標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 12870-1998 |
眼鏡科學.眼鏡框.一般要求和試驗方法 |
(Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997); German version EN ISO 12870:1997) |
| DIN EN ISO 12870-2004 |
眼科光學.眼鏡架.要求和試驗方法 |
|
| DIN EN ISO 12894-2002 |
熱環境人類工效學.暴露于極熱和冷環境中的人的醫學監驗 |
(Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001); German version EN ISO 12894:2001) |
| DIN EN ISO 12922-2002 |
潤滑劑、工業用油和相關產品(L級).H類(液壓體系).目錄HFAE、HFAS、HFB、HFC、HFDR和HFDU的規范 |
(Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002) |
| DIN EN ISO 12937-2002 |
石油產品.水含量測定.庫侖卡耳.費歇爾滴定法 |
(Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000); German version EN ISO 12937:2000) |
| DIN EN ISO 12944-1-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第1部分:一般性介紹 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998); German version EN ISO 12944-1:1998) |
| DIN EN ISO 12944-2-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第2部分:環境分類 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998); German version EN ISO 12944-2:1998) |
| DIN EN ISO 12944-3-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第3部分:設計的基本原理 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998); German version EN ISO 12944-3:1998) |
| DIN EN ISO 12944-5-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第5部分:涂層系統 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998); German version EN ISO 12944-5:1998) |
| DIN EN ISO 12944-6-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第6部分:評定涂層系統的實驗室試驗 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test (ISO 12944-6:1998); German version EN ISO 12944-6:1998) |
| DIN EN ISO 12944-7-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第7部分:涂層工作的實施和監督 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998); German version EN ISO 12944-7:1998) |
| DIN EN ISO 12944-8-1998 |
涂料和清漆.用涂層系統對鋼結構防腐蝕.第8部分:新工作和維修用規范的開發 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998); German version EN ISO 12944-8:1998) |
| DIN EN ISO 12945-1-2001 |
紡織品.測定織物表面起毛和起球的傾向.第1部分:起球箱法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000); German version EN ISO 12945-1:2000) |
| DIN EN ISO 12945-2-2000 |
織物.以表面起毛起球試驗測定織物孔隙度.第2部分:改進的馬丁代爾法 |
(Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000); German version EN ISO 12945-2:2000) |
| DIN EN ISO 12947-1-1999 |
織物.用馬丁代爾法測定織物平面結構的耐磨性.第1部分:馬丁代爾磨損試驗機 |
(Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998); Version allemande EN ISO 12947-1:1998) |
| DIN EN ISO 12947-2-1999 |
織物.用馬丁代爾法測定織物平面結構的耐磨性.第2部分:試樣損壞測定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998); German version EN ISO 12947-2:1998) |
| DIN EN ISO 12947-3-1999 |
織物.用馬丁代爾法測定織物平面結構的耐磨性.第3部分:質量損失測定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998); German version EN ISO 12947-3:1998) |
| DIN EN ISO 12947-4-1999 |
織物.用馬丁代爾法測定織物平面結構的耐磨性.第4部分:表面變化的評定 |
(Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998); German version EN ISO 12947-4:1998) |
| DIN EN ISO 12952-1-1999 |
紡織物.床單的燃燒性能.第1部分:用一只點燃的香煙檢驗易燃性的一般試驗方法 |
(Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998); German version EN ISO 12952-1:1998) |
| DIN EN ISO 12952-2-1999 |
紡織物.床單的燃燒性能.第2部分:用一只點燃的香煙檢驗易燃性的特殊試驗方法 |
(Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998); German version EN ISO 12952-2:1998) |
| DIN EN ISO 12952-3-1999 |
紡織物.床單的燃燒性能.第3部分:用小的敞開的火焰檢驗易燃性的一般試驗方法 |
(Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998); German version EN ISO 12952-3:1998) |
| DIN EN ISO 12952-4-1999 |
紡織物.床單的燃燒性能.第4部分:用小的敞開的火焰進行的可燃性特殊檢驗方法 |
(Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998); German version EN ISO 12952-4:1998) |
| DIN EN ISO 12956-1999 |
土工和土工相關產品.特性化開口尺寸的測定 |
(Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999); German version EN ISO 12956:1999) |
| DIN EN ISO 12957-1-2005 |
土工合成織物.摩擦特性的測定.第1部分:直接剪切試驗 |
|
| DIN EN ISO 12957-1-2005 |
土工合成織物.摩擦特性的測定.第1部分:直接剪切試驗 |
|
| DIN EN ISO 12957-2-2005 |
土工合成織物.摩擦特性的測定.第2部分:傾斜面試驗 |
|
| DIN EN ISO 12957-2-2005 |
土工合成織物.摩擦特性的測定.第2部分:傾斜面試驗 |
|
| DIN EN ISO 12958-1999 |
土工和土工相關產品.平面水流容量的測定 |
(Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999); German version EN ISO 12958:1999) |
| DIN EN ISO 13000-1-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和設計 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997); German version EN ISO 13000-1:1997) |
| DIN EN ISO 13000-2-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第2部分:試樣的制備和特性的測定 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997); German version EN ISO 13000-2:1997) |
| DIN EN ISO 13002-1999 |
碳纖維.長絲紗命名體制 |
(Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998) |
| DIN EN ISO 1302-2002 |
產品幾何量技術規范.在技術產品文件中表面結構的表示 |
(Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002) |
| DIN EN ISO 1307-1996 |
工業通用橡膠和塑料軟管.內徑和長度公差 |
(Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995) |
| DIN EN ISO 13090-1-1998 |
機械振動和沖擊.試驗及與人有關的實驗安全性指南.第1部分:機械整體振動和反復沖擊的影響 |
(Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998); German version EN ISO 13090-1:1998) |
| DIN EN ISO 13212-1999 |
眼科光學.接觸鏡片保護產品.儲藏壽命的測定導則 |
(Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO 13212:1999); German version EN ISO 13212:1999) |
| DIN EN ISO 13230-1999 |
眼科光學.條形碼規范 |
(Ophthalmic optics - Bar code specifications (ISO 13230:1999); German version EN ISO 13230:1999) |
| DIN EN ISO 13294-1997 |
牙鉆手柄.牙鉆氣動機 |
(Dental handpieces - Dental air-motors (ISO 13294:1997); German version EN ISO 13294:1997) |
| DIN EN ISO 13295-1996 |
牙科旋切器.心軸 |
(Dental rotary instruments - Mandrels (ISO 13295:1994); German version EN ISO 13295:1996) |
| DIN EN ISO 13297-2001 |
小型船舶.電氣系統.交流電設備 |
(Small craft - Electrical systems - Alternating current installations (ISO 13297:2000); German version EN ISO 13297:2000) |
| DIN EN ISO 13337-1998 |
開縫,輕型結構的夾緊銷(夾緊筒). |
(Spring-type straight pins, slotted, light duty (ISO 13337:1997); German version EN ISO 13337:1997) |
| DIN EN ISO 13340-2001 |
可運輸氣瓶.不可再充填的氣瓶用閥門.規范和原型試驗 |
(Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); German version EN ISO 13340:2001) |
| DIN EN ISO 13341-1998 |
可運輸儲氣瓶.閥門和氣瓶間的連接 |
(Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997)(including corrigendum AC); German version EN ISO 13341:1997 + AC:1998) |
| DIN EN ISO 13366-1-1997 |
乳.體細胞的計數.第1部分:顯微法(參照法) |
(Milk - Enumeration of somatic cells - Part 1: Microscopic method (Reference method) (ISO 13366-1:1997); German version EN ISO 13366-1:1997) |
| DIN EN ISO 13366-2-1997 |
乳.體細胞的計數.第2部分:電子粒子計數法 |
(Milk - Enumeration of somatic cells - Part 2: Electronic particle counter method (ISO 13366-2:1997); German version EN ISO 13366-2:1997) |
| DIN EN ISO 13366-3-1997 |
乳.體細胞的計數.第3部分:熒光光電法 |
(Milk - Enumeration of somatic cells - Part 3: Fluoro-opto-electronic method (ISO 13366-3:1997); German version EN ISO 13366-3:1997) |
| DIN EN ISO 13370-1998 |
建筑物的熱性能.經由地面的熱傳遞.計算方法 |
(Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998); German version EN ISO 13370:1998) |
| DIN EN ISO 13395-1996 |
水質.用流量分析法和光譜檢出法測定亞硝酸氮和硝酸氮及兩者的總含量(CFA和FIA). |
(Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996); German version EN ISO 13395:1996) |
| DIN EN ISO 13397-1-1996 |
牙周刮匙,牙刮除器和牙鉆孔器.第1部分:一般要求 |
(Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995); German version EN ISO 13397-1:1995) |
| DIN EN ISO 13397-2 Berichtigung 1-2000 |
對DINENISO13397-2:1996-11的勘誤 |
(Corrigenda to DIN EN ISO 13397-2:1996-11) |
| DIN EN ISO 13397-2-1996 |
牙周刮匙、牙科用刮除器和牙鉆孔器.第2部分:牙周刮匙.Gr型 |
(Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes - Gr-type (ISO 13397-2:1996); German version EN ISO 13397-2:1996) |
| DIN EN ISO 13397-2-2005 |
牙科學.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙 |
|
| DIN EN ISO 13397-3-1996 |
牙周刮匙,牙科刮除器和牙鉆孔器.第3部分:牙科用刮除器.H型 |
(Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996); German version EN ISO 13397-3:1996) |
| DIN EN ISO 13397-4-1998 |
牙周刮匙,牙科刮除器和牙鉆孔器.第4部分:圓形牙鉆孔器 |
(Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators, discoid-type (ISO 13397-4:1997); German version EN ISO 13397-4:1997) |
| DIN EN ISO 13402-2001 |
外科和牙科手動設備.測定耐熱壓蒸、腐蝕和熱曝性 |
(Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000) |
| DIN EN ISO 13406-1-2000 |
平板式視覺顯示工作的人類工效學要求.第1部分:介紹 |
(Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999); German version EN ISO 13406-1:1999) |
| DIN EN ISO 13407-2000 |
交互系統以人為中心的設計過程 |
(Human-centred design processes for interactive systems (ISO 13407:1999); German version EN ISO 13407:1999) |
| DIN EN ISO 13426-1-2003 |
土工織物及其有關產品.內部結構連接強度.第1部分:土工網眼 |
(Geotextiles and geotexile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003); German version EN ISO 13426-1:2003) |
| DIN EN ISO 13427-1998 |
土工織物及其相關制品.磨損模擬(滑塊試驗) |
(Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998) |
| DIN EN ISO 13428-2005 |
土工合成織物.土工合成織物防沖擊損壞保護效果的測定 |
|
| DIN EN ISO 13428-2005 |
土工合成織物.土工合成織物防沖擊損壞保護效果的測定 |
|
| DIN EN ISO 13431-1999 |
土工織物與土工織物相關產品.拉伸蠕變與蠕變斷裂性能測定 |
(Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999); German version EN ISO 13431:1999) |
| DIN EN ISO 13437-1998 |
土工織物及其相關制品.土壤中試樣的安裝和提取的方法以及實驗室中測量試樣的檢驗方法 |
(Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998); German version EN ISO 13437:1998) |
| DIN EN ISO 13438-2005 |
土工織物和土工織物相關產品.測定耐氧化性的篩選試驗方法 |
|
| DIN EN ISO 1346-2005 |
纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3)繩索.3、4和8股繩索 |
|
| DIN EN ISO 13468-1-1997 |
塑料.透明材料光透射率總量的測定.第1部分:單束照射儀 |
(Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996) |
| DIN EN ISO 13473-1-2004 |
利用表面外觀表征路面結構.第1部分:平均剖面高度的測定 |
|
| DIN EN ISO 13478-1997 |
流體傳輸用熱塑管.抗快速裂紋擴展性(RCP)的測定.實物試驗 |
(Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997); German version EN ISO 13478:1997) |
| DIN EN ISO 13479-1997 |
流體傳輸用聚烯烴管.抗破裂擴展性的測定.有凹口的管上裂紋緩慢增長的試驗方法(切口試驗) |
(Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997); German version EN ISO 13479:1997) |
| DIN EN ISO 13485-2001 |
質量體系.醫療裝置.ENISO9001應用的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9001 (Revision of EN 46001:1996) (Identical to ISO 13485:1996); German version EN ISO 13485:2000) |
| DIN EN ISO 13488-2001 |
質量體系.醫療裝置.ENISO9002應用的特殊要求 |
(Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 (Revision of EN 46002:1996) (Identical to ISO 13488:1996); German version EN ISO 13488:2000) |
| DIN EN ISO 13500-1998 |
石油和天然氣工業.鉆孔清洗.規范和試驗 |
(Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998); German version EN ISO 13500:1998) |
| DIN EN ISO 13533-2002 |
石油和天然氣工業.鉆井和生產設備.鉆井設備 |
(Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001 (Text in German and English)) |
| DIN EN ISO 13534-2001 |
石油和天然氣工業.鉆探和生產設備.提升設備的檢驗、維護、修理和再制造 |
(Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); German version EN ISO 13534:2000) |
| DIN EN ISO 13535-2002 |
汽油和天然氣工業.鉆井和生產設備.起重機設備 |
(Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)) |
| DIN EN ISO 13565-1-1998 |
幾何制品規范.紡織表面:輪廓法.表面分層功能特性.第1部分:篩選和一般測量條件 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997) |
| DIN EN ISO 13565-2-1998 |
幾何制品規范.紡織表面:輪廓法.表面分層功能特性.第2部分:利用線材比例曲線表記述高特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997) |
| DIN EN ISO 13565-3-2000 |
幾何產品規范(GPS).表面特征:輪廓法.分層表面的功能特性.第3部分:利用材料的概率曲線描述高度特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); German version EN ISO 13565-3:2000) |
| DIN EN ISO 13567-1-2002 |
技術產品文件.計算機輔助設計(CAD)用層的編排和命名.第1部分:綜述和原則 |
(Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998); German version EN ISO 13567-1:2002) |
| DIN EN ISO 13567-2-2002 |
技術產品文件.計算機輔助設計(CAD)圖層的編排和命名.第2部分:用于建筑工程文件的概念、格式和代碼 |
(Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998); German version EN ISO 13567-2:2002) |
| DIN EN ISO 13590-2004 |
小艇.個人船舶.建造和系統安裝要求 |
|
| DIN EN ISO 13625-2005 |
石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器 |
|
| DIN EN ISO 13625-2005 |
石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器 |
|
| DIN EN ISO 13628-1-1999 |
石油和天然氣工業.水下生產系統的設計和操作.第1部分:一般要求和推薦規范 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999); German version EN ISO 13628-1:1999) |
| DIN EN ISO 13628-2-2002 |
石油和天然氣工業.水下生產系統的設計和操作.第2部分:水下和船用軟管系統 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000); German version EN ISO 13628-2:2000 (German and english text)) |
| DIN EN ISO 13628-3-2003 |
石油和天然氣工業.水下采油系統的設計和操作.第3部分:通流線系統 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000) |
| DIN EN ISO 13628-4-1999 |
石油和天然氣工業.水下生產系統的設計和操作.第4部分:水下井口和主干設備 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999); German version EN ISO 13628-4:1999) |
| DIN EN ISO 13631-2003 |
石油和天然氣工業.封裝的往復式氣體壓縮機 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002) |
| DIN EN ISO 13666-1998 |
眼科光學.眼鏡鏡片.詞匯 |
(Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998); German version EN ISO 13666:1998) |
| DIN EN ISO 13680-2002 |
石油和天然氣工業.用作套管、鋪設管道和連接器材的耐腐蝕合金無縫管.技術交貨條件 |
(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001) |
| DIN EN ISO 13691-2003 |
石油和天然氣工業.高速專用齒輪機構 |
(Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002) |
| DIN EN ISO 13694-2000 |
光學和光學設備.激光和激光相關設備.激光束能量密度分布的試驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000) |
| DIN EN ISO 13695-2004 |
光學和光子學.激光及其相關設備.激光光譜特性的試驗方法 |
|
| DIN EN ISO 13696-2002 |
光學和光學儀器.光學件輻射散射的試驗方法 |
(Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002); German version EN ISO 13696:2002) |
| DIN EN ISO 13702-2000 |
石油和天然氣工業.近海生產設備著火和爆炸的控制和平息.要求和導則 |
(Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999); German version EN ISO 13702:1999) |
| DIN EN ISO 13703-2003 |
石油和天然氣工業.海上作業平臺管道系統的設計和安裝 |
(Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002) |
| DIN EN ISO 13706-2000 |
石油和天然氣工業.風冷熱交換器 |
(Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000); German version EN ISO 13706:2000) |
| DIN EN ISO 13709-2005 |
石油、石油化工和天然氣工業用離心泵 |
|
| DIN EN ISO 13709-2005 |
石油、石油化工和天然氣工業用離心泵 |
|
| DIN EN ISO 13710-2005 |
石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡?/td>
| |
| DIN EN ISO 13710-2005 |
石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡?/td>
| |
| DIN EN ISO 13716-2000 |
牙科學.可逆和不可逆水解膠體印模材料系統 |
(Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999); German version EN ISO 13716:2000) |
| DIN EN ISO 13731-2002 |
熱環境的人類工效學.詞匯和符號 |
(Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001); German version EN ISO 13731:2001) |
| DIN EN ISO 13734-2000 |
天然氣.用做增味劑的有機硫化物.要求和試驗方法 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test method (ISO 13734:1998); German version EN ISO 13734:2000) |
| DIN EN ISO 13736-2000 |
石油產品和其他液態.閃點的測定.阿貝耳閉杯法 |
(Petroleum products and other liquids - Determination of flashpoint - Abel closed cup method (ISO 13736:1997); German version EN ISO 13736:1997) |
| DIN EN ISO 13753-1998 |
機械振動和沖擊.手-臂振動.測量手-臂裝置負載下彈性材料振動傳遞的方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998); German version EN ISO 13753:1998) |
| DIN EN ISO 13757-1998 |
液化石油氣.油殘余物的測定.高溫法 |
(Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996); German version EN ISO 13757:1996) |
| DIN EN ISO 13758-1997 |
液化石油氣.丙烷干燥度檢驗.閥門凍結法 |
(Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996) |
| DIN EN ISO 13759-1997 |
石油產品.柴油燃料中硝酸烷基酯的測定.光譜法 |
(Petroleum Products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996); German version EN ISO 13759:1996) |
| DIN EN ISO 13760-1998 |
壓力下液體輸送用塑料管.Miner法則.累積損傷的計算方法 |
(Plastics pipes for the conveyance of fluids under pressure - Miner`s rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998) |
| DIN EN ISO 13783-1998 |
塑料管體系.未增塑聚氯乙烯(PVC-U)抗拉雙插套管連接件.彎曲和內壁壓力下密封性和機械強度的檢驗方法 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997) |
| DIN EN ISO 13786-1999 |
建筑物件的熱性能.動態熱特性.計算方法 |
(Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999); German version EN ISO 13786:1999) |
| DIN EN ISO 13787-2003 |
建筑設備和工業裝置用熱絕緣產品.聲明的導熱系數的測定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003) |
| DIN EN ISO 13788-2001 |
建筑物組件和件的濕熱性能.避免嚴重的表面潮濕和冷凝的內表面溫度.計算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001); German version EN ISO 13788:2001) |
| DIN EN ISO 13789-1999 |
建筑物熱性質.傳輸熱損耗率.計算方法 |
(Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999); German version EN ISO 13789:1999) |
| DIN EN ISO 13790-2004 |
建筑物的熱性能.房間取暖用能量的計算 |
|
| DIN EN ISO 13791-2005 |
建筑物的熱性能.夏季無機械通風冷卻時房間內部溫度的計算.通用標準和確認程序 |
|
| DIN EN ISO 13792-2005 |
建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 |
|
| DIN EN ISO 13792-2005 |
建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 |
|
| DIN EN ISO 13792-2005 |
建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 |
|
| DIN EN ISO 13793-2001 |
建筑物的熱性能.避免霜凍的地基的熱設計 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001); German version EN ISO 13793:2001) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com