標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 3915-1999 |
塑料.導電塑料電阻率的測量 |
Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999 |
| DIN EN ISO 3927-2002 |
金屬粉末(不包括硬質合金粉末).單軸向壓縮時壓塑性(壓縮性)的測定 |
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001); German version EN ISO 3927:2001 |
| DIN EN ISO 3947-1994 |
天然或加工淀粉.脂肪總含量的測定 |
Starches, native or modified - Determination of total fat content (ISO 3947:1977); German version EN ISO 3947:1994 |
| DIN EN ISO 3950-1997 |
牙科學.牙齒和口腔區的名稱體系 |
Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995); German version EN ISO 3950:1997 |
| DIN EN ISO 3961-1999 |
動植物脂肪和油.碘值的測定 |
Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:1996); German version EN ISO 3961:1999 |
| DIN EN ISO 3977-5-2003 |
燃?xì)廨啓C.采購.第5部分:石油和天然氣工業的應用 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003 |
| DIN EN ISO 3993-1995 |
液化石油氣和輕質烴類.密度或相對密度的測定.壓力石油密度計法 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995 |
| DIN EN ISO 3994-2000 |
塑料軟管.含水物質的抽吸和排放用螺旋熱塑強化的熱塑塑料軟管.規范 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
| DIN EN ISO 4014-2001 |
六角頭螺栓.產品等級A和B |
Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000 |
| DIN EN ISO 4016-2001 |
六角頭螺栓.產品等級C |
Hexagon head bolts - Product grade C (ISO 4016:1999); German version EN ISO 4016:2000 |
| DIN EN ISO 4017-2001 |
六角頭螺釘.產品等級A和B |
Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000 |
| DIN EN ISO 4018-2001 |
六角頭螺釘.產品等級C |
Hexagon head screws - Product grade C (ISO 4018:1999); German version EN ISO 4018:2000 |
| DIN EN ISO 4023-1995 |
蒸汽用橡膠軟管.試驗方法 |
Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 |
| DIN EN ISO 4026-2004 |
內六角平端緊定螺釘 |
|
| DIN EN ISO 4027-2004 |
內六角錐端緊定螺釘 |
|
| DIN EN ISO 4028-2004 |
內六角圓柱端緊定螺釘 |
|
| DIN EN ISO 4029-2004 |
內六角凹端緊定螺釘 |
|
| DIN EN ISO 4032-2001 |
1型六角螺母.產品等級A和B |
Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000 |
| DIN EN ISO 4033-2001 |
2型六角螺母.產品等級A和B |
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999); German version EN ISO 4033:2000 |
| DIN EN ISO 4034-2001 |
六角螺母.產品等級C |
Hexagon nuts - Product grade C (ISO 4034:1999); German version EN ISO 4034:2000 |
| DIN EN ISO 4035-2001 |
六角薄螺母(倒角).產品等級A和B |
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000 |
| DIN EN ISO 4036-2001 |
六角薄螺母(不倒角).產品等級B |
Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000 |
| DIN EN ISO 4042-2001 |
緊固件.電解涂層(ISO 4042:1999) |
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 |
| DIN EN ISO 4044-1998 |
皮革.化學試驗用試樣的制備 |
Leather - Preparation of chemical test samples (ISO 4044:1977); German version EN ISO 4044:1998 |
| DIN EN ISO 4045-1998 |
皮革.pH值的測定 |
Leather - Determination of pH (ISO 4045:1977); German version EN ISO 4045:1998 |
| DIN EN ISO 4047-1998 |
皮革.硫酸化總灰分和硫酸化不溶于水灰分的測定 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977); German version EN ISO 4047:1998 |
| DIN EN ISO 4048-1998 |
皮革.溶解在二氯甲烷中的物質的測定 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977); German version EN ISO 4048:1998 |
| DIN EN ISO 4049-2001 |
牙科學.可復原的封膠材料制成的聚脂填充物 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000 |
| DIN EN ISO 4063-2000 |
焊接及有關工藝.工藝和參考值的命名 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998); German version EN ISO 4063:2000 |
| DIN EN ISO 407-2005 |
小型醫用氣瓶.針導軛式閥連接 |
|
| DIN EN ISO 4073-2005 |
牙科設備.牙科治療室設備項目.識別體系 |
|
| DIN EN ISO 4074-2002 |
天然橡膠陰莖套的要求和試驗方法 |
Natural latex condoms - Requirements and test methods (ISO 4074:2002); German version EN ISO 4074:2002 |
| DIN EN ISO 4080-1995 |
橡膠和塑料軟管及軟管組件.透氣性測定 |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 |
| DIN EN ISO 4090-2004 |
攝影.醫用射線攝影盒式磁帶/屏幕/膠片和硬拷貝成像膠片.尺寸和規范 |
|
| DIN EN ISO 4119-1996 |
紙漿.漿料濃度的測定 |
Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996 |
| DIN EN ISO 4126-1-2004 |
過壓保護安全設備.第1部分:安全閥 |
|
| DIN EN ISO 4126-2-2003 |
過壓保護安全設備.第2部分:防爆板安全設備 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003); German version EN ISO 4126-2:2003 |
| DIN EN ISO 4126-4-2004 |
過壓保護安全設備.第4部分:安全操作導閥 |
|
| DIN EN ISO 4126-5-2004 |
過壓保護安全設備.第5部分:可控安全減壓系統 |
|
| DIN EN ISO 4126-6-2004 |
過壓保護安全設備.第6部分:安全隔板的應用、選擇和安裝 |
|
| DIN EN ISO 4126-7-2004 |
過壓保護安全設備.第7部分:通用數據 |
|
| DIN EN ISO 4135-2002 |
麻醉和呼吸設備.詞匯 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
| DIN EN ISO 4142-2003 |
實驗室玻璃器皿.試管 |
Laboratory glassware - Test tubes (ISO 4142:2002); German version EN ISO 4142:2002 |
| DIN EN ISO 4157-1-1999 |
建筑用圖紙.制圖系統.第1部分:建筑物和建筑部分 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998); German version EN ISO 4257-1:1998 |
| DIN EN ISO 4157-2-1999 |
建筑用圖紙.制圖系統.第2部分:房間名稱與號碼 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998); German version EN ISO 4157-2:1998 |
| DIN EN ISO 4157-3-1999 |
建筑用圖紙.制圖系統.第3部分:房間標識 |
Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998); German version EN ISO 4157-3:1998 |
| DIN EN ISO 4165-2004 |
道路車輛.電氣連接.雙極連接 |
|
| DIN EN ISO 4256-1999 |
液化石油氣.蒸汽壓力的測定.液化石油氣法 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998 |
| DIN EN ISO 4257-2002 |
液化石油氣.取樣方法 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001); German version EN ISO 4257:2001 |
| DIN EN ISO 4259-1996 |
石油產品.試驗方法精度用數值的測定和應用 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992 + Cor 1:1993); German version EN ISO 4259:1995 |
| DIN EN ISO 4264-1996 |
石油產品.用四個可變等式法對柴油燃料十六烷指數的計算 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995); German version EN ISO 4264:1996 |
| DIN EN ISO 4267-2-1996 |
石油和液體石油制品.油量的計算.第2部分:動態測量 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988); German version EN ISO 4267-2:1995 |
| DIN EN ISO 4287-1998 |
幾何產品規范(GPS).表面結構:輪廓法.術語,定義和表面結構的參數 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997); German version EN ISO 4287:1998 |
| DIN EN ISO 4288-1998 |
幾何制品規范(GPS).表面構造:斷面法.表面構造評估的規則和程序 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996); German version EN ISO 4288:1997 |
| DIN EN ISO 4320-1997 |
非離子表面活性劑.濁點指數的測定.容量法 |
Non-ionic surface active agents - Determination of cloud point-index - Volumetric method (ISO 4320:1977, including Erratum:1980); German version EN ISO 4320:1997 |
| DIN EN ISO 4375-2004 |
水文測驗.河流測量用索道系統 |
|
| DIN EN ISO 445-1998 |
物料裝卸用托盤.詞匯 |
Pallets for materials handling - Vocabulary (ISO 445:1996); German version EN ISO 445:1998 |
| DIN EN ISO 449-1999 |
船舶和航海技術.磁羅盤,羅盤座和方位判讀裝置.A級 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A (ISO 449:1997); German version EN ISO 449:1999 |
| DIN EN ISO 4490-2002 |
金屬粉末.用校準漏斗(霍爾流量計)測定流動時間 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001); German version EN ISO 4490:2001 |
| DIN EN ISO 4516-2002 |
金屬和其他無機鍍層.維氏硬度計和努氏顯微硬度試驗機 |
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002 |
| DIN EN ISO 4518-1995 |
金屬鍍層.鍍層厚度的測量.表面光法度輪廓儀法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980); German version EN ISO 4518:1995 |
| DIN EN ISO 4524-3-1995 |
金屬鍍層.金及金合金電鍍層的試驗方法.第3部分:孔隙率的陽極電解試驗 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985); German version EN ISO 4524-3:1995 |
| DIN EN ISO 4524-6-1995 |
金屬鍍層.電鍍金和金合金鍍層的測試方法.第6部分:殘留鹽類的測定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988); German version EN ISO 4524-6:1994 |
| DIN EN ISO 4526-2004 |
金屬涂層.工程用鎳電鍍層 |
|
| DIN EN ISO 4535-1999 |
釉瓷和搪瓷.抗洗滌紡織品用熱洗滌劑溶液性能測定用儀器 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983); German version EN ISO 4535:1998 |
| DIN EN ISO 4536-1995 |
金屬基質上的金屬和無機物涂層.鹽液滴腐蝕試驗(SD試驗) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995 |
| DIN EN ISO 4538-1995 |
金屬鍍層.硫代乙酰胺腐蝕試驗(TAA試驗) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978); German version EN ISO 4538:1995 |
| DIN EN ISO 4541-1995 |
金屬和其它無機物涂層.涂膏密室耐腐蝕試驗(CORR試驗) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994 |
| DIN EN ISO 4543-1995 |
金屬鍍層和其它無機物涂層.適用于儲存情況的腐蝕試驗一般規則 |
Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994 |
| DIN EN ISO 4566-1995 |
艙內安裝發動機的小型船舶.錐度為1:10螺旋漿軸端和尾軸轂 |
Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992); German version EN ISO 4566:1995 |
| DIN EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空氣中氧化熱穩定性的測定.烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999 |
| DIN EN ISO 4583-1998 |
塑料.環氧樹脂和有關材料.易皂化氯的測定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998); German version EN ISO 4583:1998 |
| DIN EN ISO 4589-1-1999 |
塑料.通過氧指數測定其燃燒性.第1部分:導論 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996); German version EN ISO 4589-1:1999 |
| DIN EN ISO 4589-2-1999 |
塑料.通過氧指數測定其燃燒性.第2部分:環境溫度試驗 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996); German version EN ISO 4589-2:1999 |
| DIN EN ISO 4590-2003 |
硬質泡沫塑料.開孔和閉孔容積百分?jǐn)?shù)測定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002); German version EN ISO 4590:2003) |
| DIN EN ISO 4597-1-1998 |
塑料.環氧樹脂的硬化劑和促進劑.第1部分:名稱與牌號 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997 |
| DIN EN ISO 4599-1997 |
塑料.耐環境應力龜裂的測定.彎形條塊法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986); German version EN ISO 4599:1996 |
| DIN EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物樹脂.室溫下增塑劑吸收的測定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998 |
| DIN EN ISO 4610-2002 |
塑料.氯乙烯均聚物和共聚物樹脂.使用氣噴式篩濾器械的篩析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001 |
| DIN EN ISO 4611-2000 |
塑料.濕熱,水濺和鹽霧效果的測定 |
Plastics - Determination of effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987); German version EN ISO 4611:1999 |
| DIN EN ISO 4612-1999 |
塑料.測試用途的聚氯乙烯(PVC)膏料制備.行星式混合器方法 |
Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999 |
| DIN EN ISO 4613-1-1999 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第1部分:名稱與符號及規范. |
Plastics - Ethylen/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993); German version EN ISO 4613-1:1999 |
| DIN EN ISO 4613-2-1995 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第2部分:試樣制造和性能測定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995 |
| DIN EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和擠塑材料.第2部分:試驗樣品的制備和性能測定 |
|
| DIN EN ISO 4614-2000 |
塑料.三聚氰胺--甲醛壓模.可萃取的甲醛的測定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977); German version EN ISO 4614:1999 |
| DIN EN ISO 4615-2000 |
塑料.未飽和的聚酯和環氧樹脂.氯的總含量的測定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999 |
| DIN EN ISO 4617-2000 |
色漆和清漆.等義術語表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000); German version EN ISO 4617:2000 |
| DIN EN ISO 4618-2-1999 |
漆和涂料.涂層材料的術語和定義.第2部分:漆的特征和性能的專門術語 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999); Trilingual version EN ISO 4618-2:1999 |
| DIN EN ISO 4618-3-1999 |
漆和涂料.涂層材料的術語和定義.第3部分:表面準備和涂層方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999); Trilingual version EN ISO 4618-3:1999 |
| DIN EN ISO 4622-1994 |
色漆和清漆.堆積壓力試驗 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992); German version EN ISO 4622:1994 |
| DIN EN ISO 4623-1-2002 |
涂料和清漆.耐絲狀腐蝕性的測定 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrate (ISO 4623-1:2000); German version EN ISO 4623-1:2002 |
| DIN EN ISO 4623-2-2004 |
涂料和清漆.耐絲狀腐蝕性的測定.第2部分:鋁襯底 |
|
| DIN EN ISO 4624-2003 |
色漆和清漆.粘附力拉脫試驗 |
(Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002); German version EN ISO 4624:2003) |
| DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第1部分:一般說明和名稱與符號系統 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003); German version EN ISO) |
| DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第1部分:一般說明和名稱與符號系統 |
|
| DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第10部分:絲狀腐蝕等級評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003); German version EN ISO) |
| DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第10部分:絲狀腐蝕等級評定 |
|
| DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第2部分:起泡等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003); German version EN ISO 4628-2:200 |
| DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第2部分:起泡等級的評定 |
|
| DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第3部分:生銹等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003); German version EN ISO 4628-3:2003) |
| DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第3部分:生銹等級的評定 |
|
| DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第4部分:裂紋等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003); German version EN ISO 4628-4:2003) |
| DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第4部分:裂紋等級的評定 |
|
| DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第5部分:剝落等級的評定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003); German version EN ISO 4628-5:2003) |
| DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第5部分:剝落等級的評定 |
|
| DIN EN ISO 4628-6-2002 |
涂料和清漆.涂料覆層降解的評定.一般缺陷的程度、數量和大小的規定.第6部分:起霜程度的粘膠帶評定方法 |
Paints and varnishes - Evaluation of degradation of paint coatings; Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990); German version EN ISO 4628-6:2001 |
| DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第7部分:粉化等級評定用絲絨方法 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003); German version E) |
| DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第7部分:粉化等級評定用絲絨方法 |
|
| DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第8部分:劃痕周圍脫層和腐蝕度的評定 |
|
| DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的評定.缺陷量值、大小以及外觀均勻改變程度的規定.第8部分:劃痕周圍脫層和腐蝕度的評定 |
|
| DIN EN ISO 4629-1998 |
色漆介質.羥值的測定.滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996); German version EN ISO 4629:1998 |
| DIN EN ISO 4651-1995 |
泡沫橡膠和塑料.動態彈性的測定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988); German version EN ISO 4651:1995 |
| DIN EN ISO 4671-2000 |
橡膠和塑料軟管及軟管組件.尺寸測量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
| DIN EN ISO 4672-1999 |
橡膠和塑料軟管低于室溫的柔性試驗 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 |
| DIN EN ISO 4674-2-1998 |
橡膠或塑料涂層的織物.抗撕裂強度的測定.第2部分:沖擊擺法 |
Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998 |
| DIN EN ISO 472-2002 |
塑料.詞匯 |
Plastics - Vocabulary (ISO 472:1999); German version EN ISO 472:2001 |
| DIN EN ISO 4753-2000 |
緊固件.米制ISO外螺紋零件尾端 |
Fasteners - Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999 |
| DIN EN ISO 4757-1994 |
螺釘?shù)氖植?/td>
| Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994 |
| DIN EN ISO 4759-1-2001 |
緊固件公差.第1部分:螺栓、螺釘和墊圈和螺母.產品等級A和C |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
| DIN EN ISO 4759-3-2000 |
緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.產品等級A和C |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com