標準號 |
中文名稱 |
英文名稱 |
| BS EN 1783-1997 |
火柴.性能要求、安全和分類 |
(Matches - Performance requirements, safety and classification) |
| BS EN 1784-2003 |
食品.經過照射處理含脂肪的食品的檢測.碳?xì)浠衔锏臍庀嗌V分析 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons) |
| BS EN 1785-2003 |
食品.經過照射處理含脂肪食品的檢測.2烷基環丁酮的氣相色譜/質譜分析 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones) |
| BS EN 1786-1997 |
食品.電子自旋共振光譜儀對含骨食品的輻射檢驗 |
(Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy) |
| BS EN 1787-2000 |
食物.ESR光譜法檢測含纖維素經過輻射的食品 |
(Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy) |
| BS EN 1788-2001 |
食品.可與硅酸鹽礦物隔絕的輻照食品的熱致發光檢測 |
(Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated) |
| BS EN 1789-2000 |
醫用車輛和其設備.道路救護車 |
(Medical vehicles and their equipment - Road ambulances) |
| BS EN 179-1998 |
建筑硬件.由水平把手或推板控制的緊急出口裝置.要求和試驗方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods) |
| BS EN 1790-1998 |
道路標記材料.預制道路標記 |
(Road marking materials - Preformed road markings) |
| BS EN 1791-1997 |
表面活性劑.脂肪烷基乙烷胺氧化物.胺氧化物含量測定 |
(Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content) |
| BS EN 1792-2003 |
焊接.焊接和相關工藝術語的多語種對照表 |
(Welding - Multilingual list of terms for welding and related processes) |
| BS EN 1793-1-1998 |
道路交通阻塞噪音減低裝置.測定聲學性能的試驗方法.聲音吸收的內在特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Intrinsic characteristics of sound absorption) |
| BS EN 1793-2-1998 |
道路交通的噪音減低系統.聲學性能測定的試驗方法.空載聲隔絕的固有特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Intrinsic characteristics of airborne sound insulation) |
| BS EN 1793-3-1998 |
道路交通的噪音減低系統.聲學性能測定的試驗方法.標準化交通噪音頻譜 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Normalized traffic noise spectrum) |
| BS EN 1794-1-2003 |
道路交通噪聲降低設備.非聲學性能.機械性能和穩定性要求 |
(Road traffic noise reducing devices - Non-acoustic performance - Mechanical performance and stability requirements) |
| BS EN 1795-1998 |
可移動煤氣罐(不含LPG).煤氣服務政策的改變步驟 |
(Transportable gas cylinders (excluding LPG) - Procedures for change of gas service) |
| BS EN 1797-1-1998 |
低溫容器.氣體/材料可混用性.氧可混用性 |
(Cryogenic vessels - Gas/material compatibility - Oxygen compatibility) |
| BS EN 1797-2001 |
低溫容器.氣體/材料可混用性 |
(Cryogenic vessels - Gas/material compatibility) |
| BS EN 1799-1999 |
混凝土結構的防護和修理的產品和系統.試驗方法.應用于混凝土表面的結構膠粘劑的適應性的測量方法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface) |
| BS EN 1800-1999 |
可移動氣瓶.乙炔瓶.基本要求和定義 |
(Transportable gas cylinders - Acetylene cylinders - Basic requirements and definitions) |
| BS EN 1801-1999 |
可移動鋼瓶.單乙炔瓶的填充條件 |
(Transportable gas cylinders - Filling conditions for single acetylene cylinders) |
| BS EN 180101-1995 |
電子器件質量評定協調體系規范.固定光纖衰減器空白詳細規范 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed fibre optic attenuators) |
| BS EN 1802-2002 |
可運輸儲氣瓶.無縫鋁合金儲氣瓶的周期性檢驗和測試 |
(Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders) |
| BS EN 1803-2002 |
可運輸儲氣瓶.焊接炭素鋼儲氣瓶的周期性檢驗和測試 |
(Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders) |
| BS EN 1804-1-2002 |
地礦機械.液壓礦頂支撐物的安全要求.支撐裝置及一般要求 |
(Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements) |
| BS EN 1806-2000 |
煙囪.單壁粘土/陶瓷煙道磚塊.要求和試驗方法 |
(Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods) |
| BS EN 1807-1999 |
木工機械的安全.帶鋸機械 |
(Safety of woodworking machines - Band sawing machines) |
| BS EN 1808-1999 |
懸吊設備的安全性要求.設計計算、穩定性標準和結構.試驗 |
(Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests) |
| BS EN 1809-1998 |
潛水附件.浮力補償器.功能和安全要求.試驗方法 |
(Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods) |
| BS EN 1810-1998 |
體穿孔后用組件.火焰原子吸收分光光度法測定鎳含量的參考試驗方法 |
(Body-piercing post assemblies - Reference test method for determination of nickel content by flame atomic absorption spectrometry) |
| BS EN 181000-1995 |
電子件用質量評定協調系統.總規范.纖維光學分流裝置 |
(Harmonized system of quality assessment for electronic components - Generic specification - Fibre optic branching devices) |
| BS EN 1811-1999 |
由直接和延長與皮膚接觸的產品中鎳釋放的參考試驗方法 |
(Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin) |
| BS EN 181101-1995 |
電子器件質量評定協調體系.光纖分路器件的空白詳細規范.型號:非波長選擇的星形、發射分光離器/連光器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: non wavelength selective transmissive star) |
| BS EN 181102-1995 |
光纖分路器件的空白詳細規范.型號:非波長選擇的星形、多路調制/解調制器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: wavelength selective transmission star) |
| BS EN 181103-1998 |
電子件質量評估的協調系統.空白詳細規范.光纖分支裝置.型號:電信應用的非波長選擇傳輸星型三相繞阻 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: non wavelength selective transmissive star for telecommunication a) |
| BS EN 181104-1998 |
電子件質量評估的協調系統.空白詳細規范.光纖分支裝置.型號:電信應用的波長選擇傳輸星型三相繞阻 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: wavelength selective transmissive star for telecommunication appli) |
| BS EN 1813-1998 |
鋪地織物.用耐蘑機械對羊毛織物完整性的測定 |
(Textile floor coverings - Determination of wool fibre integrity using an abrasion machine) |
| BS EN 1814-1998 |
織物地板鋪面.用改良威特曼鼓試驗測定抗在剪切邊角上的損害力 |
(Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test) |
| BS EN 1814-2005 |
鋪地織物.用改良威特曼鼓試驗測定在剪邊處的抗損壞性 |
|
| BS EN 1815-1998 |
彈性和織物地板鋪面.靜電性能評估 |
(Resilient and textile floor coverings - Assessment of static electrical propensity) |
| BS EN 1816-1998 |
彈性地板覆蓋物.帶有泡沫背面的相同和不同種光滑橡膠地板覆蓋物規范 |
(Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing) |
| BS EN 1817-1998 |
彈性地板覆蓋物.相同和不同種光滑橡膠地板覆蓋物規范 |
(Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings) |
| BS EN 1818-1999 |
彈性地板覆蓋物.承載重小腳輪效果的測定 |
(Resilient floor coverings - Determination of the effect of loaded heavy duty castors) |
| BS EN 1820-1997 |
麻醉儲藏袋 |
(Anaesthetic reservoir bags) |
| BS EN 1821-1-1997 |
電動道路車輛.道路運行能力的測量.純電動車輛 |
(Electrically propelled road vehicles - Measurement of road operating ability - Pure electric vehicles) |
| BS EN 1821-2-1999 |
電動道路車輛.道路運行能力的測量.熱電動復合動力車 |
(Electrically propelled road vehicles - Measurement of road operating ability - Thermal electric hybrid vehicles) |
| BS EN 1822-1-1998 |
高效空氣過濾器(HEPA和ULPA).分類、性能試驗和標記 |
(High efficiency air filters (HEPA and ULPA) - Classification, performance testing, marking) |
| BS EN 1822-2-1998 |
高效空氣過濾器(HEPA和ULPA).氣溶膠產品、測量設備、粒子計數統計 |
(High efficiency air filters (HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics) |
| BS EN 1822-3-1998 |
高效空氣過濾器(HEPA和ULPA).試驗扁平片狀過濾媒介 |
(High efficiency air filters (HEPA and ULPA) - Testing flat sheet filter media) |
| BS EN 1822-4-2000 |
高效空氣過濾器(HEPA和ULPA).過濾器件泄漏性的測定 |
(High efficiency air filters (HEPA and ULPA) - Determining leakage of filter element (scan method)) |
| BS EN 1822-5-2000 |
高效空氣過濾器(HEPA和ULPA).過濾器件的效率測定 |
(High efficiency air filters (HEPA and ULPA) - Determining the efficiency of filter element) |
| BS EN 1824-1998 |
道路標記材料.道路試驗 |
(Road marking materials - Road trials) |
| BS EN 1825-2-2002 |
油脂分離器.標準尺寸的選擇、安裝、操作和維護 |
(Grease separators - Selection of nominal size, installation, operation and maintenance) |
| BS EN 1826-1997 |
生物工藝學.大比例方法和生產.原材料監督控制方法 |
(Biotechnology - Large-scale process and production - Control procedures for raw materials) |
| BS EN 1827-1999 |
呼吸保護裝置.防氣體或氣體和微粒或只防微粒的無吸氣閥和帶分離式過濾器的半面罩.要求、試驗和標記 |
(Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking) |
| BS EN 1828-2002 |
健康信息.外科程序用分類和編碼系統的目錄結構 |
(Health informatics - Categorial structure for classifications and coding systems of surgical procedures) |
| BS EN 1834-1-2000 |
往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.用在可燃?xì)怏w和蒸氣環境的II組發動機 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable gas and vapo) |
| BS EN 1834-2-2000 |
往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.用在地下工作時對沼氣和/或可燃性塵 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group I engines for use in underground workings su) |
| BS EN 1834-3-2000 |
往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.用在可燃灰塵環境下的II組發動機 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable dust atmosph) |
| BS EN 1835-2000 |
呼吸保護裝置.連接頭盔和頭罩的輕型結構壓縮空氣的線狀呼吸裝置.要求,試驗,標記 |
(Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking) |
| BS EN 1836-1997 |
個人眼睛防護.常規使用的太陽鏡和濾光鏡 |
(Personal eye protection - Sunglasses and sunglare filters for general use) |
| BS EN 1837-1999 |
機械的安全.機械的整體照明 |
(Safety of machinery - Integral lighting of machines) |
| BS EN 1838-1999 |
照明設備.應急燈 |
(Lighting applications - Emergency lighting) |
| BS EN 1839-2004 |
氣體和蒸氣爆炸極限的測定 |
|
| BS EN 1841-1999 |
膠粘劑.地板覆蓋物和墻壁覆蓋物用膠粘劑的試驗方法.與膠粘劑粘接的油氈地板覆蓋物尺寸變化的測定 |
(Adhesives - Test methods for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive) |
| BS EN 1842-1997 |
塑料.熱固性聚合物(SMC-BMC).壓制�？s測定 |
(Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage) |
| BS EN 1844-2001 |
防水軟板.耐臭氧性測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1845-1999 |
制靴機械.靴模機.安全要求 |
(Footwear manufacturing machines - Footwear moulding machines - Safety requirements) |
| BS EN 1846-1-1998 |
消防車和救援車.命名和名稱與符號 |
(Firefighting and rescue service vehicles - Nomenclature and designation) |
| BS EN 1846-2-2002 |
消防車和救援車.安全和性能的一般要求 |
(Firefighting and rescue service vehicles - Common requirements - Safety and performance) |
| BS EN 1846-3-2004 |
消防車和救援車.固定安裝設備.安全和性能 |
|
| BS EN 1847-2001 |
防水柔性層.防水塑料和橡膠片.暴露于液體化學藥品包括水的方法 |
(Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals including water) |
| BS EN 1848-1-2000 |
防水柔性板.長度,寬度和垂直度的測定.屋頂防水用瀝青板 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Bitumen sheets for roof waterproofing) |
| BS EN 1848-2-2001 |
防水軟板.長度、寬度和平直度的測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1849-1-2000 |
防水柔性板.厚度和單位面積質量的測定.屋頂防水用瀝青板 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Bitumen sheets for roof waterproofing) |
| BS EN 1849-2-2001 |
防水軟板.厚度和單位面積質量的測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1850-1-2000 |
防水柔性板.可視缺陷的測定.屋頂防水用瀝青板 |
(Flexible sheets for waterproofing - Determination of visible defects - Bitumen sheets for roof waterproofing) |
| BS EN 1850-2-2001 |
防水軟板.可視缺陷的測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of visible defects - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1852-1-1998 |
無壓地下排水管和下水道用塑料管道系統.聚丙烯(PP).管道,管配件及系統用規范 |
(Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Specifications for pipes, fittings and the system) |
| BS EN 1853-1999 |
農業機械.帶傾卸車身的掛車.安全 |
(Agricultural machinery - Trailers with tipping body - Safety) |
| BS EN 1854-1997 |
氣燃器和氣燃器具的壓力感受裝置 |
Pressure sensing devices for gas burners and gas burning appliances |
| BS EN 1856-1-2003 |
煙囪.金屬煙囪的要求.系統煙囪產品 |
(Chimneys - Requirements for metal chimneys - System chimney products) |
| BS EN 1857-2003 |
煙囪.組件.混凝土煙道襯塊 |
(Chimneys - Components - Concrete flue liners) |
| BS EN 1858-2003 |
煙囪.組件.混凝土煙道磚 |
(Chimneys - Components - Concrete flue blocks) |
| BS EN 1859-2000 |
煙囪.金屬煙囪.試驗方法 |
(Chimneys - Metal chimneys - Test methods) |
| BS EN 1860-1-2003 |
燒烤用器具、固體燃料和點火器.燒烤用固體燃料.要求和試驗方法 |
(Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels - Requirements and test methods) |
| BS EN 1860-2-2005 |
燒烤用器具、固體燃料和點火器.燒烤木炭和燒烤木炭成型煤.要求和試驗方法 |
|
| BS EN 1860-3-2003 |
燒烤用器具、固體燃料和點火器.燒烤用固體燃料點燃用點火器.要求和試驗方法 |
(Appliances, solid fuels and firelighters for barbecueing - Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods) |
| BS EN 186000-1-1994 |
電子器件的質量評定協調系統.光纖和光纜的連接設備.總規范.要求,試驗方法和合格批準程序 |
(Harmonized system of quality assessment for electronic components - Generic specification - Connector sets for optical fibres and cables - Requirements, test methods and qualification approval procedu) |
| BS EN 186001-1994 |
電子氣件質量評定協調體系.空白詳細規范.光纖和光纜連接器空白詳細規范.Ⅰ類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connectors for optical fibres and cables - Environmental category I) |
| BS EN 186002-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.II類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category II) |
| BS EN 186003-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.III類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category III) |
| BS EN 186004-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.IV類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category IV) |
| BS EN 186005-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.V類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category V) |
| BS EN 186006-1-1996 |
電子件的質量評定協調體系.空白詳細規范.軍用光纖和光纜連接器.環境等級VI |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Connectors for optical fibres and cables for military use - Environmental category VI) |
| BS EN 1861-1998 |
制冷系統和熱泵.系統流量圖,管道和設備圖.布局和符號 |
(Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols) |
| BS EN 186100-1995 |
電子器件質量評定體系.光纖光纜連接器件分規范.F-SMA型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Types F-SMA) |
| BS EN 186110-1995 |
電子器件質量評定體系.光纖光纜連接器件分規范.FC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type FC) |
| BS EN 186130-1996 |
電子件的質量評定體系.LSA型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Connector sets for optical fibres and cables - Type LSA) |
| BS EN 186150-1997 |
OCCA-BU型光學纖維織物和電纜用連接器成套設備 |
(Connector sets for optical fibres and cables - Type OCCA-BU) |
| BS EN 186160-1997 |
OCCA-PC型光學纖維織物和電纜用連接器成套設備 |
(Connector sets for optical fibres and cables - Type OCCA-PC) |
| BS EN 186170-1998 |
電子電氣器件質量評定體系.分規范.光纖和電纜連接裝置.RCC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC) |
| BS EN 186180-1996 |
電子件的質量評定體系.LSB型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Connector sets for optical fibres and cables - Type LSB) |
| BS EN 1862-1998 |
塑料管道系統.玻璃增強熱固塑料管(GRP).暴露于化學環境的隨后相關蠕變因子的測定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment) |
| BS EN 186210-1996 |
電子件質量評定協調體系.分規范:光纖和光纜用連接裝置.CF08型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type CF08) |
| BS EN 186220-1996 |
電子件的質量評定體系.LSC型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: Connector sets for optical fibres and cables - Type LSC) |
| BS EN 186230-1996 |
電子件的質量評定體系.LSF型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSF) |
| BS EN 186240-1996 |
光纖和光纜用MT型連接器組分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MT) |
| BS EN 186260-1998 |
電子器件質量評定協調體系.分規范:光纖和電纜連接件.SC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC) |
| BS EN 186270-1998 |
電子器件質量評定協調體系.分規范:光纖和電纜連接件.LSH型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH) |
| BS EN 186290-1998 |
電子器件質量評定協調體系.光纖和電纜連接件.MPO型 |
(Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO) |
| BS EN 1863-1-2000 |
建筑物用玻璃.熱增強鈉鈣玻璃.定義和說明 |
(Glass in buildings - Heat strengthened soda lime silicate glass - Definition and description) |
| BS EN 1863-2-2004 |
建筑玻璃.熱增強鈉鈣玻璃.合格評價.產品標準 |
|
| BS EN 1863-2-2004 |
建筑玻璃.熱增強鈉鈣玻璃.合格評價.產品標準 |
|
| BS EN 186300-1999 |
電子件的質量評定協調系統.分規范:光纖和電纜型MSC連接裝置 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC) |
| BS EN 186310-1999 |
電子件的質量評定協調體系.分規范:光纖和電纜的連接裝置.MF型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF) |
| BS EN 1864-1997 |
內河運輸船舶.輪機房和控制位置.型號和安全要求 |
(Inland navigation vessels - Wheelhouse and control position - Types, safety requirements) |
| BS EN 1865-2000 |
用于道路救護車的擔架和其它病人處理設備的規范 |
(Specifications for stretchers and other patient handling equipment used in road ambulances) |
| BS EN 1867-1997 |
機讀卡.保健應用.發卡人身分識別的計數系統和注冊過程 |
(Machine readable cards - Health care applications - Numbering system and registration procedure for issuer identifiers) |
| BS EN 1868-1997 |
防墜落人員保護設備.相同含義名稱表 |
(Personal protective equipment against falls from a height - List of equivalent terms) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com