標準號 |
中文名稱 |
英文名稱 |
| BS EN 12983-1-2000 |
烹飪用具.爐、爐架上使用的家用烹飪用具.一般要求 |
(Cookware - Domestic cookware for use on top of a stove, cooker or hob - General requirements) |
| BS EN 1299-1997 |
機械振動和沖擊.機械的振動隔離.振動源隔離的使用信息 |
(Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation) |
| BS EN 12999-2003 |
起重機.裝載起重機 |
(Cranes - Loader cranes) |
| BS EN 1300-2004 |
安全儲存設備.防范非正常打開的高度安全鎖的分類 |
|
| BS EN 13002-2-1999 |
碳纖維長絲紗.試驗方法和通用規范 |
(Carbon fibre yarns - Test methods and general specifications) |
| BS EN 13003-1-1999 |
帕蠟-芳族聚酰胺纖維長絲紗.名稱與符號 |
(Para-aramid fibre filament yarns - Designation) |
| BS EN 13003-2-1999 |
帕蠟-芳族聚酰胺纖維長絲紗.試驗方法和通用規范 |
(Para-aramid fibre filament yarns - Methods of test and general specifications) |
| BS EN 13003-3-1999 |
帕蠟-芳族聚酰胺纖維長絲紗.技術規范 |
(Para-aramid fibre filament yarns - Technical specifications) |
| BS EN 13007-2000 |
鋼桶.額定容量20l到60l帶固定蓋的桶 |
(Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l) |
| BS EN 13008-2000 |
鋼桶.額定容量15l到62l帶可挪開蓋的桶 |
(Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l) |
| BS EN 13009-2000 |
建筑材料和產品的水熱性能.吸水膨脹系數的測定 |
(Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient) |
| BS EN 1301-1-1997 |
鋁和鋁合金.拉制線.檢查和傳遞的技術條件 |
(Aluminium and aluminium alloys - Drawn wire - Technical conditions for inspection and delivery) |
| BS EN 1301-2-1997 |
鋁和鋁合金.冷拔絲.機械性能 |
(Aluminium and aluminium alloys - Drawn wire - Mechanical properties) |
| BS EN 1301-3-1997 |
鋁和鋁合金.拉制線.規格耐力 |
(Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions) |
| BS EN 13010-2003 |
包裝.單件包裝.顯示板的尺寸和要求 |
(Packaging - Unit packaging - Dimensions and requirements for pegboard display) |
| BS EN 130100-1998 |
電子器件質量評定協調體系.分規范:直流電流用固定聚對二甲酸乙酯膜介電金屬箔電容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current) |
| BS EN 130101-1998 |
電子器件質量評定協調體系.空白詳細規范:直流電流用固定聚對二甲酸乙酯膜介電金屬箔電容器.評估級E |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current - Assessment l) |
| BS EN 130102-1998 |
電子器件質量評定協調體系.空白詳細規范:直流電流用固定聚對二甲酸乙酯膜介電金屬箔電容器.評估EZ級 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current - Assessment l) |
| BS EN 13011-2001 |
運輸服務.貨物運輸鏈.性能條件的申明系統 |
(Transport services - Goods transport chains - System for declaration of performance conditions) |
| BS EN 13012-2002 |
加油站.用于燃料自動售貨機上的自動注口的結構和性能 |
(Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers) |
| BS EN 13014-2000 |
麻醉和呼吸設備用氣體取樣管的連接 |
(Connections for gas sampling tubes to anaesthetic and respiratory equipment) |
| BS EN 13015-2001 |
電梯和升降機維護.維護說明規則 |
(Maintenance for lifts and escalators - Rules for maintenance instructions) |
| BS EN 13016-1-2000 |
液態石油產品.蒸氣壓力.氣體飽和蒸氣壓力(ASVP)的測定 |
(Liquid petroleum products - Vapour pressure - Determination of air saturated vapour pressure (ASVP)) |
| BS EN 13016-2-2000 |
液態石油產品.蒸氣壓力.40℃和100℃之間絕對蒸氣壓力(ASVP)的測定 |
(Liquid petroleum products - Vapour pressure - Determination of absolute vapour pressure (AVP) between 40 鳦 and 100 鳦) |
| BS EN 13017-1-2001 |
實心木板.根據表面性質分類.軟木 |
(Solid wood panels - Classification by surface appearance - Solid wood panels - Classification by surface appearance - Softwood) |
| BS EN 13017-2-2001 |
實心木板.根據表面性質分類.硬木 |
(Solid wood panels - Classification by surface appearance - Hardwood) |
| BS EN 13018-2001 |
無損試驗.視覺試驗.一般原理 |
(Non-destructive testing - Visual testing - General principles) |
| BS EN 13019-2001 |
道路表面清潔機.安全要求 |
(Machines for road surface cleaning - Safety requirements) |
| BS EN 1302-1999 |
人類消耗用水處理用藥液.鋁基絮凝劑.分析方法 |
(Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods) |
| BS EN 130200-1993 |
電子器件質量評定體系.帶固體式或非固體式液體電解質的鉭固定電容器的分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte) |
| BS EN 130201-1995 |
電子器件質量評定協調體系規范.空白詳細規范.帶固體電解質和多孔陽極的鉭固定電容器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)) |
| BS EN 130202-1998 |
電子器件質量評定協調體系.空白詳細規范.帶有非固體電解質多孔電極(亞系2)的固定鉭電容器 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)) |
| BS EN 13021-2003 |
冬季使用機械的安全要求 |
(Winter service machines - Safety requirements) |
| BS EN 13023-2003 |
打英紙張加工、造紙機械和輔助設備的噪聲測量.準確度等級為2和3 |
(Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3) |
| BS EN 13024-1-2002 |
建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.定義和描述 |
(Glass in building - Thermally toughened borosilicate safety glass - Definition and description) |
| BS EN 13024-2-2004 |
建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.合格評價/產品標準 |
|
| BS EN 13024-2-2004 |
建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.合格評價/產品標準 |
|
| BS EN 13025-2000 |
包裝.輕型金屬包裝.最大不超過40000ml容積的圓形、柱形和錐形通用金屬容器的標稱體積 |
(Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml) |
| BS EN 13026-2001 |
包裝.輕型金屬包裝.一般用途的非園形,圓柱形,錐形容積達30000ml的金屬容器的標稱填充容積 |
(Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml) |
| BS EN 13027-2001 |
包裝.輕型金屬包裝.由標稱容量限定的敞口的園形容器 |
(Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity) |
| BS EN 13028-2001 |
包裝.輕型金屬包裝.由標稱容量限定的有或無填充氣體的園形敞口容器 |
(Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes) |
| BS EN 13029-2001 |
包裝.輕型金屬包裝.塞塑料封閉物的縫隙 |
(Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures) |
| BS EN 1303-1998 |
建筑五金.鎖用柱體.要求和試驗方法 |
(Building hardware - Cylinders for locks - Requirements and test methods) |
| BS EN 1303-2005 |
建筑五金.鎖芯.要求和試驗方法 |
|
| BS EN 13030-2001 |
建筑物的通風.終端.固定百葉窗經受模擬雨的性能試驗 |
(Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain) |
| BS EN 130300-1998 |
電子器件質量評定協調體系.空白詳細規范.帶有非固體電解質的鋁電解質電容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte) |
| BS EN 130301-2002 |
電子器件質量評定的協調系統.空白詳細規范.帶非固體電解質的鋁電解質電容器 |
(Harmonized system of quality assessment for electronic components - Blank Detail Specification - Aluminium electrolytic capacitors with non-solid electrolyte) |
| BS EN 13031-1-2002 |
暖房.設計和建造.商品性生產用暖房 |
(Greenhouses - Design and construction - Commercial production greenhouses) |
| BS EN 13034-2005 |
液態化學物質防護服裝.提供有限的液態化學物質防護性能的化學防護服裝的性能要求(6型和PB[6]型設備) |
|
| BS EN 13035-3-2003 |
平板玻璃的制造、處理和加工用機械和設備.安全要求.切割機 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines) |
| BS EN 13035-4-2003 |
平板玻璃的制造、處理和加工用機械和設備.安全要求.傾斜臺 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Tilting tables) |
| BS EN 13036-1-2002 |
道路和飛機場表面特征.試驗方法.使用體積修補技術測量道路表面大的結構深度 |
(Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique) |
| BS EN 13036-3-2003 |
道路和飛機場表面特征.試驗方法.路面水平排水性能的測量 |
(Road and airfield surface characteristics - Test methods - Measurement of pavement surface horizontal drainability) |
| BS EN 13036-4-2003 |
道路和機場表面特征.試驗方法.表面耐滑性的測量方法.擺動法 |
(Road and airfield surface characteristics - Test methods - Method for measurement of slip/skid resistance of a surface - The pendulum test) |
| BS EN 13036-7-2003 |
道路和機場表面特征.試驗方法.路面層不平整性測量.直尺檢驗 |
(Road and airfield surface characteristics - Test methods - Irregularity measurement of pavement courses - The straightedge test) |
| BS EN 13037-2000 |
土壤改良劑和培養基.PH值的測定 |
(Soil improvers and growing media - Determination of pH) |
| BS EN 13038-2000 |
土壤改良劑和培養基.電導性測定 |
(Soil improvers and growing media - Determination of electrical conductivity) |
| BS EN 13039-2000 |
土壤改良劑和培養基.有機物質含量和灰分測定 |
(Soil improvers and growing media - Determination of organic matter content and ash) |
| BS EN 1304-1998 |
非連續鋪設的粘土屋面瓦.產品定義和規范 |
(Clay roofing tiles for discontinuous laying - Products definitions and specifications) |
| BS EN 1304-2005 |
粘土屋面瓦和配件.產品定義和規范 |
|
| BS EN 13040-2000 |
土壤改良劑和培養基.物理和化學試驗、干物質含量和潮氣含量及實驗室壓實松散材料密度的測定用樣品制備 |
(Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density) |
| BS EN 13041-2000 |
土壤改良劑和培養基.物理性能測定.毛體積干密度、空氣量、水量、收縮值和總空隙容積 |
(Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space) |
| BS EN 13042-2-2004 |
空心玻璃生產、處理和加工用機械和設備.安全要求.給料用搬運機械 |
|
| BS EN 13042-2-2004 |
空心玻璃生產、處理和加工用機械和設備.安全要求.給料用搬運機械 |
|
| BS EN 13042-5-2003 |
空心玻璃生產、處理和加工用機械和設備.安全要求.壓力機 |
(Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses) |
| BS EN 13043-2002 |
機場道路和其他行車區域瀝青混合物和表面處理用集料 |
(Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas) |
| BS EN 13044-2001 |
交換部件.編碼.識別和標記 |
(Swap bodies - Coding, identification and marking) |
| BS EN 13045-2000 |
包裝.圓柱形塑料軟管.尺寸和公差 |
(Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances) |
| BS EN 13046-2000 |
包裝.圓柱形金屬軟管.尺寸和公差 |
(Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances) |
| BS EN 13047-2000 |
包裝.錐形金屬軟管.尺寸和公差 |
(Packaging - Flexible conical metallic tubes - Dimensions and tolerances) |
| BS EN 13048-2000 |
包裝.鋁軟管.內部清漆薄膜厚度測量方法 |
(Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method) |
| BS EN 13049-2003 |
窗.軟質和笨重物體沖擊.試驗方法、安全要求和分類 |
(Windows - Soft and heavy body impact - Test method, safety requirements and classification) |
| BS EN 1305-1996 |
內河航運船只.油殘渣排放用連接件 |
(Inland navigation vessels - Connections for the discharge of oily mixture) |
| BS EN 130500-1998 |
電子器件質量評定協調體系.空白詳細規范.直流電用固定金屬多碳膜介質電容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current) |
| BS EN 130501-1998 |
電子器件質量評定協調體系.空白詳細規范.直流電用固定金屬多碳膜介質電容器.評估等級E |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level E) |
| BS EN 130502-1998 |
電氣件質量評估的協同系統.空白詳細規范.直流電用固定金屬多碳膜介質電容器.評估等級EZ |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level EZ) |
| BS EN 13051-2001 |
幕墻.不透水性.位點試驗 |
(Curtain walling - Watertightness - Site test) |
| BS EN 13052-1-2001 |
有機物質對人類生活用水的影響.有機物質.管道系統中水的顏色和濁度的測定.試驗方法 |
(Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Test method) |
| BS EN 13053-2002 |
建筑物通風設備.空氣處理設備.設備、組件和零件的額定值和性能 |
(Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections) |
| BS EN 13054-2001 |
包裝.完全填充運輸包裝.測定包裹重量中心的試驗方法 |
(Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package) |
| BS EN 13055-1-2002 |
輕集料.混凝土、泥漿和渣滓用輕集料 |
(Lightweight aggregates - Lightweight aggregates for concrete, mortar and grout) |
| BS EN 13055-2-2004 |
輕集料.瀝青混合料和表面處理及非粘結和粘結用輕集料 |
|
| BS EN 13056-2000 |
內河運輸船.30度到小于45度傾斜角樓梯.要求和類型 |
(Inland navigation vessels - Stairs with inclination angles of 30 degrees to) |
| BS EN 13057-2002 |
混凝土結構的防護和維修用產品和系統.試驗方法.抗毛細管吸收性的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption) |
| BS EN 13059-2002 |
工業用車的安全.振動測量的試驗方法 |
(Safety of industrial trucks - Test methods for measuring vibration) |
| BS EN 1306-1996 |
內河航運船只.污水排放用連接件 |
(Inland navigation vessels - Connections for the discharge of waste water) |
| BS EN 13060-2005 |
小型蒸汽滅菌器 |
|
| BS EN 13061-2002 |
防護服裝.相關足球運動員用護脛.要求與試驗方法 |
(Protective clothing - Shin guards for association football players - Requirements and test methods) |
| BS EN 13062-2003 |
混凝土結構的保護和檢修用產品和系統.試驗方法.增強保護用產品的觸變性測定 |
(Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement) |
| BS EN 13067-2003 |
塑料焊接人員.焊工的資格檢驗.熱塑焊接組件 |
(Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies) |
| BS EN 13068-1-2000 |
無損檢驗.射線檢驗法.成像性能的定量測量 |
(Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties) |
| BS EN 13068-2-2000 |
無損檢驗.射線檢驗法.成像設備長期穩定性的檢查 |
(Non-destructive testing - Radioscopic testing - Check of long term stability of imaging devices) |
| BS EN 13068-3-2001 |
無損檢驗.射線檢驗.χ和γ射線對金屬材料進行射線檢驗的一般原理 |
(Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays) |
| BS EN 1307-1997 |
鋪地織物.毛地毯的分級 |
(Textile floor coverings - Classification of pile carpets) |
| BS EN 1307-2005 |
鋪地織物.絨頭地毯的分級 |
|
| BS EN 13071-2002 |
廢棄物分類收集容器.廢物分類收集用容積為80l-5000l的地面機械提升容器 |
(Selective waste collection containers - Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste) |
| BS EN 13073-2001 |
鞋靴.整個鞋的試驗方法.耐水性 |
(Footwear - Test methods for whole shoe - Water resistance) |
| BS EN 13074-2002 |
石油及其產品的試驗方法.石油產品.瀝青和瀝青粘合劑.蒸發瀝青乳液測定粘合劑的復原性 |
(Methods of test for petroleum and its products - Petroleum products - Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation) |
| BS EN 13075-1-2002 |
石油及其產品的試驗方法.用礦物過濾法測定瀝陽離子青乳膠劑斷裂值 |
(Methods of test for petroleum and its products - Determination of breaking value of cationic bitumen emulsions, mineral filler method) |
| BS EN 13075-2-2002 |
石油及其產品的試驗方法.測定瀝陽離子青乳膠劑的精華含混時間 |
(Methods of test for petroleum and its products - Determination of fines mixing time of cationic bitumen emulsions) |
| BS EN 13076-2003 |
防飲用水回流污染裝置.無限制的氣隙.A類、A型 |
(Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A, type A) |
| BS EN 13077-2003 |
防飲用水回流污染裝置.帶不循環溢流口的(無限制)氣隙.A類B型 |
(Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A, type B) |
| BS EN 13078-2003 |
防飲用水回流污染裝置.帶浸沒式給水并裝有空氣進口和溢流口的氣隙.A類C型 |
(Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C) |
| BS EN 13079-2003 |
防飲用水回流造成污染的設備.有噴嘴的氣隙.A類.D型 |
(Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A. Type D) |
| BS EN 1308-1999 |
磁磚膠粘劑.滑動性的測定 |
(Adhesives for tiles - Determination of slip) |
| BS EN 13080-2002 |
農用機械.糞肥撒布機.環保.要求和試驗方法 |
(Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods) |
| BS EN 130800-2001 |
電子器件質量評定協調系統.分規范.鉭表面安裝電容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Tantalum surface mounting capacitors) |
| BS EN 13081-2001 |
危險商品運輸用罐.裝罐設備.蒸汽收集適配器和耦合器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adapter and coupler) |
| BS EN 13082-2001 |
危險商品運輸用罐.裝罐設備.蒸汽轉化閥門 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve) |
| BS EN 13083-2001 |
危險商品運輸用罐.裝罐設備.低部負載和非負載的適配器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Adapter for bottom loading and unloading) |
| BS EN 13084-1-2000 |
獨立的工業煙囪.一般要求 |
(Free-standing industrial chimneys - Free-standing industrial chimneys - General requirements) |
| BS EN 13084-2-2002 |
獨立式工業用煙囪.混凝土煙囪 |
(Free-standing industrial chimneys - Concrete chimneys) |
| BS EN 13084-4-2002 |
獨立式工業用煙囪.砌磚襯墊.設計和施工 |
(Free-standing industrial chimneys - Brick liners - Design and execution) |
| BS EN 13084-5-2005 |
獨立式工業用煙囪.磚襯墊材料.產品規范 |
|
| BS EN 13085-2001 |
墻面覆蓋物.軟木輥子規范 |
(Wallcoverings - Specification for cork rolls) |
| BS EN 13086-2000 |
鉛及鉛合金.氧化鉛 |
(Lead and lead alloys - Lead oxides) |
| BS EN 13087-1-2000 |
防護頭盔.試驗方法.條件和調節 |
(Protective helmets - Test methods - Conditions and conditioning) |
| BS EN 13087-10-2000 |
防護帽.試驗方法.耐熱輻射性 |
(Protective helmets - Test methods - Resistance to radiant heat) |
| BS EN 13087-2-2000 |
防護頭盔.試驗方法.減震 |
(Protective helmets - Test methods - Shock absorption) |
| BS EN 13087-3-2000 |
防護頭盔.試驗方法.抗?jié)B透性 |
(Protective helmets - Test methods - Resistance to penetration) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com