標準號 |
中文名稱 |
英文名稱 |
| EN 60851-2/prA2-2003 |
繞組線試驗方法第２部分：尺寸測定 修改草案２ |
Amendment 2 to IEC 60851-2, Ed. 2: Winding wires - Test methods - Part 2: Determination of dimensions; Clause 3: Test 4 dimensions |
| EN 60851-3/prA2-2003 |
繞組線試驗方法第３部分：機械性能 修改草案２ |
Amendment 2 to IEC 60851-3, Ed. 2: Winding wires - Test methods - Part 3: Mechanical properties; Clause 5: Test 8 Flexibility and adherence; Clause 7: Test 18 Heat bonding |
| EN 60851-5/prA2-2002 |
繞組線試驗方法第5部分：電性能 修改草案2 |
Amendment 2 to IEC 60851-5, Ed. 3: Winding wires - Test methods - Part 5: Electrical properties |
| EN 60851-6-2004 |
繞組線.試驗方法.第6部分:熱性能 |
|
| EN 60851-6/prA2-2003 |
繞組線試驗方法第6部分：熱性能 修改草案2 |
Amendment 2 to IEC 60851-6: Winding wires - Test methods - Part 6: Thermal properties |
| EN 60852-4-1996 |
電信和電子設備用變壓器和電感器的外形尺寸第4部分：使用YUI-2型鐵芯片的變壓器和電感器 |
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations (IEC 60852-4:1996) |
| EN 60855-1996 |
帶電作業用絕緣泡沫材料填充管和實心棒 |
Insulating foam-filled tubes and solid rods for live working (IEC 60855:1985, modified) |
| EN 60862-1-2003 |
經質量評定的表面聲波（SAW）濾波器第1部分：通用規范 |
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (IEC 60862-1:2003) / Note: Endorsement notice |
| EN 60862-2-2002 |
經質量評定的表面聲波（SAW）濾波器第2部分：使用指南 |
Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidance on use (IEC 60862-2:2002) / Note: Endorsement notice |
| EN 60864-2-1997 |
廣播發射機或發射機系統和監督設備之間互連的標準化第2部分：使用數據總線互連的系統接口標準 |
Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections (IEC 60864-2:1997) |
| EN 60865-1-1993 |
短路電流效應的計算第1部分：定義和計算方法 |
Short-circuit currents; Calculation of effects; Part 1: Definitions and calculation methods (IEC 60865-1:1993) |
| EN 60867-1994 |
絕緣液體以合成芳香烴為的未使用過的液體規范 |
Insulating liquids - specifications for unused liquids based on synthetic aromatic hydrocarbons (IEC 60867:1993) |
| EN 60868-0-1993 |
閃變計0部分：閃變度評估 |
Flickermeter; Part 0: Evaluation of flicker severity (IEC 60868-0:1991) |
| EN 60868-1993 |
閃變計功能和設計規范 |
Flickermeter; Functional and design specifications (IEC 60868:1986 + A1:1990) |
| EN 60869-1-2000 |
纖維光學衰減器第１部分：一般規范 |
Fibre optic attenuators - Part 1: Generic specification (IEC 60869-1:1999) |
| EN 60870-2-1-1996 |
遙控設備和系統第2部分：操作條件第1節：電源和電磁兼容性 |
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility (IEC 60870-2-1:1995) |
| EN 60870-2-2-1996 |
遙控設備和系統第２部分：使用條件第２節：環境條件(氣候的、機械的及其它非電氣條件的影響) |
Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) (IEC 60870-2-2:1996) |
| EN 60870-5-1-1993 |
遙控設備和系統第５部分：傳輸協議第１節：傳輸框架格式 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 1: Transmission frame formats (IEC 60870-5-1:1990) |
| EN 60870-5-101-2003 |
遙控設備和系統第5-101部分：傳輸協議基本遙控任務的配套標準 |
Telecontrol equipment and systems - Part 5-101: Transmission protocols; Companion standard for basic telecontrol tasks (IEC 60870-5-101:2003) / Note: Endorsement notice |
| EN 60870-5-102-1996 |
遙控設備和系統第５部分：傳輸協議第１０２部分：總電力系統中累計總量傳輸?shù)呐涮讟?biāo)準 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems (IEC 60870-5-102:1996) |
| EN 60870-5-103-1998 |
遙控設備和系統第５部分：傳輸協議第１０３部分：保護設備信息接口的配套標準 |
Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment (IEC 60870-5-103:1997) |
| EN 60870-5-104-2001 |
遙控設備和系統第５部分：傳輸協議第１０４部分：使用標準傳輸輪廓的IEC 60870-5-101所列標準的網絡存 |
Telecontrol equipment and systems - Part 5-104: Transmission protocols; Network access for IEC 60870-5-101 using standard transport profiles (IEC 60870-5-104:2000) |
| EN 60870-5-2-1993 |
遙控設備和系統第５部分：傳輸協議第２節：鏈路傳輸規程 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures (IEC 60870-5-2:1992) |
| EN 60870-5-3-1992 |
遙控設備和系統第５部分：傳輸協議第３節：應用數據通用結構規范 |
Telecontrol equipment and systems; part 5: transmission protocols; section 3: general structure of application data (IEC 60870-5-3:1992) |
| EN 60870-5-4-1993 |
遙控設備和系統第５部分：傳輸協議第４節：應用信息素的定義和編碼 |
Telecontrol equipment and systems; part 5: transmission protocols; section 4: definition and coding of application information elements (IEC 60870-5-4:1993) |
| EN 60870-5-5-1995 |
遙控設備和系統第5部分：傳輸協議第5節：基本應用功能 |
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basic application functions (IEC 60870-5-5:1995) |
| EN 60870-6-2-1995 |
遙控設備和系統第6部分：與ISO標準和ITU-T推薦標準建議兼容的遠動規約第2節：基本標準的使用(OSI層1- |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4) (IEC 60870-6-2:1995) |
| EN 60870-6-501-1996 |
遙控設備和系統第6部分：與ISO標準和ITU-T推薦標準建議兼容的遠動規約第５０１節：ＴＡＳＥ．１服務 |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 501: TASE.1 service definitions (IEC 60870-6-501:1995) |
| EN 60870-6-502-1996 |
遙控設備和系統第６部分：與ISO標準和ITU-T推薦規程一致的遙控協議第５０２節：TASE.1協議規范 |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 502: TASE.1 protocol definitions (IEC 60870-6-502:1995) |
| EN 60870-6-503-2002 |
遙測設備和系統第６部分：符合ISO標準和ITU-T推薦標準一致的遠程控制協議第５０３節：TASE.2服務和協議 |
Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO Standards and ITU-T Recommendations; TASE.2 services and protocol (IEC 60870-6-503:2002) / Note: Endorsement notice |
| EN 60870-6-601-1995 |
遙控設備和系統第６部分：與ISO標準和ITU-T推薦規程一致的遙控協議第６０１節：在通過永久性接入與分組 |
Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 601: Functional profile for providing the connection-oriented transport service in end system connected via permanent acce |
| EN 60870-6-701-1998 |
遙控設備和系統第６－７０１部分：與ISO標準和ITU-T推薦一致的遙控協議在終端系統中提供TASE.1應用服務 |
Telecontrol equipment and system - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems (IEC 60870-6-701:1998) |
| EN 60870-6-702-1998 |
遙控設備和系統第６－７０２部分：與ISO標準和ITU-T推薦規程一致的遙控協議提供終端系統用TASE.2應用服 |
Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems (IEC 60870-6-702:1998) |
| EN 60870-6-802-2002 |
遙測設備和系統第６部分：符合ISO標準和ITU-T推薦標準的遠程控制協議第８０２節：TASE.2目標模式 |
Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO Standards and ITU-T Recommendations; TASE.2 Object models (IEC 60870-6-802:2002) / Note: Endorsement notice |
| EN 60871-1-1997 |
額定電壓超過1kV的交流電力系統用并聯電容器第1部分：總則性能、試驗和額定安全要求安裝和運行指南 |
Shunt capacitors for a.c. power systems having a rated voltage above 1kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60871-1:1997) |
| EN 60871-4-1996 |
額定電壓1kV以上的交流電力系統用分路電容器第4部分：內部熔絲 |
Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - Part 4: Internal fuses (IEC 60871-4:1996) |
| EN 60872-1-1998 |
船舶導航和無線電通信設備和系統雷達標圖裝置第1部分：自動雷達標圖裝置(ARPA)試驗方法和要求的試驗 |
Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results (IEC 60872-1:1998) |
| EN 60872-2-1999 |
船舶導航和無線電通信設備和系統雷達標圖裝置第２部分：自動跟蹤標圖裝置 (ATA)試驗方法和要求的試驗 |
Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results (IEC 60872-2:1999) |
| EN 60872-3-2001 |
船舶導航和無線電通信設備和系統雷達標圖裝置第３部分：電子標繪儀（ＥＰＡ）性能要求測試方法和要求 |
Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA); Performance requirements; Methods of testing and required test results (IEC 60872-3:2000) |
| EN 60873-1-2004 |
工業過程控制系統用電動和氣動模擬圖表記錄儀.第1部分:性能評價方法 |
|
| EN 60873-1993 |
工業過程控制系統用電動和氣動模似圖表記錄儀的性能評定方法 |
Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems (IEC 60873:1986, modified) |
| EN 60873-2-2004 |
工業過程控制系統用電動和氣動模擬圖表記錄儀.第2部分:檢驗指南和常規試驗 |
|
| EN 60874-1-1999 |
光纖和光纜連接器第１部分：通用規范 |
Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:1999) |
| EN 60874-17-1997 |
光纖和電纜的接頭第１７部分：纖維光學接頭的部分規范F-05型(磨擦鎖定) |
Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996) |
| EN 60874-19-1997 |
光纖光纜連接器材第１９－１部分：光纖連接器分規范ＳＣ－Ｄ型（雙總） |
Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(duplex) (IEC 60874-19:1995 + corrigendum 1996) |
| EN 60875-1-1-1998 |
纖維光學分流裝置第１－１部分：空白詳細規格 |
Fibre optic branching devices - Part 1-1: Blank detail specification (IEC 60875-1-1:1996) |
| EN 60875-1-2001 |
纖維光學分流裝置第１部分：總規范 |
Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:2000) |
| EN 60876-1-2001 |
纖維光學開關第１部分：總規范 |
Fibre optic spatial switches - Part 1: Generic specification (IEC 60876-1:2001) |
| EN 60885-2-2003 |
電纜的電氣試驗方法第2部分：局部放電試驗 |
Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987) / Note: Endorsement notice |
| EN 60885-3-2003 |
電纜的電氣試驗方法第3部分：局部放電試驗擠壓電力電纜段局部放電測量的試驗方法 |
Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988) / Note: Endorsement notice |
| EN 60889-1997 |
架空線導線用硬拉制鋁線 |
Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987) |
| EN 60891-1994 |
對晶體硅光電器件測量特性I-V的溫度修正和輻照度修正的方法 |
Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices (IEC 60891:1987 + A1:1992) |
| EN 60893-1-1994 |
電工用熱固性樹脂基工業剛性層壓板規范第1部分：定義、名稱和一般要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 60893-1:1987) |
| EN 60893-1-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第1部分:定義、名稱和一般要求 |
|
| EN 60893-2-1994 |
電工用熱固性樹脂基工業剛性層壓板規范第２部分：試驗方法 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:1992) |
| EN 60893-2-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第2部分:試驗方法 |
|
| EN 60893-3-1-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-1部分:專用材料規范.對工業硬質層壓片類型的要求 |
|
| EN 60893-3-2-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-2部分:專用材料規范.對環氧樹脂硬質層壓片的要求 |
|
| EN 60893-3-3-1995 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁３：對三聚氰胺樹 脂硬質層壓片的要 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:1993) |
| EN 60893-3-3-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-3部分:專用材料規范.對三聚氰胺樹脂硬質層壓片的要求 |
|
| EN 60893-3-4-1995 |
電工用熱固性樹脂基工業剛性層壓板規范第3部分：專用材料規范活頁4：酚醛樹脂基剛性層壓板的要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:1993) |
| EN 60893-3-4-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-4部分:專用材料規范.對酚醛樹脂硬質層壓片的要求 |
|
| EN 60893-3-5-1995 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁５：聚酯樹脂基剛性層壓薄板的要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:1993) |
| EN 60893-3-5-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-5部分:專用材料規范.對聚酯樹脂硬質層壓片的要求 |
|
| EN 60893-3-6-1995 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁６：對硅氧烷樹脂基剛性層壓板的要求 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:1993) |
| EN 60893-3-6-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-6部分:專用材料規范.對硅樹脂硬質層壓片的要求 |
|
| EN 60893-3-7-1995 |
電工用熱固性樹脂基工業剛性層壓板規范第３部分：專用材料規范活頁７：聚酰亞胺樹脂基剛性層壓薄板的要 |
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:1994) |
| EN 60893-3-7-2004 |
絕緣材料.電工用熱固性樹脂工業硬質層壓片.第3-7部分:專用材料規范.對聚酰亞胺樹脂基硬質層壓片的要求 |
|
| EN 60895-1996 |
在標稱交流電壓達到800kV時帶電作業用的導電衣著 |
Conductive clothing for live working at a nominal voltage up to 800 kV a.c. (IEC 60895:1987, modified) |
| EN 60896-11-2003 |
固定鉛酸蓄電池組第11部分：通風型通用要求和試驗方法 |
Stationary lead-acid batteries - Part 11: Vented types; General requirements and methods of test (IEC 60896-11:2002) / Note: Endorsement notice |
| EN 60896-2-1996 |
固定式鉛酸蓄電池一般要求和試驗方法第2部分：閥門調節型 |
Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types (IEC 60896-2:1995) |
| EN 60896-21-2004 |
固定式鉛酸蓄電池.第21部分:閥門調節型.試驗方法 |
|
| EN 60896-22-2004 |
固定式鉛酸蓄電池.第22部分:閥門調節型.要求 |
|
| EN 60898-1-2003 |
電氣附件家用和類似用途電器過電流保護斷路器 第1部分：交流運行用斷路器 |
Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified) / Note: Endorsement notice*To be amended by EN 60898-1/prA1 (2003-07). |
| EN 60898-2-2001 |
家用和類似用途電器過電流保護斷路器規范第２部分：交流和直流操作的斷路器 |
Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2000) |
| EN 609-1-1999 |
農業和林業機械 原木分裂機的安全 第1部分：楔子分裂機 |
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| EN 609-2-1999 |
農業和林業機械 原木分裂機的安全 第2部分：螺旋分裂機 |
Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
| EN 60900-2004 |
帶電作業.交流1000V和直流1500V及以下帶電作業用手持工具 |
|
| EN 60901-1996 |
單端熒光燈安全與性能要求 |
Single-capped fluorescent lamps - Performance specifications (IEC 60901:1996) |
| EN 60901-2004 |
單端熒光燈.性能規范 |
|
| EN 60903/prAA-1996 |
帶電作業用絕緣材料手套和連指手套的規范修改ＡＡ |
Specification for gloves and mitts of insulating material for live working |
| EN 60904-1-1993 |
光伏器件第1部分：光伏電流電壓性能的測定 |
Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:1987) |
| EN 60904-10-1998 |
光伏器件第１０部分：線性測量方法 |
Photovoltaic devices - Part 10: Methods of linearity measurement (IEC 60904-10:1998) |
| EN 60904-3-1993 |
光伏器件第3部分：具有標準光譜度數據的地面用陽光伏器件的測量原理 |
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (IEC 60904-3:1989) |
| EN 60904-5-1995 |
光伏器件第5部分：用開路電壓法測定光伏器件的等效電池溫度 |
Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method (IEC 60904-5:1993) |
| EN 60904-7-1998 |
光伏器件第７部分：光伏器件測試中引起的光譜失配誤差的計算 |
Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device (IEC 60904-7:1998) |
| EN 60904-8-1998 |
光伏器件第８部分：光伏器件光譜響應的測量 |
Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device (IEC 60904-8:1998) |
| EN 60908-1999 |
激光唱片數字音響系統規范 |
Audio recording - Compact disc digital audio system (IEC 60908:1999) |
| EN 60909-0-2001 |
三相交流系統短路第0部分：電流計算 |
Short-circuit currents in three-phase AC systems - Part 0: Calculation of currents (IEC 60909-0:2001) |
| EN 60917-2-1-1995 |
電子設備用機械結構設計模型化規則第2部分：分規范25mm設備接口配合尺寸第1節：詳細技術條件殼體和構 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabin |
| EN 60917-2-1994 |
電子設備用機械結構設計模型化規則第2部分：分規范25mm設備的接口配合尺寸 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice (IEC 60917-2:1992) |
| EN 60917-2-2-1996 |
電子設備用機械結構設計模型化規則第2部分：分規范25mm設備的接口配合尺寸第2節：詳細規范分機柜、機 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subra- |
| EN 60929-2004 |
管形熒光燈用交流供電電子鎮流器.性能要求 |
|
| EN 60931-2-1996 |
額定電壓1000V及以下交流系統用非自動恢復性能型的并聯電力電容器第２部分：老化試驗和破壞性試驗 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1kV - Part 2: Ageing test and destruction test (IEC 60931-2:1995) |
| EN 60931-3-1996 |
額定電壓1000V(包括1000V)以下的交流系統用非自動恢復型并聯電力電容器第3部分：內部熔絲 |
Shunt power capacitors of non-self-healing type for a.c. systems having a rated voltage up to and including 1kV - Part 3: Internal fuses (IEC 60931-3:1996) |
| EN 60933-3-1992 |
音頻、視頻和視聽系統互連和匹配值第3部分：使用625行／50場制非復合信號ENG攝像機和便攜式錄像機的互 |
Audio, video and audiovisual systems; interconnections and matching values; part 3: interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems (IEC 60933-3:1992) |
| EN 60933-4-1994 |
音頻、視頻和視聽系統互連和匹配值第4部分：內部數字總線用連接器和接線點 |
Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) (IEC 60933-4:1994) |
| EN 60933-5-1993 |
音頻、視頻和視聽系統互連和匹配值第５部分：錄像系統用Y/C連接器連接器的電匹配值和描述 |
Audio, video and audiovisual systems; interconnections and matching values-part 5: Y/C connector for video systems; electrical matching values and description of the connector (IEC 60933-5:1992) |
| EN 60934-2001 |
設備斷路器 |
Circuit-breakers for equipment (CBE) (IEC 60934:2000) |
| EN 60936-1993 |
船用雷達使用方法和性能要求試驗方法和要求的試驗結果 |
Shipborne radar - Operational and performance requirements - Methods of test and required test results (IEC 60936:1988) |
| EN 60936-2-1999 |
海上導航和無線電通信設備及系統雷達第２部分：用于高速飛行器（HSC）的船用雷達 試驗方法和要求的試 |
Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC) - Methods of testing and required test results (IEC 60936-2:1998) |
| EN 60936-3-2002 |
海上導航和無線電通信設備及系統雷達第部分：有海圖設備的雷達性能要求、試驗方法和要求的試驗結果 |
Maritime navigation and radiocommunication equipment and systems - Radar - Part 3: Radar with chart facilities; Performance requirements, methods of test and required test results (IEC 60936-3:2002) / Note: Endorsement notice |
| EN 60938-1-1999 |
電磁干擾抑制用固定電感器第1部分：通用規范 |
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (IEC 60938-1:1999) |
| EN 60938-2-1-1999 |
電磁干擾抑制用固定電感器第2－1部分：空白詳細規范要求做安全試驗的電感器 評估等級D |
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D (IEC 60938-2:1999) |
| EN 60938-2-1999 |
電磁干擾抑制用固定電感器第2部分：分規范 |
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification (IEC 60938-2:1999) |
| EN 60938-2-2-1999 |
電磁干擾抑制用固定電感器第2－2部分：空白詳細規范要求做安全試驗的電感器 |
Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only) (IEC 60938-2-2:1999) |
| EN 60942-2003 |
電聲學聲音校正器 |
Electroacoustics - Sound calibrators (IEC 60942:2003) / Note: Endorsement notice |
| EN 60945-2002 |
海上導航和無線電通信設備及系統一般要求試驗方法和要求的試驗結果 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002) / Note: Endorsement notice |
| EN 60947-1-2004 |
低壓開關設備和控制設備.第1部分:總則 |
|
| EN 60947-2-2003 |
低壓開關和控制設備規范第2部分：斷路器 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2003) / Note: Endorsement notice |
| EN 60947-4-3-2000 |
低壓開關設備和控制設備規范第4－3部分：接觸器和電動機起動器非電動機負載用交流半導體控制器和接觸器 |
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999) |
| EN 60947-5-1-2004 |
低壓開關設備和控制設備.第5-1部分:控制電路器件和切換件.機電控制電路器件 |
|
| EN 60947-5-2-2004 |
低壓開關設備和控制設備.第5-2部分:控制電路器件和切換件.接近開關 |
|
| EN 60947-5-3-1999 |
低壓開關設備和控制設備規范第5－3部分：控制電路器件和開關件在故障條件下具有規定功能的接近開關（ |
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) (IEC 60947-5-3:1999) |
| EN 60947-5-4-1997 |
低壓開關設備和控制設備的規范第5部分：控制線路裝置和開關件第4部分：低能量接觸性能評估特殊試驗 |
Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 4: Methods of assessing the performance of low-energy contacts - Special tests (IEC 60947-5-4:1996) |
| EN 60947-5-5-1997 |
低壓開關設備和控制設備規范第5－5部分：控制線路設備和開關件具有機械鎖扣功能的電氣緊急故障中斷器 |
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997) |
| EN 60947-5-6-2000 |
低壓開關設備和控制設備規范第5－6部分：控制電路器件和切換件接近傳感器和切換放大器用直流連接器件 |
Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) (IEC 60947-5-6:1999) |
| EN 60947-5-7-2003 |
低壓開關裝置和控制裝置第5-7部分：控制電路設備和開關件帶有模擬輸出的臨近設備的要求 |
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements; Requirements for proximity devices with analogue output (IEC 60947-5-7:2003) / Note: Endorsement notice |
| EN 60947-6-2-2003 |
低壓開關設備和控制設備第6-2部分：.多功能設備控制和保護開關器件(或設備)(CPS) |
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment; Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2002) / Note: Endorsement notice |
| EN 60947-7-1-2002 |
低壓開關和控制設備規范第7-1部分：輔助設備銅導線用接線端子板 |
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks for copper conductors (IEC 60947-7-1:2002) / Note: Endorsement notice |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com