定.原子吸收光譜法 |
Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000); German version EN ISO 6869:2000 |
| DIN EN ISO 6871-1 Berichtigung 1-2000 |
對DIN EN ISO 6871-1:1996-12的勘誤 |
Corrigenda to DIN EN ISO 6871-1:1996-12 |
| DIN EN ISO 6871-1-1996 |
牙科基本金屬鑄造合金.第1部分:鈷基合金 |
Dental base metal casting alloys - Part 1: Cobalt-based alloys (ISO 6871-1:1994); German version EN ISO 6871-1:1996 |
| DIN EN ISO 6871-2-1996 |
牙科基本金屬鑄造合金.第2部分:鎳基合金 |
Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994); German version EN ISO 6871-2:1996 |
| DIN EN ISO 6872-1999 |
牙科烤瓷 |
Dental ceramic (ISO 6872:1995 including Amendment 1:1997): German version EN ISO 6872:1998 |
| DIN EN ISO 6873-2000 |
牙科用石膏制品 |
Dental gypsum products (ISO 6873:1998); German version EN ISO 6873:2000 |
| DIN EN ISO 6874-2005 |
牙科學.樹脂基窩溝和裂紋封閉劑 |
|
| DIN EN ISO 6875-1996 |
牙科設備.牙科病人用椅 |
Dental equipment - Dental patient chair (ISO 6875:1995); German version EN ISO 6875:1996 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com