標準號 |
中文名稱 |
英文名稱 |
| prEN 14117-2002 |
混凝土結構防護和維修用產品和系統 試驗方法 黏性澆注產品的粘度測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of viscosity of cementitious injection products |
| prEN 14124-2001 |
有內溢流的沖洗池的進水閥 |
Inlet valves for flushing cisterns with internal overflow |
| prEN 14125-2003 |
汽油加油站的地下管道工程 |
Pipework for underground installation at petrol stations |
| prEN 14127-2001 |
無損檢驗超聲波厚度測量 |
Non-destructive testing - Ultrasonic thickness measurement |
| prEN 14128-2003 |
木材和木基產品的耐久性用生物試驗法測定醫用木木制品防生蟲性的性能標準 |
Durability of wood and wood-based products - Performance criteria for curative wood preservatives as determined by biological tests |
| prEN 14129-2001 |
液化石油汽（LGP）罐壓力調節閥 |
Pressure relief valves for LPG tanks |
| prEN 14134-2003 |
建筑的通風 住宅通風系統的安裝檢查和性能試驗 |
Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
| prEN 14135-2003 |
覆蓋物 防火性能的測定 |
Coverings - Determination of fire protection ability |
| prEN 14141-2003 |
天然氣管道輸送閥 試驗和性能要求 |
Valves for natural gas transportation in pipelines - Performance requirements and tests |
| prEN 14146-2003 |
天然石材試驗方法 動態彈性模量的測定（用基本共振頻率測定法） |
Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) |
| prEN 14147-2003 |
天然石材試驗方法 抗鹽霧腐蝕（變質）性的測定 |
Natural stone test methods - Determination of resistance to ageing by salt mist |
| prEN 14150-2001 |
土工合成隔離層 流體滲透性的測定 |
Geosynthetic barriers - Determination of permeability to liquids |
| prEN 141500-1992 |
分規范：經能力批準的定做的精密電位器 |
Sectional specification: custom built precision potentiometers with capability approval |
| prEN 141501-1992 |
空白詳細規范：提供經能力批準的定做的精密電位器的生產商 |
Blank detail specification: manufacturers supplying custom built precision potentiometers with their scope of capability approval |
| prEN 14151-2001 |
土工合成布 斷裂強度的測定 |
Geosynthetics - Determination of burst strength |
| prEN 14153-1-2003 |
娛樂潛水 戴潛水呼吸器娛樂潛水員訓練的相關安全的最低要求 第1部分： 1級受訓 潛水員 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 1: Level 1; Supervised diver |
| prEN 14153-2-2003 |
娛樂潛水 戴潛水呼吸器訓練的相關安全的最低要求 第2部分：等級2 自主潛水員 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2; Autonomous diver |
| prEN 14153-3-2003 |
娛樂潛水 戴潛水呼吸器訓練的相關安全的最低要求 第3部分：等級3 教練 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 3: Level 3; Dive leader |
| prEN 14154-1-2001 |
水表 第1部分：一般要求 |
Water meters - Part 1: General requirements |
| prEN 14154-2-2001 |
水表 第2部分：安裝及使用條件 |
Water meters - Part 2: Installation and conditions of use |
| prEN 14154-3-2001 |
水表 第3分: 試驗方法及試驗設備 |
Water meters - Part 3: Test methods and equipment |
| prEN 14157-2001 |
天然石材試驗方法 抗磨損的測定 |
Natural stone test methods - Determination of the abrasion resistance |
| prEN 14158-2003 |
天然石材試驗方法 斷裂力的測定 |
Natural stone test methods - Determination of rupture energy |
| prEN 14159-2001 |
紡織品地板覆蓋物 圖案展示公差和小地毯及整全室地毯（直線）尺寸公差的推薦 |
Textile floor coverings - Recommendations for tolerances on (linear) dimensions of rugs and wall-to-wall carpet and for tolerances on pattern repeat |
| prEN 14161-2003 |
石油和天然氣工業 管道運輸系統 |
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified) |
| prEN 14175-3-2003 |
通風櫥 第3部分：型式試驗方法 |
Fume cupboards - Part 3: Type test methods |
| prEN 14176-2003 |
食品 在蚌類中用用高效液相色譜法（HPLC）測定蚌類中軟骨藻酸 |
Foodstuffs - Determination of domoic acids in mussels by HPLC |
| prEN 14177-2003 |
食品 純的和混合的蘋果汁和醬中展開青霉素的測定用液體/液體分配提純的高效液相色譜法（HPLC）測定 |
Foodstuffs - Determination of patulin in clear and cloudy apple juice and puree - HPLC method with liquid/liquid partition clean-up |
| prEN 14178-1-2001 |
建筑玻璃 堿性堿土硅酸鹽玻璃產品 浮法玻璃 |
Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass |
| prEN 14178-2-2001 |
建筑玻璃 堿性堿土硅酸鹽玻璃產品 第2部分：合格性評估 |
Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity |
| prEN 14179-1-2001 |
建筑玻璃 熱浸熱固鈉鈣安全玻璃 第1部分：種類和定義 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| prEN 14179-2-2001 |
建筑用玻璃 熱浸熱固鈉鈣安全玻璃 第2部分：合格性評估 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity |
| prEN 14181-2003 |
固定源排放 自動監測系統的質量保證 |
Stationary source emissions - Quality assurance of automated measuring systems |
| prEN 14183-2003 |
梯級凳 |
Step stools |
| prEN 14188-1-2001 |
接縫填料和密封劑 第1部分：熱應用密封劑的規范 |
Joint fillers and sealants - Part 1: Specifications for hot applied sealants |
| prEN 1419-1994 |
電子束和激光束的鋼焊縫 關于缺陷質量水平的指南 |
Electron and laser beam welded joints in steel; guidance on quality levels for imperfections |
| prEN 14190-2001 |
二次處理石膏板產品 試驗方法、定義和要求 |
Gypsum plasterboard products from secondary processing - Definitions, requirements and test methods |
| prEN 14195-2001 |
石膏隔墻、墻板、天花板內襯用金屬構架部件試驗方法、定義和要求 |
Metal framing components for gypsum plasterboard partitions, wall und ceiling linings - Definitions, requirements and test methods |
| prEN 14196-2003 |
土工合成纖維織物 粘土土工合成織物隔離物單位面積質量的測試驗方法 |
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers |
| prEN 14197-2-2003 |
低溫容器 靜態非真空隔熱容器 第2部分：設計、制造、試驗和檢查 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
| prEN 14197-3-2003 |
低溫容器 靜態非真空隔熱容器 第3部分：操作要求 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements |
| prEN 14198-2001 |
鐵路設備 剎車 機車牽引列車的剎車系統的要求 |
Railway applications - Braking - Requirements for the brake system of trains hauled by a locomotive |
| prEN 14199-2001 |
特殊土工工程施工 微樁法 |
Execution of special geotechnical works - Micropiles |
| prEN 14200-2003 |
鐵路設備 吊件 拋物面形鋼彈簧 |
Railway application - Suspension components - Parabolic springs, steel |
| prEN 14201-2003 |
簾和百葉窗 耐重復開關性 試驗方法 |
Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing |
| prEN 14202-2001 |
百葉窗和外層簾 用管形和方形電動裝置牽引的適用性 試驗方法和要求 |
External blinds and shutters - Suitability for use of tubular and square motorization - Requirements and test method |
| prEN 14203-2003 |
百葉窗和內層及外層簾 裝搖動把手（T.O)的機械操作系統的使用性能 試驗方法和要求 |
Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
| prEN 14204-2003 |
化學防腐劑和消毒劑 獸醫方面使用化學防腐劑和消毒殺滅分枝菌能力評定用定量懸浮試驗 試驗方法和要求（2 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2, step 1) |
| prEN 14205-2003 |
天然石材的試驗方法 努氏硬度測定 |
Natural stone test methods - Determination of Knoop hardness |
| prEN 14208-2003 |
可運輸氣瓶 氣體運輸用容積達3000升的焊接氣罐規范 設計和結構 |
Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| prEN 14209-2001 |
預制石膏線 試驗方法、定義和要求 |
Preformed plasterboard cornices - Definitions, requirements and test methods |
| prEN 14210-2003 |
表面活性劑 用鐙形法或圓環法測定表面活性劑溶液的表面張力 |
Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
| prEN 14211-2003 |
環境空氣質量 用化學發光法測定對一氧化 化氮和二氧化氮濃度測定的測量方法 |
Ambient air quality - Measurement method for the determination of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| prEN 14212-2003 |
環境空氣質量 用紫外熒光法測定二氧化硫濃度測定的測量方法 |
Ambient air quality - Measurement method for the determination of the concentration of sulphur dioxide by ultraviolet fluorescence |
| prEN 14216-2003 |
水泥 大塊澆灌低熱水泥成份和規范和遵守的標準 |
Cement - Composition, specifications and conformity criteria for very low heat special cements |
| prEN 14220-2001 |
窗外、門框和外門扇用木材和木制材料 要求和規范 |
Timber and wood-based materials in windows, external door leaves and external door frames - Requirements and specification |
| prEN 14221-2001 |
窗內、門框和內門扇用木材和木制材料 要求和規范 |
Timber and wood-based materials in internal door leaves and internal door frames - Requirements and specification |
| prEN 14223-2001 |
防水柔性薄板 車輛通行的混凝土橋面和其他混凝土表面的防水 水吸收測定 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption |
| prEN 14224-2001 |
防水柔性薄板 車輛通行的混凝土橋面和其他混凝土表面的防水 裂紋搭接性能的測定 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability |
| prEN 14225-3-2001 |
潛水服裝 第3部分：御寒或保溫服 試驗方法和要求 |
Diving suits - Part 3: Actively heated or cooled suit (systems) - Requirements and test methods |
| prEN 14225-4-2001 |
潛水服裝 第4部分：一個大氣壓的潛水服 試驗方法和人為因數要求 |
Diving suits - Part 4: One atmosphere diving suit; Human factors requirements and test methods |
| prEN 14227-1-2001 |
未粘合及液壓粘合的混合物 規范 第1部分：公路路基和底基層用水泥粘合混合物 |
Unbound and hydraulically bound mixtures - Specifications - Part 1: Cement bound mixtures for road bases and subbases |
| prEN 14227-2-2001 |
未粘合及液壓粘合的混合物 規范 第2部分 礦渣粘合混合物 定義、成分、分類 |
Unbound and hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures - Definitions, composition, classification |
| prEN 14227-3-2001 |
未粘合及液壓粘合的混合物 規范 第3部分： 粘合混合物用灰分 定義、成分、分類 |
Unbound and hydraulically bound mixtures - Specifications - Part 3: Fly ash for bound mixtures - Definitions, composition, classification |
| prEN 14227-4-2001 |
未粘合及液壓粘合的混合物 規范 第4部分：液壓粘合混合物用灰分 定義、成分、分類 |
Unbound and hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures; Definitions, composition, classification |
| prEN 14227-5-2002 |
未粘合及液壓粘合的混合物 規范 第5部分 用液壓道路粘合劑粘合的粒狀物料 規范 第3部分：定義、成份、 |
Unbound and hydraulically bound mixtures - Specifications - Part 5: Granular materials bound with hydraulic road binders; Definitions, composition, classification |
| prEN 14229-2001 |
架空線用木電線桿 要求 |
Wood poles for overhead lines - Requirements |
| prEN 14238-2001 |
起重機 手控荷載操縱裝置 |
Cranes - Manually controlled load manipulating devices |
| prEN 14239-2003 |
建筑物通風 管道系統 管道系統 表面積測量 |
Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| prEN 14240-2003 |
建筑物通風 冷卻的天花板 額定值和試驗 |
Ventilation for buildings - Chilled ceilings - Testing and rating |
| prEN 14241-1-2001 |
煙囪 彈性密封劑和彈性密封 試驗方法和材料要求 煙囪襯墊的密封 |
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| prEN 14242-2001 |
鋁及鋁合金 化學分析 感應耦合等離子發射光譜分析 |
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| prEN 14246-2001 |
天花板吊頂石膏材 試驗方法、定義和要求 |
Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| prEN 14250-2001 |
木材結構 用沖壓金屬板扣的預制構架的產品要求 |
Timber structures - Product requirements for prefabricated trusses using punched metal plate fasteners |
| prEN 14251-2003 |
鋪地織物 機織栽絨地毯的分類 |
Structural round timber - Test methods |
| prEN 14253-2003 |
機械振動 職業性曝露于全身振動對健康危害的測量和評估 操作指南 |
Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
| prEN 14254-2001 |
體外診斷醫療設備 除血液外從人體采集的樣品一次性貯存容器 |
In vitro diagnostic medical devices - Single-use receptacles for the collection of specimens, other than blood, from humans |
| prEN 14255-1-2001 |
不連續光輻射 工作場所人暴露于人造紫外光源輻射的評估和測量 |
Incoherent optical radiation - Part 1: Measurement and assessment of radiation exposures by artificial UV-sources in the workplace |
| prEN 14256-2001 |
非結構木材應用粘合劑 耐靜態荷載要求和試驗方法 |
Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
| prEN 14257-2001 |
粘合劑 木材粘合劑 高溫下搭接頭的拉力強度的測定 |
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT91) |
| prEN 14258-2001 |
粘合劑 在特殊溫度條件下接頭長時和短時期暴露的機械性能 |
Adhesives - Mechanical behaviour of joints subjected to short and long terms exposure at specified conditions of temperature |
| prEN 14259-2003 |
地面覆蓋物膠粘劑 要求 |
Adhesives for floor coverings - Requirements for mechanical and electrical performance |
| prEN 14267-2001 |
灌溉技術 灌溉栓 |
Irrigation techniques - Irrigation hydrants |
| prEN 14268-2001 |
灌溉技術 灌溉用水表 |
Irrigation techniques - Meters for irrigation water |
| prEN 14276-1-2001 |
熱泵和冷卻系統的壓力設備 容器 一般要求 |
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels; General requirements |
| prEN 14277-2001 |
建筑物通風 送氣口 在送氣口/充氣箱中用校正傳感器測量氣流的方法 |
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in ATD/Plenum boxes |
| prEN 14278-1-2003 |
紡織品 棉纖維粘性測定 第1部分：用人工測熱器法 |
Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device |
| prEN 14279-2001 |
木屑層壓膠合板木材（LVL） 要求、規格、定義和分類 |
Laminated Veneer Lumber (LVL) - Specifications, definitions, classification and requirements |
| prEN 14280-2001 |
地下電纜管道的塑料管線系統 未增塑聚氯乙烯 塑料管、管件及管線規范 |
Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14281-2001 |
地下電纜管道的塑料管線系統 聚乙烯 塑料管、管件及管線規范 |
Plastics piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| prEN 14282-2001 |
地下電纜管道的塑料管線系統 聚丙烯 塑料管、管件及管線規范 |
Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 14283-2001 |
一般用途地下管道的塑料管線系統 未增塑聚氯乙烯 塑料管、管件及管線規范 |
Plastics piping systems for general purpose buried ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14284-2001 |
一般用途地下管道的塑料管線系統 聚乙烯 塑料管、管件及管線規范 |
Plastics piping systems for general purpose buried ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| prEN 14285-2001 |
一般用途地下管道的塑料管線系統 聚丙烯 塑料管、管件及管線規范 |
Plastics piping systems for general purpose buried ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 14286-2001 |
鋁及鋁合金 危險貨物運輸和貯存罐的可焊軋制產品 |
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| prEN 14287-2001 |
鋁及鋁合金 制造包裝及包裝部件用鋁材化學成分的特殊要求 |
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| prEN 14288-2003 |
皮革 機械和物理試驗 云霧特性測定 |
Leather - Physical and mechanical tests - Determination of fogging characteristics |
| prEN 14289-2003 |
皮革 機械和物理試驗 水滲透壓測定 |
Leather - Physical and mechanical tests - Determination of water penetration pressure |
| prEN 14290-2001 |
鋅及鋅合金 二次加工的原材料 |
Zinc and zinc alloys - Secondary raw materials |
| prEN 14291-2001 |
氣體裝置泄漏檢測用起泡液 |
Foam producing solutions for leak detection on gas installation |
| prEN 14292-2001 |
升溫時木材膠粘劑耐靜態加載的測定 |
Determination of static load resistance of wood adhesives to increasing temperature |
| prEN 14293-2001 |
粘合劑 粘結鑲木地板用粘合劑 最低要求和試驗方法 |
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
| prEN 14294-2001 |
皮革和制鞋材料用粘合劑 用模壓處理制備粘結試片 |
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| prEN 14295-2003 |
焊接消耗品 高強度鋼埋弧焊絲和管狀藥芯焊條與焊條、焊劑組件 分類 |
Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
| prEN 14296-2001 |
家用公共洗滌池 |
Communal washing troughs for domestic purposes |
| prEN 14297-2001 |
煙囪 耐熔凍試驗方法 |
Chimneys - Frezze-thaw resistance test method |
| prEN 14298-2001 |
鋸木 烘干質量評估 |
Sawn timber - Assessment of drying quality |
| prEN 14299-2001 |
非活動外科植入物 心臟和動脈植入物的特殊要求 aterial stents（ 阿特利特用量）的特殊要求 |
Non active surgical implants - Particular requirements for cardiac and vascular implants - Specific requirements for aterial stents |
| prEN 14303-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制礦棉產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| prEN 14304-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制柔性人造橡膠泡沫產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| prEN 14305-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制蜂窩玻璃產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| prEN 14306-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制硅酸鈣產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| prEN 14307-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制擠壓聚苯乙烯泡沫產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| prEN 14308-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制硬質聚氨基甲酸乙酯泡沫和聚異氰尿酸酯泡沫產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| prEN 14309-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制膨脹聚氯乙烯產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| prEN 14313-2002 |
工業裝置和建筑設備用隔熱產品 工廠制聚乙烯泡沫產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| prEN 14314-2002 |
工業裝置和建筑設備用熱絕緣產品 工廠制酚醛泡沫產品 規范 |
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
| prEN 14315-1-2002 |
建筑物熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第1部分：安裝前的硬質泡沫噴射系統的規范 |
Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane foam (PUR) products - Part 1: Specification for the rigid foam spray system before installation |
| prEN 14315-2-2002 |
建筑物熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第2部分：安裝產品規范 |
Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane foam (PUR) products - Part 2: Specification for the installed products |
| prEN 14316-1-2002 |
建筑物熱絕緣產品 現場制膨脹珍珠巖熱絕緣產品 第1部分：安裝前粘合的及松散填充的產品規范 |
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com