標準號 |
中文名稱 |
英文名稱 |
| EN 4009-2003 |
航空航天系列耐熱鎳基合金 NI-P100HT (Inconel 718) 雙六角頭緊公差柄中長螺紋螺栓等級：1550 MPa (常 |
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4009 (2003-0 |
| EN 4011-2003 |
航空航天系列耐熱鎳基合金 NI-P100HT (Inconel 718)鍍銀、雙六角自鎖螺母等級： 1550 MPa (常溫)/600℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy, TI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4011 (2003-05). |
| EN 4013-2003 |
航空航天系列耐熱鎳基合金 NI-P100HT (Inconel 718)鍍銀自鎖帶柄螺母等級：1550 MPa (常溫)/600℃ |
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4013 (2003-05). |
| EN 4014-2003 |
航空航天系列厚壁自鎖插件設計標準 |
Aerospace series - Inserts, thick wall, self-locking - Design standard / Note: To be replaced by prEN 4014 (2003-05). |
| EN 4015-2003 |
航空航天系列厚壁自鎖插件安裝和拆卸程序 |
Aerospace series - Inserts, thickwall, self-locking - Installation and removal procedure / Note: To be replaced by prEN 4015 (2003-05). |
| EN 4018-2001 |
標準號： |
中文標題： |
| EN 4019-2001 |
標準號： |
中文標題： |
| EN 402-2003 |
呼吸保護裝置 呼吸器管理需要在火災中自救用帶罩過濾裝置 要求、測試和標志 |
Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
| EN 4020-2001 |
標準號： |
中文標題： |
| EN 4021-2001 |
標準號： |
中文標題： |
| EN 4022-2001 |
標準號： |
中文標題： |
| EN 4023-2001 |
標準號： |
中文標題： |
| EN 4024-2001 |
標準號： |
中文標題： |
| EN 4025-2001 |
標準號： |
中文標題： |
| EN 4026-2001 |
標準號： |
中文標題： |
| EN 4027-2001 |
標準號： |
中文標題： |
| EN 4028-2001 |
標準號： |
中文標題： |
| EN 4029-2001 |
標準號： |
中文標題： |
| EN 403-1993 |
自救式呼吸保護設備 火災中自救用帶罩過濾裝置 要求、測試和標志 |
Respiratory protective devices for self-rescue; filtering devices with hood for self-rescue from fire; requirements, testing, marking |
| EN 403-2004 |
自救用呼吸保護器.火災逃生用帶面罩的過濾裝置.要求、檢驗和標記 |
|
| EN 4030-2001 |
標準號： |
中文標題： |
| EN 4031-2001 |
標準號： |
中文標題： |
| EN 404-1993 |
自救式呼吸保護設備 自救式過濾器 要求、測試和標志 |
Respiratory protective for self-rescue; filter self-rescuer; requirements, testing, marking |
| EN 4047-2003 |
航空航天系列鍍銀NI-PH2601 (因康鎳合金 718)耐熱鎳基合金制自鎖ＭＪ螺紋螺母等級：1550 MPa (環境溫度 |
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ - Technical specification / Note: To be replaced by prEN 4047 (2003 |
| EN 4048-2003 |
標準號： |
中文標題： |
| EN 405-2001 |
呼吸保護設備 防氣體或防氣體和顆粒的閥濾式半面罩 要求、測試和標志 |
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
| EN 4051-2002 |
航空航天系列鈦合金管連接 60°球形端口連接 |
Aerospace series - Pipe couplings, 60? spherical, in titanium alloy - Port connection |
| EN 4054-2003 |
航空航天系列管連接、松套法蘭和密封件碳氟橡膠密封件和鋁合金附件技術規范 |
Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; Technical specification / Note: To be replaced by prEN 4054 (2003-05). |
| EN 4058-2001 |
航空航天系列鈦和鈦合金用焊接填縫條和填縫絲直徑 0.5 mm≤D≤ 5.0 mm尺寸 |
Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
| EN 4059-2001 |
航空航天系列鋼焊接用填縫條和填縫絲直徑0,5 mm≤D≤5,0 mm尺寸 |
Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
| EN 4060-2001 |
航空航天系列耐熱合金焊接用填縫條和填縫絲直徑 0.5 mm ≤D≤5.0 mm尺寸 |
Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm; Dimensions |
| EN 4069-1996 |
航空航天系列鈍化耐熱鋼制小矮的普通六角螺母等級：600MPa(環境溫度)/ 650℃ |
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650℃ |
| EN 407-1994 |
防熱危險的保護手套(熱和/或火) |
Protective gloves against thermal risks (heat and/or fire) |
| EN 407-2004 |
防熱危害的手套(高溫和/或火焰) |
|
| EN 408-2003 |
木材構件 結構木材和膠合板木材 某些物理性能和機械性能的測定 |
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
| EN 4085-2001 |
航空航天系列鎳基合金 NI-B40002(NiSi4B2)銅焊用填縫金屬非晶質箔 |
Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Amorphous foil |
| EN 409-1993 |
木材構件 試驗方法 榫型緊固件屈服力矩的測定 釘入法 |
Timber structures - Test methods - Determination of the yield moment of dowel type fasteners - Nails |
| EN 410-1998 |
建筑物用玻璃 裝玻璃構件的發光和陽光特性的測定 |
Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 41003-1998 |
電信網絡連接設備的特殊安全要求 |
Particular safety requirements for equipment to be connected to telecommunication networks |
| EN 4103-2001 |
航空航天系列鎳基合金 NI-B40002(NiSi4B2)釬焊用添縫金屬硼化物箔 |
Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Borided foil |
| EN 4104-2001 |
航空航天系列鎳基合金 NI-B40002釬焊用添縫金屬粉末和糊狀 |
Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing; Powder or paste |
| EN 4105-1998 |
航空航天系列鎳基合金NI-B40002(NiSi4B2)釬焊用添縫金屬窄條帶材 |
Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape |
| EN 4113-2001 |
航空航天系列帶橡膠墊減震鈍化的耐腐蝕鋼環形Ｐ型卡箍尺寸、質量 |
Aerospace series - Clamps, loop (P type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses |
| EN 4114-2001 |
航空航天系列帶橡膠墊減震的鋁合金環形Ｐ型卡箍尺寸、質量 |
Aerospace series - Clamps, loop (P type) in aluminium alloy with rubber cushioning - Dimensions, masses |
| EN 4115-2001 |
航空航天系列卡箍橡膠墊尺寸、質量 |
Aerospace series - Cushion, rubber for clamps - Dimensions, masses |
| EN 4116-2003 |
航空航天系列FE-PA92HT (A286)耐熱鋼制自鎖螺紋鍍銀六角螺母等級：1100 MPa (環境溫度)/425 ℃ |
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/425℃ / Note: To be replaced by prEN 4116 (2003-05). |
| EN 4117-2003 |
航空航天系列耐熱鑷基合金 NI-PH2601 (鉻鑷鐵合金718)制自鎖螺紋鍍銀雙六角螺母等級：1550 MPa (環境溫 |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4117 (2003-05). |
| EN 4118-2003 |
航空航天系列FE-PA92HT (A286)耐熱鋼 形自鎖螺紋鍍銀雙六角螺母等級：1100 MPa (環境溫度)/650 ℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4118 (2003-05). |
| EN 4119-2003 |
航空航天系列FE-PA92HT (A286)耐熱鋼形自鎖深孔螺紋鍍銀雙六角螺母等級：1100 MPa (環境溫度)/650 ℃ |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4119 (2003-05). |
| EN 4120-2003 |
航空航天系列耐熱鎳基合金 NI-PH-1302 (Waspaloy)、自鎖螺紋鍍銀雙六角螺母等級：1200 MPa (環境溫度)/ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), sliver plated on thread - Classification: 1 210 MPa (at ambient temperature)/730℃ / Note: To be replaced by prEN 4120 (2003-05). |
| EN 4121-2003 |
航空航天系列 FE-PA92HT (A286)耐熱鋼、帶鋸齒自鎖螺紋鍍銀帶柄螺母等級：1100 MPa (環境溫度)/650 ℃ |
Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4121 (2003-05). |
| EN 4122-2003 |
航空航天系列FE-PA92HT (A286)耐熱鋼 、自鎖螺紋鍍銀帶柄螺母等級：1100 MPa (環境溫度)/650 ℃ |
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4122 (2003-05). |
| EN 4123-2003 |
航空航天系列耐熱鎳基合金 NI-PH2601 HT (Inconel 718)、自鎖螺紋鍍銀帶柄螺母等級：1550 MPa (環境溫 |
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4123 (2003-05). |
| EN 4124-2003 |
航空航天系列60°型模用耐熱鎳基合金 NI-PH-1302 (Waspaloy)制自鎖螺紋鍍銀帶柄螺母等級：1210 MPa (環 |
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread, for 60 swage - Classification: 1 210 MPa (at ambient temperature)/730℃ / Note: To be replaced by prEN 4124 (2003-05). |
| EN 413-1-2004 |
圬工混凝土.第1部分:組成、規范和合格標準 |
|
| EN 413-2-1994 |
圬工用水泥 第2部分：試驗方法 |
Masonry cement - Part 2: Test methods |
| EN 414-2000 |
機械安全 安全標準的起草和報批規則 |
Safety of machinery - Rules for the drafting and presentation of safety standards |
| EN 415-1-2000 |
包裝機械安全 第1部分：包裝機械及相關設備的術語和分類 |
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
| EN 415-2-1999 |
包裝機械安全 第2部分：預成型剛性容器包裝機械 |
Packaging machines safety - Part 2: Pre-formed rigid container packaging machines |
| EN 415-3-1999 |
包裝機械安全 第3部分：成型、填充和密封機械 |
Safety of packaging machines - Part 3: Form, fill and seal machines |
| EN 4166-2003 |
航空航天系列３片式彈簧夾 PTFE 套筒 |
Aerospace series - Clips, spring tension, three parts - PTFE bushes / Note: To be replaced by prEN 4166 (2003-05). |
| EN 4167-2003 |
航空航天系列３片式彈簧夾FE-PA92HT (A286)耐熱鋼內夾片 |
Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA92HT (A286) / Note: To be replaced by prEN 4167 (2003-05). |
| EN 4168-2003 |
航空航天系列３片式彈簧夾FE-PA92HT (A286)耐熱鋼外夾片 |
Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA92HT (A286) / Note: To be replaced by prEN 4168 (2003-05). |
| EN 417-2003 |
用于便攜式灶具的、帶或不帶閥門的液化石油氣用一次性金屬氣筒 制作、檢驗、測試和標志 |
Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
| EN 4179-2000 |
航空航天系列無損檢驗人員的資格和鑒定 |
Aerospace series - Qualification and approval of personnel for non-destructive testing |
| EN 418-1992 |
機械安全 功能方面的緊急停止設備 設計原則 |
Safety of machinery; Emergency stop equipment, functional aspects; Principles for design |
| EN 4182-2001 |
航空航天系列鈦合金管連接8°30′ 軋制三通 |
Aerospace series - Pipe coupling 8 Degree?30′in titanium alloy - Tees, reduced |
| EN 4183-2001 |
航空航天系列鈦合金管連接8°30′焊接端 ９０°彎頭 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?welded ends |
| EN 4184-2001 |
航空航天系列鈦合金管連接8°30′焊接端 ４５°彎頭 |
Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Elbows 45? welded ends |
| EN 4185-2001 |
航空航天系列鈦合金管連接8°30′長時間運行艙壁三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees bulkhead on run long |
| EN 4186-2001 |
航空航天系列鈦合金管連接8°30′四通管接頭 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, cross |
| EN 4187-2001 |
航空航天系列鈦合金管連接8°30′艙壁９０度彎頭 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long |
| EN 4188-2001 |
空航天系列鈦合金管連接8°30′焊接端艙壁９０度彎頭 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long, welded end |
| EN 4189-2001 |
空航天系列鈦合金管連接8°30′長艙壁三通管 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, bulkhead branch, long |
| EN 4190-2001 |
空航天系列鈦合金管連接8°30′管道上有推力絲螺母的異徑三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced with thrust wire nut on run |
| EN 4191-2001 |
航空航天系列鈦合金管連接8°30′長艙壁用異徑三通 |
Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Tees, reduced, bulkhead branch, long |
| EN 4192-2001 |
航空航天系列鈦合金管連接8°30′艙壁用異徑三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced bulkhead branch |
| EN 4193-2001 |
航空航天系列鈦合金管連接8°30′長時運行艙壁用異徑三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced bulkhead on run long |
| EN 4194-2001 |
航空航天系列鈦合金管連接8°30′艙壁用異徑三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced, bulkhead |
| EN 420-2003 |
防護手套的一般要求和試驗方法 |
Protective gloves - General requirements and test methods |
| EN 421-1994 |
預防電離輻射和放射性污染的防護手套 |
Protective gloves against ionizing radiation and radioactive contamination |
| EN 422-1995 |
橡膠和塑料機械 安全 生產空心制品的吹模機械 設計和制造的要求 |
Rubber and plastics machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction |
| EN 423-2001 |
彈性地板覆蓋物 耐污斑性的測定 |
Resilient floor coverings - Determination of resistance to staining |
| EN 4233-2001 |
航空航天系列鈦合金管連接 8°30′焊接螺紋管接頭 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded |
| EN 424-2001 |
彈性地板覆蓋物 家具腿模擬移動效果的測定 |
Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg |
| EN 425-2002 |
彈性和層狀地板覆蓋物 腳輪椅子試驗 |
Resilient and laminate floor coverings - Castor chair test |
| EN 4250-2001 |
航空航天系列鎳基合金 NI-B41001(NiCr19Si7B)釬焊用填縫金屬非晶質箔 |
Aerospace series - Nickel base alloy NI-B41001 (NiCr19Si7B) - Filler metal for brazing; Amorphous foil |
| EN 4258-1998 |
航空航天系列金屬材料標準化的一般組織歐洲標準的類型和其使用之間的鏈接 |
Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 426-1993 |
彈性地板覆蓋物 板材寬度、長度、平直度和平面度的測定 |
Resilient floorcoverings; determination of width, length, straightness and flatness of sheet material |
| EN 4267-2001 |
航空航天系列鈦和鈦合金圓棒直徑 6 mm≤D≤160 mm尺寸 |
Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm ≤ D ≤ 160 mm - Dimensions |
| EN 427-1994 |
彈性地板覆蓋物 瓷磚邊長、垂直度和平直度的測定 |
Resilient floor coverings - Determination of the side length, squareness and straightness of tiles |
| EN 428-1993 |
彈性地板覆蓋物 總厚度測定 |
Resilient floor coverings; determination of overall thickness |
| EN 429-1993 |
彈性地板覆蓋物 疊層厚度的測定 |
Resilient floor coverings; determination of the thickness of layers |
| EN 430-1994 |
彈性地板覆蓋物 單位面積質量的測定 |
Resilient floor coverings - Determination of mass per unit area |
| EN 431-1994 |
彈性地板覆蓋物 耐剝離性的測定 |
Resilient floor coverings - Determination of peel resistance |
| EN 432-1994 |
彈性地板覆蓋物 剪切力測定 |
Resilient floor coverings - Determination of shear force |
| EN 4321-2003 |
航空航天系列鍍銀耐熱鎳基合金 NI-PH2601 (Inconel 718)制帶安全鎖線孔的細柄長螺紋雙六角頭螺栓等級 |
Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by |
| EN 4324-2001 |
航空航天系列鋁合金AL-W42201焊接用填縫金屬桿 |
Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod |
| EN 4325-2001 |
航空航天系列耐熱合金 NI-WH1302(NiCr20Co13Mo4Ti3Al)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod |
| EN 4326-2001 |
航空航天系列耐熱合金 CO-WH4102(CoCr28W20Ni5V1)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod |
| EN 4327-2001 |
航空航天系列耐熱合金CO-WH1401(CoCr26Ni11W8)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod |
| EN 4328-2002 |
航空航天系列鋼 FE-WM1601 (X18CrWNi13-3-2)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding; Wire and rod |
| EN 4329-2001 |
航空航天系列 耐熱合金NI-WH0001(NiCr20)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod |
| EN 433-1994 |
彈性地板覆蓋物 靜荷載后殘留壓痕的測定 |
Resilient floor coverings - Determination of residual indentation after static loading |
| EN 4330-2002 |
航空航天系列鋼 FE-WA4802 (X8CrNiMn27-22-2)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding; Wire and rod |
| EN 4331-2002 |
航空航天系列鋼 FE-WL1804 (25CrMnMo4-2-2)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding; Wire and rod |
| EN 4332-2002 |
航空航天系列鋼 FE-WL1805 (8CrMnMo12-4-9)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding; Wire and rod |
| EN 4333-2002 |
航空航天系列鋼 FE-WL1805 (X5CrNiCoMoWMn21-20-20-3-3-2)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding; Wire and rod |
| EN 4334-2002 |
航空航天系列鋼 FE-WL1806 (15CrMnMoV5-4-9-3)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding; Wire and rod |
| EN 4335-2002 |
航空航天系列鋼 FE-WA2602 (X4NiCrTiMoV26-15)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding; Wire and rod |
| EN 4336-2002 |
航空航天系列鋼 FE-WA3801 (X4CrNiMn20-10-2)焊接用填縫金、絲和桿 |
Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding; Wire and rod |
| EN 4337-2001 |
航空航天系列耐熱合金 NI-WH8901(NiCr16Ti3Mn2)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod |
| EN 4338-2001 |
航空航天系列 耐熱合金NI-WH3902(NiCr25Mo10C)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod |
| EN 4339-2001 |
航空航天系列耐熱合金 CO-WH4001(CoCr29W9)焊接用填縫金屬絲和桿 |
Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding; Wire and rod |
| EN 434-1994 |
彈性地板覆蓋物 尺寸穩定性和受熱卷曲的測定 |
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat |
| EN 4340-2002 |
航空航天系列鎂合金 MG-W68001焊接用填縫金屬絲和桿 |
Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod |
| EN 4341-2001 |
航空航天系列鋁合金 AL-W46431焊接用填縫金屬絲和桿 |
Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod |
| EN 4342-2001 |
航空航天系列鈦TI-W99001焊接用填縫金屬絲和桿 |
Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod |
| EN 4343-2002 |
航空航天系列鋼 FE-WM1001(X13Cr12)焊接填縫金屬絲和桿 |
Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding; Wire and rod |
| EN 4344-2001 |
航空航天系列鋼 FE-WM1002 (X13Cr13)焊接用填縫金屬絲和桿 |
Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding; Wire and rod |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com