標準號 |
中文名稱 |
英文名稱 |
| EN 61105-1993 |
磁帶錄像機系統用參考帶 |
Reference tapes for video tape recorder systems (IEC 61105:1991) |
| EN 61106-1993 |
視盤參數測量方法 |
Videodisks-Methods of measurements for parameters (IEC 61106:1993) |
| EN 61108-1-1996 |
全球?qū)Ш叫l(wèi)星系統(GNSS)第1部分：全球定位系統(GPS)接收機設備性能標準、試驗方法和要求的試驗結果 |
Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results (IEC 61108-1:1996) |
| EN 61108-2-1998 |
海上導航和無線電通訊設備和系統全球?qū)Ш叫l(wèi)星系統(GNSS)第2部分：全球?qū)Ш叫l(wèi)星系統(GLONASS)接收設備 |
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test result |
| EN 61108-4-2004 |
海上導航和無線電通信設備與系統.全球?qū)Ш叫l(wèi)星系統(GNSS).第4部分:船載DGPS和DGLONASS海上無線電信號接收設備.性能要求、試驗方法和要求的試驗結果 |
|
| EN 61110-1992 |
船用奧米伽系統和差?yuàn)W米伽接收機操作和性能要求試驗方法和要求的試驗結果 |
System Omega and differential Omega receivers for ships; operational and performance requirements; methods of testing and required test results (IEC 61110:1992) |
| EN 61114-1-1999 |
11/12 GHz頻帶衛星廣播傳輸接收天線第1部分：電氣測量 |
Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band - Part 1: Electrical measurements (IEC 61114-1:1999) |
| EN 61114-2-1996 |
11/12 GHz頻帶衛星廣播傳輸接收天線的測量方法第2部分：個人用及公用接收天線的機械和環境試驗 |
Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas (IEC 61114-2:1996) |
| EN 61115-1993 |
過程分析器試樣處理系統性能表示 |
Expression of performance of sample handling systems for process analyzers (IEC 61115:1992) |
| EN 61116-1994 |
小型水電站機電設備安裝指南 |
Electromechanical equipment guide for small hydroelectric installations (IEC 61116:1992) |
| EN 61118-1993 |
用12.65mm(0.5 in)磁帶的螺旋掃描盒式磁帶錄像系統M2型 |
Helical-scan video tape cassette using 12,65 mm (0,5 in) magnetic tape-Type M2 (IEC 61118:1993) |
| EN 61119-1-1994 |
數字音頻盒式磁帶系統(DAT)第1部分：尺寸和特性 |
Digital Audio Tape cassette system (DAT) - Part 1: Dimensions and characteristics (IEC 61119-1:1992) |
| EN 61119-2-1994 |
數字音頻盒式磁帶系統(DAT)第2部分：DAT校正磁帶 |
Digital Audio Tape cassette system (DAT) - Part 2: DAT calibration tape (IEC 61119-2:1991) |
| EN 61119-3-1994 |
數字音頻盒式磁帶系統(DAT)第3部分：DAT磁帶性能 |
Digital audio tape cassette system (DAT) - Part 3: DAT tape properties (IEC 61119-3:1992) |
| EN 61119-5-1995 |
數字音頻盒式磁帶系統(DAT)第5部分：專業用數字音頻盒式磁帶系統 |
Digital audio tape cassette system (DAT) - Part 5: DAT for professional use (IEC 61119-5:1993) |
| EN 61119-6-1994 |
數字音頻盒式磁帶系統(DAT)第6部分：系列復制管理系統 |
Digital audio tape cassette system (DAT) - Part 6: Serial copy management system (IEC 61119-6:1992) |
| EN 61120-2-1993 |
專業用6.3mm磁帶的數字音頻盤式磁帶盤錄音系統第2部分：格式A |
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use-Part 2: Format A (IEC 61120-2:1991) |
| EN 61120-3-1993 |
專業用6.3mm磁帶的數字音頻盤式磁帶盤錄音系統第3部分：格式B |
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use-Part 3: Format B (IEC 61120-3:1991) |
| EN 61120-4-1992 |
專業用6.3mm磁帶的數字音頻盤式磁帶盤錄音系統第4部分：磁帶性能：定義和測量方法 |
Digital audio tape recorder; reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 4: magnetic tape properties: definitions and methods of measurement (IEC 61120-4:1992) |
| EN 61120-5-1995 |
專業用6.3mm磁帶的數字音頻盤式磁帶盤錄音系統第5部分：帶盤 |
Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use - Part 5: Reels (IEC 61120-5:1995) |
| EN 61122-1993 |
靜止視頻軟盤磁性錄制系統 |
Still video floppy disk magnetic recording system (IEC 61122:1992) |
| EN 61125-1993 |
未使用過的烴基絕緣液體評定氧化穩定性的試驗方法 |
Unused hydrocarbon-based insulating liquids - test methods for evaluating the oxidation stability (IEC 61125:1992 + Corrigendum 1992) |
| EN 61131-1-2003 |
可編程控制器第1部分：一般資料 |
Programmable controllers - Part 1: General information (IEC 61131-1:2003) / Note: Endorsement notice |
| EN 61131-2-2003 |
可編程控制器第2部分：設備要求和試驗 |
Programmable controllers - Part 2: Equipment requirements and tests (IEC 61131-2:2003) / Note: Endorsement notice |
| EN 61131-3-2003 |
可編程控制器第3部分：編程語言 |
Programmable controllers - Part 3: Programming languages (IEC 61131-3:2003) / Note: Endorsement notice |
| EN 61131-5-2001 |
可編程控制器第5部分：通信 |
Programmable controllers - Part 5: Communications (IEC 61131-5:2000) |
| EN 61131-7-2000 |
可編程控制器第7部分：模糊控制編程 |
Programmable controllers - Part 7: Fuzzy control programming (IEC 61131-7:2000) |
| EN 61135-1994 |
臺卡導航系統船用接收機最低性能標準試驗方法和要求的試驗結果 |
Decca navigator system: Receivers for ships - Minimum performance standards -Methods of testing and required test results (IEC 61135:1992) |
| EN 61136-1-1995 |
半導體電力變流器可調速電氣傳動系統一般要求第1部分：特別是對直流電動機傳動的定額規范 |
Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1: Rating specifications, particularly for d.c. motor drives (IEC 61136-1:1992, modified) |
| EN 61140-2002 |
電擊防護設施和設備的共同方面 |
Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2001) |
| EN 61143-2-1994 |
電氣測量?jī)x表X-t記錄儀第2部分：推薦的附加試驗方法 |
Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods (IEC 61143-2:1992) |
| EN 61144-1993 |
測定絕緣液體氧指數的試驗方法 |
Test method for the determination of oxygen index of insulating liquids (IEC 61144:1992) |
| EN 61146-1-1996 |
攝像機(PAL/SECAM/NTSC)測量方法第1部分：非廣播單傳感器攝像機 |
Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 1: Non-broadcast single-sensor cameras (IEC 61146-1:1994) |
| EN 61146-2-1997 |
攝像機(PAL/SECAM/NTSC)測量方法第2部分：兩個和三個傳感器的專業攝影機 |
Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras (IEC 61146-2:1997) |
| EN 61146-3-1997 |
攝影機(PAL/SECAM/NTSC)測量方法第3部分：非廣播用攝像記錄器 |
Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 3: Non-broadcast camera-recorders (IEC 61146-3:1997) |
| EN 61146-4-1998 |
攝影機(PAL/SECAM/NTSC)測量方法第4部分：攝影機和攝像記錄器的自動功能 |
Video cameras (PAL/SECAM/NTSC) - Methodes of measurement - Part 4: Automatic functions of video cameras and camera-recorders (IEC 61146-4:1998) |
| EN 61150-1993 |
堿性二性電池和電池組密封鎳鎘扣式可充電整體電池組 |
Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design (IEC 61150:1992 + corrigendum 1992) |
| EN 61152-1994 |
金屬護套溫度計件尺寸 |
Dimensions of metal-sheathed thermometer elements (IEC 61152:1992, modified) |
| EN 61157-1994 |
對醫療超聲波診斷設備聲輸出的要求 |
Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157:1992) |
| EN 61158-2-1994 |
工業控制系統用范圍總線標準第2部分：物理層規范和服務定義 |
Fieldbus standard for use in industrial control systems; part 2: physical layer specification and service definition (IEC 61158-2:1993) |
| EN 61158-2/prA1-2000 |
工業控制系統用范圍總線標準第2部分：物理層規范和服務定義修改prA1 |
Signal polarity requirements for wire media |
| EN 61158-3-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.第3部分:數據鏈路服務定義(IEC 61158-3-2003) |
|
| EN 61158-4-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.第4部分:數據鏈路協議規范 |
|
| EN 61158-5-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用現場總線.第5部分:應用層服務定義 |
|
| EN 61158-6-2004 |
測量和控制用數字?jǐn)?shù)據通信.工業控制系統用通信總線.第6部分:應用層協議規范 |
|
| EN 61162-1-2000 |
海上導航和無線電通信設備及系統數字接口第1部分：?jiǎn)瓮ㄔ捚骱投嗍茉捚?/td>
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2000) |
| EN 61162-2-1998 |
海上導航和無線電通信設備及系統數字接口第2部分：?jiǎn)瓮ㄔ捚骱投嗍茉捚�、高速傳�?/td>
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission (IEC 61162-2:1998) |
| EN 61162-400-2002 |
海上導航和無線電通信設備及系統數字接口第400部分：多能話器和多受話器船用系統互連介紹和一般原 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 400: Multiple talkers and multiple listeners; Ship systems interconnection; Introduction and general principles (IEC 61162-400:2001) / Note: Endorsement notice |
| EN 61162-401-2002 |
海上導航和無線電通信設備及系統數字接口第401部分：多能話器和多受話器船用系統互連應用輪廓 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 401: Multiple talkers and multiple listeners; Ship systems interconnection; Application profile (IEC 61162-401:2001) |
| EN 61162-410-2002 |
海上導航和無線電通信設備及系統數字接口第401部分：多能話器和多受話器船用系統互連傳輸輪廓要求 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 410: Multiple talkers and multiple listeners; Ship systems interconnection; Transport profile requirements and basic transport profile (IEC 61162-410:2001) |
| EN 61162-420-2002 |
海上導航和無線電通信設備及系統數字接口第401部分：多能話器和多受話器船用系統互連相關標準要求 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420: Multiple talkers and multiple listeners; Ship systems interconnection; Companion standard requirements and basic companion standards (IEC 61162-420:2001) |
| EN 61164-2004 |
可靠性增長.統計試驗和評估方法 |
|
| EN 61166-1993 |
高壓交流斷路器高壓交流斷路器抗地震性能驗證指南 |
High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers (IEC 61166:1993) |
| EN 61168-1994 |
放射治療模擬機功能特性 |
Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993) |
| EN 61169-1-1-1997 |
射頻連接器第1-1部分：?jiǎn)蝹�(gè)、多系列、雙語空白詳細規范 |
Radio-frequency connectors - Part 1-1: Single, multi-series, dual-language blank detail specification (IEC 61169-1-1:1996) |
| EN 61169-2-2001 |
射頻連接器第2部分：分規范9.52型射頻同軸連接器 |
Radio-frequency connectors - Part 2: Sectional specification; Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2001) |
| EN 61169-24-2001 |
射頻連接器第24部分：分規范帶有螺旋聯接器、通常用于75Ω電纜分配系統(F型)的射頻同軸連接器 |
Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 61169-24:2001) |
| EN 61169-31-1999 |
射頻連接器第31部分：外導體內徑為1.0mm(0.039in)的螺紋連接射頻同軸連接器特性阻抗50Ω(1.0型) |
Radio frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50Ω (type 1,0) (IEC 61169-31:1999) |
| EN 61169-32-1999 |
射頻連接器第32部分：外導體內徑為1.85mm(0.072in)的螺紋連接射頻同軸連接器特性阻抗50Ω(1.85型) |
Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50Ω (type 1,85) (IEC 61169-32:1999) |
| EN 61169-33-1997 |
射頻連接器第33部分：BMA 系列射頻連接器的分規范 |
Radio-frequency connectors - Part 33: Sectional specification for series BMA r.f. connectors (IEC 61169-33:1996) |
| EN 61169-36-1997 |
射頻連接器第36部分：塔鎖連接微小型射頻同軸連接器的分規范特性阻抗50Ω(MCX型) |
Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50Ω (type MCX) (IEC 61169-36:1996) |
| EN 61173-1994 |
光電發電系統過壓保護指南 |
Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992) |
| EN 61174-2001 |
海上導航和無線電通信設備及系統電子流程圖展示和信息系統(ECDIS)操作和性能要求、試驗方法和要求的試 |
Maritime navigation and radiocommunication equipment systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (IEC 61174:2001) / Note: Endorsement notice |
| EN 61175-1993 |
信號和連接代號 |
Designations for signals and connections (IEC 61175:1993) |
| EN 61176-1993 |
手持式市電供電的電動圓鋸性能測試方法 |
Hand-held electric mains voltage operated circular saws; methods for measuring the performance (IEC 61176:1993) |
| EN 61179-1993 |
使用19mm磁帶D2格式(NTSC、PAL、PAL-M)的螺旋掃描數字復合盒式錄像系統 |
Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) (IEC 61179:1993) |
| EN 61180-1-1994 |
低壓設備的高壓試驗技術第1部分：定義、試驗和程序要求 |
High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements (IEC 61180-1:1992) |
| EN 61180-2-1994 |
低壓設備的高壓試驗技術第2部分：試驗設備 |
High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994) |
| EN 61181-1993 |
浸漬絕緣材料溶解氣體分析(DGA)應用于電氣設備的工廠試驗 |
Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993) |
| EN 61183-1994 |
電聲學聲級計的無規定射聲場及擴散聲場的校正 |
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994) |
| EN 61184-2004 |
卡口燈座 |
|
| EN 61185-1997 |
電源用磁氧化ETD芯尺寸 |
Magnetic oxide cores (ETD-cores) intended for use in power supply applications - Dimensions (IEC 61185:1992 + A1:1995) |
| EN 61187-1994 |
電氣和電子測量設備文件 |
Electrical and electronic measuring equipment - Documentation (IEC 61187:1993, modified) |
| EN 61188-1-1-1997 |
印制電路板和印制電路板組件設計和使用第1-1部分：一般要求電子組件平整度情況 |
Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements - Flatness considerations for electronic assemblies (IEC 61188-1-1:1997) |
| EN 61188-1-2-1998 |
印制電路板和印制電路板組件設計和使用第1-2部分：一般要求控制阻抗 |
Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements - Controlled impedance (IEC 61188-1-2:1998) |
| EN 61188-5-1-2002 |
印制電路板和印制電路板組件設計和使用第5-1部分：附著(焊接/接合)的考慮通用要求 |
Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations; Generic requirements (IEC 61188-5-1:2002) / Note: Endorsement notice |
| EN 61188-5-2-2003 |
印制電路板和印制電路板組件設計和使用第5-2部分：附著(焊接/接合)的考慮分立件 |
Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations; Discrete components (IEC 61188-5-2:2003) / Note: Endorsement notice |
| EN 61188-5-6-2003 |
印制電路板和印制電路板組件設計和使用第5-6部分：附著(焊接/接合)的考慮四邊帶有J導線的晶片載體 |
Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003) / Note: Endorsement notice |
| EN 61189-2/prA2-1998 |
電氣材料、互連結構和組件的試驗方法第2部分：互連結構用材料的試驗方法修改2 |
Amendment 2 to IEC 61189-2: Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN 61189-3/prA2-1998 |
電氣材料、互連結構和組件的試驗方法第3部分：互連結構(印制電路板)的試驗方法修改2 |
Amendment 2 to IEC 61189-3: Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures |
| EN 61190-1-1-2002 |
電子組件的附著材料第1-1部分：電子組件優質互連用焊劑的要求 |
Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (IEC 61190-1-1:2002) / Note: Endorsement notice |
| EN 61190-1-2-2002 |
電子組件的附著材料第1-2部分：電子組件優質互連用焊膏的要求 |
Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronics assembly (IEC 61190-1-2:2002) / Note: Endorsement notice |
| EN 61190-1-3-2002 |
電子組件的附著材料第1-3部分：電焊用電級焊合金、熔解性及非熔解性焊料的要求 |
Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2002) / Note: Endorsement notice |
| EN 61191-1-1998 |
印刷電路板組件第1部分：總規范使用表面安裝和相關裝配技術的焊接電氣和電子組件的要求 |
Printed board assemblies - Part 1: Generic specification: Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998) |
| EN 61191-2-1998 |
印刷電路板組件第2部分：分規范表面安裝焊接組件的要求 |
Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998) |
| EN 61191-3-1998 |
印刷電路板組件第3部分：分規范通孔安裝焊接組件的要求 |
Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998) |
| EN 61191-4-1998 |
印刷電路板組件第4部分：分規范端點焊接組件的要求 |
Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998) |
| EN 61192-1-2003 |
軟焊電子組件的工藝要求第1部分：總則 |
Workmanship requirements for soldered electronic assemblies - Part 1: General (IEC 61192-1:2003) / Note: Endorsement notice |
| EN 61192-2-2003 |
軟焊電子組件的工藝要求第2部分：表面安裝組件 |
Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mounted assemblies (IEC 61192-2:2003) / Note: Endorsement notice |
| EN 61192-3-2003 |
軟焊電子組件的工藝要求第3部分：穿孔安裝組件 |
Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies (IEC 61192-3:2002) / Note: Endorsement notice |
| EN 61192-4-2003 |
軟焊電子組件的工藝要求第4部分：端點組件 |
Workmanship requirements for soldered electronic assemblies - Part 4: Terminal assemblies (IEC 61192-4:2002) / Note: Endorsement notice |
| EN 61193-1-2002 |
質量評定體系第1部分：印制電路板組件缺陷的登記和分析 |
Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies (IEC 61193-1:2001) |
| EN 61194-1995 |
獨立式光伏(PV)系統的特性參數 |
Characteristic parameters of stand-alone photovoltaic(PV) systems (IEC 61194:1992, modified) |
| EN 61195-1999 |
雙端熒光燈安全規范 |
Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999) |
| EN 61196-2-2003 |
射頻電纜規范第2部分：聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 |
Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice |
| EN 61196-3-1998 |
射頻電纜第3部分：局域網用同軸電纜分規范 |
Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998) |
| EN 61196-3-2-1997 |
射頻電纜第3-2部分：水平層布線數字通信用同軸電纜有效半徑為185m、速率10Mb/s及以下的局域網用實心介 |
Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997) |
| EN 61196-3-3-1997 |
射頻電纜第3-3部分：水平層布線數字通信用同軸電纜有效半徑為185m、速率10Mb/s及以下的局域網用泡沫介 |
Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997) |
| EN 61196-4-2004 |
同軸通信電纜.第4部分:輻射電纜的分規范 |
|
| EN 61197-1994 |
絕緣油直線火焰蔓延使用玻璃纖維帶的試驗方法 |
Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape (IEC 61197:1993) |
| EN 61198-1994 |
絕緣礦物油2-糠醛和有關化合物的測定方法 |
Mineral insulating oils - methods for the determination of 2-furfural and related compounds (IEC 61198:1993) |
| EN 61199-1999 |
單端熒光燈安全規范 |
Single-capped fluorescent lamps - Safety specifications (IEC 61199:1999) |
| EN 61202-1-2000 |
纖維光學隔離器第1部分：通用規范 |
Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000) |
| EN 61203-1994 |
電工用合成有機酯設備中變壓器酯類的維護指南 |
Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992) |
| EN 61204-3-2000 |
直流輸出的低壓電源裝置第3部分：電磁兼容 |
Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000) |
| EN 61204-6-2001 |
直流輸出的低壓電源裝置第6部分：具有評估性能的低壓電源裝置的要求 |
Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000) |
| EN 61205-1994 |
超聲學牙齒除垢系統輸出特性的測量和標示 |
Ultrasonics; Dental descaler systems; Measurement and declaration of the output characteristics (IEC 61205:1993) |
| EN 61206-1995 |
超聲學連續波多普勒系統試驗規程 |
Ultrasonics - Continuous-wave Doppler systems - Test procedures (IEC 61206:1993) |
| EN 61207-1-1994 |
氣體分析器的性能表示第1部分：總則 |
Expression of performance of gas analyzers; part 1: general (IEC 61207-1:1994) |
| EN 61207-2-1994 |
氣體分析器的性能表示第2部分：氣體中的氧(利用高溫電化學傳感器) |
Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994) |
| EN 61207-3-2002 |
氣體分析器性能表示第3部分：順磁氧氣分析器 |
Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002) / Note: Endorsement notice |
| EN 61207-3/prA1-1999 |
氣體分析器性能表示第3部分：順磁氧氣分析器修改prA1 |
Amendment 1 to IEC 61207-3: Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| EN 61207-6-1994 |
氣體分析器的性能表示第6部分：光度分析器 |
Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994) |
| EN 61208/prA1-1994 |
電氣測量?jī)x器X-Y記錄器修改prA1 |
Electrical measuring instruments - X-Y recorders |
| EN 61209-1999 |
海上導航和無線電通信設備及系統集成橋系統(IBS)操作和性能要求、試驗方法和要求的試驗結果 |
Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999) |
| EN 61210-1995 |
連接器件銅導線用扁型速接端子安全要求 |
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified) |
| EN 61212-1-1995 |
電工用熱固性樹脂工業硬質圓形層壓管和棒第1部分：一般要求 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements (IEC 61212-1:1995) |
| EN 61212-2-1996 |
電工用熱固性樹脂工業硬質圓形層壓管和棒第2部分：試驗方法 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:1995) |
| EN 61212-3-1-1995 |
電工用熱固性樹脂工業硬質圓形層壓管和棒第3部分：?jiǎn)雾?xiàng)材料規范活頁1：圓形層壓卷制管 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:1995) |
| EN 61212-3-2-1995 |
電工用熱固性樹脂工業硬質圓形層壓管和棒第3部分：?jiǎn)雾?xiàng)材料規范活頁2：圓形層壓模制管 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com