標準號 |
中文名稱 |
英文名稱 |
| DIN EN 60603-10-1998 |
頻率3MHZ以下印制電路用插接件.第10部分:帶逆轉型2,54mm(0,1in)網柵的印制電路用間接插接件 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC 60603-10:1991); German version EN 60603-10:1998) |
| DIN EN 60603-12-1998 |
頻率3MHZ以下印制電路用插接件.第12部分:印制電路用系列插座的尺寸,一般要求和檢驗的詳細規范 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated cicuits (IEC 60603-12:1992); German version EN 60603 |
| DIN EN 60603-13-1998 |
頻率低于3MHz的印制電路板.截斷端子終端接點用帶自由插接件和網柵2,54(0,1in)的印制電路板用經質量評定的間 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation disp |
| DIN EN 60603-14-1999 |
印制電路板用頻率低于3MHz的連接器.第14部分:諸如音頻,視頻和視聽設備的低頻音頻和視頻設備用圓形連接器的 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment (IEC 60603-14:1998); German version |
| DIN EN 60603-2-1999 |
頻率低于3MHz的印制電路板用插接器.第2部分:具有共同安裝特性,網柵尺寸2,54mm(0,1in)的印制電路用經質量評 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995); Germ |
| DIN EN 60603-3-1998 |
頻率3MHZ以下印制電路用插接件.第3部分:帶有觸點間距為2,54mm(0,1in)和同樣間距下的錯位接點的印制電路用間 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (O,1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987); German version EN 6 |
| DIN EN 60603-4-1998 |
頻率3MHZ以下印制電路用插接件.第4部分:帶有觸點間距為1,91mm(0,075in)和同樣間距下的錯位接點的印制電路用 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987); German version EN |
| DIN EN 60603-5-1998 |
頻率3MHZ以下印制電路用插接件.第5部分:帶有觸點間距為2,54mm(0,1in)的雙面涂層印制電路板用直接插接件和間 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987); German version EN 60603-5:1998) |
| DIN EN 60603-6-1998 |
頻率3MHZ以下印制電路用插接件.第6部分:額定厚度為1,6mm(0,063in)單面或雙面涂層的印制電路板上2,54mm(0,1i |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 6 |
| DIN EN 60603-7-1-2002 |
電子設備用連接器.第7-1部分:有質量評定的具有通用插合特性的屏蔽式自由和固定連接器的8位連接器詳細規范 |
(Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality (IEC 60603-7-1:2002); German version EN 60603-7-1:2002) |
| DIN EN 60603-7-1997 |
印制板用頻率低于3MHz的插塞連接器.第7部分:包括具有一般插塞特性的固定和活動連接器的8極插塞連接器的詳細 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality (IEC 60603-7:1996); German version EN 60603-7: |
| DIN EN 60603-7-4-2005 |
電子設備連接器.第7-4部分:數據傳輸頻率250 MHz及以下的無屏蔽、活動和固定式8路連接器的詳細規范(IEC 60603-7-1-2002)；德文版本 EN 60603-7-1-2002 |
|
| DIN EN 60603-7-7-2003 |
電子設備用連接器.第7-7部分:最大頻率為600MHz的(7類屏蔽)數據傳輸用8路屏蔽的固定和自由連接器的詳細規范 |
(Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded) (IEC 60603-7-7:2002); German version EN 60603-7-7:2002) |
| DIN EN 60603-8-1998 |
頻率3MHZ以下印制電路用插接件.第8部分:人員觸點截面0,63mm×0,63mm;網柵尺寸2,54mm(0,1in);印制電路用間接 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm0,63 mm (IEC 60603-8:1990); German version EN 60603-8:1998) |
| DIN EN 60603-9-1998 |
頻率3MHZ以下印制電路用插接件.第9部分:網柵尺寸2,54mm(0,1in),后面板和電纜連接點,印制電路用間接插接件 |
(Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990); German version EN 60603-9:1998) |
| DIN EN 60613-1992 |
醫療診斷用旋轉陽極X射線管的電,熱和負載特性值 |
(Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis (IEC 60613:1989); german version EN 60613:1990) |
| DIN EN 60617-10-1997 |
線路圖用圖形符號.第10部分:電信用線路圖.發射設備 |
(Graphical symbols for diagrams - Part 10: Telecommunications; transmission (IEC 60617-10:1996); German version EN 60617-10:1996) |
| DIN EN 60617-11-1997 |
線路圖用圖形符號.第11部分:建筑物與地形測量的安裝平面圖和線路圖 |
(Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams (IEC 60617-11:1996); German version EN 60617-11:1996) |
| DIN EN 60617-12 Bb.1-1998 |
符合IEC60617-12和IEC60617-13的電器線路符號的應用 |
(Application of IEC 60617-12 and IEC 60617-13 standards (IEC 61734:1997)) |
| DIN EN 60617-12-1999 |
電路圖的圖形符號.第12部分:二進制邏輯件 |
(Graphical symbols for diagrams - Part 12: Binary logic elements (IEC 60617-12:1997); German version EN 60617-12:1998) |
| DIN EN 60617-13-1994 |
線路圖用圖形符號.第13部分:模擬件 |
(Graphical symbols for diagrams; part 13: analogue elements (IEC 60617-13:1993); German version EN 60617-13:1993) |
| DIN EN 60617-2-1997 |
簡圖用圖形符號.第2部分:常用符號要素,標識和其它線路標記 |
(Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application (IEC 60617-2:1996); German version EN 60617-2:1996) |
| DIN EN 60617-3-1997 |
線路圖用圖形符號.第3部分:導線和連接器件用線路標記 |
(Graphical symbols for diagrams - Part 3: Conductors and connecting devices (IEC 60617-3:1996); German version EN 60617-3:1996) |
| DIN EN 60617-4-1997 |
線路圖用圖形符號.第4部分:基本的無源件 |
(Graphical symbols for diagrams - Part 4: Basic passive components (IEC 60617-4:1996); German version EN 60617-4:1996) |
| DIN EN 60617-5-1997 |
線路圖用圖形符號.第5部分:半導體和電子管用線路標記 |
(Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes (IEC 60617-5:1996); German version EN 60617-5:1996) |
| DIN EN 60617-6-1997 |
線路圖用圖形符號.第6部分:電能的發生和轉換用線路標記 |
(Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy (IEC 60617-6:1996); German version EN 60617-6:1996) |
| DIN EN 60617-7-1997 |
線路圖用圖形符號.第7部分:開關設備和保護裝置用線路標記 |
(Graphical symbols for diagrams - Part 7: Switchgear, controlgear and protective devices (IEC 60617-7:1996); German version EN 60617-7:1996) |
| DIN EN 60617-8-1997 |
線路圖用圖形符號.第8部分:測量儀器,燈和信號裝置用線路標記 |
(Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996); German version EN 60617-8:1996) |
| DIN EN 60617-9-1997 |
線路圖用圖形符號.第9部分:電信用線路圖.中繼設備和終端設備 |
(Graphical symbols for diagrams - Part 9: Telecommunications; switching and peripheral equipment (IEC 60617-9:1996); German version EN 60617-9:1996) |
| DIN EN 60618-1999 |
感應電壓分壓器 |
(Inductive voltage dividers (IEC 60618:1978 + A1:1981 + A2:1997); Version allemande EN 60618:1997 + A2:1997) |
| DIN EN 60619-1994 |
食品制備電動器具.性能測量方法 |
(Electrically operated food preparation appliances - Methods for measuring the performance (IEC 60619:1993 + Corrigendum: 1993); German version EN 60619:1993 + Corrigendum:1993) |
| DIN EN 60619/A1-1996 |
電動食品加工器具.使用性能測定的測試方法 |
(Electrically operated food preparation appliances - Methods for measuring the performance (IEC 60619:1993/A1:1995); German version EN 60619:1993/A1:1995) |
| DIN EN 60622-2003 |
含堿性或其它非酸性電解液的二次電池和蓄電池.可再充電的氣密式棱柱形鎳-鎘單體電池 |
(Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells (IEC 60622:2002); German version EN 60622:2003) |
| DIN EN 60623-2002 |
蓄電池和含堿性或其它無酸電解質的電池組.封閉式可再充電的棱形鎳-鎘單體電池 |
(Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells (IEC 60623:2001); German version EN 60623:2001) |
| DIN EN 60626 Bb.1-2000 |
電氣絕緣用復合柔性材料.類型比較.相關標準目錄 |
(Combined flexible materials for electrical insulation - Comparison of types - List of relevant standards (status as of 2000 March)) |
| DIN EN 60626-2-1997 |
電氣絕緣用復合柔性材料.第2部分:試驗方法 |
(Combined flexible materials for electrical insulation - Part 2: Methods of test (IEC 60626-2:1995); German version prEN 60626-2:1995) |
| DIN EN 60626-3-2000 |
電氣絕緣用復合柔性材料.第3部分:單個材料規范 |
(Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials (IEC 60626-3:1996 + Corrigendum:1999-03 + A1:1999); German version EN 60626-3:1996 + Corrigendum:1999-03 + A1:1999) |
| DIN EN 60630-2000 |
白熾燈的最大燈泡外形圖 |
(Maximum lamp outlines for incandescent lamps (IEC 60630:1994 + A1:1997 + A2:1998, modified + A3:1999); German version EN 60630:1998 + A3:1999) |
| DIN EN 60630-2005 |
白熾燈最大外形尺寸 |
|
| DIN EN 60633-2000 |
高壓直流(HVDC)傳輸術語 |
(Terminology for high-voltage direct current (HVDC) transmission (IEC 60633:1998): German version EN 60633:1999) |
| DIN EN 60634-1996 |
燈具耐熱試驗用熱試驗源(H.T.S)燈 |
(Heat test source (HTS) lamps for carrying out heating tests on luminaires (IEC 60634:1993); German version EN 60634:1995) |
| DIN EN 60641-1-1996 |
電工用壓紙板和厚紙板規范.第1部分:定義和一般要求 |
(Specification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements (IEC 60641-1:1979 + A1:1993); German version EN 60641-1:1995) |
| DIN EN 60641-2-1996 |
電工用壓紙板和厚紙板規范.第2部分:試驗方法 |
(Specification for pressboard and presspaper for electrical purposes - Part 2: Methods of test (IEC 60641-2:1979 + Corrigendum 1994 + A1:1993); German version EN 60641-2:1995) |
| DIN EN 60641-3-1 Bb.1-2004 |
電工用壓紙板和薄紙板規范.第3部分:單項材料規范.活頁1:B.0.1、B.2.1、B.2.3、B.3.1、B.3.3、B.4.1、B.4.3、B.5.1、B.6.1和B.7.1型壓紙板的要求 |
|
| DIN EN 60641-3-1-1996 |
電工用壓紙板和厚紙板規范.第3部分:個別材料規范.第1活頁:B.01、B.2.1、B.2.3、B.3.1、B.3.3、B.4.1、B.4.3 |
(Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials; sheet 1: Requirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 (IEC 60641-3-1:1992 |
| DIN EN 60641-3-2 Bb.1-2004 |
電工用壓紙板和薄紙板規范.第3部分:單項材料規范.活頁2:P.2.1、P.4.1、P.4.2、P.4.3、P.6.1和P.7.1型薄紙板的要求 |
|
| DIN EN 60641-3-2-1996 |
電工用壓紙板和厚紙板規范.第3部分:個別材料規范.第2活頁:P.2.1、P.4.1、P.4.2、P.4.3、P.6.1和P.7.1型厚紙 |
(Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials; sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1 (IEC 60641-3-2:1992); German version EN 60641-3 |
| DIN EN 60644-1997 |
電動機電路用高壓熔斷器熔絲的要求 |
(Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:1979); German version EN 60644:1993) |
| DIN EN 60645-1-2002 |
電聲學.聲學設備.第1部分:純音測聽計 |
(Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers (IEC 60645-1:2001); German version EN 60645-1:2001) |
| DIN EN 60645-2-1997 |
測聽計.第2部分:語言測聽裝置 |
(Audiometers - Part 2: Equipment for speech audiometry (IEC 60645-2:1993); German version EN 60645-2:1997) |
| DIN EN 60645-3-1995 |
聽力計.第3部分:聲學和耳神經學用短持續試驗信號 |
(Audiometers - Part 3: Auditory test signals of short duration for audiometric and neuro-otological purposes (IEC 60645-3:1994); German version EN 60645-3:1995) |
| DIN EN 60645-4-1995 |
聽力計.第4部分:高頻聲學設備 |
(Audiometers - Part 4: Equipment for extended high-frequency audiometry (IEC 60645-4:1994); German version EN 60645-4:1995) |
| DIN EN 60646-1998 |
坩堝感應爐的試驗方法 |
(Test methods for crucible induction furnaces (IEC 60646:1992); German version EN 60646:1998) |
| DIN EN 60651-1994 |
聲級計 |
(Sound level meters (IEC 60651:1979 + A1:1993); German version EN 60651:1994 + A1:1994) |
| DIN EN 60652-2004 |
架空線路結構的負載試驗 |
|
| DIN EN 60654-1-1994 |
工業過程測量和控制設備.第1部分:氣候條件 |
(Industrial-process measurement and control equipment; operating conditions; part 1: climatic conditions (IEC 60654-1:1993); German version EN 60654-1:1993) |
| DIN EN 60654-2-1998 |
工藝技術中測量,控制和調節設備的操作條件.第2部分:動力 |
(Operating conditions for industrial-process measurement and control equipment - Part 2: Power (IEC 60654-2:1979 + A1:1992); German version EN 60654-2:1997) |
| DIN EN 60654-3-1998 |
工藝技術中測量,控制和調節設備的操作條件.第3部分:機械影響 |
(Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences (IEC 60654-3:1983); German version EN 60654-3:1997) |
| DIN EN 60654-4-1998 |
工藝技術中測量,控制和調節設備的操作條件.第4部分:腐蝕和侵蝕影響 |
(Operating conditions for industrial-process measurement and control equipment - Part 4: Corrosive and erosive influences (IEC 60654-4:1987); German version EN 60654-4:1997) |
| DIN EN 60660-2000 |
絕緣子.標稱電壓大于1KV小于300KV(不含)的系統用有機材料戶內支柱絕緣子的試驗 |
(Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999); German version EN 60660:1999) |
| DIN EN 60661-2001 |
家用電咖啡壺性能的測量方法 |
(Methods for measuring the performance of electric household coffee makers (IEC 60661:1999); German version EN 60661:2001) |
| DIN EN 60662-1995 |
高壓鈉蒸汽燈 |
(High-pressure sodium vapour lamps (IEC 60662:1980 and Amendment 1:1986, Amendment 2:1987, Amendment 3:1990, Amendment 4:1992 and Amendment 5:1993, modified); German version EN 60662:1993 + A4:1994 + A5:1994) |
| DIN EN 60662/A10-1998 |
高壓鈉蒸氣燈.更改A10 |
(High-pressure sodium vapour lamps; Amendment A10 (IEC 60662:1980/A10:1997); German version EN 60662:1993/A10:1997) |
| DIN EN 60662/A6-1995 |
高壓鈉蒸汽燈 |
(High-pressure sodium vapour lamps (IEC 60662:1980/A6:1994); German version EN 60662:1993/A6:1994) |
| DIN EN 60662/A7-1996 |
高壓鈉蒸氣燈 |
(High-pressure sodium vapour lamps (IEC 60662:1980/A7:1995); German version EN 60662:1993/A7:1995) |
| DIN EN 60662/A9-1998 |
高壓鈉蒸氣燈.修改件9 |
(High-pressure sodium vapour lamps; Amendment 9 (IEC 60662:1980/A9:1997); German version EN 60662:1993/A9:1997) |
| DIN EN 60664-3-2003 |
低壓系統內設備的絕緣配合.第3部分:防污染用涂層、灌封或模壓的使用 |
(Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2003); German version EN 60664-3:2003) |
| DIN EN 60664-5-2004 |
低壓系統內設備的絕緣配合.第5部分:測定電氣間隙和爬電距離等于或小于2mm的綜合方法 |
|
| DIN EN 60669-1-2003 |
家用和類似用途的固定電氣設施用開關.第1部分:一般要求 |
(Switches for household and similar fixed electrical installations - Part 1: General requirements (IEC 60669-1:1998, modified + A1:1999, modified); German version EN 60669-1:1999 + A1:2002) |
| DIN EN 60669-2-1 Bb.1-2004 |
家用和類似用途固定電氣裝置的開關.第2-1部分:特殊要求.電子開關.補充件1:解釋活頁1 |
|
| DIN EN 60669-2-1-2002 |
家用和類似的固定電氣設施用開關.第2-1部分:特殊要求.電子開關 |
(Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements; Electronic switches (IEC 60669-2-1:1996, modified + A1:1997, modified + A2:1999, modified); German version EN 60669-2-1:2000 + A2:2001) |
| DIN EN 60669-2-2-1997 |
家用和類似固定電氣裝置用開關.第2部分:特殊要求.第2節:遙控開關 |
(Switches for household and similar fixed-electrical installations - Part 2: Particular requirements; Section 2: Electromagnetic remote-control switches (R.C.S.) (IEC 60669-2-2:1996); German version EN 60669-2-2:1996) |
| DIN EN 60669-2-2/A1-1998 |
家用和類似固定電氣裝置用開關.第2部分:特殊要求.第2節:遙控開關.更改A1 |
(Switches for household and similar fixed-electrical installations - Part 2: Particular requirements; Section 2: Electromagnetic remote-control switches (RCS); Amendment A1 (IEC 60669-2-2:1996/A1:1997); German version EN 60669-2-2:1997/A1:1997) |
| DIN EN 60669-2-3-1998 |
家用和類似固定電氣裝置用開關.第2部分:特殊要求.延時開關 |
(Switches for household and similar fixed-electrical installations - Part 2: Particular requirements; time-delay switches (TDS) (IEC 60669-2-3:1997); German version EN 60669-2-3:1997) |
| DIN EN 60669-2-4-2005 |
家用和類似用途固定電氣設施用開關.第2-4部分:特殊要求.隔離開關 |
|
| DIN EN 60672-1-1996 |
陶瓷和玻璃絕緣材料-第1部分:定義和分類 |
(Ceramic and glass insulating materials - Part 1: Definitions and classification (IEC 60672-1:1995); German version EN 60672-1:1995) |
| DIN EN 60672-2-2000 |
陶瓷和玻璃絕緣材料-第2部分:試驗方法 |
(Ceramic and glass insulating materials - Part 2: Methods of test (IEC 60672-2:1999); German version EN 60672-2:2000) |
| DIN EN 60672-3-1999 |
陶瓷和玻璃絕緣材料.第3部分:單項材料規范 |
(Ceramic and glass-insulating materials - Part 3: Specifications for individual materials (IEC 60672-3:1997); German version EN 60672-3:1997) |
| DIN EN 60674 Bb.1-1999 |
電器用塑料薄膜.型號對比的相關標準目錄(1999版) |
(Plastic films for electrical purposes - List of relevant standards, comparison of types (status of 1999)) |
| DIN EN 60674-1-1999 |
電工用塑料薄膜的規范.第1部分:定義和一般要求 |
(Specification for plastic films for electrical purposes - Part 1: Definitions and general requirements (IEC 60674-1:1980); German version EN 60674-1:1998) |
| DIN EN 60674-2-2002 |
電工用塑料薄膜規范.第2部分:檢驗方法 |
(Specification for plastic films for electrical purposes - Part 2: Methods of test (IEC 60674-2:1988 + Corrigendum 1995 + A1:2001); German version EN 60674-2:1998 + A1:2001) |
| DIN EN 60674-3-1-1999 |
電工用塑料薄膜.第3部分:專用材料規范.第1活頁:電容器用雙向取向聚丙烯薄膜 |
(Plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998); German version EN 60674-3-1:1998) |
| DIN EN 60674-3-2-1999 |
電工用塑料薄膜規范.第3部分:專用材料規范.第2活頁:電絕緣用平衡雙軸取向聚對苯二甲酸乙二醇酯薄膜要求 |
(Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (IEC 60674-3-2:1992); G |
| DIN EN 60674-3-3-1999 |
電工用塑料薄膜規范.第3部分:專用材料規范.第3活頁:電絕緣用聚碳酸酯薄膜要求 |
(Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992); German version EN 60674-3-3:1998) |
| DIN EN 60674-3-4 bis 6-1999 |
電工用塑料薄膜規范.第3部分:專用材料規范.第4-6活頁:電絕緣用聚酰亞胺薄膜要求 |
(Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheets 4 to 6: Requirements for polyimide films used for electrical insulation (IEC 60674-3-4 to 6:1993); German version EN 60674-3-4 bis 6:1995) |
| DIN EN 60674-3-7-1999 |
電工用塑料薄膜規范.第3部分:專用材料規范.第7活頁:電絕緣用氟乙烯丙烯薄膜要求 |
(Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992); German version EN 60674-3-7:199 |
| DIN EN 60675-1996 |
家用直接式電暖器.測定使用性能的試驗方法 |
(Household electric direct-acting room heaters - Methods for measuring performance (IEC 60675:1994); German version EN 60675:1995) |
| DIN EN 60675/A1-1999 |
家用房間直接電加熱器.性能測量方法.第1次修訂 |
(Household electric direct-acting room heaters - Methods for measuring performance (IEC 60675:1994/A1:1998); German version EN 60675:1995/A1:1998) |
| DIN EN 60676-2003 |
工業電加熱設備.直接電弧爐的試驗方法 |
(Industrial electroheating equipment - Test methods for direct arc furnaces (IEC 60676:2002); German version EN 60676:2002) |
| DIN EN 60679-1-2002 |
已質量評定的石英晶體受控振蕩器.第1部分:總規范 |
(Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification (IEC 60679-1:1997 + A1:2002); German version EN 60679-1:1998 + A1:2002) |
| DIN EN 60679-1-2004 |
經質量評定的石英晶體振蕩器.第1部分:總規范 |
|
| DIN EN 60679-3-2002 |
經質量評定的石英晶體受控振蕩器.第3部分:標準外形和引線連接 |
(Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections (IEC 60679-3:2001); German version EN 60679-3:2001) |
| DIN EN 60679-4-1-1998 |
已質量評定的石英晶體受控振蕩器.第4-1部分:空白詳細規范.能力鑒定 |
(Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification; capability approval (IEC 60679-4-1:1998); German version EN 60679-4-1:1998) |
| DIN EN 60679-4-1998 |
經質量評定的石英晶體受控振蕩器.第4部分:分規范.合格認證 |
(Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional specification - Capability approval (IEC 60679-4:1997); German version EN 60679-4:1998) |
| DIN EN 60679-5-1-1999 |
經過質量評定的石英晶體受控振蕩器.第5-1部分:空白詳細規范.合格鑒定 |
(Quartz crystal controlled oscillators of assessed quality - Part 5-1: Blank detail specification; qualification approval (IEC 60679-5-1:1998); German version EN 60679-5-1:1998) |
| DIN EN 60679-5-1999 |
經過質量評定的石英晶體受控振蕩器.第5部分:分規范.合格鑒定 |
(Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification; qualification approval (IEC 60679-5:1998); German version EN 60679-5:1998) |
| DIN EN 60682-1994 |
測量石英鹵鎢燈夾封部溫度的標準方法 |
(Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993) |
| DIN EN 60682/A2-1997 |
測量石英玻璃燈擠壓溫度的方法.修改件2 |
(Method of measuring the pinch temperature of quartz glass lamps; Amendment A2 (IEC 60682:1980/A2:1997); German version EN 60682:1993/A2:1997) |
| DIN EN 60684 Bb.1-1996 |
絕緣軟管規范.相關標準目錄(1995年9月狀態) |
(Specification for flexible insulating sleeving - List of relevant standards (status as of 1995-09)) |
| DIN EN 60684-1-2004 |
絕緣軟套管規范.第1部分:定義和一般要求 |
(Flexible Insulating sleeving - Part 1: Definitions and general requirements (IEC 60684-1:2003); German version EN 60684-1:2003) |
| DIN EN 60684-1-2004 |
絕緣軟套管規范.第1部分:定義和一般要求 |
|
| DIN EN 60684-2-1999 |
絕緣軟管.第2部分:檢驗方法 |
(Flexible insulating sleeving - Part 2: Methods of test (IEC 60684-2:1997); German version EN 60684-2:1997) |
| DIN EN 60684-2-2004 |
絕緣軟套管.第2部分:試驗方法 |
|
| DIN EN 60684-3-100 bis 105-2002 |
絕緣軟套管.第3部分:各種型號套管的規范.第100至105活頁:擠制聚氯乙烯(PVC)套管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001); German version EN 60684-3-100 to 105:2001) |
| DIN EN 60684-3-116 bis 117-2004 |
絕緣軟套管.第3部分:各種型號套管的要求規范.第116至117活頁:通用擠壓氯丁套管 |
(Flexible Insulating Sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 116 to 117: Extruded polychloroprene, general purpose (IEC 60684-3-116 bis 117:2003); German version EN 60684-3-116 bis 117:2003) |
| DIN EN 60684-3-116 bis 117-2004 |
絕緣軟套管.第3部分:各種型號套管的要求規范.第116至117活頁:通用擠壓氯丁套管 |
|
| DIN EN 60684-3-121 bis 124-2002 |
絕緣軟套管.第3部分:各種型號套管的規范.第121和124活頁:擠制硅橡膠套管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 121 to 124: Extruded silicone sleeving (IEC 60684-3-121 to 124:2001); German version EN 60684-3-121 to 124:2001) |
| DIN EN 60684-3-123 und 124-1996 |
絕緣軟管規范.第3部分:各種型號套管的規范要求.第123和124活頁:標準型擠壓硅軟管 |
(Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving; Sheets 123 and 124: Extruded silicone sleeving, general purpose (IEC 60684-3-123 and 124:1992); German version EN 60684-3-123 and 124:19 |
| DIN EN 60684-3-136-1999 |
絕緣軟套管.第3部分:各種型號套管的規范.第136活頁:擠壓氟硅酮套管.一般用途 |
(Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose (IEC 60684-3-136:1997); German version EN 60684-3-136:1998) |
| DIN EN 60684-3-145 bis 147-2002 |
絕緣軟套管.第3部分:各種型號套管的規范.第145和147活頁:擠制聚四氟乙烯套管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001); German version EN 60684-3-145 to 147:2001) |
| DIN EN 60684-3-151-1999 |
絕緣軟管.第3部分:各個軟管類型的要求.第151頁:擠壓成型的聚氯乙烯/腈橡膠軟管.一般應用 |
(Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998) |
| DIN EN 60684-3-209-2004 |
絕緣軟套管.第3部分:各種型號套管的規范.活頁209:收縮比2:1的通用阻燃聚烯烴熱收縮套管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1 (IEC 60684-3-209:2003); German version EN 60684-3-209:2003) |
| DIN EN 60684-3-209-2004 |
絕緣軟套管.第3部分:各種型號套管的規范.活頁209:收縮比2:1的通用阻燃聚烯烴熱收縮套管 |
|
| DIN EN 60684-3-211-2003 |
絕緣軟套管.第3部分:各種型號套管的規范.活頁211:通用半硬式熱縮聚烯烴套管,收縮率2:1 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 211: Heat-shrinkable sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-211:2002); German version EN 60684-3-211:2002) |
| DIN EN 60684-3-212-1999 |
絕緣軟套管.第3部分:各種型號套管的規范.第212活頁:收縮比為2:1的阻燃聚烯烴熱縮套管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 212: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 2:1 (IEC 60684-3-212:1998); German version EN 60684-3-212:1998) |
| DIN EN 60684-3-213-1999 |
絕緣軟管.第3部分:各個軟管類型的要求.第213頁:易燃的收縮比為2:1的熱收縮聚烯烴軟管 |
(Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving; Sheet 213: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 (IEC 60684-3-213:1998); German version EN 60684-3-213:1999) |
| DIN EN 60684-3-217-1999 |
絕緣軟管.第3部分:各個軟管類型的要求.第217頁:不易燃的收縮比為3:1的熱收縮聚烯烴軟管 |
(Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving; Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1 (IEC 60684-3-217:1998); German version EN 60684-3-217:1998) |
| DIN EN 60684-3-218-1999 |
絕緣軟管.第3部分:各個軟管類型的要求.第218頁:易燃的收縮比為3:1的熱收縮聚烯烴軟管 |
(Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving; Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1 (IEC 60684-3-218:1998); German version EN 60684-3-218:1998) |
| DIN EN 60684-3-228-1999 |
絕緣軟管.第3部分:各個軟管類型的要求.第228頁:半固定,耐火,防潮,收縮比2:1的熱收縮聚乙烯氟軟管 |
(Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving; Sheet 228: Heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:1998); German v |
| DIN EN 60684-3-229-2004 |
絕緣軟套管.第3部分:各種型號套管的規范要求.活頁229:收縮比2:1的半撓性阻燃抗液體聚偏氟乙烯熱收縮套管 |
(Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-229:2003); German version) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com