標準號 |
中文名稱 |
英文名稱 |
| EN 463-1994 |
抗液態化學品的防護服 試驗方法 射流防滲透性測定（射流試驗） |
Protective clothing for use against liquid chemicals - Test method: Determination of resistance to penetration by a jet of liquid (Jet Test) |
| EN 464-1994 |
包括氣溶液體和固體粒子的抗液態和氣態化學品的防護服 試驗方法：氣密服的密封性測定(內壓力試驗) |
Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test) |
| EN 468-1994 |
液態化學品防護服 試驗方法：噴射抗?jié)B透性的測定(噴射試驗) |
Protective clothing for use against liquid chemicals - Test method: Determination of resistance to penetration by spray (Spray test) |
| EN 469-1995 |
消防人員的防護服裝 消防防護服裝的要求和試驗方法 |
Protective clothing for firefighters - Requirements and test methods for protective clothing for firefighting |
| EN 47-1988 |
木材防腐劑 對防護家天牛 （Linnaeus）幼蟲的毒性值的測定（實驗室法） |
Wood preservatives; determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) (laboratory method) |
| EN 471-2003 |
專業人員用高能見度報警服 試驗方法及要求 |
High-visibility warning clothing for professional use - Test methods and requirements |
| EN 472-1994 |
壓力計 詞匯 |
Pressure gauges - Vocabulary |
| EN 473-2000 |
無損檢測 無損檢測人員的資格和認證 一般原則 |
Non destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 474-1-1994 |
土方機械 安全 第1部分：一般要求 |
Earth-moving machinery - Safety - Part 1: General requirements |
| EN 474-10-1998 |
土方機械 安全 第10部分：挖溝機的要求 |
Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
| EN 474-11-1998 |
土方機械 安全 第11部分：土地和垃圾掩埋夯土機要求 |
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
| EN 474-2-1996 |
土方機械 安全 第2部分：履帶式推土機的要求 |
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
| EN 474-3-1996 |
土方機械 安全 第3部分：裝載機的要求 |
Earth-moving machinery - Safety - Part 3: Requirements for loaders |
| EN 474-4-1996 |
土方機械 安全 第4部分：挖掘裝載機的要求 |
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
| EN 474-5-1996 |
土方機械 安全 第5部分：液壓挖掘機的要求 |
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
| EN 474-6-1996 |
土方機械 安全 第6部分：翻斗車的要求 |
Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
| EN 474-7-1998 |
土方機械 安全 第7部分：鏟土機要求 |
Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
| EN 474-8-1998 |
土方機械 安全 第8部分：平地機的要求 |
Earth-moving machinery - Safety - Part 8: Requirements for graders |
| EN 474-9-1998 |
土方機械 安全 第9部分：管道敷設機的要求 |
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
| EN 475-1995 |
醫療設備 電氣報警信號 |
Medical devices - Electrically-generated alarm signals |
| EN 476-1997 |
用于排水管道組件、重力系統的排水管的一般要求 |
General requirements for components used in discharge pipes, drains and sewers for gravity systems |
| EN 477-1995 |
門窗制造用未增塑聚氯乙烯(PVC-U)外形 通過下落重物對主要側面抗沖擊性的測定 |
Unplasticized polyvinyl chloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by the falling mass |
| EN 478-1995 |
門窗制造用未增塑聚氯乙烯(PVC-U)外形 暴露于攝氏150℃后的外觀 試驗方法 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 ℃ - Test method |
| EN 479-1995 |
門窗制造用未增塑聚氯乙烯(PVC-U)外形 熱反轉的測定 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion |
| EN 48-1988 |
木材防腐劑 對家具蛀蟲根除作用的測定（實驗室法） |
Wood preservatives; determination of the eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) |
| EN 480-1-1997 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第1部分：用于測試的參考混凝土和參考灰泥 |
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| EN 480-10-1996 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第10部分：水溶解氯化物含量的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content |
| EN 480-11-1998 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第11部分：硬化混凝土空氣隙特性的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete |
| EN 480-12-1997 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第12部分：混合物堿含量的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures |
| EN 480-13-2002 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第13部分：測試灰泥混合物用參考圬工灰漿 |
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
| EN 480-2-1996 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第2部分：凝固時間的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
| EN 480-4-1996 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第4部分：混凝土泌水性的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete |
| EN 480-5-1996 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第5部分：毛細作用吸水率的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption |
| EN 480-6-1996 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第6部分：紅外線分析 |
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis |
| EN 480-8-1996 |
混凝土、灰泥和水泥漿的混合物 試驗方法 第8部分：常用干料含量的測定 |
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content |
| EN 481-1993 |
工作場所空氣 度量空氣沉降粒子的尺寸分數定義 |
Workplace atmospheres; size fraction definitions for measurement of airborne particles |
| EN 482-1994 |
工作場所空氣 化學試劑測量程序性能的一般要求 |
Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents |
| EN 484-1997 |
專用液化石油氣器具規范 包括室外用配套烤架的獨立烤盤 |
Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use |
| EN 485-1-1993 |
鋁和鋁合金 片材、帶材和板材 第1部分：檢驗和交貨的技術條件 |
Aluminium and aluminium alloys-Sheet, strip, and plate-Part 1: Technical conditions for inspection and delivery |
| EN 485-2-1994 |
鋁和鋁合金 片材、帶材和板材 第2部分：機械性能 |
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 485-2-2004 |
鋁和鋁合金.薄板、帶材和板材.第2部分:機械性能 |
|
| EN 485-3-2003 |
鋁和鋁合金 片材、帶材和板材 第3部分：熱軋制品的形狀和尺寸公差 |
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 485-4-1993 |
鋁和鋁合金 片材、帶材和板材 第4部分：冷軋制品的形狀和尺寸公差 |
Aluminium and aluminium alloys-Sheet, strip and plate-Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 486-1993 |
鋁和鋁合金 擠壓鑄錠 規范 |
Aluminium and aluminium alloys-Extrusion ingots-Specifications |
| EN 487-1993 |
鋁和鋁合金 軋錠 規范 |
Aluminium and aluminium alloys- Rrolling ingots- Specifications |
| EN 488-2003 |
熱水分配管道 地下熱水網用預先絕熱包覆的管道系統 成套鋼鐵管道設備的管閥門組件、聚氨酯熱絕緣和聚乙 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 489-2003 |
熱水分配管道 地下熱水網用預隔熱包覆的管道系統 成套鋼鐵管道設備的接頭組件、聚氨酯熱絕緣和聚乙烯外 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 49-1-1992 |
木材防腐劑 用產卵和幼蟲成活法對抗家具蛀蟲防護效果的測定 第1部分：表面處理法運用（實驗室法） |
Wood preservatives; determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival; part 1: application by surface treatment (laboratory method) |
| EN 49-2-1992 |
木材防腐劑 用產卵和幼蟲成活法對抗家具蛀蟲防護效果的測定 第2部分：浸漬法運用（實驗室法） |
Wood preservatives; determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival; part 1: application by impregnation (laboratory method) |
| EN 490-1994 |
混凝土屋面瓦及配件 產品規范 |
Concrete roofing tiles and fittings - Product specifications |
| EN 491-1994 |
混凝土屋面瓦及配件 試驗方法 |
Concrete roofing tiles and fittings - Test methods |
| EN 493-1992 |
緊固件 表面不均勻性 螺母 |
Fasteners; Surface discontinuities; Nuts |
| EN 495-5-2000 |
防水用柔性板 低溫下折疊性的測定 第5部分：屋頂防水用塑料和橡膠板 |
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing |
| EN 497-1997 |
專用液化石油氣器具規范 室外用多用途蒸煮爐 |
Specification for dedicated liquefied petroleum gas appliances - Multi purpose boiling burners for outdoor use |
| EN 498-1997 |
專用液化石油氣器具規范 室外用烤肉架 |
Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use |
| EN 499-1994 |
焊接消耗品 非合金與細粒鋼的手工金屬電弧焊用包劑焊條 分類 |
Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels - Classification |
| EN 500-1-1995 |
移動式道路施工機械 安全 第1部分：通用要求 |
Mobile road construction machinery - Safety - Part 1: Common requirements |
| EN 500-2-1995 |
移動式道路施工機械 安全 第2部分：路面研壓機的特殊要求 |
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines |
| EN 500-3-1995 |
移動式道路施工機械 安全 第3部分：夯土機械的特殊要求 |
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil stabilization machines |
| EN 500-4-1995 |
移動式道路施工機械 安全 第4部分：夯實機械的特殊要求 |
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
| EN 50001-1972 |
低壓開關設備和控制設備 尺寸 一般規則 |
Low-voltage switchgear and controlgear- Dimensions- General rules |
| EN 50002-1972 |
低壓開關設備和控制設備尺寸 繼電器接觸固定孔 |
Low-voltage switchgear and controlgear- Dimensions- Fixing holes of contactor relays |
| EN 50003-1973 |
低壓開關設備和控制設備尺寸 電動機接觸器固定孔 |
Low-voltage switchgear and controlgear for industrial use- Dimensions- Fixing holes of contactor for motors |
| EN 50005-1976 |
低壓開關設備和控制設備 連線端標記 一般規則 |
Low voltage switchgear and controlgear for industrial use- Terminal marking- General rules |
| EN 50011-1977 |
低壓開關設備和控制設備 特殊控制繼電器的終端標志和特殊數字和特殊標記 |
Low voltage switchgear and controlgear for industrial use- Terminal marking, distinctive number and distinctive letter for particular contactor relays |
| EN 50012-1977 |
低壓開關設備和控制設備 特殊接觸器輔助連接用終端標志和特殊數字 |
Low voltage switchgear and controlgear for industrial use- Terminal marking and distinctive number for auxiliary contacts of particular contactors |
| EN 50013-1977 |
低壓開關設備和控制設備 特殊控制開關觸點連線端子標志和參數 |
Low voltage switchgear and controlgear for industrial use- Terminal marking and distinctive number for particular control switches |
| EN 50014/prA3-1998 |
潛在爆炸環境用防爆電氣 一般要求 |
Electrical apparatus for potentially explosive atmospheres - General requirements |
| EN 50014/prAA-1999 |
潛在爆炸環境用防爆電氣 一般要求 修改AA |
Electrical apparatus for potentially explosive atmospheres - General requirements; Amendment AA |
| EN 50015-1998 |
潛在爆炸環境用防爆電氣 O級密封設備 |
Electrical apparatus for potentially explosive atmospheres - Oil immersion “O” |
| EN 50016-2002 |
潛在爆炸環境用防爆電氣 p級密封設備 |
Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p |
| EN 50017-1998 |
潛在爆炸環境下防爆用電氣 q級填充粉料 |
Electrical apparatus for potentially explosive atmospheres - Powder filling q |
| EN 50020-2002 |
潛在爆炸環境用防爆電氣i級安全性 |
Electrical apparatus for potentially explosive atmospheres - Intrinsic safety i |
| EN 50028-1987 |
潛在爆炸性環境用防爆電氣設備m 型密封 |
Electrical apparatus for potentially explosive atmospheres; encapsulation“m” |
| EN 50033-1991 |
潛在爆炸性環境用防爆電氣設備防甲烷礦工帽燈 |
Electrical apparatus for potentially explosive atmospheres; caplights for mines susceptible to firedamp |
| EN 50039-1980 |
潛在爆炸性環境用防爆電氣設備固有安全i系統 |
Electrical apparatus for potentially explosive atmospheres. Intrinsic safety i Systems |
| EN 50041-1981 |
工業用低壓開關控制設備控制開關42.5×80行程開關尺寸和特性 |
Low voltage switchgear and controlgear for industrial use. Control switches. Position switches 42.5 × 80. Dimensions and characteristics |
| EN 50042-1980 |
工業用低壓開關控制設備終端標記外加輔助電子電路件和接點的連接 |
Low voltage switchgear and controlgear for industrial use. Terminal marking. Terminals for external associated electronic circuit components and contacts |
| EN 50043-1985 |
工業用低壓開關控制設備平面連接尺寸和量規 |
Low voltage switchgear and controlgear for industrial use. Sizes numbers and gauges for flat connections |
| EN 50047-1981 |
工業用低壓開關控制設備控制開關30×55行程開關尺寸和特性 |
Low voltage switchgear and controlgear for industrial use. Control switches. Position switches 30×55. Dimensions and characteristics |
| EN 50050-2001 |
潛在爆炸性環境用防爆電氣設備手持靜電噴 |
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| EN 50053-1-1987 |
使用易燃噴涂材料的靜電噴涂器的選擇、安裝和使用要求第1部分：能量極限為0.24mJ的手持靜電噴漆槍及有關 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable spraying materials - Part 1: Hand-held electrostatic paint spray guns with an energy limit of O.24 mJ and their associated apparatus |
| EN 50053-2-1989 |
使用易燃材料的靜電噴涂器的選擇、安裝和使用要求第2部分：能量極限為5mJ的手持靜電噴粉槍及有關裝置 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - part 2: Hand-held electrostatic powder spray guns with an energy limit of 5 mJ and their associated apparatus |
| EN 50053-3-1989 |
使用易燃材料的靜電噴涂器的選擇、安裝和使用要求第3部分：能量極限為0.24mJ 或5mJ的手持靜電纖維填料噴 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 3: Hand - held electrostatic flock spray guns with an energy limit of 0,24 mJ or 5 mJ and their associated apparatus |
| EN 50059-1990 |
涂漆和飾面用不可燃材料手持靜電噴涂設備規范 |
Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| EN 50063-1989 |
電阻焊和相關工藝用設備的制造和安裝的安全要求 |
Safety requirements for the construction and the installation of equipment for resistance welding and allied processes |
| EN 50065-1-2001 |
頻率范圍為3kHz至148.5kHz的低壓電氣設備的信號裝置 第1部分：一般要求、頻帶和電磁干擾 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
| EN 50065-2-1-2003 |
頻率范圍為3kHz-148.5kHz的低壓電氣設備的信號裝置第2-1部分：主通信設備頻率范圍為95kHz-148.5kHz以及計 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i |
| EN 50065-2-2-2003 |
頻率范圍為3kHz-148.5kHz的低壓電氣設備的信號裝置第2-2部分：主通信設備頻率范圍為95kHz-148.5kHz以及計 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i |
| EN 50065-2-3-2003 |
頻率范圍為3kHz-148.5kHz的低壓電氣設備的信號裝置第2-3部分：主通信設備頻率范圍為95kHz-148.5kHz以及計 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by el |
| EN 50065-4-1-2001 |
頻率范圍為3kHz-148.5KHZ的低壓電氣設備的信號裝置低壓去耦濾波器總規范 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-1: Low voltage decoupling filters; Generic specification |
| EN 50065-4-3-2003 |
頻率范圍為3kHz至148.5kHz的低壓電氣設備的信號第4-3部分：低壓去偶濾波器輸入濾波器 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-3: Low voltage decoupling filter; Incoming filter |
| EN 50065-4-4-2003 |
頻率范圍為3kHz至148.5kHz的低壓電氣設備的信號裝置第4-4部分：低壓去耦濾波器阻抗濾波器 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter; Impedance filter |
| EN 50065-4-5-2003 |
頻率范圍為3kHz至148.5kHz的低壓電氣設備的信號裝置第4-5部分：低壓去耦濾波器分割濾波器 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-5: Low voltage decoupling filter; Segmentation filter |
| EN 50065-7-2001 |
頻率范圍為3kHz至148.5kHz的低壓電氣設備的信號裝置第7部分：設備阻抗 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance |
| EN 50066-1992 |
道路車輛中主供電設備用的小型連接器規范 |
Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| EN 50073-1999 |
燃氣或氧氣檢驗和測量裝置的選擇安裝使用和維修指南 |
Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen |
| EN 50075-1990 |
家用和類似用途Ⅱ類設備連接用帶軟線的2.5A、250V不可再連接的兩相扁插銷規范 |
Flat non-wirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
| EN 50075/prA1-1995 |
家用和類似用途Ⅱ類設備連接用帶軟線的2.5A、250V不可再連接的兩相扁插銷規范修改A1 |
Flat non rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
| EN 50077-1993 |
心臟起搏器第3部分：可植入的心臟起搏器用的小薄面連接器 |
Low-profile connector for implantable cardiac pacemakers |
| EN 50080-1991 |
MAC AM-VSB收報機RF性能規范 |
RF characteristics of MAC AM-VSB cable receivers |
| EN 50083-10-2002 |
電視和聲音信號及交互式服務用電纜分配系統 第10部分：回程線路系統性能 |
Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| EN 50083-2-2001 |
電視和聲音信號及交互式服務用電纜網絡第2部分：設備的電磁兼容性 |
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| EN 50083-3-2002 |
電視和聲音信號及交互式服務用電纜網絡第3部分：共軸電纜網絡的活力寬譜帶設備 |
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks |
| EN 50083-4-1998 |
電視和聲音信號及交互式服務用電纜網絡第4部分：共軸電纜網絡的無源寬譜帶設備 |
Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 50083-5-2001 |
電視和聲音信號及交互式服務用電纜網絡第5部分：起點設備 |
Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| EN 50083-6-1997 |
電視和聲音信號及交互式服務用電纜網絡第6部分：光學設備 |
Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| EN 50083-8-2002 |
電視和聲音信號及交互式服務用電纜網絡第8部分：網絡的電磁兼容性 |
Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks |
| EN 50083-9-2002 |
電視和聲音信號及交互式服務用電纜網絡第9部分：DVB/MPEG-2-傳輸電流用 CATV-/SMATV端點和類似專業設備 |
Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| EN 50085-1/prA2-2002 |
電氣裝置用電纜槽和電纜管道系統第1部分：一般要求 修改PrA2 |
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2 |
| EN 50085-2-3-1999 |
電氣裝置用電纜槽和電纜管道系統第2-3部分：箱式設備用有槽電纜槽系統的特殊要求 |
Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
| EN 50086-1-1993 |
電纜裝置用導管系統第1部分：一般要求 |
Conduit systems for cable management - Part 1: General requirements |
| EN 50086-1/prA1-1995 |
電氣裝置用導管系統第1部分：一般要求 修改A1 |
Conduit systems for electrical installations - Part 1: General requirements; Amendment A1 |
| EN 50087-1993 |
家用和類似用途電器的安全散裝牛奶冷卻器的特殊要求 |
Safety of household and similar electrical appliances; particular requirements for bulk-milk coolers |
| EN 50090-2-1-1994 |
家用及建筑物電子系統（HBES）第2-1部分：系統綜述、建筑 |
Home and Building Electronic Systems (HBES) - Part 2-1: System overview; architecture |
| EN 50090-3-1-1994 |
家用及建筑物電子系統(HBES)第3-1部分：應用方面應用結構介紹 |
Home and Building Electronic Systems (HBES) - Part 3-1: Aspects of application - Introduction to the application structure |
| EN 50090-3-2-1995 |
家用及建筑物電子系統(HBES)第3-2部分：應用方面用戶程序 |
Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process |
| EN 50090-3-2-2004 |
家用和建筑物用電子系統(HBES).第3-2部分:使用方面.1類HBES的用戶說明 |
|
| EN 50090-4-1-2004 |
家用和建筑物用電子系統.第4-1部分:媒介獨立層.HBES 1級應用層 |
|
| EN 50090-4-2-2004 |
家用和建筑物用電子系統(HBES).第4-2部分:介質獨立層.1級HBES運輸層、網絡層和數據鏈路層的通用部分 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com