標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 10882-2-2001 |
焊接及相關工藝中的健康和安全.工作人員工作區氣載粒子和氣體的取樣.第2部分:氣體取樣 |
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator`s breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000) |
| DIN EN ISO 10938-1998 |
眼科儀器.圖表放映機 |
(Ophthalmic instruments - Chart projectors (ISO 10938:1998); German version EN ISO 10938:1998) |
| DIN EN ISO 10939-1998 |
眼科設備.顯微裂隙燈 |
(Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:1998); German version EN ISO 10939:1998) |
| DIN EN ISO 10940-1998 |
眼科器械.眼底照相機 |
(Ophthalmic instruments - Fundus cameras (ISO 10940:1998); German version EN ISO 10940:1998) |
| DIN EN ISO 10942 Berichtigung 1-1998 |
對DINENISO10942:1998-06的校正 |
(Corrigenda to DIN EN ISO 10942:1998-06 (EN ISO 10942:1998/AC:1998)) |
| DIN EN ISO 10942-1998 |
眼科器械.眼底鏡直接檢查 |
(Ophthalmic instruments - Direct ophthalmoscopes (ISO 10942:1998); German version EN ISO 10942:1998) |
| DIN EN ISO 10943-1998 |
眼科器械.眼底鏡間接檢查 |
(Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:1998); German version EN ISO 10943:1998) |
| DIN EN ISO 10944-1998 |
眼科器械.同視鏡 |
(Ophthalmic instruments - Synoptophores (ISO 10944:1998); German version EN ISO 10944:1998) |
| DIN EN ISO 10960-1996 |
橡膠和塑料軟管.在動力條件下耐臭氧性的評定 |
(Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994); German version EN ISO 10960:1996) |
| DIN EN ISO 10964-1997 |
粘合劑.螺紋緊固件上厭氧粘合劑的抗扭強度的測定 |
(Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993); German version EN ISO 10964:1997) |
| DIN EN ISO 10993-1 Berichtigung 1-1999 |
對DINENISO10993-1:1998-06的校正 |
(Corrigenda to DIN EN ISO 10993-1:1998-06) |
| DIN EN ISO 10993-1-1998 |
醫療器械的生物評定.第1部分:評定和試驗 |
(Biological evaluation of medical devices - Part 1: Evaluation and testing (ISO 10993-1:1997); German version EN ISO 10993-1:1997) |
| DIN EN ISO 10993-10-2003 |
醫療器械的生物評定.第10部分:刺激與延遲式超靈敏性試驗 |
(Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity (ISO 10993-10:2002); German version EN ISO 10993-10:2002) |
| DIN EN ISO 10993-11-1995 |
醫療裝置生物學評定.第11部分:系統毒性試驗 |
(Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:1993); German version EN ISO 10993-11:1995) |
| DIN EN ISO 10993-12-1996 |
醫療器械的生物評定.第12部分:樣品制備和參考材料 |
(Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:1996); German version EN ISO 10993-12:1996) |
| DIN EN ISO 10993-13-1999 |
醫學化合物的生物評定.第13部分:聚合醫學化合物中降解物的質量和數量驗證 |
(Biological evaluation of medical devices - Part 13: Identification and and quantification of degradation products from polymeric medical devices (ISO 10993-13:1998); German version EN ISO 10993-13:1998) |
| DIN EN ISO 10993-14-2002 |
醫療器械的生物評定.第14部分:陶瓷降解產品的識別與量化 |
(Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001); German version EN ISO 10993-14:2001) |
| DIN EN ISO 10993-15-2001 |
醫療器械的生物評定.第15部分:金屬及合金中降解產物的識別與量化 |
(Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000); German version EN ISO 10993-15:2000) |
| DIN EN ISO 10993-16-1997 |
醫療器械的生物評定.第12部分:對退化產品和可濾清物的毒理動力學研究的方案和計算 |
(Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997); German version EN ISO 10993-16:1997) |
| DIN EN ISO 10993-17-2003 |
醫療器械的生物評定.第17部分:可浸出物質容許限值的確定 |
(Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002); German version EN ISO 10993-17:2002) |
| DIN EN ISO 10993-18-2005 |
醫療裝置的生物評價.第18部分:材料的化學表征 |
|
| DIN EN ISO 10993-2-1998 |
醫療器械的生物評定.第2部分:動物保護的要求 |
(Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:1992); German version EN ISO 10993-2:1998) |
| DIN EN ISO 10993-3-2004 |
醫療器械的生物學評價.第3部分:遺傳毒性、致癌性和生殖毒性的試驗 |
(Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2003); German version EN ISO 10993-3:2003) |
| DIN EN ISO 10993-3-2004 |
醫療器械的生物學評價.第3部分:遺傳毒性、致癌性和生殖毒性的試驗 |
|
| DIN EN ISO 10993-4-2003 |
醫療器械的生物評定.第4部分:與血液相互作用的選擇試驗 |
(Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002); German version EN ISO 10993-4:2002) |
| DIN EN ISO 10993-5-1999 |
醫療器械的生物評定.第5部分:細胞毒性試驗:試管內方法 |
(Biological evaluation of medical devices - Part 5: Tests for cytotoxicity: in vitro-methods (ISO 10993-5:1999); German version EN ISO 10993-5:1999) |
| DIN EN ISO 10993-7-1995 |
醫學產品的生物評定.第7部分:環氧乙烷的滅菌殘渣 |
(Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:1995); German version EN ISO 10993-7:1995) |
| DIN EN ISO 10993-8-2001 |
醫療裝置的生物評價.第8部分:生物試驗用標準物質的選擇和合格鑒定 |
(Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests (ISO 10993-8:2000); German version EN ISO 10993-8:2000) |
| DIN EN ISO 10993-9-1999 |
醫療裝置生物評定.第9部分:用于勢降解產物識別與評定的結構 |
(Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:1999); German version EN ISO 10993-9:1999) |
| DIN EN ISO 11058-1999 |
土工織物和土工織物相關產品.對平面,無負載,一般的水滲透性測定 |
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999); German version EN ISO 11058:1999 |
| DIN EN ISO 11064-1-2001 |
控制中心的人類工效學設計.第1部分:控制中心的設計原則 |
(Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000), German version EN ISO 11064-1:2000) |
| DIN EN ISO 11064-2-2001 |
控制中心的人類工效學設計.第2部分:控制室的布置原則 |
(Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000); German version EN ISO 11064-2:2000) |
| DIN EN ISO 11064-3 Berichtigung 1-2003 |
DINENISO11064-3的技術勘誤 |
(Corrigenda to DIN EN ISO 11064-3:2000-09 (EN ISO 11064-3:1999/AC:2002)) |
| DIN EN ISO 11064-3-2000 |
控制中心的人類工效設計.第3部分:控制室布置 |
(Ergonomic design of control centres - Part 3: Control room layout (ISO 11064-3:1999); German version EN ISO 11064-3:1999) |
| DIN EN ISO 11064-4-2004 |
控制中心的人類工效學設計.第4部分:工作站的布置和尺寸 |
|
| DIN EN ISO 11064-6-2005 |
控制中心人類工效學設計.第6部分:控制中心環境要求 |
|
| DIN EN ISO 1107-2003 |
漁網.網片.基本術語和定義 |
(Fishing nets - Netting - Basic terms and definitions (ISO 1107:2003); German version EN ISO 1107:2003) |
| DIN EN ISO 11070-1999 |
一次性無菌管內導管導引器 |
(Sterile single-use intravascular catheter introducers (ISO 11070:1998); German version EN ISO 11070:1999) |
| DIN EN ISO 11091-1999 |
建筑制圖.園林設計制圖實用規程 |
(Construction drawings - Landscape drawing practice (ISO 11091:1994); German version EN ISO 11091:1999) |
| DIN EN ISO 1110-1998 |
塑料.聚酰胺.試樣的加速預處理 |
(Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995); German version EN ISO 1110:1997) |
| DIN EN ISO 11102-1-1997 |
內燃機.手柄起動裝置.第1部分:安全技術要求和檢驗 |
(Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997); German version EN ISO 11102-1:1997) |
| DIN EN ISO 11102-2-1997 |
內燃機.手柄起動裝置.第2部分:測量脫扣距離和角度的方法 |
(Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997); German version EN ISO 11102-2:1997) |
| DIN EN ISO 11105-1997 |
小型船舶.裝有強制點火發動機和/式油罐的房屋通風 |
(Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997); German version EN ISO 11105:1997) |
| DIN EN ISO 11111-1-2005 |
紡織機械.安全要求.第1部分:通用要求 |
|
| DIN EN ISO 11111-2-2005 |
紡織機械.安全要求.第2部分:紡紗預備和紡紗機械 |
|
| DIN EN ISO 11111-3-2005 |
紡織機械.安全要求.第3部分:無紡機械 |
|
| DIN EN ISO 11111-4-2005 |
紡織機械.安全要求.第4部分:紗線加工和繩索制造機械 |
|
| DIN EN ISO 11111-5-2005 |
紡織機械.安全要求.第5部分:織造和針織用預備機械 |
|
| DIN EN ISO 11111-6-2005 |
紡織機械.安全要求.第6部分:織物織造機械 |
|
| DIN EN ISO 11111-7-2005 |
紡織機械.安全要求.第7部分:染色和精整機械 |
|
| DIN EN ISO 11114-1-1998 |
可運輸氣瓶.裝有氣體的氣瓶及其閥門材料的可互換性.第1部分:金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997)(includes corrigendum AC:1998); German version EN ISO 11114-1:1997) |
| DIN EN ISO 11114-2-2001 |
可運輸氣瓶.裝有氣體的氣瓶及其閥門材料的可互換性.第2部分:非金屬材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000) |
| DIN EN ISO 11114-3-1998 |
可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.第3部分:有氧環境中自燃試驗 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997)(including corrigendum AC:1998); German version EN ISO 11114-3:1997 + AC:1998) |
| DIN EN ISO 11114-4-2005 |
移動氣瓶.氣瓶和瓶閥材料與盛裝氣體的相容性.第4部分:選擇耐氫脆的金屬材料的試驗方法 |
|
| DIN EN ISO 11116-1-2000 |
移動式氣瓶.氣瓶.閥門與氣體瓶連接用17E錐型螺紋.第1部分:規范 |
(Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999); German version EN ISO 11116-1:1999) |
| DIN EN ISO 11116-2-1999 |
可移動的氣罐.煤氣罐.閥門與氣罐連接的17E錐型螺紋.第1部分:檢驗量規 |
(Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999); German version EN ISO 11116-2:1999) |
| DIN EN ISO 11120-1999 |
可移動的煤氣瓶.儲氣容積在150立升至3000立升之間的密封煤氣運輸用無縫可重新填裝的大型鋼瓶.設計,結構和檢 |
(Gas cylinders - Refillable seamless steel tubes water capacity between 150 l and 3000 l - Designconstruction and testing (ISO 11120:1999); German version EN ISO 11120:1999) |
| DIN EN ISO 11124-1-1997 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第1部分:一般介紹和分類 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993); German version EN ISO 11124-1:1997) |
| DIN EN ISO 11124-2-1997 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第2部分:冷硬鑄鐵砂粒 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993); German version EN ISO 11124-2:1997) |
| DIN EN ISO 11124-3-1997 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第3部分:高碳鑄鋼噴丸及砂粒 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993); German version EN ISO 11124-3:1997) |
| DIN EN ISO 11124-4-1997 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第4部分:低碳鑄鋼噴丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993); German version EN ISO 11124-4:1997) |
| DIN EN ISO 11125-1-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第1部分:取樣 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997) |
| DIN EN ISO 11125-2-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第2部分:粒度分布的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997) |
| DIN EN ISO 11125-3-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第3部分:硬度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997) |
| DIN EN ISO 11125-4-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第4部分:表觀密度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997) |
| DIN EN ISO 11125-5-1997 |
涂料和相關產品應用前鋼襯底的制備.金屬噴沙清理磨料的試驗方法.第1部分:有缺陷的顆粒和微結構的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN I |
| DIN EN ISO 11125-6-1997 |
涂料和相關產品應用前鋼襯底的制備.金屬噴沙清理磨料的試驗方法.第1部分:外來雜質的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997) |
| DIN EN ISO 11125-7-1997 |
涂層材料涂層前鋼表面的預處理.金屬噴丸的檢驗方法.第7部分:濕度測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997) |
| DIN EN ISO 11126-1-1997 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第1部分:一般介紹和分類 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2: |
| DIN EN ISO 11126-3-1997 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第3部分:煉銅熔渣制噴丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993); German version EN ISO 11126-3:1997) |
| DIN EN ISO 11126-4-1998 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第4部分:熔渣制鋼丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993); German version EN ISO 11126-4:1998) |
| DIN EN ISO 11126-5-1998 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第5部分:煉鎳熔渣制噴丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993); German version EN ISO 11126-5:1998) |
| DIN EN ISO 11126-6-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第6部分:鐵爐熔渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997) |
| DIN EN ISO 11126-7-1999 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第7部分:熔氧化鋁 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999) |
| DIN EN ISO 11126-8-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第8部分:橄欖石沙 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997) |
| DIN EN ISO 11127-1-1997 |
涂料和相關產品應用之前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第1部分:抽樣 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993); German version EN ISO 11127-1:1997) |
| DIN EN ISO 11127-2-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第2部分:粒度分布的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997) |
| DIN EN ISO 11127-3-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第3部分:表觀密度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997) |
| DIN EN ISO 11127-4-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第4部分:通過玻璃劃痕試驗對硬度的評估 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997) |
| DIN EN ISO 11127-5-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第5部分:潮濕度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997) |
| DIN EN ISO 11127-6-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第6部分:通過電導率測量對水溶污染的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German versio |
| DIN EN ISO 11127-7-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第7部分:對水溶氯化物的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997) |
| DIN EN ISO 11130-1999 |
金屬與合金的腐蝕性.鹽溶液中反復腐蝕試驗 |
(Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999); German version EN ISO 11130:1999) |
| DIN EN ISO 11143-2002 |
牙科設備.汞齊合金分離器 |
(Dental equipment - Amalgam separators (ISO 11143:1999 + Cor.1:2002) (includes corrigendum AC:2002); German version EN ISO 11143:1999 + AC:2002) |
| DIN EN ISO 11144-1996 |
牙科設備.給排水管接頭 |
(Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996) |
| DIN EN ISO 11145-2002 |
光學和光學儀器.激光和有關的激光設備.詞匯和符號 |
(Optics and optical instruments - Laser and laser-related equipment - Vocabulary and symbols (ISO 11145:2001); German version EN ISO 11145:2001) |
| DIN EN ISO 11146-1999 |
激光和激光相關設備.激光束參數的試驗方法.射線測量,離向角和射線傳播系數 |
(Lasers and laser related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999); German version EN ISO 11146:1999) |
| DIN EN ISO 11146-2-2005 |
激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第2部分:一般象散束 |
|
| DIN EN ISO 11146-2-2005 |
激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第2部分:一般象散束 |
|
| DIN EN ISO 11149-1997 |
光學和光學儀器.激光和激光相關設備.非電信激光應用的光纖接頭 |
(Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser application (ISO 11149:1997); German version EN ISO 11149:1997) |
| DIN EN ISO 11151-1-2000 |
激光和激光相關設備.標準光學件.第1部分:紫外線、可見光和近紅外線光譜范圍內件 |
(Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000) |
| DIN EN ISO 11151-2-2000 |
激光和激光相關設備.標準光學件.第2部分:紅外線光譜范圍內件 |
(Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000) |
| DIN EN ISO 1119-2003 |
產品幾何量技術規范(GPS).錐度和錐度角系列 |
(Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998); German version EN ISO 1119:2002) |
| DIN EN ISO 11196-1997 |
麻醉氣體用監測器 |
(Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997); German version EN ISO 11196:1997) |
| DIN EN ISO 11197-2005 |
醫療供電設備 |
|
| DIN EN ISO 11199-1-2000 |
雙臂操作的助步器.要求和試驗方法.第1部分:步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999); German version EN ISO 11199-1:1999) |
| DIN EN ISO 11199-2-2000 |
雙臂操作的助步器.要求和試驗方法.第2部分:滾動器 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999); German version EN ISO 11199-2:1999) |
| DIN EN ISO 11199-2-2005 |
雙臂操作的助步器.要求和試驗方法.第2部分:滾動器 |
|
| DIN EN ISO 1120-2002 |
傳送帶.機械緊固件強度測定.靜態試驗方法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002); German version EN ISO 1120:2002) |
| DIN EN ISO 11200-1996 |
聲學.機械和設備發出的噪聲.在工作站和其他特定位置發射聲壓級測定基本標準導則 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995); German version EN ISO 11200:1995 |
| DIN EN ISO 11201-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所輻射聲壓級的測量.反射平面上基本自由聲區用2級精度 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; engineering method in an essentially free field over a reflecting plane (ISO 11201:1995); German vers |
| DIN EN ISO 11202-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所輻射聲壓級的測量.在使用條件下測量的3級精度方法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; survey method in situ (ISO 11202:1995); German version EN ISO 11202:1995) |
| DIN EN ISO 11203-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它聲功率級試驗場所的輻射聲壓級測量 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:1995) |
| DIN EN ISO 11204-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所的輻射聲壓級測量.環境改善法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; method requiring environmental corrections (ISO 11204:1995); German version EN ISO 11204:1995) |
| DIN EN ISO 11205-2004 |
聲學.機械和設備發出的噪音.使用聲強現場測定工作位和其它特殊位置的聲壓級別的工程方法 |
|
| DIN EN ISO 11210-1995 |
鉑裝飾合金中鉑量測定.用六氯鉑酸二銨沉淀作重力測定 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:1995); German version EN ISO 11210:1995) |
| DIN EN ISO 11212-1-1997 |
淀粉和淀粉制品.重金屬含量.第1部分:用原子吸收光譜法測定砷含量 |
(Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997); German version EN ISO 11212-1:1997) |
| DIN EN ISO 11212-2-1997 |
淀粉和淀粉制品.重金屬含量.第2部分:用原子吸收光譜法測定汞含量 |
(Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997); German version EN ISO 11212-2:1997) |
| DIN EN ISO 11212-3-1997 |
淀粉和淀粉制品.重金屬含量.第3部分:用帶電熱原子分裂的原子吸收光譜法測定鉛含量 |
(Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997); German version EN ISO 11212-3:1997) |
| DIN EN ISO 11212-4-1997 |
淀粉和淀粉制品.重金屬含量.第4部分:用帶電熱原子分裂的原子吸收光譜法測定鎘含量 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997); German version EN ISO 11212-4:1997) |
| DIN EN ISO 11213-1995 |
淀粉和淀粉制品的檢驗.用酶催化法測定淀粉的乙�；暮� |
(Modified starch - Determination of acetyl content - Enzymatic method (IS0 11213:1995); German version EN ISO 11213:1995) |
| DIN EN ISO 11214-1996 |
改進的淀粉.氧化淀粉中羥基團含量的測定 |
(Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996); German version EN ISO 11214:1996) |
| DIN EN ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的測定.氣相色譜法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (ISO 11215:1998); German version EN ISO 11215:1998) |
| DIN EN ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基團含量的測定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998); German version EN ISO 11216:1998) |
| DIN EN ISO 11244-1999 |
牙科用釬焊包埋料 |
(Dental brazing investments (ISO 11244:1998); German version EN ISO 11244:1999) |
| DIN EN ISO 11245-2000 |
牙齒修復.磷酸鹽粘結耐火模鑄材料 |
(Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999); German version EN ISO 11245:2000) |
| DIN EN ISO 11246-1999 |
牙科硅酸乙脂粘接鑄造包埋料 |
(Dental ethyl silicate bonded casting investments (ISO 11246:1996); German version EN ISO 11246:1998) |
| DIN EN ISO 11248-1999 |
塑料.熱塑材料.高溫下短期特性的評定 |
(Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999) |
| DIN EN ISO 11254-1-2000 |
激光和激光相關設備.光學表面激光誘導損傷閾的測定.第1部分:1-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000) |
| DIN EN ISO 11254-2-2002 |
激光和激光相關設備.光學表面激光誘導損傷閾的測定.第2部分:S-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001); German version EN ISO 11254-2:2001) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com