標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 11885-1998 |
水質.通過感應耦合等離子原子發散分光光度計對33種素的測定 |
(Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy) |
| BS EN ISO 11897-2001 |
包裝.熱塑軟薄膜制袋.折邊處的撕裂擴展試驗 |
(Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds) |
| BS EN ISO 119-1978 |
塑料.苯酚-甲醛模塑.單體酚的測定.碘量法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method) |
| BS EN ISO 11904-1-2002 |
聲學.從接近耳朵聲源測定聲發射強度.利用人耳中麥克風技術 |
(Acoustics - Determination of sound immission from sound sources placed close to the ear - Technique using a microphone in a real ear (MIRE technique)) |
| BS EN ISO 11904-2-2004 |
聲學.測定近耳聲源的聲發射.利用人體模型的技術 |
|
| BS EN ISO 11905-1-1998 |
水質.氮的測定.用過氧焦硫酸鹽進行氧化溶解的方法 |
(Water quality - Determination of nitrogen - Method using oxidative digestion with peroxodisulfate) |
| BS EN ISO 11908-1996 |
漆和涂料用粘合劑.胺樹脂.一般試驗法 |
(Binders for paints and varnishes - Amino resins - General methods of test) |
| BS EN ISO 11909-1996 |
漆和涂料用粘合劑.聚異氰酸樹脂.一般試驗法 |
(Binders for paints and varnishes - Polyisocyanate resins - General methods of test) |
| BS EN ISO 11925-2-2002 |
著火試驗反應.受火焰直接熏烤的建筑產品的可燃性.單一火焰源試驗 |
(Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Single-flame source test) |
| BS EN ISO 11957-1997 |
聲學.客艙隔音功能的測定.實驗室和現場測量 |
(Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements) |
| BS EN ISO 11960-2001 |
石油和天然氣工業.油井套管和油管用鋼管 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) |
| BS EN ISO 11960-2005 |
石油和天然氣工業.油井套管或油管用鋼管 |
|
| BS EN ISO 11961-1997 |
石油和天然氣工業.鉆探管用鋼管.規范 |
(Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification) |
| BS EN ISO 11963-1996 |
塑料.聚碳酸酯薄板材的類型、尺寸和特性 |
(Plastics - Polycarbonate sheets - Types, dimensions and characteristics) |
| BS EN ISO 11969-1996 |
水質.砷的測定.原子吸收分光光度法(氫化技術) |
(Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)) |
| BS EN ISO 11978-2000 |
眼科光學.接觸鏡片和接觸鏡片護理產品.制造商提供的信息 |
(Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer) |
| BS EN ISO 11979-1-2000 |
眼科植入物.眼內晶狀體.詞匯 |
(Ophthalmic implants - Intraocular lenses - Vocabulary) |
| BS EN ISO 11979-2-2000 |
眼科植入物.眼內晶狀體.光學特性和試驗方法 |
(Ophthalmic implants - Intraocular lenses - Optical properties and test methods) |
| BS EN ISO 11979-4-2000 |
眼科植入物.眼內透鏡.貼標簽和信息 |
(Ophthalmic implants - Intraocular lenses - Labelling and information) |
| BS EN ISO 11980-1998 |
眼科光學.接觸鏡片和接觸鏡片護理產品.臨床檢測指南 |
(Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations) |
| BS EN ISO 11981-1999 |
眼科光學.接觸鏡片和接觸鏡片保護產品.接觸鏡片保護產品與接觸鏡片的物理兼容性的測定 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses) |
| BS EN ISO 11984-2000 |
眼科光學.接觸鏡片.剛性鏡片彎曲和斷裂強度的測定 |
(Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage) |
| BS EN ISO 11985-1998 |
眼科光學.接觸鏡片.暴露于紫外線和可見光輻射的老化(體外法) |
(Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method)) |
| BS EN ISO 11987-1998 |
眼科光學.接觸透鏡.儲藏壽命的測定 |
(Ophthalmic optics - Contact lenses - Determination of shelf-life) |
| BS EN ISO 11990-2003 |
光學和光學儀器.激光和激光相關設備.氣管柄激光抗性的測定 |
(Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts) |
| BS EN ISO 120-1978 |
塑料.苯酚-甲醛模塑.游離氨和銨化合物的測定.比色法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method) |
| BS EN ISO 12001-1997 |
聲學.機械設備產生的噪聲.噪聲試驗規程的介紹和起草規則 |
(Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code) |
| BS EN ISO 12005-2003 |
激光和激光相關設備.激光束參數的試驗方法.偏振 |
|
| BS EN ISO 12005-2003 |
激光和激光相關設備.激光束參數的試驗方法.偏振 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization) |
| BS EN ISO 12017-1996 |
塑料.聚甲基丙烯酸甲酯雙合板和三合板的試驗方法 |
(Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods) |
| BS EN ISO 12020-2000 |
水的質量.鋁的測定.原子吸收分光光度測定法 |
(Water quality - Determination of aluminium - Atomic absorption spectrometric methods) |
| BS EN ISO 12048-2001 |
包裝.完全滿運輸包裝件.用壓縮試驗機進行壓縮試驗和堆積試驗 |
(Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester) |
| BS EN ISO 12058-1-1997 |
塑料.使用落球粘度計測定粘度.斜管法 |
(Plastics - Determination of viscosity using a falling-ball viscometer - Inclined-tube method) |
| BS EN ISO 1207-1993 |
一字槽圓柱頭螺釘.A級產品 |
(Slotted cheese head screws - Product grade A) |
| BS EN ISO 12085-1997 |
幾何制品規范(GPS).表面特征.輪廓法.主要參數 |
(Geometric Product Specification (GPS) - Surface texture - Profile method - Motif parameters) |
| BS EN ISO 12100-1-2003 |
機械安全.設計基本概念和一般原理.基本術語和方法 |
(Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology) |
| BS EN ISO 12100-2-2003 |
機械安全.設計基本概念和一般原理.技術原理 |
(Safety of machinery - Basic concepts, general principles for design - Technical principles) |
| BS EN ISO 1211-2001 |
牛奶.脂肪含量的測定.重量分析法(參照法) |
(Milk - Determination of fat content - Gravimetric method (Reference method)) |
| BS EN ISO 12114-1997 |
纖維增強塑料.熱固性模塑化合物和聚酯膠片.固化特性的測定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics) |
| BS EN ISO 12115-1997 |
纖維增強塑料.熱固性模塑化合物和聚酯膠片.流動能力和儲存期限的測定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life) |
| BS EN ISO 12138-1997 |
紡織材料.紡織纖維作易燃性試驗前的家用洗滌方法 |
(Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing) |
| BS EN ISO 12156-1-2000 |
柴油.高頻往復設備(HFRR)用潤滑劑性能評定.試驗方法. |
(Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Test method) |
| BS EN ISO 12162-1996 |
壓力管道和配件用熱塑性塑料.分類和設計.總體設備的設計系數 |
(Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient) |
| BS EN ISO 12163-2000 |
牙科基盤/制模蠟 |
(Dental baseplate/modelling wax) |
| BS EN ISO 12179-2001 |
幾何產品規范(GPS).表面質地:段面法.接觸式(針式)儀器的校準 |
(Geometrical product specifications (GPS) - Surface texture - Profile method - Calibration of contact (stylus) instruments) |
| BS EN ISO 12185-1996 |
原油和石油產品.密度測定.振蕩U形管法 |
(Methods of test for petroleum and its products - Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method) |
| BS EN ISO 12193-2004 |
動植物脂肪和油.用直接石墨爐原子吸收光譜法測定鉛含量 |
|
| BS EN ISO 12205-1996 |
石油及其產品.石油產品.柴油燃料氧化穩定性的測定 |
(Methods of test for petroleum and its products - Petroleum products - Determination of the oxidation stability of middle-distillate fuels) |
| BS EN ISO 12209-1-2001 |
氣瓶.壓縮的可呼吸氣體用氣瓶閥的外部連接.叉形連接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Yoke type connections) |
| BS EN ISO 12209-2-2001 |
氣瓶.壓縮的可呼吸氣體用氣瓶閥的外部連接.螺紋連接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Threaded connections) |
| BS EN ISO 12209-3-2001 |
氣瓶.壓縮的可呼吸氣體用氣瓶閥的外部連接.230巴閥門連接適配器 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Adaptor for 230 bar valves) |
| BS EN ISO 12215-1-2000 |
小艇.船體構造和船材尺寸.材料.玻璃纖維增強熱固性樹脂標準疊層板材 |
(Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate) |
| BS EN ISO 12215-2-2002 |
小艇.船體構造和船材尺寸.材料.夾層結構芯材料.嵌入材料 |
(Small craft - Hull construction and scantlings - Materials - Core materials for sandwich construction, embedded materials) |
| BS EN ISO 12215-3-2002 |
小艇.船體構造和船材尺寸.材料.鋼、鋁合金及其它材料 |
(Small craft - Hull construction and scantlings - Materials - Steel, aluminium alloys, wood, other materials) |
| BS EN ISO 12215-4-2002 |
小艇.船體構造和船材尺寸.車間和生產 |
(Small craft - Hull construction and scantlings - Workshop and manufacturing) |
| BS EN ISO 12216-2002 |
小船.窗口,舷窗,艙口,舷窗蓋和門的強度和不透水性要求 |
(Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements) |
| BS EN ISO 12217-1-2002 |
小型船舶.穩定性和浮力評估和分類.船體大于或等于6米的無帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Non-sailing boats of hull length greater than or equal to 6 m) |
| BS EN ISO 12217-2-2002 |
小型船舶.穩定性和浮力評估和分類.船體大于或等于6米的帶帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Sailing boats of hull length greater than or equal to 6 m) |
| BS EN ISO 12217-3-2002 |
小艇.穩定性和浮力評估和分類.船體長度小于6米的小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Boats of hull length less than 6 m) |
| BS EN ISO 12224-1-1998 |
焊絲、固體熔劑和助焊劑.規范和試驗方法.分類和性能要求 |
(Solder wire, solid and flux cored - Specification and test methods - Classification and performance requirements) |
| BS EN ISO 12224-2-1999 |
助熔填充焊絲和實芯焊條.規范和試驗方法.助熔劑含量的測定 |
(Solder wire, solid and flux cored - Specification and test methods - Determination of flux content) |
| BS EN ISO 12224-3-2003 |
實心和管狀釬料焊絲.規范和試驗方法.管狀釬料焊絲效能的潤濕平衡法 |
(Solder wire, solid and flux cored - Specification and test methods - Wetting balance test method for flux core solder wire efficacy) |
| BS EN ISO 12228-1999 |
動物和植物脂肪和油脂.分和總甾醇含量的測定.氣相色譜法 |
(Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method) |
| BS EN ISO 12236-1996 |
土工織物及有關土工織物制品.靜態戳孔試驗(CBR 試驗) |
(Geotextiles and geotextile-related products - Static puncture test (CBR-Test)) |
| BS EN ISO 12241-1998 |
建筑設備和工業裝置的熱絕緣.計算規則 |
(Thermal insulation for building equipment and industrial installations - Calculation rules) |
| BS EN ISO 1234-1998 |
開口銷 |
(Split pins) |
| BS EN ISO 12543-1-1998 |
建筑物用玻璃.夾層玻璃和夾層安全玻璃.定義和零部件的描述 |
(Glass in building - Laminated glass and laminated safety glass - Definitions and description of component parts) |
| BS EN ISO 12543-3-1998 |
建筑物用玻璃.夾層玻璃和夾層安全玻璃.夾層玻璃 |
(Glass in building - Laminated glass and laminated safety glass - Laminated glass) |
| BS EN ISO 12543-4-1998 |
建筑物用玻璃.夾層玻璃和夾層安全玻璃.耐久性試驗方法 |
(Glass in building - Laminated glass and laminated safety glass - Test methods for durability) |
| BS EN ISO 12543-5-1998 |
建筑物用玻璃.夾層玻璃和夾層安全玻璃.尺寸和邊緣整理 |
(Glass in building - Laminated glass and laminated safety glass - Dimensions and edge finishing) |
| BS EN ISO 12543-6-1998 |
建筑物用玻璃.夾層玻璃和夾層安全玻璃.外觀 |
(Glass in building - Laminated glass and laminated safety glass - Appearance) |
| BS EN ISO 12567-1-2000 |
門窗的熱性能.加熱箱法測定熱傳遞系數.完整的門窗 |
(Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Complete windows and doors) |
| BS EN ISO 12569-2001 |
建筑物的隔熱性.建筑物中空氣變化的測定.示蹤氣體稀釋法 |
(Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method) |
| BS EN ISO 12570-2000 |
建筑材料和產品熱液性能.用高溫干燥法測定潮氣的含量 |
(Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature) |
| BS EN ISO 12571-2000 |
建筑材料和產品熱液性能.吸濕特性的測定 |
(Hygrothermal performance of building materials and products - Determination of hygroscopic properties) |
| BS EN ISO 12572-2001 |
建筑材料和產品的冷熱性能.水蒸氣傳輸性能的測定 |
(Hygrothermal performance of building materials and products - Determination of water vapour transmission properties) |
| BS EN ISO 12625-1-2005 |
薄紙和薄紙制品.術語的一般指南 |
|
| BS EN ISO 12625-3-2005 |
薄紙和薄紙制品.厚度、膨脹厚度和表觀體密度的測定 |
|
| BS EN ISO 12625-6-2005 |
薄紙和薄紙制品.克數測定 |
|
| BS EN ISO 12625-9-2005 |
薄紙和薄紙制品.鋼球式頂破強力的測定 |
|
| BS EN ISO 1264-1997 |
塑料.氯乙烯的均聚物和共聚物樹脂.水萃物的pH值測定 |
(Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract) |
| BS EN ISO 1265-1997 |
塑料.聚氯乙烯樹脂.雜質和外來雜質數的測定 |
(Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles) |
| BS EN ISO 12677-2003 |
用XRF對耐火制品進行化學分析.熔鑄珠法 |
(Chemical analysis of refractory products by XRF - Fused cast bead method) |
| BS EN ISO 12683-2004 |
機械鍍鋅涂層.規范和試驗方法 |
|
| BS EN ISO 12687-1998 |
金屬覆層.孔隙率試驗.濕硫(硫華)試驗 |
(Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test) |
| BS EN ISO 12706-2001 |
無損檢驗.術語.滲透檢驗用術語 |
(Non-destructive testing - Terminology - Terms used in penetrant testing) |
| BS EN ISO 12737-1999 |
金屬材料.平面變形斷裂韌性的測定 |
(Metallic materials - Determination of plane-strain fracture toughness) |
| BS EN ISO 12777-1-1995 |
托盤連接件的檢驗方法.托盤用釘子、其它榫釘型緊固件和U形釘?shù)目箯澢臏y定 |
(Methods of test for pallet joints - Determination of bending resistance of pallet nails, other dowel-type fasteners and staples) |
| BS EN ISO 12777-2-2000 |
托盤連接件的檢驗方法.托盤用釘子耐拉伸性的測定 |
(Methods of test for pallet joints - Determination of withdrawal and head pull-through resistance of pallet nails and staples) |
| BS EN ISO 12777-3-2002 |
托盤連接件的試驗方法.托盤連接件強度的測定 |
(Methods of test for pallet joints - Determination of strength of pallet joints) |
| BS EN ISO 128-20-2000 |
技術圖紙.表示的一般原則.直線的基本規定 |
(Technical drawings - General principles of presentation - Basic conventions for lines) |
| BS EN ISO 128-21-2000 |
技術圖紙.表示的一般原則.用計算機輔助設計(CAD)系統對直線的制備 |
(Technical drawings - General principles of presentation - Preparation of lines by CAD systems) |
| BS EN ISO 12864-1998 |
眼科光學.接觸鏡片.散光測定 |
(Ophthalmic optics - Contact lenses - Determination of scattered light) |
| BS EN ISO 12865-1998 |
眼科儀器.檢眼鏡 |
(Ophthalmic instruments - Retinoscopes) |
| BS EN ISO 12866-1999 |
眼科設備.視野鏡 |
(Ophthalmic instruments - Perimeters) |
| BS EN ISO 12867-1998 |
眼科儀器.試驗框架 |
(Ophthalmic instruments - Trial frames) |
| BS EN ISO 12870-1998 |
眼科光學.鏡框.一般要求和試驗方法 |
(Ophthalmic optics - Spectacle frames - General requirements and test methods) |
| BS EN ISO 12870-2004 |
眼科光學.鏡框.要求和試驗方法 |
|
| BS EN ISO 12894-2001 |
熱環境人類工效學.暴露于極熱或冷環境中的個人的醫學檢驗 |
(Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments) |
| BS EN ISO 12922-1999 |
潤滑油、工業油及有關產品(L級).H系列(液壓系統).HFAE、HFAS、HFB、HFC、HFDR和HFDU類別規范 |
(Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU) |
| BS EN ISO 12937-2001 |
石油及其產品的試驗方法.BS 2000-438:石油產品.水含量測定.庫侖卡耳費歇爾滴定法 |
(Methods of test for petroleum and its products - BS 2000-438:Petroleum products - Determination of content - Coulometric Karl Fischer titration method) |
| BS EN ISO 12944-1-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.一般說明 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - General introduction) |
| BS EN ISO 12944-2-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.環境的分類 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Classification of environments) |
| BS EN ISO 12944-3-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.設計條件 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Design considerations) |
| BS EN ISO 12944-4-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.表面類型和表面制備 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Types of surface and surface preparation) |
| BS EN ISO 12944-5-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.防護涂層系統 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Protective paint systems) |
| BS EN ISO 12944-6-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.實驗室性能試驗方法 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods) |
| BS EN ISO 12944-7-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.油漆作業的執行和管理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Execution and supervision of paintwork |
| BS EN ISO 12944-8-1998 |
涂料和清漆.防護涂層系統對鋼結構的腐蝕防護.新工作及維修工作規范的書寫 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Development of specifications for new work and maintenance) |
| BS EN ISO 12945-1-2001 |
紡織品.測定織物表面起毛和起球的傾向.起球箱法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Pilling box method) |
| BS EN ISO 12945-2-2000 |
紡織材料.織物表面起毛起球傾向性的測定.改進的馬丁代爾(Martindale)法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Modified Martindale method) |
| BS EN ISO 12947-1-1999 |
織物.Martindale法對纖維磨損抗性的測定.Martindale磨損試驗裝置 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus) |
| BS EN ISO 12947-2-1999 |
織物.Martindale法對纖維磨損抗性的測定.破損樣品的測定 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of specimen breakdown) |
| BS EN ISO 12947-3-1999 |
質量損失測定 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of mass loss) |
| BS EN ISO 12947-4-1999 |
織物.Martindale法對纖維磨損抗性的測定.表面變化的評估 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Assessment of appearance change) |
| BS EN ISO 12952-1-1999 |
織物.床上用品的燃燒性能.由隱燃香煙引起的可燃性的一般試驗方法 |
(Textiles - Burning behaviour of bedding items - General test methods for the ignitability by a smouldering cigarette) |
| BS EN ISO 12952-2-1999 |
織物.床上用品的燃燒性能.由隱燃香煙引起的可燃性的特殊試驗方法 |
(Textiles - Burning behaviour of bedding items - Specific test methods for the ignitability by a smouldering cigarette) |
| BS EN ISO 12952-3-1999 |
織物.床上用品的燃燒性能.由一小團明火引起的可燃性的一般試驗方法 |
(Textiles - Burning behaviour of bedding items - General test methods for the ignitability by a small open flame) |
| BS EN ISO 12952-4-1999 |
織物.床上用品的燃燒性能.由一小團明火引起的可燃性的特殊試驗方法 |
(Textiles - Burning behaviour of bedding items - Specific test methods for the ignitability by a small open flame) |
| BS EN ISO 12956-1999 |
土工織物及其相關產品.特性化開口尺寸的測定 |
(Geotextiles and geotextile-related products - Determination of the characteristic opening size) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com