標準號 |
中文名稱 |
英文名稱 |
| BS EN 573-4-1995 |
鋁和鋁合金.鍛制品的化學組成和外形.產品外形 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Forms of products) |
| BS EN 573-4-2004 |
鋁和鋁合金.鍛制品的化學組成和外形.產品外形 |
|
| BS EN 574-1997 |
機械安全.雙柄控制設備.函數狀況.設計原理 |
(Safety of machinery - Two-hand control devices - Functional aspects - Principles for design) |
| BS EN 575-1996 |
鋁和鋁合金.熔鑄母合金.規范 |
(Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) |
| BS EN 576-2003 |
鋁和鋁合金.再熔非合金鋁錠.規范 |
(Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) |
| BS EN 577-1996 |
鋁和鋁合金.液體金屬.規范 |
(Aluminium and aluminium alloys - Liquid metal - Specifications) |
| BS EN 578-1994 |
塑料和管道系統.塑料管和配件.不透明度的測定 |
(Plastics piping systems - Plastics pipes and fittings - Determination of the opacity) |
| BS EN 579-1994 |
塑料管道系統.交聯聚乙烯(PE-X)管.溶劑萃取法測定交聯密度 |
(Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction) |
| BS EN 58-2004 |
瀝青和瀝青粘合劑.瀝青粘合劑抽樣 |
|
| BS EN 580-2003 |
塑料管道系統.未增塑聚氯乙烯(PVC-U)管.特定溫度下耐二氯甲烷的試驗方法 |
(Plastics piping Systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test methods for the resistance to dichloromethane at a specified temperature (DCMT)) |
| BS EN 581-1-1997 |
戶外家具.野營、家用和訂做的座椅和桌子.一般安全要求 |
(Outdoor furniture - Seating and tables for camping, domestic and contract use - General safety requirements) |
| BS EN 581-3-1999 |
戶外家具.野營、家用和訂做的座椅和桌子.機械安全要求和桌子的試驗方法 |
(Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for tables) |
| BS EN 582-1994 |
熱噴涂層的試驗.膠粘劑抗拉強度的測定 |
(Thermal spraying - Determination of tensile adhesive strength) |
| BS EN 583-1-1999 |
非損試驗.超聲波檢驗.一般規則 |
(Non-destructive testing - Ultrasonic examination - General principles) |
| BS EN 583-2-2001 |
無損檢驗.超聲波檢驗.敏感性和范圍設定 |
(Non-destructive testing - Ultrasonic examination - Sensitivity and range setting) |
| BS EN 583-3-1997 |
無損檢驗.超聲波檢驗.第3部分:超聲技術 |
(Non-destructive testing - Ultrasonic examination - Transmission technique) |
| BS EN 583-4-2002 |
無損檢驗.超聲波檢驗.表面垂直面的不連續性檢驗 |
(Non-destructive testing - Ultrasonic examination - Examination for discontinuities perpendicular to the surface) |
| BS EN 583-5-2001 |
非損試驗.超聲波檢驗.不連續性檢驗的特征和尺寸測量 |
(Non-destructive testing - Ultrasonic examination - Characterization and sizing of discontinuities) |
| BS EN 584-1-1995 |
無損試驗.工業用X射線照相膠片.第1部分:工業X射線照相用膠片體系的分類 |
(Non-destructive testing - Industrial radiographic film - Classification of film systems for industrial radiography) |
| BS EN 584-2-1997 |
無損試驗.工業用X射線照相膠片.參考值法控制膠片工藝 |
(Non-destructive testing - Industrial radiographic film - Control of film processing by means of reference values) |
| BS EN 586-1-1998 |
鋁和鋁合金.鍛造.檢驗和驗收技術條件 |
(Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery) |
| BS EN 586-2-1994 |
鋁和鋁合金.鍛件.機械特性和附加特性要求 |
(Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property requirements) |
| BS EN 586-3-2002 |
鋁和鋁合金.鍛件.尺寸和形狀公差 |
(Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form) |
| BS EN 588-1-1997 |
下水管和排水道用纖維水泥管.第1部分:重力管系統用管道、管連接件和管配件 |
(Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems) |
| BS EN 588-2-2002 |
下水管和排水道用纖維水泥管.人空和檢驗室 |
(Fibre-cement pipes for sewers and drains - Manholes and inspection chambers) |
| BS EN 589-2000 |
汽車燃料.液化石油氣.要求和試驗方法 |
(Automotive fuels - LPG - Requirements and test methods) |
| BS EN 589-2004 |
機動車用燃料.液化石油氣(LPG).要求和試驗方法 |
|
| BS EN 589-2004 |
機動車用燃料.液化石油氣(LPG).要求和試驗方法 |
|
| BS EN 590-2000 |
汽車燃料.柴油.要求和試驗方法 |
(Automotive fuels - Diesel - Requirements and test methods) |
| BS EN 590-2004 |
機動車燃料.柴油.要求和試驗方法 |
|
| BS EN 591-2001 |
專業用玻璃診斷器械的使用說明 |
(Instructions for use for in vitro diagnostic instruments for professional use) |
| BS EN 592-2002 |
自我測試用活體外診斷儀器的使用說明書 |
(Instructions for use for in vitro diagnostic instruments for self-testing) |
| BS EN 593-1998 |
工業閥門.金屬蝶閥 |
(Industrial valves - Metallic butterfly valves) |
| BS EN 593-2004 |
工業閥門.金屬蝶閥 |
|
| BS EN 594-1996 |
木結構.試驗方法.結構墻板剝離強度和剛度的試驗 |
(Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels) |
| BS EN 595-1995 |
木材結構.試驗方法.強度和變形特性的測定用桁架的試驗 |
(Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour) |
| BS EN 596-1995 |
木結構.試驗方法.木框架墻的軟體沖擊試驗 |
(Timber structures - Test methods - Soft body impact test of timber framed walls) |
| BS EN 597-1-1995 |
家具.床墊和裝飾床具著火性評定.火源:陰燃卷煙 |
(Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Ignition source: smouldering cigarette) |
| BS EN 597-2-1995 |
家具.床墊和裝飾床具著火性評定.火源:火柴火焰 |
(Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Ignition source: match flame equivalent) |
| BS EN 598-1995 |
污水工程用球墨鑄鐵管,配件和其它接頭.要求和試驗方法 |
(Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods) |
| BS EN 599-1-1997 |
木材和衍生材料的耐久性.用生物試驗測定的木材防腐劑的性能.第1部分:按危險等級的分類 |
(Durability of wood and wood-based products - Performance of preservatives as determined by biological tests - Specification according to hazard class) |
| BS EN 599-2-1997 |
木材和木制品的耐久性.用生物試驗測定的木材防腐劑的性能.第2部分:分類和標記 |
(Durability of wood and wood-based products - Performance of preservatives as determined by biological tests - Classification and labelling) |
| BS EN 60034-1-1998 |
旋轉電機.額定值和性能 |
(Rotating electrical machines - Rating and performance) |
| BS EN 60034-12-1996 |
旋轉電機.電壓達到和包括690V,50Hz的單速三相籠式感應電機的啟動性能 |
(Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz) |
| BS EN 60034-14-1998 |
旋轉電機.軸高56mm和更高的特定機械的機械振動.測量、評估和振動限值 |
(Rotating electrical machines - Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration) |
| BS EN 60034-14-2004 |
旋轉電機.軸高56mm和更高的特定機械的機械振動.測量、評價和劇烈振動限值 |
|
| BS EN 60034-15-1996 |
旋轉電機.第15部分:耐用線圈架繞線定子線圈交流旋轉電機電平的脈沖電壓 |
(Rotating electrical machines - Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils) |
| BS EN 60034-16-1-1992 |
旋轉電機.同步電機勵磁系統.定義 |
(Rotating electrical machines - Excitation systems for synchronous machines - Definitions) |
| BS EN 60034-18-1-1994 |
旋轉電機.絕緣系統功能評定.通用導則 |
(Rotating electrical machines - Functional evaluation of insulation systems - General guidelines) |
| BS EN 60034-18-21-1994 |
旋轉電機.絕緣系統功能評定.線繞線圈的試驗過程.熱評定和分類 |
(Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification.) |
| BS EN 60034-18-22-2001 |
旋轉電機.絕緣系統的功能評價.金屬線繞組的試驗過程.絕緣件替代物的分類 |
(Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions) |
| BS EN 60034-18-31-1994 |
旋轉電機.第18部分:絕緣體系的功能評定.第31節:模繞繞組線的試驗程序.用于50MVA、15kV以下(包括50MVA和15kV |
(Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up t) |
| BS EN 60034-2-1999 |
旋轉電機.旋轉電機損耗和效率的試驗測定方法(不包括牽引車輛用電機) |
(Rotating electrical machines - Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)) |
| BS EN 60034-22-1998 |
旋轉電機.往復式內燃機(RIC)引擎驅動發電裝置交流發電機. |
(Rotating electrical machines - A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets) |
| BS EN 60034-3-1992 |
旋轉電機.渦輪機型同步電機的具體要求 |
(Rotating electrical machines - Specific requirements for turbine-type synchronous machines) |
| BS EN 60034-4-1988 |
旋轉電機.第4部分:由試驗測定同步電機參數的方法 |
(Rotating electrical machines - Methods for determining synchronous machine quantities from tests) |
| BS EN 60034-5-2001 |
旋轉電機.由旋轉電機總體設計提供的防護級別.分級 |
(Rotating electrical machines - Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification) |
| BS EN 60034-6-1994 |
旋轉電機.第6部分:冷卻方法 |
(Rotating electrical machines - Methods of cooling (IC Code)) |
| BS EN 60034-7-1993 |
旋轉電機.第7部分:結構和安裝配置類型分類(IM規程) |
(Rotating electrical machines - Classification of types of constructions and mounting arrangements (IM Code)) |
| BS EN 60034-8-2002 |
旋轉電機.終端標志與旋轉方向 |
(Rotating electrical machines - Terminal markings and direction of rotation) |
| BS EN 60034-9-1998 |
旋轉電機.噪音極限值 |
(Rotating electrical machines - Noise limits) |
| BS EN 60041-1995 |
水輪機,蓄水泵和渦輪泵液壓性能測定的現場驗收試驗 |
(Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines) |
| BS EN 60044-1-1999 |
儀表用變壓器.電流互感器 |
(Instrument transformers - Current transformers) |
| BS EN 60044-2-1999 |
儀表用變壓器.感應變壓器 |
(Instrument transformers - Inductive voltage transformers) |
| BS EN 60044-3-2003 |
儀表用變壓器.組合變壓器 |
(Instrument transformers - Combined transformers) |
| BS EN 60044-5-2004 |
儀表互感器.電容電壓互感器 |
|
| BS EN 60044-6-1999 |
儀表用變壓器.瞬時傳送特性傳送保護用電流變壓器的要求 |
(Instrument transformers - Requirements for protective current transformers for transient performance) |
| BS EN 60044-7-2000 |
儀表用變壓器.電壓變換器 |
(Instrument transformers - Electronic voltage transformers) |
| BS EN 60044-8-2002 |
儀表用變壓器.電流變壓器 |
(Instrument transformers - Electronic current transformers) |
| BS EN 60045-1-1993 |
汽輪機采購指南 |
(Guide to steam turbine procurement - Guide to steam turbine procurement) |
| BS EN 60051-1-1999 |
直接動作指示模擬電氣測量?jī)x器及其附件. 通用于所用部件的定義和一般要求 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Definitions and general requirements common to all parts) |
| BS EN 60052-2003 |
用標準(空)氣隙法測量電壓 |
(Voltage measurement by means of standard air gaps) |
| BS EN 60059-1999 |
IEC標準電流額定值 |
(IEC standard current ratings) |
| BS EN 60060-2-1995 |
高壓試驗技術.第2部分:測量裝置 |
(High-voltage test techniques - Measuring systems) |
| BS EN 60061-1-1997 |
燈頭、燈座及檢驗其安全性和互換性的量規規范.燈頭 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lamps caps) |
| BS EN 60061-2-1997 |
燈頭、燈座及檢驗其互換性和安全性的量規規范.燈座 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lampholders) |
| BS EN 60061-3-1997 |
燈頭、燈座及檢驗其互換性和安全性的量規規范.量規 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Gauges) |
| BS EN 60061-4-1990 |
帶互換性和安全控制量規的燈座和燈頭規范.導則和一般說明 |
(Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Guidelines and general information) |
| BS EN 60062-1994 |
電阻器和電容器的標志代碼 |
(Marking codes for resistors and capacitors) |
| BS EN 60062-2005 |
電阻器和電容器標志代碼 |
|
| BS EN 60064-1996 |
家用和類似普通照明用鎢燈泡.性能要求 |
(Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements) |
| BS EN 60065-2002 |
音頻,錄相和類似電器的安全要求 |
(Audio, video and similar electronic apparatus - Safety requirements) |
| BS EN 60068-1-1995 |
環境試驗規程.第1部分:總則和導則 |
(Environmental testing - General and guidance) |
| BS EN 60068-2-1-1990 |
環境試驗.試驗.第2部分:試驗A.第1節:低溫法 |
(Environmental testing - Test methods - Tests A. Cold) |
| BS EN 60068-2-11-1999 |
環境試驗.試驗方法.試驗.試驗Ka:鹽霧 |
(Environmental testing - Test methods - Tests - Test KA - Salt mist) |
| BS EN 60068-2-13-1999 |
環境試驗.試驗方法.試驗.試驗M:低氣壓 |
(Environmental testing - Test methods - Tests - Test M. Low air pressure) |
| BS EN 60068-2-14-2000 |
環境試驗.試驗方法.試驗N.溫度的變化 |
(Environmental testing - Test methods - Test N. Change of temperature) |
| BS EN 60068-2-17-1995 |
環境試驗.試驗方法.試驗Q 密封 |
(Environmental testing - Test methods - Test Q. Sealing) |
| BS EN 60068-2-18-2001 |
環境試驗.試驗方法.試驗R和導則.水 |
(Environmental testing - Test methods - Tests R and guidance - Water) |
| BS EN 60068-2-2-1993 |
環境試驗.第2部分:試驗方法.第2節:試驗B.干熱. |
(Environmental testing - Test methods - Tests B. Dry heat) |
| BS EN 60068-2-21-1999 |
環境試驗.試驗方法.試驗U.終端和集成固定裝置的牢固度 |
(Environmental testing - Test methods - Test U. Robustness of terminations and integral mounting devices) |
| BS EN 60068-2-27-1988 |
環境試驗.第2部分:試驗.第27節:試驗Ea指南.沖擊 |
(Environmental testing - Test methods - Environmental testing procedures - Tests - Test Ea and guidance - Shock) |
| BS EN 60068-2-29-1987 |
環境試驗.第2部分:試驗.第29節:試驗Eb和導則.碰撞 |
(Environmental testing - Test methods - Environmental testing procedures - Tests - Test Eb and guidance - Bump) |
| BS EN 60068-2-30-1999 |
環境試驗.試驗方法.試驗.試驗Db和指南:交變濕熱(12+12小時循環) |
(Environmental testing - Test methods - Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)) |
| BS EN 60068-2-31-1977 |
環境試驗.試驗.試驗Ec.跌落和傾復.設備樣品的原樣 |
(Environmental testing - Test methods - Test Ec - Drop and topple, primarily for equipment-type specimens) |
| BS EN 60068-2-32-1992 |
環境試驗.試驗.試驗Ed.自由跌落 |
(Environmental testing - Test methods - Test Ed - Free fall) |
| BS EN 60068-2-33-2000 |
環境試驗.試驗方法.溫度變化試驗指南 |
(Environmental testing - Test methods - Guidance on change of temperature tests) |
| BS EN 60068-2-38-1999 |
環境試驗.試驗方法.試驗.試驗Z/AD:混合溫度/濕度循環試驗 |
(Environmental testing - Test methods - Tests - Test Z/AD:composite temperature/humidity cyclic test) |
| BS EN 60068-2-39-1999 |
環境試驗.試驗方法.試驗.試驗Z/AMD.低溫、低氣壓和濕熱的綜合連續試驗 |
Environmental testing - Test methods - Tests - Test Z/AMD - Combined sequential cold, low air pressure and damp heat test |
| BS EN 60068-2-40-2000 |
環境試驗.試驗方法.試驗Z/AM.冷/低氣壓結合試驗 |
(Environmental testing - Test methods - Test Z/AM - Combined cold/low air pressure tests) |
| BS EN 60068-2-41-2000 |
環境試驗.試驗方法.試驗Z/BM.干熱/低氣壓結合試驗 |
(Environmental testing - Test methods - Tests - Test Z/BM: Combined dry heat/low air pressure tests) |
| BS EN 60068-2-42-2003 |
環境試驗.試驗方法.試驗Kc.觸點和連接件用二氧化硫試驗 |
(Environmental testing - Test methods - Test Kc - Sulphur dioxide test for contacts and connections) |
| BS EN 60068-2-43-2003 |
環境試驗.試驗方法.試驗Kd.觸點和連接件用硫化氫試驗 |
(Environmental testing - Test methods - Test Kd - Hydrogen sulphide test for contacts and connections) |
| BS EN 60068-2-44-1995 |
環境試驗.第2部分:試驗方法.第44節:試驗T指南:錫焊 |
(Environmental testing - Test methods - Tests - Guidance on Test T. Soldering) |
| BS EN 60068-2-45-1981 |
環境試驗.第2部分:試驗.試驗XA和導則.第45節:清洗溶劑中浸漬 |
(Environmental testing - Test methods - Environmental testing - Tests - Test XA and guidance - Immersion in cleaning solvents) |
| BS EN 60068-2-47-2000 |
環境試驗.試驗方法.振動、沖擊和類似動態試驗用件、設備和其它設備的安裝 |
(Environmental testing - Test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests) |
| BS EN 60068-2-47-2005 |
環境試驗.試驗.振動、沖擊和類似動態試驗用試樣的安裝 |
|
| BS EN 60068-2-48-2000 |
環境試驗.試驗方法.模擬儲存效果的IEC 60068試驗的應用指南 |
(Environmental testing - Test methods - Guidance on the application of the tests of IEC 60068 to simulate the effects of storage) |
| BS EN 60068-2-5-2000 |
環境試驗.試驗方法.試驗Sa:模擬地平線的太陽輻射 |
Environmental testing - Test methods - Test Sa: Simulated solar radiation at ground level |
| BS EN 60068-2-50-2000 |
環境試驗.試驗方法.試驗Z/AFc:熱散失和無熱散失樣品同時存在的冷/振動(正弦)結合試驗 |
(Environmental testing - Test methods - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens) |
| BS EN 60068-2-51-2000 |
環境試驗.試驗方法.試驗.試驗Z/BFc:熱散失和無熱散失樣品的合成干熱/振動(正弦)試驗 |
(Environmental testing - Test methods - Tests - Tests Z/BFc - Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens) |
| BS EN 60068-2-52-1996 |
環境試驗規程.試驗方法.試驗.Kb試驗.鹽霧試驗持續周期(氯化鈉溶液) |
Environmental testing - Test methods - Tests - Test Kb - Salt mist cyclic (sodium chloride solution) |
| BS EN 60068-2-55-1988 |
環境試驗程序.第2部分:試驗.第55節:試驗Ee和導則:振動 |
(Environmental testing - Test methods - Environmental testing procedures - Tests - Test Ee and guidance - Bounce) |
| BS EN 60068-2-57-2000 |
環境試驗.試驗方法.試驗Ff.振動.時間系列法 |
Environmental testing - Test methods - Test Ff - Vibration - Time-history method |
| BS EN 60068-2-58-1999 |
環境試驗.試驗方法.試驗Td.軟釬焊性、噴涂金屬耐融化性和表面裝配設備(SMD)耐焊接熱的試驗方法 |
Environmental testing - Test methods - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| BS EN 60068-2-58-2004 |
環境試驗.試驗方法.試驗Td.表面安裝設備用可焊性、耐金屬溶融和耐焊接熱的試驗方法 |
|
| BS EN 60068-2-59-1991 |
環境試驗.第2部分:試驗.試驗Fe和導則.第59部分:振動(正弦拍頻法) |
Environmental testing - Test methods - Test Fe and guidance - Vibration (sine-beat method) |
| BS EN 60068-2-6-1996 |
基本環境試驗規程.第2部分:試驗.第6節:試驗Fc:振動(正弦波) |
Environmental testing - Test methods - Test Fc - Vibration (sinusoidal) |
| BS EN 60068-2-60-1996 |
環境試驗.第2部分:試驗.第60節:試驗Ke:流動混合氣體的腐蝕試驗 |
Environmental testing - Test methods - Test Ke - Flowing mixed gas corrosion test |
| BS EN 60068-2-61-1994 |
環境試驗.第2部分:試驗.第61節:試驗2/ABDM.氣候順序 |
Environmental testing - Test methods - Test Z/ABDM - Climatic sequence |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com