標準號 |
中文名稱 |
英文名稱 |
| DD ENV 61072-1995 |
防電子樹起燃用絕緣材料的電阻評價試驗方法 |
Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees |
| DD ENV 61111-2002 |
電絕緣材料的鋪墊 |
Matting of insulating material for electrical purposes |
| DD ENV 61112-2002 |
電絕緣材料毯子 |
Blankets of insulating material for electrical purposes |
| DD ENV 61400-1-1995 |
風渦輪發電機組.第1部分:要求 |
Wind turbine generator systems. Safety requirements |
| DD ENV 623-4-1994 |
高技術陶瓷.整塊陶瓷.一般性能和結構性能.第4部分:表面粗糙度測定 |
Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of surface roughness |
| DD ENV 635-4-1997 |
膠合板.根據表面外觀分類.第4部分:精加工能力的媒介變數規則 |
Plywood. Classification by surface appearance. Plywood. Classification by surface appearance. Parameters of ability for finishing. Guideline |
| DD ENV 658-2-1993 |
高技術陶瓷.常溫下陶瓷復合材料的機械性能.第2部分:抗擠壓強度的測定 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of compressive strength |
| DD ENV 658-3-1993 |
高技術陶瓷.常溫下陶瓷復合材料的機械特性.抗撓強度的測定 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of flexural strength |
| DD ENV 658-4-1993 |
高技術陶瓷.常溫下陶瓷復合材料的機械特性.第4部分:用帶鋸齒的工具加壓載荷法對剪切強度的測定 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by compression loading of notched specimens |
| DD ENV 658-5-1993 |
高技術陶瓷.常溫下陶瓷復合材料的機械特性.第5部分:用短跨度拉伸試驗(三點)對剪切強度的測定 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by short span bend test (three point) |
| DD ENV 658-6-1993 |
高技術陶瓷.常溫下陶瓷復合材料的機械性能.用兩次沖剪法測定剪切強度 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by double-punch shearing |
| DD ENV 717-1-1999 |
木質板材.甲醛釋放量的測定.用容器方法控制甲醛的散發 |
Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the chamber method |
| DD ENV 725-11-1994 |
高技術陶瓷.陶瓷粉的試驗方法.關于自然燒結的密化測定 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the densification on natural sintering |
| DD ENV 725-2-1994 |
高效陶瓷.陶瓷粉末的檢驗方法.第2部分:鈦酸鋇中雜質含量的測定 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in barium titanate |
| DD ENV 725-4-1994 |
陶瓷新技術.陶瓷粉末試驗方法.用X射線熒光光譜分析測定氮化鋁中 的氧含量 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis |
| DD ENV 807-2001 |
木材防腐劑.耐微真菌軟腐蝕和其他土壤中微生物效果的測定 |
Wood preservatives. Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms |
| DD ENV 820-1-1994 |
高技術陶瓷.整體陶瓷試驗方法.熱機械特性.高溫下抗撓強度的測量 |
Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural strength at elevated temperatures |
| DD ENV 820-2-1994 |
高技術陶瓷.整塊陶瓷試驗方法.熱機械性能 |
(Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of self-loaded deformation) |
| DD ENV 820-3-1994 |
高技術陶瓷.整體陶瓷的試驗方法.熱機械特性.耐水淬硬引起熱震的強度測量 |
(Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of resistance to thermal shock by water quenching) |
| DD ENV 820-4-2002 |
高技術陶瓷.整體陶瓷的試驗方法.熱機械特性.在升溫條件下測定繞曲蠕變變形 |
(Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural creep deformation at elevated temperatures) |
| DD ENV 821-3-1994 |
高技術陶瓷.整塊陶瓷.熱物理性能.第3部分:比熱測定 |
(Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity) |
| DD ENV 839-1994 |
木材防腐劑.抗毀木擔子菌防治效果的測定 |
(Wood preservatives. Determination of the preventive efficacy against wood-destroying basidiomycete fungi) |
| DD ENV 843-2-1996 |
增強陶瓷.整體陶瓷.常溫下的機械性能.彈性模量 |
Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Determination of elastic moduli |
| DD ENV 843-3-1997 |
高效陶磁.整塊陶磁.室溫下機械性能.第3部分:從恒定應力率抗彎強度試驗中測定亞臨界裂縫擴大參數值 |
Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| DD ENV 843-4-1995 |
增強陶瓷.整體陶瓷.室溫機械特性.維氏,努氏和洛氏表面硬度試驗 |
Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperatures. Vickers, Knoop and Rockwell superficial hardness tests |
| DD ENV 843-5-1997 |
高級技術陶瓷.整體陶瓷.室溫下的機械試驗.第5部分:統計分析法 |
Advanced technical ceramics. Monolithic ceramics. Mechanical tests at room temperature. Statistical analysis |
| DD ENV 926-2-1999 |
滑翔設備.滑翔降落傘.要求和飛行試驗 |
Paragliding equipment. Paragliders. Requirements and flight tests |
| DD ENV 927-2-2000 |
涂料和清漆.外部木材用涂覆材料和涂覆系統.性能規范 |
Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification |
| DD ENV 955-4-1997 |
耐火產品的化學分析.第4部分:含有氧化硅(IV)和/或氧化鋁的產品(用燃燒原子吸收光譜法和感應耦合等離子體原子放射光譜儀進行分析) |
Chemical analysis of refractory products. Products containing silica and/or alumina (Analysis by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrography (ICP)) |
| DD ENV 993-11-1997 |
密度成型耐火材料試驗方法.熱擊抗性測定 |
Methods of test for dense shaped refractory products. Determination of resistance to thermal shock |
| DD ENV ISO 10722-1-1998 |
土工織物和相關產品.裝配時模擬損傷程序.粒狀材料中的裝配 |
(Geotextiles and geotextile-related products. Procedure for simulating damage during installation. Installation in granular materials) |
| DD ENV ISO 11079-1999 |
冷環境的評估.必備布罩隔熱性的測定(IREQ) |
Evaluation of cold environments. Determination of required clothing insulation (IREQ) |
| DD ENV ISO 11133-1-2000 |
食品和動物飼料微生物學.培養基質量保證和性能試驗指南.實驗室中培養基質量保證的通用指南 |
Microbiology of food and animal feeding stuffs. Guidelines on quality assurance and performance testing of culture media. General guidelines on quality assurance of culture media in the laboratory |
| DD ENV ISO 13438-2000 |
土工織物及其相關產品.測定抗氧化性的篩選試驗方法 |
(Geotextiles and geotextile-related products. Screening test method for determining the resistance to oxidation) |
| DD ENV ISO 13530-1999 |
水質.水分析的分析質量控制指南 |
(Water quality. Guide to analytical quality control for water analysis) |
| DD ENV ISO 14815-2000 |
道路運輸和交通遠程信息技術.自動車輛和設備識別.系統規范 |
(Road transport and traffic telematics. Automatic vehicle and equipment identification. System specification) |
| DD ENV ISO 14816-2000 |
道路運輸和交通遠程信息技術.自動車輛和設備識別.標準號和數據結構 |
(Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structures) |
| DD ENV ISO 14819-3-2001 |
交通業務和旅行信息(TTI).經由交通業務信息編碼的TTI信息.ALERT-C參考位置 |
(Traffic and travel information (TTI). TTI messages via traffic message coding. Location referencing for ALERT-C) |
| DD ENV ISO 14825-1997 |
地理數據文檔 |
(Geographic data files) |
| DD ENV ISO 14904-1997 |
道路運輸和交通遠程通訊及信息處理技術.自動取款設備.操作人員之間的清除用接口規范 |
(Road transport and traffic telematics. Automatic fee collection (AFC). Interface specification for clearing between operators) |
| DD ENV ISO 14906-1999 |
道路運輸和交通信息技術術語.電子自動收費機(EFC).專用于短范圍通信的應用界面定義 |
(Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Application interface definition for dedicated short range communications) |
| DD ENV ISO 14907-1-2001 |
道路運輸和交通遙測(RTTT).電子收費(EFC),用戶和固定設備的試驗過程.試驗過程的描述 |
(Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment. Description of test procedures) |
| DD ENV ISO/TR 13843-2001 |
水質.微生物法驗證指南 |
(Water quality. Guidance on validation of microbiological methods) |
| DIN CEN/TS 1071-10-2004 |
高級工業陶瓷.陶瓷涂層的試驗方法.第10部分:由橫切法測定涂層厚度 |
|
| DIN CEN/TS 1071-8-2004 |
高級工業陶瓷.陶瓷涂層的試驗方法.第8部分:粘性評價的洛氏亞痕試驗 |
|
| DIN CEN/TS 1071-9-2004 |
高級工業陶瓷.陶瓷涂層的試驗方法.第9部分:斷裂應變的測定 |
|
| DIN CEN/TS 1159-4-2004 |
高級工業陶瓷.陶瓷復合物.熱物理性能.第4部分:熱導性的測定 |
|
| DIN CEN/TS 12037-2004 |
木材防腐劑.暴露于露天的木材防腐劑的相關保護效果測定的現場試驗方法.水平搭接法 |
|
| DIN CEN/TS 12200-2-2003 |
地面上使用的雨水塑料管道系統.未增塑的聚氯乙烯聚丙烯(PVC-U).第2部分:合格評定指南 |
(Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12200-2:2003) |
| DIN CEN/TS 12983-2-2005 |
烹調器皿.爐子、炊具或爐罩上用的家用烹調器皿.第2部分:陶瓷、玻璃和玻璃陶瓷烹調器皿更多的一般要求和特殊要求 |
|
| DIN CEN/TS 12983-2-2005 |
烹調器皿.爐子、炊具或爐罩上用的家用烹調器皿.第2部分:陶瓷、玻璃和玻璃陶瓷烹調器皿更多的一般要求和特殊要求 |
|
| DIN CEN/TS 13126-1-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第1部分:所有類型配件的通用要求 |
|
| DIN CEN/TS 13126-10-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第10部分:力臂平衡系統 |
|
| DIN CEN/TS 13126-11-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第11部分:頂懸伸出翻轉五金 |
|
| DIN CEN/TS 13126-12-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第12部分:邊懸伸出翻轉五金 |
|
| DIN CEN/TS 13126-13-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第13部分:窗框平衡 |
|
| DIN CEN/TS 13126-14-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第14部分:窗框扣件 |
|
| DIN CEN/TS 13126-15-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第15部分:滑輪 |
|
| DIN CEN/TS 13126-16-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第16部分:提升和滑動系統配件 |
|
| DIN CEN/TS 13126-17-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第17部分:傾斜和滑動系統配件 |
|
| DIN CEN/TS 13126-2-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第2部分:窗銷把手 |
|
| DIN CEN/TS 13126-3-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第3部分:長插銷和滑鈕的操縱配件 |
|
| DIN CEN/TS 13126-4-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第4部分:長插銷 |
|
| DIN CEN/TS 13126-5-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第5部分:開窗限制設備 |
|
| DIN CEN/TS 13126-6-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第6部分:(有或無摩擦系統的)可變幾何形狀固定鉸鏈 |
|
| DIN CEN/TS 13126-7-2004 |
窗和落地窗用建筑五金和配件.要求和試驗方法.第7部分:指形拉手 |
|
| DIN CEN/TS 13126-8-2004 |
窗和落地窗用建筑物五金和配件.要求和試驗方法.第8部分:傾斜和旋轉、先傾斜和只旋轉的五金 |
|
| DIN CEN/TS 13126-9-2004 |
窗和門高窗戶的建筑物五金和配件.要求和試驗方法.第9部分:尖軸鉸鏈 |
|
| DIN CEN/TS 13130-10-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第10部分:食物模擬物中丙烯酰胺的測定 |
|
| DIN CEN/TS 13130-11-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第11部分:食物模擬物中11-氨基十一(烷)酸的測定 |
|
| DIN CEN/TS 13130-12-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第12部分:食物模擬物中1,3-苯二甲胺的測定 |
|
| DIN CEN/TS 13130-13-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第13部分:食物模擬物中2,2-雙4-羥苯基丙烷(雙酚A型)的測定 |
|
| DIN CEN/TS 13130-14-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第14部分:食物模擬物中3,3-雙3-甲基-4-羥苯基-2-吲哚滿的測定 |
|
| DIN CEN/TS 13130-15-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第15部分:食物模擬物中1,3-丁二烯的測定 |
|
| DIN CEN/TS 13130-16-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第16部分:食物模擬物中己內酰胺和己內酰胺鹽的測定 |
|
| DIN CEN/TS 13130-17-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第17部分:塑料中碳酰氯的測定 |
|
| DIN CEN/TS 13130-18-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第18部分:食品模擬物中1,2-苯二酚、1,3-苯二酚、1,4-苯二酚、4,4-二羥二苯甲酮和4,4-二羥聯苯的測定 |
|
| DIN CEN/TS 13130-19-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第19部分:食品模擬物中二甲胺乙醇的測定 |
|
| DIN CEN/TS 13130-20-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第20部分:塑料中3-氯-1,2-環氧丙烷的測定 |
|
| DIN CEN/TS 13130-21-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第21部分:食品模擬物中1,2-乙二胺和己二胺的測定 |
|
| DIN CEN/TS 13130-22-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第22部分:塑料中環氧乙烷和氧化丙烯的測定 |
|
| DIN CEN/TS 13130-23-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第23部分:食品模擬物中甲醛和六亞甲基四胺的測定 |
|
| DIN CEN/TS 13130-24-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第24部分:食品模擬物中馬來酸和順式丁烯二酸酐的測定 |
|
| DIN CEN/TS 13130-25-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第25部分:食品模擬物中4-甲基-1-戊烯的測定 |
|
| DIN CEN/TS 13130-26-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第26部分:食品模擬物中1-辛烯和四氫呋喃的測定 |
|
| DIN CEN/TS 13130-27-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第27部分:食品模擬物中2,4,6-三氨基-1,3,5-三嗪的測定 |
|
| DIN CEN/TS 13130-28-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第28部分:食品模擬物中1,1,1-三甲基丙烷的測定 |
|
| DIN CEN/TS 13130-9-2005 |
接觸食料的材料和物品.可塑性物質允許極限.第9部分:食物模擬物中醋酸和乙烯基酯的測定 |
|
| DIN CEN/TS 13149-6-2005 |
公共運輸.道路車輛調度和控制系統.第6部分:CAN文電內容；英文版本 CEN/TS 13149-6-2005 |
|
| DIN CEN/TS 13354-2003 |
實心木制板材.粘結質量.試驗方法 |
(Solid wood panels - Bonding quality - Test method; German version CEN/TS 13354:2003) |
| DIN CEN/TS 13388-2004 |
銅和銅合金.產品和組分概要 |
|
| DIN CEN/TS 13778-2004 |
移動式拆除機械.安全要求 |
|
| DIN CEN/TS 13853-2004 |
聯合運輸用交換部件.C 745-S16類型的可堆放交換部件.尺寸、設計要求和試驗 |
|
| DIN CEN/TS 14038-1-2005 |
加筋混凝土的電化學realkalization和氯化物萃取處理.第1部分:realkalization |
|
| DIN CEN/TS 14234-2003 |
與食品接觸的材料和物品.紙和紙板的聚合涂層.總遷移的條件和試驗方法的選擇指南 |
(Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14234:2002) |
| DIN CEN/TS 14235-2003 |
與食品接觸的材料和物品.金屬基質的聚合涂層.總遷移的條件和試驗方法的選擇指南 |
(Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14235:2002) |
| DIN CEN/TS 14397-1-2004 |
肥料和石灰材料.二氧化碳的測定.第1部分:固體肥料法 |
|
| DIN CEN/TS 14405-2004 |
廢棄物表征.浸出性能試驗.上流滲透試驗(在規定條件下) |
|
| DIN CEN/TS 14425-5-2004 |
高級工業陶瓷.單片陶瓷斷裂韌性測定的試驗方法.第5部分:單邊V形切口束法 |
|
| DIN CEN/TS 14441-2005 |
郵政服務.郵件集合.建立、處理和追蹤 |
|
| DIN CEN/TS 14472-1-2003 |
彈性、紡織和疊層地板覆蓋物.設計、制備和鋪設.第1部分:總則 |
(Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General; German version CEN/TS 14472-1:2003) |
| DIN CEN/TS 14472-2-2003 |
彈性、紡織和疊層地板覆蓋物.設計、制備和鋪設.第2部分:鋪地織物 |
(Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings; German version CEN/TS 14472-2:2003) |
| DIN CEN/TS 14472-3-2003 |
彈性、紡織和疊層地板覆蓋物.設計、制備和鋪設.第3部分:疊層地板覆蓋物 |
(Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 3: Laminate floor coverings; German version CEN/TS 14472-3:2003) |
| DIN CEN/TS 14472-4-2003 |
彈性、紡織和疊層地板覆蓋物.設計、制備和鋪設.第4部分:彈性地板覆蓋物 |
(Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 4: Resilient floor coverings; German version CEN/TS 14472-4:2003) |
| DIN CEN/TS 14494-2003 |
皮革.化學試驗.五氯苯酚含量的測定 |
(Leather - Chemical tests - Determination of pentachlorophenol content; German version CEN/TS 14494:2003) |
| DIN CEN/TS 14495-2003 |
皮革.化學試驗.六價鉻含量的測定 |
(Leather - Chemical tests - Determination of chromium VI content; German version CEN/TS 14495:2003) |
| DIN CEN/TS 14507-1-2003 |
氧化氮吸入系統.第1部分:傳送系統 |
(Nitric oxide inhalational systems - Part 1: Delivery systems; German version CEN/TS 14507-1:2003) |
| DIN CEN/TS 14507-2-2003 |
氧化氮吸入系統.第2部分:供應系統 |
(Inhalational nitric oxide systems - Part 2: Supply systems; German version CEN/TS 14507-2:2003) |
| DIN CEN/TS 1456-2-2003 |
壓力下直埋式和地上排水和排污用塑料管道系統.未增塑聚氯乙烯(PVC-U).第2部分:符合性評定指南 |
(Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1456-2:2003) |
| DIN CEN/TS 14567-2004 |
郵政服務.郵件的自動處理.地址碼定位器 |
|
| DIN CEN/TS 14577-2004 |
接觸食品的材料和物質.塑料.聚合添加劑.1000道爾頓以下的聚合添加劑質量系數測定的試驗方法 |
|
| DIN CEN/TS 14588-2004 |
固體生物燃料.術語、定義和描述 |
|
| DIN CEN/TS 14631-2005 |
郵政服務.容器和包裝物的自動鑒別.容器資產標準號 |
|
| DIN CEN/TS 14751-2005 |
焊接.焊接檢驗用飛行時間衍射技術的使用 |
|
| DIN CEN/TS 14773-2004 |
郵政服務.服務質量.通過試驗信件的調查測量優先和一級單件郵件的丟失和延遲 |
|
| DIN CEN/TS 14774-1-2004 |
固體生物燃料.水含量的測定方法.爐干燥法.第1部分:總水分.參照法 |
|
| DIN CEN/TS 14774-2-2004 |
固體生物燃料.水含量的測定方法.爐干燥法.第2部分:總水分.簡化法 |
|
| DIN CEN/TS 14774-3-2004 |
固體生物燃料.水含量的測定方法.爐干燥法.第3部分:一般分析樣品中的水分 |
|
| DIN CEN/TS 14775-2004 |
固體生物燃料.灰分含量的測定方法 |
|
| DIN CEN/TS 14780-2005 |
固體生物燃料.樣品制備方法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com