標準號 |
中文名稱 |
英文名稱 |
| DIN EN 10217-3-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第3部分:細粒合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002) |
| DIN EN 10217-4-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第4部分:具有低溫下規定性能的電焊非合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002) |
| DIN EN 10217-5-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第5部分:具有較高溫度下規定性能的埋弧焊接非合金和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002) |
| DIN EN 10217-6-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第6部分:具有低溫下規定性能的埋弧焊接非合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002) |
| DIN EN 10217-7-2005 |
壓力用途焊接鋼管.交貨技術條件.第7部分:不銹鋼管 |
|
| DIN EN 10217-7-2005 |
壓力用途焊接鋼管.交貨技術條件.第7部分:不銹鋼管 |
|
| DIN EN 10218-1-1994 |
鋼絲和線材產品.概述.第1部分:檢驗方法 |
(Steel wire and wire products; general; part 1: test methods; German version EN 10218-1:1994) |
| DIN EN 10218-2-1996 |
鋼絲和線材產品.概述.第2部分:線材尺寸和公差 |
(Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218:1996) |
| DIN EN 10219-1-1997 |
非合金結構鋼和細晶粒結構鋼的冷成形結構空心型材.第1部分:交貨技術要求 |
(Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements; German version EN 10219-1:1997) |
| DIN EN 10219-2-1997 |
非合金結構鋼和細晶粒結構鋼的冷成形結構空心型材.第2部分:公差,尺寸和分段性能 |
(Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:1997) |
| DIN EN 1022-1997 |
居室家具.可就坐的家具.穩定性測試 |
(Domestic furniture - Seatings - Determination of stability; German version EN 1022:1996) |
| DIN EN 1022-2005 |
居室家具.座椅.穩定性測定 |
|
| DIN EN 10220-2003 |
無縫鋼管.單位長度尺寸重量通用表 |
(Seamless and welded steel tubes - General tables of dimensions and masses per unit length; German version EN 10220:2002) |
| DIN EN 10221-1996 |
熱軋鋼棒和線材的表面質量等級.交貨技術條件 |
(Surface quality classes for hot-rolled round bars and rods - Technical delivery conditions; German version EN 10221:1995) |
| DIN EN 10222-1-2002 |
壓力容器用鋼鍛件.第1部分:自由成型鍛件的一般要求 |
(Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002); German version EN 10222-1:1998 + A1:2002) |
| DIN EN 10222-2-2000 |
壓力容器用鋼鍛件.第2部分:特定高溫性能的鐵素體和馬氏體鋼 |
(Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (including corrigendum AC:2000); German version EN 10222-2:1999 + AC:2000) |
| DIN EN 10222-3-1999 |
壓力罐用鋼制鍛件.第3部分:低溫下有確定性能的鎳鋼 |
(Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties; German version EN 10222-3:1998) |
| DIN EN 10222-4-2001 |
壓力容器用鋼鍛件.第4部分:高彈限強度的可焊接細晶粒鋼 |
(Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001) |
| DIN EN 10222-5-2000 |
壓力容器用鋼鍛件.第5部分:馬氏體、奧氏體和奧氏體鐵素體不銹鋼 |
(Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999) |
| DIN EN 10223-1-1998 |
柵欄用鋼絲和鋼絲制品.第1部分:鋅和鋅合金涂層的有刺鋼絲 |
(Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire; German version EN 10223-1:1997) |
| DIN EN 10223-2-1998 |
柵欄用鋼絲和鋼絲制品.第2部分:農業,隔離和柵欄用六角網目鋼絲編織物 |
(Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes; German version EN 10223-2:1997) |
| DIN EN 10223-2-2004 |
柵欄用鋼絲和鋼絲制品.第2部分:農用隔離和柵欄用六角形鋼絲網 |
|
| DIN EN 10223-3-1998 |
柵欄用鋼絲和鋼絲制品.第3部分:建筑用帶六角網目的鋼絲編織物 |
(Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes; German version EN 10223-3:1997) |
| DIN EN 10223-4-1998 |
柵欄用鋼絲和鋼絲制品.第4部分:柵欄用鋼絲焊接的格網 |
(Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing; German version EN 10223-4:1998) |
| DIN EN 10223-5-1998 |
柵欄用鋼絲和鋼絲制品.第5部分:柵欄用鋼絲鉸鏈網格和結節網格 |
(Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing; German version EN 10223-5:1998) |
| DIN EN 10223-6-1998 |
柵欄用鋼絲和鋼絲制品.第6部分:柵欄用正方形網目的鋼絲編織物 |
(Steel wire and wire products for fences - Part 6: Steel wire chain link fencing; German version EN 10223-6:1998) |
| DIN EN 10223-7-2003 |
欄柵用鋼絲和鋼絲制品.第7部分:欄柵用焊接鋼絲板條 |
(Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing; German version EN 10223-7:2002) |
| DIN EN 10224-2005 |
水和其他水成液輸送用非合金管和配件.交貨技術條件 |
|
| DIN EN 10225-2002 |
固定近海結構的可焊接結構鋼.技術交貨條件 |
(Weldable structural steels for fixed offshore structures - Technical delivery conditions; German version EN 10225:2001) |
| DIN EN 10226-1-2004 |
有壓力緊固連接件的管道螺紋.第1部分:錐形外螺紋和平行內螺紋.尺寸、公差和名稱與符號 |
|
| DIN EN 10226-3-2005 |
螺紋上有壓力密封接縫的管螺紋.第3部分:通過極限量規驗證 |
|
| DIN EN 10226-3-2005 |
螺紋上有壓力密封接縫的管螺紋.第3部分:通過極限量規驗證 |
|
| DIN EN 10228-1-1999 |
鋼鍛件的無損檢驗.第1部分:磁粉探傷 |
(Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection; German version EN 10228-1:1999) |
| DIN EN 10228-2-1998 |
鋼鍛件的無損檢驗.第2部分:滲透檢驗 |
(Non-destructive testing of steel forgings - Part 2: Penetrant testing; German version EN 10228-2:1998) |
| DIN EN 10228-3-1998 |
鋼制鍛件的無損檢驗.第3部分:鐵氧體鋼制或馬氏體鋼制鍛件的超聲波試驗 |
(Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings; German version EN 10228-3:1998) |
| DIN EN 10228-4-1999 |
鋼鍛件的無損檢驗.第4部分:奧氏和奧氏鐵氧體非合金鋼鍛件的超聲波檢驗 |
(Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999) |
| DIN EN 10229-1998 |
評定鋼制品抗氫感應形成裂紋的性能(HIC) |
(Evaluation of resistance of steel products to hydrogen induced cracking (HIC); German version EN 10229:1998) |
| DIN EN 1023-1-1996 |
辦公室家具.隔斷墻板.第1部分:尺寸 |
(Office furniture - Screens - Part 1: Dimensions; German version EN 1023-1:1996) |
| DIN EN 1023-2-2001 |
辦公室家具.隔斷墻板.第2部分:機械安全要求 |
(Office furniture - Screens - Part 2: Mechanical safety requirements; German version EN 1023-2:2000) |
| DIN EN 1023-3-2001 |
辦公室家具.隔斷墻板.第3部分:試驗方法 |
(Office furniture - Screens - Part 3: Test methods; German version EN 1023-3:2000) |
| DIN EN 10230-1-2000 |
鋼絲釘.第1部分:一般用途的散裝釘 |
(Steel wire nails - Part 1: Loose nails for general applications; German version EN 10230-1:1999) |
| DIN EN 10232-1994 |
金屬材料.管材(管截面).彎曲試驗 |
(Metallic materials; tube (in full section); bend test; German version EN 10232:1993) |
| DIN EN 10233-1994 |
金屬材料.管材.環形折曲試驗 |
(Metallic materials; tube; flattening test; German version EN 10233:1993) |
| DIN EN 10234-1994 |
金屬材料.管材.擴管試驗 |
(Metallic materials; tube; drift expanding test; German version EN 10234:1993) |
| DIN EN 10235-1994 |
金屬材料.管材.折緣試驗 |
(Metallic materials; tube; flanging test; German version EN 10235:1993) |
| DIN EN 10236-1994 |
金屬材料.管材.擴管試驗 |
(Metallic materials; tube; ring expanding test; German version EN 10236:1993) |
| DIN EN 10237-1994 |
金屬材料.管.環狀試樣拉力試驗. |
(Metallic materials; tube; ring tensile test; German version EN 10237:1993) |
| DIN EN 10238-1996 |
結構鋼制經自動噴射和自動涂層處理的產品 |
(Automatically blast-cleaned and automatically prefabrication primed structural steel products; German version EN 10238:1996) |
| DIN EN 1024-1997 |
不連續鋪設用粘土屋頂磚.幾何特性測定 |
(Clay roofing tiles for discontinous laying - Determination of geometric characteristics; German version EN 1024:1997) |
| DIN EN 10240-1998 |
鋼管用內部和/或外部防護涂層.通過在自動設備中熱浸鍍錫進行的涂層的規定 |
(Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997) |
| DIN EN 10241-2000 |
螺紋鋼管 |
(Steel threaded pipe; German version EN 10241:2000) |
| DIN EN 10242-1995 |
可鍛鑄鐵制螺紋管件 |
(Threaded pipe fittings in malleable cast iron; German version EN 10242:1994) |
| DIN EN 10242/A1-1999 |
可鍛鑄鐵制螺紋管件.修正A1 |
(Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999) |
| DIN EN 10242/A2-2003 |
可鍛鑄鐵制螺紋管件.修正A2 |
(Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003) |
| DIN EN 10243-1 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第1部分:落錘鍛造件和垂直壓力鍛造件 |
|
| DIN EN 10243-1 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第1部分:落錘鍛造件和垂直壓力鍛造件 |
|
| DIN EN 10243-1-2000 |
鋼熱模鍛件.尺寸公差.第1部分:落錘鍛造和垂直壓力鍛造 |
(Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999) |
| DIN EN 10243-2 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第2部分:在水平鍛造機上的頂鍛 |
|
| DIN EN 10243-2 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第2部分:在水平鍛造機上的頂鍛 |
|
| DIN EN 10243-2-2000 |
鋼熱模鍛件.尺寸公差.第2部分:在水平鍛造機器上的頂鍛 |
(Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999) |
| DIN EN 10244-1-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第1部分:一般規則 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; German version EN 10244-1:2001) |
| DIN EN 10244-2-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第2部分:鋅和鋅合金涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2001) |
| DIN EN 10244-3-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第3部分:鋁涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001) |
| DIN EN 10244-4-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第4部分:錫涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; German version EN 10244-4:2001) |
| DIN EN 10244-5-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第5部分:鎳涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; German version EN 10244-5:2001) |
| DIN EN 10244-6-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第6部分:銅、青銅和黃銅涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; German version EN 10244-6:2001) |
| DIN EN 10245-1-2001 |
鋼線和鋼線產品.鋼線上的有機涂層.第1部分:一般規則 |
(Steel wire and wire products - Organic coatings on wire - Part 1: General rules; German version EN 10245-1:2001) |
| DIN EN 10245-2-2001 |
鋼線和鋼線產品.鋼線上的有機涂層.第2部分:PVC涂層線 |
(Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; German version EN 10245-2:2001) |
| DIN EN 10245-3-2001 |
鋼絲和鋼絲產品.鋼絲上的有機涂層.第3部分:聚乙烯(PE)涂層絲 |
(Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; German version EN 10245-3:2001) |
| DIN EN 10245-4-2003 |
鋼絲和鋼絲產品.鋼絲上的有機涂層.第4部分:聚酯涂層絲 |
(Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2003) |
| DIN EN 10246-1-1996 |
鋼管的無損檢測.第1部分:證明密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 |
(Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996) |
| DIN EN 10246-10 Berichtigung 1-2001 |
DINEN10246-10的勘誤 |
(Corrigenda to DIN EN 10246-10:2000-07) |
| DIN EN 10246-10-2000 |
鋼管的無損檢驗.第10部分:缺陷探測用自動熔融電弧焊接鋼管焊縫的放射線檢驗 |
(Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; German version EN 10246-10:2000) |
| DIN EN 10246-11-2000 |
鋼管的無損試驗.第11部分:表面缺陷探測用的無縫和焊接鋼管的液體滲透試驗 |
(Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; German version EN 10246-11:2000) |
| DIN EN 10246-12-2000 |
鋼管的無損檢驗.第12部分:表面缺陷探測用無縫和焊接鐵磁鋼管的磁粉探傷 |
(Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; German version EN 10246-12:2000) |
| DIN EN 10246-13-2000 |
鋼管的無損檢驗.第13部分:無縫和焊接(埋弧焊除外)鋼管的自動全周超聲波測厚檢驗 |
(Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; German version EN 10246-13:2000) |
| DIN EN 10246-14-2000 |
鋼管的無損試驗.第14部分:無縫和焊接鋼管(埋頭焊接除外)疊層缺陷檢測的自動超聲波試驗.德文版本EN10246-14: |
(Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; German version EN 10246-14:1999) |
| DIN EN 10246-15-2000 |
鋼管的無損檢驗.第15部分:用于檢測層狀缺陷的焊接鋼管生產時用的帶材/板材的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; German version EN 10246-15:2000) |
| DIN EN 10246-16-2000 |
鋼管的無損檢驗.第16部分:層狀缺陷檢測用焊接鋼管焊縫區域的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; German version EN 10246-16:2000) |
| DIN EN 10246-17-2000 |
鋼管的無損檢驗.第17部分:層狀缺陷檢測用無縫和焊接鋼管管端的超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; German version EN 10246-17:2000) |
| DIN EN 10246-18-2000 |
鋼管的無損檢驗.第18部分:層狀缺陷檢測用無縫和焊接鐵磁鋼管管端的磁粉探傷 |
(Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000) |
| DIN EN 10246-2-2000 |
鋼管的無損試驗.第2部分:證明液壓滲漏緊密性的無縫和焊接(埋弧焊接除外)的奧氏體和鐵素體/奧氏體鋼管的自動 |
(Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:20 |
| DIN EN 10246-3-2000 |
鋼管的無損試驗.第3部分:無縫和焊接鋼管(埋弧焊接除外)缺陷檢測的自動渦電流試驗.德文版本EN10246-3:1999 |
(Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999) |
| DIN EN 10246-4-2000 |
鋼管的無損檢驗.第4部分:橫向不完整性檢測用鐵磁無縫鋼管的自動全外圍磁換能器檢驗/磁漏檢驗 |
(Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999) |
| DIN EN 10246-5-2000 |
鋼管的無損檢驗.第5部分:縱向不完整性檢測用鐵磁無縫和焊接(埋弧焊接除外)鋼管的自動全外圍磁換能器檢驗/磁 |
(Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German ver |
| DIN EN 10246-6-2000 |
鋼管的無損試驗.第6部分:無縫鋼管橫向缺陷探測的自動全周長超聲波試驗 |
(Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999) |
| DIN EN 10246-7-1996 |
鋼管的無損檢測.第7部分:證明長度誤差用整個管圓周上無縫和焊接鐵磁鋼管(埋弧焊除外)的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal imperfections; German version EN 10246-7:1996) |
| DIN EN 10246-7-2005 |
鋼管的無損檢驗.第7部分:無縫和焊接鋼管(埋弧焊除外)縱向缺陷檢測用全圓周自動超聲波檢驗 |
|
| DIN EN 10246-8-2000 |
鋼管的無損試驗.第8部分:電焊鋼管焊縫徑向缺陷探測的自動超聲試驗 |
(Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; German version EN 10246-8:1999) |
| DIN EN 10246-9-2000 |
鋼管的無損試驗.第9部分:徑向和/或橫向缺陷探測用的埋弧焊鋼管的自動超聲試驗 |
(Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfections; German version EN 10246-9:2000) |
| DIN EN 10248-1-1995 |
非合金鋼制熱軋板樁.第1部分:交貨技術條件 |
(Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions; German version EN 10248-1:1995) |
| DIN EN 10248-2-1995 |
非合金鋼制熱軋板樁.第2部分:極限尺寸和外形公差 |
(Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions; German version EN 10248-2:1995) |
| DIN EN 10249-1-1995 |
非合金鋼制冷成型板樁.第1部分:交貨技術條件 |
(Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions; German version EN 10249-1:1995) |
| DIN EN 10249-2-1995 |
非合金鋼制冷成型板樁.第2部分:極限尺寸和外形公差 |
(Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions; German version EN 10249-2:1995) |
| DIN EN 10250-1-1999 |
通用工程用開式模鍛鋼件.第1部分:一般要求 |
(Open die steel forgings for general engineering purposes - Part 1: General requirements; German version EN 10250-1-1999) |
| DIN EN 10250-2-1999 |
通用工程用開式模鍛鋼件.第2部分:非合金質量級鋼和特種鋼 |
(Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels; German version EN 10250-2:1999) |
| DIN EN 10250-3-1999 |
通用工程用開式模鍛鋼件.第3部分:特種合金鋼 |
(Open die steel forgings for general engineering purposes - Part 3: Alloy special steels; German version EN 10250-3-1999) |
| DIN EN 10250-4-2000 |
通用工程用開式模鍛鋼件.第4部分:不銹鋼 |
(Open die steel forgings for general engineering purposes - Part 4: Stainless steels; German version EN 10250-4:1999) |
| DIN EN 10251-1997 |
磁性材料.測定電工鋼片和電工鋼帶幾何特性值的方法 |
(Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip; German version EN 10251:1997) |
| DIN EN 10252-1997 |
磁性材料.中等頻率下電工鋼片和電工鋼帶的磁性測量的方法 |
(Magnetic materials - Methods of measurement of magnetic properties of electrical steel sheet and strip at medium frequencies; German version EN 10252:1997) |
| DIN EN 10253-1-1999 |
對焊管配件.第1部分:一般用途和無特定檢驗要求的鍛造碳鋼 |
(Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999) |
| DIN EN 10254-2000 |
閉模鍛造的鋼鍛件.通用技術交貨條件 |
(Steel closed die forgings - General technical delivery conditions; German version EN 10254:1999) |
| DIN EN 10255-2004 |
焊接和螺紋用非合金鋼管.交貨技術條件 |
|
| DIN EN 10256-2000 |
鋼管的無損檢驗.1級和2級檢驗師的合格證明及能力 |
(Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel; German version EN 10256:2000) |
| DIN EN 10257-1-1998 |
電流電纜和通信電纜加固用鋅或鋅合金涂層的非合金鋼絲.第1部分:地下鋪設的電纜 |
(Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998) |
| DIN EN 10257-2-1998 |
電流電纜和通信電纜加固用鋅或鋅合金涂層的非合金鋼絲.第2部分:海底電纜 |
(Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998) |
| DIN EN 10258-1997 |
冷軋不銹鋼窄帶材和剪切長度.極限尺寸和外形公差 |
(Cold-rolled stainless steel narrow strip and cut lenghts - Tolerances on dimensions and shape; German version EN 10258:1997) |
| DIN EN 10259-1997 |
冷軋不銹鋼寬帶材和薄板.極限尺寸和外形公差 |
(Cold-rolled stainless steel wide strip and plate/sheet - Tolerances on dimensions and shape; German version EN 10259:1997) |
| DIN EN 1026-2000 |
門窗.透氣率.試驗方法 |
(Windows and doors - Air permeability - Test method; German version EN 1026:2000) |
| DIN EN 10263-1-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第1部分:一般交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions; German version EN 10263-1:2001) |
| DIN EN 10263-2-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第2部分:冷處理后不用于熱處理的鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working; German version EN 10263-2:2001) |
| DIN EN 10263-3-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第3部分:表面硬化鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels; German version EN 10263-3:2001) |
| DIN EN 10263-4-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第4部分:淬火和回火鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering; German version EN 10263-4:2001) |
| DIN EN 10263-5-2002 |
冷鐓和冷擠壓的鋼桿材、棒材和線材.第5部分:不銹鋼的交貨技術條件 |
(Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels; German version EN 10263-5:2001) |
| DIN EN 10264-1-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.第1部分:一般要求 |
(Steel wire and wire products - Steel wire for ropes - Part 1: General requirements; German version EN 10264-1:2002) |
| DIN EN 10264-2-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.第2部分:一般繩索用的冷拉非合金鋼絲 |
(Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloyed steel wire for ropes for general applications; German version EN 10264-2:2002) |
| DIN EN 10264-3-2003 |
鋼絲和鋼絲產品.鋼絲繩用鋼絲.第3部分:3:重型裝置用圓形和異型非合金鋼絲 |
(Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications; German version EN 10264-3:2002) |
| DIN EN 10264-4-2002 |
鋼絲和鋼絲產品.繩索用鋼絲.第4部分:不銹鋼鋼絲 |
(Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire; German version EN 10264-4:2002) |
| DIN EN 10265-1996 |
磁性材料.確定機械性能和磁性能的薄鋼板和帶鋼的要求 |
(Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability; German version EN 10265:1995) |
| DIN EN 10267-1998 |
由熱變形溫度產生的沉淀硬化鐵氧-珠光體鋼 |
(Ferritc-pearlitic steels for precipitation hardening from hot-working temperatures; German version EN 10267:1998) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com