標準號 |
中文名稱 |
英文名稱 |
| EN 2832-1993 |
航空航天系列鋼的氫（蝕致）脆性V切口試件試驗 |
Aerospace series - Hydrogen embrittlement of steels - Notched specimen test |
| EN 28339-1990 |
房層建筑 連接件 密封件 拉伸性能的測定 |
Building construction - Jointing products - Sealants - Determination of tensile properties (ISO 8339:1984) |
| EN 28340-1990 |
房層建筑 連接件 密封件 延伸狀態的拉伸性能測定 |
Building construction Jointing products - Sealants; Determination of tensile properties at maintained extension (ISO 8340:1984) |
| EN 28343-1991 |
鎳鐵 硅含量的測定 重量法 |
Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985) |
| EN 28362-1-1993 |
注射容器及附件 第1部分：玻璃管注射瓶 |
Injection containers for injectables and accessories; part 1: injection vials made of glass tubing (ISO 8362-1:1989) |
| EN 28362-2-1993 |
注射劑用注射器容器及附件 第2部分：注射瓶塞 |
Injection containers for injectables and accessories; Part 2: Closures for injection vials (ISO 8362-2:1988) |
| EN 28362-4-1993 |
注射劑用注射器容器及附件 第4部分：模制玻璃注射瓶 |
Injection containers for injectables and accessories; Part 4: Injection vials made of moulded glass (ISO 8362-4:1989) |
| EN 28394-1990 |
房層建筑 連接件 單個密封件可擠壓性的測定 |
Building construction - Jointing products - Determination of extrudability of one-component sealants (ISO 8394:1988) |
| EN 284-1992 |
交換體 C級交換體 尺寸和一般要求 |
Swap bodies; swap bodies of class C; dimensions and general requirements |
| EN 28430-1-1992 |
電阻點焊 電極夾具 第1部分：錐形接頭錐度1:10 |
Resistance spot welding- Electrode holders- Part 1: Taper fixing 1:10 (ISO 8430-1:1988) |
| EN 28430-2-1992 |
電阻點焊 電極夾具 第2部分：莫氏裝配錐度 |
Resistance spot welding- Electrode holders- Part 2: Morse taper fixing (ISO 8430-2:1988) |
| EN 28430-3-1992 |
電阻點焊 電極夾具 第3部分：未端推入固定的平行裝配 |
Resistance spot welding- Electrode holders- Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988) |
| EN 28474-1992 |
包裝 滿裝的運輸包裝 浸水試驗 |
Packaging; complete, filled transport packages; water immersion test (ISO 8474:1986) |
| EN 2851-1992 |
航空航天系列除發動機外的零部件和組件的標志圖紙上標記 |
Aerospace series; Marking of parts and assemblies other than engines; Indications on drawings |
| EN 28510-1-1993 |
粘合劑 軟質和硬質粘合試樣組件的剝離試驗 第1部分：90°剝離 |
Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90 °peel (ISO 8510-1:1990) |
| EN 28510-2-1993 |
粘合劑 軟質和硬質粘合試樣組件的剝離試驗 第2部分：.180°剝離 |
Adhesives - Peel test for a flexible - bonded - to - rigid test specimen assembly - Part 2: 180 °peel (ISO 8510-2:1990) |
| EN 2859-1995 |
航空航天系列鍍鎘合金鋼制標準六角頭緊公差普通柄短螺紋螺栓等級：1100 MPa (環境溫度)/235℃ |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 286-1-1998 |
裝空氣或氮氣的簡單不著火的壓力容器 第1部分：一般用途壓力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes |
| EN 286-2-1992 |
裝空氣或氮氣的簡單不著火的壓力容器 第2部分：機動車及其拖車氣動剎車和輔助系統用壓力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen; part 2: pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| EN 286-3-1994 |
裝空氣或氮氣的簡單不著火的壓力容器 第3部分：鐵路運輸車輛氣動剎車設備和輔助氣動設備用的鋼制壓力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 286-4-1994 |
裝空氣或氮氣的簡單不著火的壓力容器 第4部分：鐵路運輸車輛氣動剎車設備和輔助氣動設備用的鋁合金壓力容 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 28601-1992 |
數據和交換格式 信息交換 時間和日期的表示 |
Data elements and interchange formats - Information interchange; representation of dates and times (ISO 8601:1988 and technical corrigendum 1:1991) |
| EN 28653-1992 |
首飾 戒指尺寸 定義、測量和標記 |
Jewellery; ring sizes; definition, measurement and designation (ISO 8653:1986) |
| EN 28654-1992 |
金合金顏色 定義、顏色范圍和標記 |
Colours of gold alloys - Definition, range of colours and designation (ISO 8654:1987) |
| EN 28659-1990 |
熱塑性塑料閥門 疲勞強度 試驗方法 |
Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989) |
| EN 28662-1-1992 |
便攜式手提動力工具 手柄振動測量 第1部分：總則 |
Hand-held portable power tools; Measurement of vibrations at the handle; Part 1: General (ISO 8662-1:1988) |
| EN 28692-1993 |
水質 用綠藻類柵薄屬和月牙藻屬進行的淡水藻類生長抑制試驗 |
Water quality; Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8692:1989) |
| EN 28736-1992 |
不淬硬內螺紋圓錐銷 |
Taper pins with internal thread, unhardened (ISO 8736:1986) |
| EN 28737-1992 |
不淬硬外螺紋圓錐銷 |
Taper pins with external thread, unhardened (ISO 8737:1986) |
| EN 28738-1992 |
叉桿銷用平墊圈 產品等級A級 |
Plain washers for clevis pins; product grade A (ISO 8738:1986) |
| EN 28749-1992 |
銷和槽銷 剪切試驗 |
Pins and grooved pins; shear test (ISO 8749:1986) |
| EN 28768-1992 |
包裝 滿裝的運輸包裝 倒侄塌試驗 |
Packaging; complete, filled transport packages; toppling test (ISO 8768:1986) |
| EN 288-5-1994 |
金屬材料焊接程序規范和鑒定 第5部分：使用已被認可的焊接耗材對電弧焊的鑒定 |
Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding |
| EN 288-6-1994 |
金屬材料焊接程序規范和鑒定 第6部分：有關以前經驗的鑒定 |
Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience |
| EN 288-7-1995 |
金屬材料焊接程序規范和鑒定 第7部分：使用標準焊接程序的電弧焊的鑒定 |
Specification and approval of welding procedures for metallic materials - Part 7: Approval by a standard welding procedure for arc welding |
| EN 288-8-1995 |
金屬材料焊接程序規范和鑒定 第8部分：用預焊接試驗進行鑒定 |
Specification and approval of welding procedures for metallic materials - Part 8: Approval by a pre-production welding test |
| EN 288-9-1999 |
金屬材料焊接程序規范和鑒定 第9部分：傳輸管道陸地和海上場所對接焊中管道焊接用焊接程序試驗 |
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| EN 28839-1991 |
緊固件機械性能 有色金屬制造螺栓、螺釘、螺柱和螺母 |
Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986) |
| EN 2884-1996 |
航空航天系列用MoS2潤滑陽極氧化鈦合金制短螺紋松公差普通柄偏置十字盤形頭凹槽螺釘?shù)燃墸?100 MPa (環 |
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 28847-1989 |
小艇 操舵裝置 鋼索及滑輪系統 |
Small craft; steering gear; wire rope and pulley systems (ISO 8847:1987) |
| EN 2885-1996 |
航空航天系列 鍍鎘合金鋼制短螺紋松公差退柄偏置十字盤頭凹槽螺釘?shù)燃墸?00MPa(環境溫度)/235℃ |
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2886-1996 |
航空航天系列 鍍鎘合金鋼偏置十字凹槽緊公差普通柄短螺紋螺釘?shù)燃墸?900MPa(環境溫度)/235℃ |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2887-1995 |
航空航天系列 鈍化耐腐蝕鋼標準六角頭螺全紋頭螺栓等級： 600 MPa( 環境溫度)/425 ℃ |
Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ℃ |
| EN 2888-1995 |
航空航天系列鈍純化耐腐蝕鋼標準六角頭緊公差普通柄短螺紋螺栓等級： 600 MPa(環境溫度)/425 ℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
| EN 2889-1995 |
航空航天系列 鍍鎘合金鋼標準六角頭緊公差普通柄短螺紋螺栓等級：900MPa (環境溫度)/235℃ |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ℃ |
| EN 289-1993 |
橡膠和塑料機械 壓制和傳遞模制壓力機 設計的安全要求 |
Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design |
| EN 289-2004 |
橡膠和塑料加工機械.壓力機.安全要求 |
|
| EN 28960-1993 |
冷藏箱 家用和類似用途冷凍食品儲藏柜和食品冷凍柜空氣噪聲的測量 |
Refrigerators, frozen-food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991) |
| EN 2897-1996 |
航空航天系列 鍍鎘合金鋼制盤頭偏置十字凹槽緊公差普通柄短螺紋螺釘 等級：1100MPa(環境溫度)/235℃ |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ℃ |
| EN 28970-1991 |
木材結構 機械緊固件接頭的試驗 對木材密度要求 |
Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989) |
| EN 28996-1993 |
人類工效學 代謝熱量的測定 |
Ergonomics; Determination of metabolic heat production (ISO 8996:1990) |
| EN 29008-1994 |
玻璃瓶 垂直度 試驗方法 |
Glass bottles; verticality; test method (ISO 9008:1991) |
| EN 29009-1994 |
玻璃容器 以容器底作基準的瓶口高度和不平行度 試驗方法 |
Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991) |
| EN 29046-1990 |
房層建筑 密封膠 恒溫下粘合性能的測定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties at constant temperatures (ISO 9046:1987) |
| EN 29048-1990 |
房屋建筑 連接件 標準件上密封穩定性的測定 |
Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987) |
| EN 29052-1-1992 |
聲學 動力勁度的測定 第1部分：住宅用浮筑地板材料 |
Acoustics - Determination of dynamics stiffness - Part 1: Materials used under floating floors in dwellings |
| EN 29053-1993 |
聲學 吸聲材料 流阻的測定 |
Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991) |
| EN 2906-1994 |
航空航天系列FE-PA92HT(A 286)耐熱鋼十二角頭自鎖螺母等級：1100MPa(環境溫度)/650C° |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 2907-1995 |
航空航天系列鍍銀FE-PA92HT(A286)耐熱鋼自鎖十二頭螺母等級：1100MPa (環境溫度)/650℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 29073-1-1992 |
紡織品 非織造布的試驗方法 第1部分：單位面積質量的測定 |
Textiles; test methods for nonwovens; part 1: determination of mass per unit area |
| EN 29073-3-1992 |
紡織品 非織造布的試驗方法 第3部分：斷裂強度和伸長的測定 |
Textiles; test methods for nonwovens; part 3: determination of tensile strength and elongation |
| EN 2908-1994 |
航空航天系列FE-PA92HT(A 286)耐熱鋼十二角頭自鎖深鏜孔螺母等級：1100MPa(環境溫度)/650C° |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 2909-1995 |
航空航天系列鍍銀FE-PA92HT(A286)耐熱鋼制自鎖深鏜孔十二角頭螺母等級：1100MPa（環境溫度）/650℃ |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 29090-1992 |
氣焊以相關工藝用設備的氣密特性 |
Gas tightness of equipment for gas welding and allied processes (ISO 9090:1989) |
| EN 29092-1992 |
紡織品 非織造布 定義 |
Textiles-Nonwovens-Definition |
| EN 2910-1994 |
航空航天系列FE-PA92HT(A 286)耐熱鋼自鎖柄螺母等級：1100MPa(環境溫度)/650C° |
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 29104-1993 |
封閉管道中流體流量測量 液體電磁流量計性能評定方法 |
Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991) |
| EN 2911-1995 |
航空航天系列鍍銀FE-PA92HT(A286)耐熱鋼制自鎖柄螺母等級：1100MPa（環境溫度）/650℃ |
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 29117-1992 |
色漆和清漆 貫穿干燥狀態和貫穿干燥時間 試驗方法 |
Paints and varnishes - Determination of through-dry state and through-dry time - Method of test (ISO 9117:1990) |
| EN 2912-1996 |
航空航天系列陽極氧化或鉻酸鹽處理鋁合金制大直徑平墊圈 |
Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| EN 2913-1999 |
航空航天系列鍍鎘鋼制大直徑平墊圈 |
Aerospace series - Washers, flat, large diameter, in steel, cadmium plated |
| EN 2914-1996 |
航空航天系列鈍化耐熱鋼制大直徑平墊圈 |
Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated |
| EN 29168-1994 |
手持式牙科器械 軟管連接件 |
Dental handpieces - Hose connectors (ISO 9168:1991) |
| EN 292-1-1991 |
機械安全 設計用的基本概念、一般原則 第1部分：基本術語、方法論 |
Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology |
| EN 29202-1992 |
首飾 貴金屬合金的純度 |
Jewellery - Fineness of precious metall alloys (ISO 9202:1991) |
| EN 29241-2-1993 |
辦公用視覺顯示終端（VDTs）的人類工效學要求 第2部分：任務要求指南 |
Ergonomic requirements for office work with visual display terminals (VDTs); Part 2: guidance on task requirements (ISO 9241-2:1992) |
| EN 2925-1994 |
航空航天系列FE-PA92HT(A286)耐高溫鋼制長螺紋細柄雙六角頭螺栓等級：900MPa(環境溫度)650℃ |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 2926-1996 |
航空航天系列FE-FA92HT(A286)耐熱鋼制鍍銀長螺紋細柄雙六角頭螺釘?shù)燃墸?900 MPa(環境溫度)/650℃ |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 2927-1996 |
航空航天系列NI-P100HT(Inconel 718)耐熱鎳基合金制長螺紋細柄雙六角頭螺釘?shù)燃墸?275 MPa(環境溫度)/6 |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 2928-1996 |
航空航天系列NI-P100HT(Inconel 718)耐熱鎳基合金制鍍銀長螺紋細柄雙六角頭螺釘?shù)燃墸?275 MPa(環境溫 |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 2929-1996 |
航空航天系列NI-P100HT(一種耐熱鎳基合金)耐熱鎳基合金制長螺紋細柄雙六角頭螺釘?shù)燃墸?210 MPa(環境溫 |
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃ |
| EN 29295-1991 |
聲學 計算機和辦公室設備噪聲發射的高頻噪聲的測量 |
Acoustics; Measurement of high-frequency noise emitted by computer and business equipment (identical with ISO 9295:1988) |
| EN 293-1992 |
油壓噴霧噴嘴 最低要求 測試 |
Oil pressure atomizing nozzles; minimum requirements; testing |
| EN 2930-1996 |
航空航天系列NI-P101HT(Waspaloy 一種耐高溫熱鎳基合金)耐熱鎳基合金鍍銀長螺紋細柄雙六角頭螺釘?shù)燃墸?/td>
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃ |
| EN 2931-1994 |
航空航天系列FE-PA92HT(A286)耐熱鋼制長螺紋細柄T形頭螺栓等級：900MPa(環境溫度)650℃ |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ℃ |
| EN 29313-1992 |
電阻點焊設備 冷卻管 |
Resistance spot welding equipment- Cooling tubes (ISO 9313:1989) |
| EN 2932-1996 |
航空航天系列FE-PA92HT(A286)耐熱鋼鍍銀長螺紋細螺柄T形頭螺栓級等： 900 MPa(環境溫度)/650℃ |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃ |
| EN 2933-1996 |
航空航天系列NI-P100HT718)耐熱鎳基合金鍍銀長螺紋細螺柄T形頭螺栓等級：1275 MPa(環境溫度)/650℃ |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
| EN 29333-1991 |
牙科上光材料 |
Dental brazing materials (ISO 9333:1990) |
| EN 2934-1996 |
航空航天系列合金NI-P100HT((鉻鎳鐵合金718)耐熱鎳基鍍銀長螺紋細螺柄T形頭螺栓等級：1275 MPa(環境溫 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
| EN 2935-1996 |
航空航天系列NI-P101HT(沃斯帕洛尹合金)耐熱鎳基合金鍍銀長螺紋細螺柄T形頭螺栓等級：1210 MPa(環境溫 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 2936-1996 |
航空航天系列合金NI-P101HT(沃斯帕洛尹合金)耐熱鎳基鍍銀長螺紋細螺柄T形頭螺栓等級：1210 MPa(環境溫 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 29367-2-1994 |
海運道路車輛捆綁和固定裝置 一般要求 第2部分：半掛車 |
Lashing and securing arrangements on road vehicles for sea transportation - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994) |
| EN 2937-1994 |
航空航天系列FE-PA92HT(A286)耐熱鋼全螺紋六角頭螺釘?shù)燃墸?00MPa(環境溫度) 650℃ |
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 2938-1995 |
航空航天系列鍍銀FE-PA92HT(A286)耐熱鋼制全螺紋六角頭螺釘?shù)燃墸?00MPa(環境溫度)/650℃ |
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 2939-1994 |
航空航天系列FE-PA92HT(A 286)耐熱鋼100度埋頭偏置十字凹槽全螺紋螺釘?shù)燃墸?00MPa(環境溫度)/650C° |
Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 294-1992 |
機械安全 避免上肢可到達危險區域的安全距離 |
Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs |
| EN 2940-1995 |
航空航天系列鍍銀FE-PA92HT(A286)耐熱鋼制全螺紋偏置十字凹槽100度沉頭螺釘?shù)燃墸?00 MPa(環境溫度)/65 |
Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃ |
| EN 2942-1998 |
航空航天系列NI-PH2801(鉻鎳鐵合金X750)耐熱鎳基合金鍍銀螺旋形自鎖式螺紋插件 |
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated |
| EN 2943-1998 |
航空航天系列自鎖螺旋線圈螺紋式插件技術規范 |
Aerospace series - Inserts, screw thread, helical coil, self locking - Technical specification |
| EN 2944-1998 |
航空航天系列FE-PA3004耐腐蝕鋼螺旋形線圈自鎖式螺紋插件 |
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 |
| EN 2945-1998 |
航空航天系列螺旋形線圈自鎖螺紋插件組裝程序 |
Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure |
| EN 29453-1993 |
軟釬料合金 化學成分和形式 |
Soft solder alloys; chemical compositions and forms (ISO 9453:1990) |
| EN 29454-1-1993 |
軟釬焊劑 分類和要求 第1部分：.分類、標記和包裝 |
Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990) |
| EN 29455-1-1993 |
軟釬焊劑 試驗方法 第1部分：不揮發物質的測定 重量法 |
Soft soldering fluxes; test methods; part 1: determination of non-volatile matter, gravimetric method (ISO 9455-1:1990) |
| EN 29455-11-1993 |
軟釬焊劑 試驗方法 第11部分：釬劑殘留物的可溶性 |
Soft soldering fluxes; test methods; part 11: solubility of flux residues (ISO 9455-11:1991) |
| EN 29455-14-1993 |
軟釬焊劑 試驗方法 第14部分：釬劑殘留物膠粘度測定 |
Soft soldering fluxes; test methods; part 14: assessment of tackiness of flux residues (ISO 9455-14:1991) |
| EN 29455-5-1993 |
軟釬焊劑 試驗方法 第5部分：銅鏡試驗 |
Soft soldering fluxes; test methods; part 5: copper mirror test (ISO 9455-5:1992) |
| EN 29455-8-1993 |
軟釬焊劑 試驗方法 第8部分：鋅含量測定 |
Soft soldering fluxes; test methods; part 8: determination of zinc content (ISO 9455-8:1991) |
| EN 2948-1996 |
航空航天系列鈍化耐熱鋼制有口墊圈 |
Aerospace series - Washers, tab, in heat resisting steel, passivated |
| EN 2949-1996 |
航空航天系列鈍化耐腐蝕鋼制有線鎖緊墊圈 |
Aerospace series - Washers, wire locking, in corrosion resisting steel, passivated |
| EN 295-6-1995 |
排水管和下水道用陶瓷粘土管和管配件及管接頭 第6部分：陶瓷粘土檢修孔的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes |
| EN 295-7-1995 |
排水管和下水道用陶瓷粘土管和管配件及管接頭 第7部分：管托起用陶瓷粘土管和接頭的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking |
| EN 29519-1993 |
造船和海上建筑物 踏步級 |
Shipbuilding and marine structures; rungs for dog-step ladders (ISO 9519:1990) |
| EN 29539-1992 |
用于氣焊、切割及相關工藝用設備的材料 |
Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:1988) |
| EN 2955-1993 |
航空航天系列鈦和鈦合金廢料的回收 |
Aerospace series; recycling of titanium and titanium alloy scrap |
| EN 29658-1991 |
鋼 鋁含量的測定 火焰原子吸收光譜法 |
Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658:1990) |
| EN 297-7/A1-2004 |
燃氣集中供暖鍋爐.裝有標稱熱輸入量不超過70kw大氣燃燒器的B型鍋爐 |
|
| EN 297/prA4-2003 |
燃氣集中加熱鍋爐 裝配有額定輸入熱量不超過70kW的常壓燃燒器的B11型和B11BS型鍋爐 修改A4 |
Gas-fired central heating boilers - Type B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; Amendment A4 / Note: Intended as an amendment to EN 297 (1994-05). |
| EN 298-2003 |
帶或不帶鼓風機的燃氣爐及燃氣裝置用自動燃氣控制系統 |
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com