標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 9241-4 Berichtigung 1-2002 |
DIN EN ISO 9241-4:1999 勘誤 |
Corrigenda to DIN EN ISO 9241-4:1999; German version EN ISO 9241-4:1998/AC:2000 |
| DIN EN ISO 9241-4-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第4部分:鍵盤要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements for visual display terminals (ISO 9241-4:1998); German version EN ISO 9241-4:1998 |
| DIN EN ISO 9241-5-1999 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第5部分:工作臺布置及人體姿勢的要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998); German version EN ISO 9241-5:1999 |
| DIN EN ISO 9241-6-2001 |
具有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第6部分:工作環境導則 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999); German version EN ISO 9241-6:1999 |
| DIN EN ISO 9241-7-1998 |
帶有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.第7部分:顯示及其相關的反射性要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998); German version EN ISO 9241-7:1998 |
| DIN EN ISO 9241-8-1998 |
用屏幕終端的辦公室工作的人類工效學要求.第8部分:彩色顯示的要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997); German version EN ISO 9241-8:1997 |
| DIN EN ISO 9241-9-2002 |
用視覺顯示終端辦公的人類工效學要求.第9部分:非鍵盤輸入設備要求(ISO 9241-9:2000) |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000); German version EN ISO 9241-9:2001 |
| DIN EN ISO 9251-1996 |
熱絕緣.材料的熱傳導條件和性能.術語 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987); German version EN ISO 9251:1995 |
| DIN EN ISO 9283-1999 |
操縱工業機器人.性能參數和相關試驗方法 |
Manipulating industrial robots - Performance criteria and related test methods (ISO 9283:1998); German version EN ISO 9283:1998 |
| DIN EN ISO 9288-1996 |
熱絕緣.散熱傳遞.物理的量值和定義 |
Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989); German version EN ISO 9288:1996 |
| DIN EN ISO 9289-1995 |
油料種子殘渣.游離殘留乙烷測定 |
Oilseed residues - Determination of free residual hexane (ISO 9289:1991); German version EN ISO 9289:1995 |
| DIN EN ISO 9300-1995 |
用文杜利臨界流量噴嘴測定氣體流量 |
Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:1990); German version EN ISO 9300:1995 |
| DIN EN ISO 9300-2005 |
用文杜利臨界流量噴嘴測量氣體流量 |
|
| DIN EN ISO 9308-1-2001 |
水質.大腸桿菌和大腸桿菌類的檢測與計數.第1部分:膜過濾法 |
Water quality - Detection and enumeration of Escherichia coli coliform bacteria - Part 1: Membrane filtration method (ISO 9308-1:2000); German version EN ISO 9308-1:2000 |
| DIN EN ISO 9308-3-1999 |
水質.表面水和廢水中大腸桿菌和大腸桿菌類的驗證和計數.第3部分:通過液體介質中接種的微型法 |
Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium (ISO 9308-3:1998); German version EN ISO 9308-3:1998 |
| DIN EN ISO 9311-1-2005 |
熱塑管道系統用膠粘劑.第1部分:膠粘膜特性的測定 |
|
| DIN EN ISO 9311-2-2002 |
熱塑管道系統用的膠粘計.第2部分:剪切強度的測定 |
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002); German version EN ISO 9311-2:2002 |
| DIN EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 |
|
| DIN EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 |
|
| DIN EN ISO 9311-3-2005 |
熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 |
|
| DIN EN ISO 9312-1995 |
電阻焊設備.電極擋塊的絕緣柱 |
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990); German version EN ISO 9312:1994 |
| DIN EN ISO 9337-1-2000 |
接觸鏡片.后屈光度的測定.第1部分:使用聚焦儀的手工方法 |
Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing (ISO 9337-1:1999); German version EN ISO 9337-1:2000 |
| DIN EN ISO 9337-2-2004 |
接觸鏡片.后屈光度的測定.第2部分:在鹽中浸漬的接觸鏡片的測量 |
|
| DIN EN ISO 9338-1998 |
光學和光學儀器.接觸鏡片.直徑的測定 |
Optics and optical instruments - Contact lenses - Determination of the diameters (ISO 9338:1996); German version EN ISO 9338:1998 |
| DIN EN ISO 9339-1-1998 |
光學及光學儀器.接觸鏡片.厚度測定.第1部分:直接接觸鏡片 |
Optics and optical instruments - Contact lenses; Determination of the thickness - Part 1: Rigid contact lenses (ISO 9339-1:1996); German version EN ISO 9339-1:1998 |
| DIN EN ISO 9339-2-1998 |
光學和光學儀器.接觸鏡片.厚度測定.第2部分:水凝膠接觸鏡片 |
Optics and optical instruments - Contact lenses; determination of thickness - Part 2: Hydrogel contact lenses (ISO 9339-2:1998); German version EN ISO 9339-2:1998 |
| DIN EN ISO 9340-1998 |
光學及光學儀器.接觸鏡片.直接接觸鏡片的應力測定 |
Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses (ISO 9340:1996); German version EN ISO 9340:1998 |
| DIN EN ISO 9341-1998 |
光學及光學儀器.接觸鏡片.形狀穩定的接觸鏡片中雜質和表面缺陷的測定 |
Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses (ISO 9341:1996); German version EN ISO 9341:1998 |
| DIN EN ISO 9342-1998 |
光學和光學儀器.焦距計校正用檢驗透鏡 |
Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996); German version EN ISO 9342:1998 |
| DIN EN ISO 9346-1996 |
熱絕緣.質量傳遞.物理量值和定義 |
Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987); German version EN ISO 9346:1996 |
| DIN EN ISO 9360-1-2000 |
麻醉和呼吸設備.人體中增濕呼吸氣體用熱與濕度交換器(HMEs).第1部分:250ml最小呼吸氣容積的HMEs |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000); German version EN ISO 9360-1:2000 |
| DIN EN ISO 9360-2-2003 |
麻醉和呼吸設備.使人體呼吸氣體增濕的熱和潮氣交換器(HMEs).第2部分:潮氣量最小為250ml的氣管造口病人用熱和潮氣交換器 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001); German version EN ISO 9360- |
| DIN EN ISO 9363-1-1999 |
光學和光學儀器.接觸鏡片.接觸鏡片材料致癌性的測定.第1部分:瓊脂涂蓋試驗和生長抑制試驗 |
Optics and optical instruments - Contact lenses; determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994); German version EN ISO 9363-1:1999 |
| DIN EN ISO 9377-2-2001 |
水質.油氣指數的測定.第2部分:溶劑萃取法和氣相色譜法 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000); German version EN ISO 9377-2:2000 |
| DIN EN ISO 9391-1995 |
水質.宏無脊椎生物的深水取樣.菌落使用導則 |
Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993); German version EN ISO 9391:1995 |
| DIN EN ISO 9394-1998 |
眼科光學.接觸鏡片和接觸鏡片護理制品.通過兔眼視覺研究測定生物適合性 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:1998); German version EN ISO 9394:1998 |
| DIN EN ISO 9396-2001 |
塑料.酚醛樹脂.用自動裝置測定在特別條件下甲階酚醛樹脂的膠凝時間 |
Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000 |
| DIN EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9397-1997 |
塑料.酚醛樹脂.游離甲醛含量的測定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9400-1995 |
鎳基合金.抗晶間腐蝕性的測定 |
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990); German version EN ISO 9400:1995 |
| DIN EN ISO 9408-1999 |
水質.使用在封閉的呼吸測定計中需氧測定的方法評定有機化合物在水介質中的最大需氧生物降解能力 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999); German version EN ISO 9408:1999 |
| DIN EN ISO 9409-1-1997 |
工業機器人.機械接口.第1部分:板(A型) |
Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A) (ISO 9409-1:1996); German version EN ISO 9409-1:1996 |
| DIN EN ISO 9409-1-2004 |
操作型工業機器人.機械接口.第1部分:板 |
|
| DIN EN ISO 9409-2-1997 |
工業機器人.機械接口.第2部分:柄(A型) |
Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (form A) (ISO 9409-2:1996); German version EN ISO 9409-2:1996 |
| DIN EN ISO 9439-2000 |
水質.液體介質中有機化合物最大好氣菌生物降解性的評價.二氧化碳評價試驗 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999); German version EN ISO 9439:2000 |
| DIN EN ISO 945-1994 |
鑄鐵.石墨顯微結構的表示方法 |
Cast iron - Designation of microstructure of graphite (ISO 945:1975); German version EN ISO 945:1994 |
| DIN EN ISO 9454-2-2000 |
軟釬焊劑.分類和要求.第2部分:性能要求 |
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998); German version EN ISO 9454-2:2000 |
| DIN EN ISO 9455-10-2000 |
軟釬焊劑.試驗方法.第10部分:助熔劑功效試驗.焊料展開法 |
Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method (ISO 9455-10:1998); German version EN ISO 9455-10:2000 |
| DIN EN ISO 9455-12-1994 |
軟釬劑.試驗方法.第12部分:鋼管腐蝕試驗 |
Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992); German version EN ISO 9455-12:1994 |
| DIN EN ISO 9455-13-1999 |
軟釬焊劑.檢驗方法.第13部分:焊劑飛濺量的測定 |
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996); German version EN ISO 9455-13:1999 |
| DIN EN ISO 9455-15-1999 |
軟釬焊劑.檢驗方法.第15部分:銅腐蝕檢驗 |
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996); German version EN ISO 9455-15:1999 |
| DIN EN ISO 9455-16-2001 |
軟釬焊助熔劑.試驗方法.第16部分:助熔劑功效試驗.濕平衡法 |
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998); German version EN ISO 9455-16:2001 |
| DIN EN ISO 9455-2-1995 |
軟釬焊劑.試驗方法.第2部分:不揮發物的測定.沸點計法 |
Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993); German version EN ISO 9455-2:1995 |
| DIN EN ISO 9455-3-1994 |
軟釬焊劑.試驗方法.第3部分:酸值測定.電勢法和目測滴定法 |
Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:1992); German version EN ISO 9455-3:1994 |
| DIN EN ISO 9455-6-1997 |
軟釬焊劑.試驗方法.第6部分:鹵化物含量的測定和驗證(除了氟化物外) |
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995); German version EN ISO 9455-6:1997 |
| DIN EN ISO 9455-9-1995 |
軟釬焊劑.試驗方法.第9部分:氨含量測定 |
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:1993); German version EN ISO 9455-9:1995 |
| DIN EN ISO 9456-1996 |
光學和光學儀器.眼科光學.眼鏡架標志 |
Optics and optical instruments - Ophthalmic optics - Marking of spectacle frames (ISO 9456:1991); German version EN ISO 9456:1996 |
| DIN EN ISO 9488-2001 |
太陽能.詞匯 |
Solar energy - Vocabulary (ISO 9488:1999); Trilingual version EN ISO 9488:1999 |
| DIN EN ISO 9509-1995 |
水質.通過化學藥品和污水對活性污泥中微生物硝酸化抑制作用的鑒定方法 |
Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989); German version EN ISO 9509:1995 |
| DIN EN ISO 9513 Bb.1-2003 |
金屬材料.單軸向試驗用伸長儀的校正.機械伸長儀的樣品及其校正 |
Metallic materials - Calibration of extensometers used in uniaxial testing - Examples for mechanical extensometers and their calibration |
| DIN EN ISO 9513 Bb.2-2005 |
金屬材料.單軸向試驗用伸長計的校準.激光伸長計系統及其校準 |
|
| DIN EN ISO 9513 Bb.2-2005 |
金屬材料.單軸向試驗用伸長計的校準.激光伸長計系統及其校準 |
|
| DIN EN ISO 9513 Bb.3-2005 |
金屬材料.單軸向試驗用伸長計的校準.視頻伸長計系統及其校準 |
|
| DIN EN ISO 9513 Bb.3-2005 |
金屬材料.單軸向試驗用伸長計的校準.視頻伸長計系統及其校準 |
|
| DIN EN ISO 9513-2003 |
金屬材料.單軸向試驗用伸長儀的校正 |
Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999); German version EN ISO 9513:2002 |
| DIN EN ISO 9514-1994 |
色漆和清漆.液態適用期測定.樣品的制備和狀態調節以及試驗指南 |
Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:1992); German version EN ISO 9514:1994 |
| DIN EN ISO 9514-2005 |
色漆和清漆.多組分涂覆系統適用期測定.樣品的制備和處理以及試驗指南 |
|
| DIN EN ISO 9554-2005 |
纖維繩索.一般規范 |
|
| DIN EN ISO 9554-2005 |
纖維繩索.一般規范 |
|
| DIN EN ISO 9556-2002 |
鋼鐵.含碳總量的測定.感應電爐燃燒紅外線吸收法 |
Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001 |
| DIN EN ISO 9562-2005 |
水質.可吸附鹵素(AOX)的測定 |
|
| DIN EN ISO 960-1998 |
塑料.聚酰胺(PA).含水量測定 |
Plastics - Polyamides (PA) - Determination of water content (ISO 960:1988); German version EN ISO 960:1997 |
| DIN EN ISO 9606-3-1999 |
焊工考試.熔焊.第3部分:銅和銅合金 |
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999); German version EN ISO 9606-3:1999 |
| DIN EN ISO 9606-4-1999 |
焊工合格檢驗.熔焊.第4部分:鎳和鎳合金 |
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9696-4:1999); German version EN ISO 9606-4:1999 |
| DIN EN ISO 9606-5-2000 |
焊工考試.熔焊.第5部分:鈦和鈦合金、鋯和鋯合金 |
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000); German version EN ISO 9606-5:2000 |
| DIN EN ISO 9614-1-1995 |
聲學.利用聲音強度測定噪聲源功率級.第1部分:離散點測量 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993); German version EN ISO 9614-1:1995 |
| DIN EN ISO 9614-2-1996 |
聲學.利用聲音強度測定噪聲源功率級.第2部分:掃描測量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996); German version EN ISO 9614-2:1996 |
| DIN EN ISO 9614-3-2003 |
聲學.利用聲音強度測定噪聲源聲功率級.第3部分:掃描測量精度法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002); German version EN ISO 9614-3:2002 |
| DIN EN ISO 9626-2002 |
醫療器械制造用不銹鋼針狀管材 |
Stainless steel needle tubing for manufacture of medical devices (ISO 9626:1991 + AMD 1:2001) (including amendment A1:2001); German version EN ISO 9626:1995 + A1:2001 |
| DIN EN ISO 9653-2000 |
膠粘劑.粘合劑的剪切沖擊強度的試驗方法 |
Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998); German version EN ISO 9653:2000 |
| DIN EN ISO 9664-1995 |
粘合劑.拉伸剪切結構膠粘劑疲勞性能的試驗方法 |
Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993); German version EN ISO 9664:1995 |
| DIN EN ISO 9665-2000 |
粘合劑.動物膠.取樣和試驗方法 |
Adhesives - Animal glues - Methods for sampling and testing (ISO 9665:1998); German version EN ISO 9665:2000 |
| DIN EN ISO 9680-1996 |
牙科設備.牙科手術燈 |
Dental equipment - Dental operating light (ISO 9680:1993, including Technical Corrigendum 1:1995); German version EN ISO 9680:1996 |
| DIN EN ISO 9687-1995 |
牙科設備.圖形符號 |
Dental equipment - Graphical symbols (ISO 9687:1993); German version EN ISO 9687:1995 |
| DIN EN ISO 9692-1-2004 |
焊接和相關工藝.接口準備的建議.第1部分:鋼的手工金屬弧焊接、氣體保護金屬弧焊接、氣焊、TIG焊接和縫焊 |
|
| DIN EN ISO 9692-2-1999 |
焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊 |
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999 |
| DIN EN ISO 9692-3-2001 |
焊接和相關工藝.焊縫準備的推薦方法.第3部分:鋁和鋁合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊 |
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding und tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2001); German version EN ISO 9692-3:2001 |
| DIN EN ISO 9693-2000 |
牙科陶瓷與金屬修補材料的熔合 |
Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000 |
| DIN EN ISO 9694-1999 |
牙科用磷酸酯粘結鑄造包埋材料 |
Dental phosphate-bonded casting investments (ISO 9694:1996); German version EN ISO 9694:1998 |
| DIN EN ISO 9702-1998 |
塑料.環氧氨硬化劑.對第1,2,3氨組含氮量的測定 |
Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996); German version EN ISO 9702:1998 |
| DIN EN ISO 9703-3-1998 |
麻醉和人工呼吸用警報信號.第3部分:警報使用指南 |
Anaesthesia and respiratory care alarm signals - Part 3: Guidance on application of alarms (ISO 9703-3:1998); German version EN ISO 9703-3:1998 |
| DIN EN ISO 9707-1995 |
信息和文獻.圖書、報紙、期刊和電子出版物的生產和銷售的統計方法 |
Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications (ISO 9707:1991); German version EN ISO 9707:1994 |
| DIN EN ISO 9713-2004 |
神經外科植入物.自鎖顱內動脈瘤夾鉗 |
|
| DIN EN ISO 9771-1997 |
塑料.酚醛樹.測定可溶酚醛樹在酸性條件下的反應性 |
Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997 |
| DIN EN ISO 9773-1998 |
塑料.立式軟薄試樣與小火焰源接觸燃燒性能的測定 |
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998); German version EN ISO 9773:1998 |
| DIN EN ISO 9773-2004 |
塑料.立式軟薄試樣與小火焰源接觸的燃燒性能測定 |
(Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003) |
| DIN EN ISO 9773-2004 |
塑料.立式軟薄試樣與小火焰源接觸的燃燒性能測定 |
|
| DIN EN ISO 9785-2002 |
船舶和海上技術.裝有內燃機驅動裝置的貨艙的通風.氣流總需量的理論計算 |
Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required (ISO 9785:2002); German version EN ISO 9785:2002 |
| DIN EN ISO 9787-2000 |
操縱工業機器人.坐標系和運動 |
Manipulating industrial robots - Coordinate systems and motion nomenclatures (ISO 9787:1999); German version EN ISO 9787:1999 |
| DIN EN ISO 9801-1999 |
眼科儀器.測試箱鏡頭 |
Ophthalmic instruments - Trial case lenses (ISO 9801:1997); German version EN ISO 9801:1999 |
| DIN EN ISO 9831-2004 |
動物飼料、動物產品和糞便或尿液.總熱值的測定.彈式量熱計法 |
(Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998); German version EN ISO 9831:2003) |
| DIN EN ISO 9831-2004 |
動物飼料、動物產品和糞便或尿液.總熱值的測定.彈式量熱計法 |
|
| DIN EN ISO 9832-2000 |
動植物脂肪和油.殘留技術上的己烷含量測定 |
Animal and vegetable fats and oils - Determination of residual technical hexane content (ISO 9832:1992, including Amendment 1:1998); German version EN ISO 9832:2000 |
| DIN EN ISO 9856-1995 |
輸送帶.彈性模數的測定 |
Conveyor belts - Determination of elastic modulus (ISO 9856:1989); German version EN ISO 9856:1995 |
| DIN EN ISO 9856-2004 |
輸送帶.彈性和固定伸長度的測定及彈性模量的計算 |
|
| DIN EN ISO 9862-2005 |
土工合成織物.試樣的取樣和制備 |
|
| DIN EN ISO 9862-2005 |
土工合成織物.試樣的取樣和制備 |
|
| DIN EN ISO 9863-1-2005 |
土工合成織物.特定壓力下厚度的測定.第1部分:單層 |
|
| DIN EN ISO 9863-1-2005 |
土工合成織物.特定壓力下厚度的測定.第1部分:單層 |
|
| DIN EN ISO 9863-2-1996 |
土工織物和相關產品.特定壓力下厚度的測定.第2部分:多層制品的單層厚度測定方法 |
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996); German version EN ISO 9863-2:1996 |
| DIN EN ISO 9864-2005 |
土工合成織物.土工織物和相關產品每單位面積質量測定的試驗方法 |
|
| DIN EN ISO 9864-2005 |
土工合成織物.土工織物和相關產品每單位面積質量測定的試驗方法 |
|
| DIN EN ISO 9873 Berichtigung 1-2001 |
DIN EN ISO 9873:2000-07的勘誤 |
Corrigenda to DIN EN ISO 9873:2000-07 (EN ISO 9873:2000/AC:2000) |
| DIN EN ISO 9873-2000 |
可重復使用的金屬牙科鏡和牙鉆手柄 |
Dental hand instruments - Reusable mirrors and handles (ISO 9873:1998); German version EN ISO 9873:2000 |
| DIN EN ISO 9875-2002 |
船舶和航海技術.航海用回聲設備 |
Ships and marine technology - Marine echo-sounding equipment (ISO 9875:2000); German version EN ISO 9875:2001 |
| DIN EN ISO 9876-1999 |
船舶和航海技術.氣象圖用航海傳真接收機 |
Ships and marine technology - Marine facsimile receivers for meteorological charts (ISO 9876:1997); German version EN ISO 9876:1998 |
| DIN EN ISO 9886-2002 |
用生理測量法評定熱應變 |
Evaluation of thermal strain by physiological measurements (ISO 9886:1992); German version EN ISO 9886:2001 |
| DIN EN ISO 9886-2004 |
人類工效學.熱疲勞的生理學測量評價 |
|
| DIN EN ISO 9887-1994 |
水質.含水介質中有機物化合物需氧生物降解性的評定.半連續激活污泥法(SCAS) |
Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992); German version EN ISO 9887:1994 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com