標準號 |
中文名稱 |
英文名稱 |
| DIN EN 60146-1-1-1994 |
半導體變流器.第1部分:電網換相變流器和一般要求.第1節:基本要求規范 |
(Semiconductor convertors; general requirements and line-commutated convertors; part 1-1: specifications of basic requirements (IEC 60146-1-1:1991); German version EN 60146-1-1:1993) |
| DIN EN 60146-1-1/A1-1998 |
半導體變流器.電網換相變流器和一般要求.第1-1部分:基本要求規范.修正件A1 |
(Semiconductor convertors - General requirements and line-commutated convertors - Part 1-1: Specifications of basic requirements: Amendment A1; (IEC 60146-1-1:1991/A1:1996); German version EN 60146-1-1:1993/A1:1997) |
| DIN EN 60146-1-3-1994 |
半導體變流器.第1部分:電網換相變流器和一般要求.第3節:變壓器和電抗器 |
(Semiconductor convertors; general requirements and line-commutated convertors; part 1-3: transformers and reactors (IEC 60146-1-3:1991); German version EN 60146-1-3:1993) |
| DIN EN 60146-2-2001 |
半導體變換器.第2部分:包括直流變換器的自整流半導體變換器 |
(Semiconductor convertors - Part 2: Self-commutated semiconductor convertors including direct d.c. convertors (IEC 60146-2:1999); German version EN 60146-2:2000) |
| DIN EN 60154-1-1995 |
波導法蘭盤.第1部分:一般要求 |
(Flanges for waveguides - Part 1: General requirements (IEC 60154-1:1982 + A1:1993); German version EN 60154-1:1994 + A1:1994) |
| DIN EN 60154-2-1998 |
波導管用法蘭盤.第2部分:矩形波導用法蘭盤的一般要求 |
(Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides (IEC 60154-2:1980 + A1:1997); German version EN 60154-2:1997 + A1:1997) |
| DIN EN 60155-1996 |
熒光燈用起輝器 |
(Glow-starters for fluorescent lamps (IEC 60155:1993); German version EN 60155:1995) |
| DIN EN 60155/A1-1996 |
熒光燈啟動器 |
(Glow-starters for fluorescent lamps (IEC 60155:1993/A1:1995); German version EN 60155:1995/A1:1995) |
| DIN EN 60156-1996 |
絕緣液.電源頻率下?lián)舸╇妷簻y(cè)定.檢驗法 |
(Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156:1995); German version EN 60156:1995) |
| DIN EN 60168-2001 |
額定電壓1kV以上的系統用陶瓷材料或玻璃制室內和室外架空支承絕緣子的試驗 |
(Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV (IEC 60168:1994 + A1:1997 + A2:2000); German version EN 60168:1994 + A1:1997 + A2:2000) |
| DIN EN 60169-21-1998 |
射頻連接器.第21部分:外導體內徑為9.5mm(0.374in),不同型式的螺紋連接,特性阻抗為50Ω、兩種型式的射頻連接 |
(Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (O,374 in) with different versions of screw coupling - Characteristic impedance 50(Types SC-A and SC-B) (IEC 60169-21:1985 + A1:19 |
| DIN EN 60169-23-1994 |
射頻連接器.第23部分:外導體內徑3.5mm(0.1378in)用于3.5mm剛性同軸電纜線路的插銷插座式射頻連接器 |
(Radio-frequency connectors; part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (IEC 60169-23:1991); German version EN 60169-23:1993) |
| DIN EN 60169-24-1994 |
射頻連接器.第24部分:一般用于75歐姆電纜分配系統(F型)螺紋聯接的射頻同軸連接器 |
(Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) (IEC 60169-24:1991); German version EN 60169-24:1993) |
| DIN EN 60169-25-1994 |
射頻連接器.第25部分:外導體直徑為13.56mm(0.534in)(TWHN型)雙內導體屏蔽平衡電纜配(3/4-20UNEF)雙極螺絲偶 |
(Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 601 |
| DIN EN 60172-1995 |
測定漆包繞組線溫度指數的試驗規程 |
(Test procedure for the determination of the temperature index of enamelled winding wires (IEC 60172:1987); German version EN 60172:1994) |
| DIN EN 60172/A1-1998 |
測定漆包繞組線溫度指數的試驗方法.修訂件A1 |
(Test procedure for the determination of the temperature index of enamelled winding wires; Amendment A1 (IEC 60172:1987/A1:1997); German version EN 60172:1994/A1:1998) |
| DIN EN 60188-2002 |
高壓汞蒸氣燈.性能規范 |
(High-pressure mercury vapour lamps - Performance specifications (IEC 60188:2001); German version EN 60188:2001) |
| DIN EN 60191-3 Bb.1-2003 |
半導體器件的機械標準化.第3部分:集成線路輪廓繪圖制備的一般規則.補充件1:術語摘要 |
(Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits; Supplement 1: Extract of the terms) |
| DIN EN 60191-3-2000 |
半導體裝置的機械標準.第3部分:集成線路輪廓繪圖準備的一般規則 |
(Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits (IEC 60191-3:1999); German version EN 60191-3:1999) |
| DIN EN 60191-4-2003 |
半導體器件的機械標準化.第4部分:半導體器件封裝用封裝外殼的規定和分類 |
(Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages (IEC 60191-4:1999 + A1:2001 + A2:2002); German version EN 60191-4:1999 + A1:2002 + A2:2002) |
| DIN EN 60191-6-10-2004 |
半導體器件的機械標準化.第6-10部分:表面安裝半導體器件封裝外形圖繪制的一般原則.P-VSON的尺寸 |
|
| DIN EN 60191-6-12-2003 |
半導體器件的機械標準化.第6-12部分:表面安裝半導體器件封裝外形圖繪制的一般規則.小節距柵極矩陣列的設計 |
(Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine-pitch land grid array (FLGA); Rectangular type (IEC 60191-6-12: |
| DIN EN 60191-6-2-2002 |
半導體器件的機械標準化.第6-2部分:繪制表面安裝半導體器件封裝外形圖的一般規則.1.5mm、1.27mm和1.00mm樹 |
(Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages |
| DIN EN 60191-6-3-2001 |
半導體裝置的機械標準化.第6-3部分:半導體裝置包裝的表面固定的繪圖制備的一般規則.包裝尺寸的測量方法 |
(Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quat flat packs (QFP) (IEC 60191-6-3:2000) |
| DIN EN 60191-6-4-2004 |
半導體器件的機械標準化.第6-4部分:表面安裝半導體器件封裝外形圖繪制的一般規則.焊球網格陣列(BGA)封裝尺 |
(Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA) (IEC 60191-6-4:200) |
| DIN EN 60191-6-4-2004 |
半導體器件的機械標準化.第6-4部分:表面安裝半導體器件封裝外形圖繪制的一般規則.焊球網格陣列(BGA)封裝尺寸的測量方法 |
|
| DIN EN 60191-6-5-2002 |
半導體器件的機械標準化.第6-5部分:表面安裝半導體器件外殼外形圖繪制的一般規則.小螺距刃片柵格排列的設計 |
(Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine-pitch ball grid array (FBGA) (IEC 60191-6-5:2001); German versio |
| DIN EN 60191-6-6-2002 |
半導體器件的機械標準化.第6-6部分:平面安裝的半導體器件外殼外形圖繪制的一般規則.小螺距刃片柵格排列的設 |
(Mechanical standardization of semiconductor devices - Part 6-6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine pitch land grid array (FLGA) (IEC 60191-6-6:2001); German versio |
| DIN EN 60191-6-8-2002 |
半導體器件的機械標準化.第6-8部分:準備表面安裝的半導體器件包裝件外形圖的一般規則.玻璃-陶瓷方形扁平封 |
(Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for glass sealed ceramic quad flatpack (G-QFP) (IEC 60191-6-8:2001); Germ |
| DIN EN 60192-2002 |
低壓鈉蒸氣燈.性能規范 |
(Low-pressure sodium vapour lamps - Performance specifications (IEC 60192:2001); German version EN 60192:2001) |
| DIN EN 602-1995 |
鋁和鋁合金.鍛件.與食品接觸的產品制造用半成品的化學成分 |
(Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food; German version EN 602:1994) |
| DIN EN 602-2004 |
鋁和鋁合金.鍛件.與食品接觸的物品制造用半成品的化學成分 |
|
| DIN EN 60204-1-1998 |
機械設備的安全性.機械設備中的電氣裝置.第1部分:一般要求 |
(Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:1997 + Corrigendum 1998); German version EN 60204-1:1997) |
| DIN EN 60204-11-2001 |
機械安全.機械電氣設備.第11部分:大于1000Va.c.或1500V.d.c不超過36KV的高壓設備的要求 |
(Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11:2000); German version EN 60204-11:2000) |
| DIN EN 60204-31 Berichtigung 1-2001 |
對DINEN60204-31(VDE0113Teil31):1999-06的勘誤 |
(Corrigendum to DIN EN 60204-31 (VDE 0113 Teil 31):1999-06) |
| DIN EN 60204-31-1999 |
機器的安全性.機器上的電器裝置.第31部分:縫紉機、縫紉組件和縫紉設備特殊安全和EMC要求 |
(Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems (IEC 60204-31:1996, modified); German version EN 60204-31:1998) |
| DIN EN 60204-32-1999 |
機械安全.機器上的電器設備.第32部分:起重裝置的要求 |
(Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:1998); German version EN 60204-32:1998) |
| DIN EN 60205-2001 |
磁性零件有效參數的計算 |
(Calculation of the effective parameters of magnetic piece parts (IEC 60205:2001); German version EN 60205:2001) |
| DIN EN 60214-1998 |
有載分接開關 |
(On-load tap-changers (IEC 60214:1989, modified); German version EN 60214:1997) |
| DIN EN 60215-1993 |
對無線電發射設備的安全要求 |
Safety requirements for radio transmitting equipment (IEC 60215:1987 + A1:1990); German version EN 60215:1989 + A1:1992 |
| DIN EN 60215/A2-1995 |
對無線電發射設備的安全要求 |
(Safety requirements for radio transmitting equipment (IEC 62152/A:1993); German version EN 60215/A2:1994) |
| DIN EN 60216-1-2002 |
電絕緣材料的耐熱性能.第1部分:老化過程和試驗結果評定 |
(Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluating of test results (IEC 60216-1:2001); German version EN 60216-1:2001) |
| DIN EN 60216-3-2-1997 |
電絕緣材料耐熱性能的測定導則.第3部分:計算熱耐久特性值的規則.第2節:不包括和包括停機期間介質(同樣的檢 |
(Guide for the determination of thermal endurance properties of electrical insulating materials - Part 3: Instructions for calculating thermal endurance characteristics - Section 2: Calculations for incomplete data: proof test results up to and including |
| DIN EN 60216-3-2002 |
電絕緣材料的耐熱性能.第3部分:耐熱特性值計算指南 |
(Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2002); German version EN 60216-3:2002) |
| DIN EN 60216-4-2-2001 |
電絕緣材料.耐熱性能.第4-2部分:老化爐.不超過300℃的精密烘爐 |
(Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 鳦 (IEC 60216-4-2:2000); German version EN 60216-4-2:2000) |
| DIN EN 60216-4-3-2001 |
電絕緣材料.耐熱性能.第4-3部分:老化爐.多室老化爐 |
(Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens; Multi-chamber ovens (IEC 60216-4-3:2000); German version EN 60216-4-3:2000) |
| DIN EN 60216-5-2003 |
電絕緣材料.耐熱特性.第5部分:絕緣材料相對耐熱指數(RTE)的測定 |
(Electric insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material(IEC 60216-5:2003); German version EN 60216-5:2003) |
| DIN EN 60216-6-2004 |
電絕緣材料.耐熱性能.第6部分:用固定時間框架法測定絕緣材料的耐熱指數(TI和RTE) |
|
| DIN EN 60230-2003 |
電纜及其附件的脈沖電壓試驗 |
(Impulse tests on cables and their accessories (IEC 60230:1966); German version EN 60230:2002) |
| DIN EN 60238 Berichtigung 1-2003 |
DINEN60238-2003的技術勘誤1 |
(Corrigendum to DIN EN 60238 (VDE 0616 Part 1):2003-05 (CENELEC-Corrigendum to EN 60238:1998/A2:2002)) |
| DIN EN 60238-2003 |
愛迪森螺紋燈座 |
(Edison screw lampholders (IEC 60238:1998 + A1:1999 + A2:2002); German version EN 60238:1998 + Corrigendum February 1999 + A1:1999 + A2:2002) |
| DIN EN 60239-1997 |
電弧爐用的帶螺紋座和連接銷的圓柱形機加工石墨電極的公稱尺寸 |
(Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces (IEC 60239:1997); German version EN 60239:1997) |
| DIN EN 60240-1-1995 |
工業加熱用電紅外發射器的特性.第1部分:短波紅外發射器 |
(Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters (IEC 60240-1:1992); German version EN 60240-1:1994) |
| DIN EN 60243-1-1999 |
絕緣材料的電氣擊穿強度.檢驗方法.第1部分:工業頻率檢驗 |
(Electrical strength of insulating materials - Test methods - Part 1: Test at power frequencies (IEC 60243-1:1998); German version EN 60243-1:1998) |
| DIN EN 60243-2-2001 |
固體絕緣材料介電強度的試驗方法.第2部分:用直流電壓測試的補充要求 |
(Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001); German version EN 60243-2:2001) |
| DIN EN 60243-3-1996 |
固體絕緣材料的介電強度試驗方法.第3部分:沖擊電壓試驗的補充規定 |
(Methods of test for electric strength of solid insulating materials - Part 3: Additional requirements for impulse tests (IEC 60243-3:1993); German version EN 60243-3:1994) |
| DIN EN 60244-1-2000 |
無線電發射機的測量方法.第1部分:廣播發射機的總特征 |
(Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters (IEC 60244-1:1999); German version EN 60244-1:2000) |
| DIN EN 60244-10-1994 |
無線電發射機的測量方法.第10部分:采用插入測試信號的電視發射機和差轉機的測量方法 |
(Methods of measurement for radio transmitters - Part 10: Methods of measurement for television transmitters and transposers employing insertion test signals (IEC 60244-10:1986); German version EN 60244-10:1993) |
| DIN EN 60244-11-1994 |
無線電發射機的測量方法.第11部分:無線電差轉機的測量方法 |
(Methods of measurement for radio transmitters - Part 11: Transposers for FM sound broadcasting (IEC 60244-11:1989); German version EN 60244-11:1993) |
| DIN EN 60244-12-1-1994 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.規定特性 |
(Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; characteristics to be specified (IEC 60244-12-1:1989); German version EN 60244- |
| DIN EN 60244-12-2-1994 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.說明卡 |
(Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; specification sheet (IEC 60244-12-2:1989); German version EN 60244-12-2:1993) |
| DIN EN 60244-13-1993 |
無線電源發射機的測量方法.第13部分:調頻聲廣播的傳送性能 |
(Methods of measurement for radio transmitters; part 13: performance characteristics for FM sound broadcasting (IEC 60244-13:1991); German version EN 60244-13:1993) |
| DIN EN 60244-14-1998 |
無線電發射機的測量方法.第14部分:由于使用同樣的或相近的天線的兩個或多個發射機而造成的外部相互調制的分 |
(Methods of measurement for radio transmitters - Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas (IEC 60244-14:1997); German version EN 60244-14:1997) |
| DIN EN 60244-15-2000 |
無線電發射機的測量方法.第15部分:聲音廣播用的調幅調制發射機 |
(Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting (IEC 60244-15:1999); German version EN 60244-15:2000) |
| DIN EN 60244-5-1994 |
無線電發射機的測量方法.第5部分:電視發射機的特性 |
(Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters (IEC 60244-5:1992); German version EN 60244-5:1994) |
| DIN EN 60244-8-1994 |
無線電發射機的測量方法.第8部分:檢驗電視發射機和換位器用的殘留邊帶解調器的特性 |
(Methods of measurement for radio transmitters - Part 8: Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers (IEC 60244-8:1993); German version EN 60244-8:1994) |
| DIN EN 60244-9-1994 |
無線電發射機的測量方法.第9部分:電視換位器的傳輸特性 |
(Methods of measurement for radio transmitters - Part 9: Performance characteristics for television transposers (IEC 60244-9:1993); German version EN 60244-9:1994) |
| DIN EN 60247-2005 |
絕緣液體.相對電容率、電介質損耗因數(tanδ)和直流電阻率的測量 |
|
| DIN EN 60249-1-1994 |
印制電路用基材.第1部分:試驗方法 |
(Base materials for printed circuits; part 1: test methods (IEC 60249-1:1982 + A4:1993); German version EN 60249-1:1993 + A4:1994) |
| DIN EN 60249-2-1-2000 |
印制電路用基材.第2部分:規范.第1號規范:高電氣質量的酚醛纖維素紙覆銅層壓板 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German version EN 60249-2-1:199 |
| DIN EN 60249-2-10-2001 |
印制電路用基材.第2部分:規范.第10號規范:確定了燃燒性的環氧非織物玻璃增強銅涂覆層片 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 10: Epoxide non woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-10:1987 + A1:1989 + A2:1990 + A3:1993 + |
| DIN EN 60249-2-11-2001 |
印制電路用基材.第2部分:規范.第11號規范:一般用途級的多層印制板生產用的薄環氧織物玻璃纖維銅涂覆層片. |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 11: Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards (IEC 60249-2-11:1987 + A1:1989 |
| DIN EN 60249-2-12-2001 |
印制電路用基材.第2部分:規范.第12號規范:多層印制板生產用的確定了燃燒性的薄環氧織物玻璃纖維銅涂覆層片. |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 12: Thin epoxide woven glass fabric copper-clad laminated sheet, of defined flammabilty, for use in the fabrication of multilayer printed boards (IEC 60249-2-12:1987 + A1:198 |
| DIN EN 60249-2-13-1994 |
印制電路用基材.第2部分:規范.第13號規范:通用級軟覆銅聚酰亞胺薄膜,通用級 |
(Base materials for printed circuits - Part 2: Specifications; specification No. 13: Flexible copper-clad polyimide film, general purpose grade (IEC 60249-2-13:1987 + A1:1993); German version EN 60249-2-13:1994 + A1:1994) |
| DIN EN 60249-2-14-2001 |
印制電路用基材.第2部分:規范.第12號規范:經濟質量的確定了燃燒性的酚酸纖維素銅涂覆層片. |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 14: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality (IEC 60249-2-14:1988 + A2:1990 + A3:1993 + A4:1994 |
| DIN EN 60249-2-15-1994 |
印制電路用基材.第2部分:規范.第15號規范:規定易燃性的軟覆銅聚酰亞胺薄膜,規定的易燃性 |
(Base materials for printed circuits - Part 2: Specifications; specification No. 15: Flexible copper-clad polyimide film, of defined flammability (IEC 60249-2-15:1987 + A1:1993); German version EN 60249-2-15:1994 + A1:1994) |
| DIN EN 60249-2-16-2001 |
印制電路用基材.第2部分:規范.第16號規范:確定了燃燒性的聚酰胺織物纖維銅涂覆層片的經濟質量 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 16: Polyamide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test), economic quality (IEC 60249-2-16:1992 + A1:1993 + A2:1994 + A3:2 |
| DIN EN 60249-2-17-2001 |
印制電路用基材.第2部分:規范.第17號規范:用于多層印制板生產的確定了燃燒性的薄聚酰胺玻璃纖維的銅覆蓋層 |
() |
| DIN EN 60249-2-18-2001 |
印制電路用基材.第2部分:規范.第18號規范.規定易燃性的帶雙馬來酰亞胺三嗪的銅涂覆改良性環氧化物層壓玻璃 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 18: Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-18:1992 + A1:1993 + A2: |
| DIN EN 60249-2-19-1993 |
印制電路用基材.第2部分:規范.第19號規范.多層印制板制作用規定易燃性的帶雙馬來酰亞胺三嗪的薄銅涂覆改良 |
(Base materials for printed circuits; part 2: specifications; specification No. 19: thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| DIN EN 60249-2-19/A1-1994 |
印制電路用基材.第2部分:規范.第19號規范.多層印制板制作用規定易燃性的覆銅雙馬來酰亞胺三嗪改性環氧玻璃 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 19: Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| DIN EN 60249-2-19/A2-1996 |
印制電路用基材.第2部分:規范.第19號規范.多層印制板制作用規定易燃性的帶雙馬來酰亞胺三嗪的薄銅涂覆改良 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 19: Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| DIN EN 60249-2-2-2000 |
印制電路用基材.第2部分:規范.第2號規范:經濟質量的酚醛纖維素紙覆銅層壓板 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985 + A1:1989 + A2:1990 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-2: |
| DIN EN 60249-2-3-2000 |
印制電路用基材.第2部分:規范.第3號規范:規定易燃性的環氧化合物纖維素紙覆銅層壓板(垂直燃燒試驗) |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-3:1987 + A1:1989 + A2:1993 + Corrig.:1994 + A3:1994 + A4:2 |
| DIN EN 60249-2-4-2000 |
印制電路用基材.第2部分:規范.第4號規范:普通級的環氧化合物編織的玻璃纖維覆銅層壓板 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000); German version EN 602 |
| DIN EN 60249-2-5-2001 |
印制電路用基材.第1部分:試驗方法.5號規范.有特定燃燒性的環氧織物玻璃纖維銅包覆層片 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-5:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:200 |
| DIN EN 60249-2-6-2001 |
印制電路用基材.第2部分:規范.6號規范.有特定燃燒性的酚酸纖維素紙銅包覆層片 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 6: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test) (IEC 60249-2-6:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German |
| DIN EN 60249-2-7-2001 |
印制電路用基材.第2部分:規范.7號規范.有特定燃燒性的酚酸纖維素紙銅包覆層片 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 7: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-7:1987 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German v |
| DIN EN 60249-2-8-1994 |
印制電路用基材.第2部分:規范.第8號規范:軟覆銅聚酯(PETP)薄膜 |
(Base materials for printed circuits - Part 2: Specifications; specification No. 8: Flexible copper-clad polyester (PETP) film (IEC 60249-2-8:1987 + A1:1993); German version EN 60249-2-8:1994 + A1:1994) |
| DIN EN 60249-2-9-2001 |
印制電路用基材.第2部分:規范.第9號規范:確定了燃燒性的環氧纖維素紙芯.環氧玻璃表面銅玻璃層片 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 9: Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-9:1987 + A1:1987 + A2:1 |
| DIN EN 60252-1-2002 |
交流電動機的電容器.第1部分:總則.性能、試驗和額定值.安全要求.安裝和操作指南 |
(AC motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation (IEC 60252-1:2001); German version EN 60252-1:2001) |
| DIN EN 60252-2-2004 |
交流電動機電容器.第2部分:電動機起動電容器 |
(AC motor capacitors - Part 2: Motor start capacitors (IEC 60252-2:2003); German version EN 60252-2:2003) |
| DIN EN 60252-2-2004 |
交流電動機電容器.第2部分:電動機起動電容器 |
|
| DIN EN 60254-1-1998 |
鉛酸牽引蓄電池.第1部分:一般要求和試驗方法 |
(Lead-acid traction batteries - Part 1: General requirements and methods of test (IEC 60254-1:1997); German version EN 60254-1:1997) |
| DIN EN 60254-2-2001 |
牽引用鉛酸蓄電池.第2部分:電池和端極的尺寸以及電池上極性的標識 |
(Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:1997 + A1:2000); German version EN 60254-2:1997 + A1:2000) |
| DIN EN 60255-21-1-1996 |
繼電器.第21部分:量值繼電器和保護設備上振動,沖擊,碰撞和地震試驗.第1節:振動試驗(正弦波) |
(Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 1: Vibration tests (sinusoidal) (IEC 60255-21-1:1988); German version EN 60255-21-1:1995) |
| DIN EN 60255-21-2-1996 |
繼電器.第21部分:量值繼電器和保護設備上振動,沖擊,碰撞和地震試驗.第2節:沖擊和碰撞試驗 |
(Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 2: Shock and bump tests (IEC 60255-21-2:1988); German version EN 60255-21-2:1995) |
| DIN EN 60255-21-3-1995 |
繼電器.第21部分:測量繼電器和保護設備時的振動,沖擊,撞擊和地震試驗.第3節:地震試驗 |
(Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: Seismic tests (IEC 60255-21-3:1993); German version EN 60255-21-3:1995) |
| DIN EN 60255-22-2 Berichtigung 1-1998 |
對DINEN60255-22-2(VDE0435第3022部分)的校正 |
(Corrigendum to DIN EN 60255-22-2 (VDE 0435 Teil 3022):1997-05) |
| DIN EN 60255-22-2-1997 |
繼電器.第22部分:測量繼電器和保護設備的電干擾強度試驗.第2節:靜電放射試驗 |
(Electrical relays - Part 22: Electrical disturbance tests for measuring relays and protection equipment; section 2: Electrostatic discharge tests (IEC 60255-22-2:1996); German version EN 60255-22-2:1996) |
| DIN EN 60255-22-3-2001 |
繼電器,第22-3部分:測量繼電器和保護設備的配電試驗.輻射電磁場的配電試驗 |
(Electrical relays - Part 22-3: Electrical disturbance tests for measuring relays and protection equipment; Radiated electromagnetic field disturbance tests (IEC 60255-22-3:2000); German version EN 60255-22-3:2000) |
| DIN EN 60255-22-4-2003 |
電氣繼電器.第22-4部分:量度繼電器和保護裝置的電氣騷擾試驗.快速瞬變騷擾試驗 |
(Electrical relays - Part 22-4: Electrical disturbance tests for measuring relays and protection equipment; Electrical fast transient/burst immunity test (IEC 60255-22-4:2002); German version EN 60255-22-4:2002) |
| DIN EN 60255-22-5-2003 |
電氣繼電器.第22-5部分:量度繼電器和保護裝置的電氣騷擾試驗.電涌干擾試驗 |
(Electrical relays - Part 22-5: Electrical disturbance tests for measuring relays and protection equipment; Surge immunity test (IEC 60255-22-5:2002); German version EN 60255-22-5:2002) |
| DIN EN 60255-22-6-2002 |
繼電器.第22-6部分:測量繼電器和防護設備的電干擾試驗.抗射頻場引起的電干擾性 |
(Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment; Immunity to conducted disturbances induced by radio frequency fields (IEC 60255-22-6:2001); German version EN 60255-22-6:2001) |
| DIN EN 60255-22-7-2004 |
電氣繼電器.第22-7部分:量度繼電器和保護裝置的電氣干擾試驗.工頻抗擾試驗 |
(Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests (IEC 60255-22-7:2003); German version EN 60255-22-7:2003) |
| DIN EN 60255-22-7-2004 |
電氣繼電器.第22-7部分:量度繼電器和保護裝置的電氣干擾試驗.工頻抗擾試驗 |
|
| DIN EN 60255-23-1997 |
繼電器.第23部分:觸點性能 |
(Electrical relays - Part 23: Contact performance (IEC 60255-23:1994); German version EN 60255-23:1996) |
| DIN EN 60255-24-2002 |
電氣繼電器.第24部分:電力系統用瞬時數據交換通用格式 |
(Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems (IEC 60255-24:2001); German version EN 60255-24:2001) |
| DIN EN 60255-25-2001 |
繼電器.第25部分:測量繼電器和保護裝置的電磁輻射試驗 |
(Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment (IEC 60255-25:2000); German version EN 60255-25:2000) |
| DIN EN 60255-3-1998 |
繼電器.第3部分:帶有輸入?yún)?shù)和相關的或非相關的時間特性曲線的測量繼電器 |
(Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time (IEC 60255-3:1989, modified); German version EN 60255-3:1998) |
| DIN EN 60255-5 Bb.1-2002 |
繼電器.第5部分:測量繼電器和保護設備的絕緣配合.要求和試驗.補充件1:標準的說明 |
(Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment; Requirements and tests; Supplement 1: Explication to the standard) |
| DIN EN 60255-5-2001 |
電氣繼電器.第5部分:測量繼電器和保護設備的絕緣配合.要求和試驗 |
(Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests (IEC 60255-5:2000); German version EN 60255-5:2001) |
| DIN EN 60255-6-1994 |
繼電器.第6部分:測量繼電器和保護裝置 |
(Electrical relays - Part 6: Measuring relays and protection equipment (IEC 60255-6:1988, modified); German version EN 60255-6:1994) |
| DIN EN 60255-8-1998 |
繼電器.第8部分:過載繼電器 |
(Electrical relays - Part 8: Thermal electrical relays (IEC 60255-8:1990, modified); German version EN 60255-8:1998) |
| DIN EN 60264-1-1995 |
繞組線的封裝.第1部分:圓繞組線單道和多道線筒的公稱尺寸及名稱 |
Packaging of winding wires - Part 1: Containers for round winding wires (IEC 60264-1:1968); German version EN 60264-1:1994 |
| DIN EN 60264-2-1-1995 |
繞組線的封裝.第2部分:帶圓柱芯的供線盤.第1節:尺寸 |
(Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools; section 1: Basic dimensions (IEC 60264-2-1:1989); German version EN 60264-2-1:1994) |
| DIN EN 60264-2-1-2004 |
繞組線的包裝.第2部分:圓柱形筒裝交貨線盤.基本尺寸 |
|
| DIN EN 60264-2-2-1995 |
繞組線的封裝.第2部分:帶圓柱芯的供線盤.第2節:由熱塑性材料制成的可多次使用的供線盤的規范 |
(Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools; section 2: Specification for returnable spools made from thermoplastic material (IEC 60264-2-2:1990); German version EN 60264-2-2:1994) |
| DIN EN 60264-2-2-2004 |
繞組線的封裝.第2-2部分:圓柱形筒裝交貨線盤.熱塑性材料制可回收線盤的規范 |
|
| DIN EN 60264-2-3-1995 |
繞組線的封裝.第2部分:帶圓柱芯供線盤.第3節:由熱塑性材料制成的單次使用的供線盤的規范 |
(Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools; section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-2-3:1990); German version EN 60264-2-3:1994) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com