標準號 |
中文名稱 |
英文名稱 |
| prEN 14316-2-2002 |
建筑物熱絕緣產品 現場制膨脹珍珠巖熱絕緣產品 第2部分：安裝產品規范 |
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products |
| prEN 14317-1-2002 |
建筑物熱絕緣產品 現場制鱗狀蛭石熱絕緣產品 第1部分：安裝前粘合的及松散填充的產品規范 |
Thermal insulating products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| prEN 14317-2-2002 |
建筑物熱絕緣產品 現場制鱗狀蛭石熱絕緣產品 第2部分： 安裝產品規范 |
Thermal insulating products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products |
| prEN 14318-1-2002 |
建筑物用熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第1部分：安裝前硬質聚氨基甲酸乙酯制作系統規 |
Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane foam (PUR) products - Part 1: Specification for the rigid polyurethane dispense system before installation |
| prEN 14318-2-2002 |
建筑物用熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第2部分：安裝絕緣產品規范 |
Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane foam (PUR) products - Part 2: Specification for the installed insulation products |
| prEN 14319-1-2002 |
工業裝置和建筑設備用熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第1部分：安裝前的硬質泡沫制作 |
Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane foam (PUR) products - Part 1: Specification for the rigid foam dispensed system before installation |
| prEN 14319-2-2002 |
工業裝置和建筑設備用熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第2部分：安裝絕緣產品規范 |
Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane foam (PUR) products - Part 2: Specification for the installed insulation products |
| prEN 14320-1-2002 |
工業裝置和建筑設備用熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第1部分：安裝前的硬質泡沫噴射 |
Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane foam (PUR) products - Part 1: Specification for the rigid foam spray system before installation |
| prEN 14320-2-2002 |
工業裝置和建筑設備用熱絕緣產品 現場噴制硬質聚氨基甲酸乙酯泡沫產品 第2部分：安裝產品規范 |
Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane foam (PUR) products - Part 2: Specification for the installed products |
| prEN 14321-1-2001 |
建筑玻璃 熱固性堿土硅酸鹽安全玻璃 種類和定義 |
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description |
| prEN 14321-2-2001 |
建筑玻璃 熱固性堿土硅酸鹽安全玻璃 評定標準 |
Glass in building - Thermally alkaline earth silicate safety glass - Part 2: Evaluation of conformity |
| prEN 14322-2001 |
木制面板 室內用三聚氰胺面板 分類、定義和要求 |
Wood-based panels - Melamine faced boards for interior uses - Definitions, requirements and classification |
| prEN 14323-2001 |
木制面板 室內用三聚氰胺面板 試驗方法和特性 |
Wood-based panels - Melamine faced boards for interior uses - Characteristics and test methods |
| prEN 14324-2001 |
銅焊 銅焊連接應用的指南 |
Brazing - Guidance on the application of brazed joints |
| prEN 14325-2003 |
防化學防護服 化學防護服面料 縫、縫接和制作性能分級和試驗方法 |
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
| prEN 14326-2003 |
皮革 機械和物理試驗 耐水平火焰燃燒蔓延的測定 |
Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
| prEN 14327-2003 |
皮革 機械和物理試驗 家具革耐磨性的測定 |
Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
| prEN 14328-2001 |
防護服 電動刀的裁剪防護用手套和護手 試驗方法和要求 |
Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods |
| prEN 14329-2001 |
內河船 裝載區域和鋪位的裝置 |
Inland navigation vessels - Installation of berths and loading areas |
| prEN 14330-2003 |
內河船 無橫檔錨鏈 圓鋼環鏈 |
Inland navigation vessels - Studless anchor chain - Round steel link chain |
| prEN 14331-2003 |
液化石油產品用液相/氣相色譜法對脂肪酸甲基酯進行分離和描述 |
Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle destillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method |
| prEN 14332-2001 |
食品 微量原素的測定 微波浸煮后用ETAAS法測定海產品中砷 |
Foodstuffs - Determination of trace elements - Determination of arsenic in seafood by ETAAS after microwave digestion |
| prEN 14333-1-2001 |
非油脂食品 苯菌靈（多菌靈）、涕必靈、多菌靈、苯并咪唑殺真菌劑的測定 第1部分：用固相提純的HPLC法 |
Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 1: HPLC method withC solid phase extraction clean up |
| prEN 14333-2-2001 |
非油脂食品 苯菌靈（多菌靈）、涕必靈、多菌靈、苯并咪唑殺真菌劑的測定 第2部分 用 凝膠滲透色譜法提純 |
Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 2: HPLC method with gel permeation chromatography clean up |
| prEN 14333-3-2001 |
非油脂食品 苯菌靈（多菌靈）、涕必靈、多菌靈、苯并咪唑殺真菌劑的測定 第3部分： 用液體/液體分配提純 |
Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 3: HPLC method with liquid/liquid-partition clean up |
| prEN 14334-2003 |
液化石油氣公路運輸罐的檢查和試驗 |
Inspection and testing of LPG road tankers |
| prEN 14335-2001 |
建筑物熱力系統 系統效能和系統能量要求的計算方法 |
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies |
| prEN 14336-2001 |
建筑物熱力系統 整體系統的安裝及運行 |
Heating systems in buildings - Installation and commissioning of the whole system |
| prEN 14337-2001 |
建筑物熱力系統 直接的室內電供熱系統的安裝和設計 |
Heating systems in buildings - Design and installation of direct electrical room heating systems |
| prEN 14338-2003 |
與食物接觸的紙和紙板 用改進聚苯氧（泰納克斯）測定紙和紙板中物質遷移的條件（作為一種模擬） |
Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant |
| prEN 14339-2001 |
地下消防栓 表面箱和蓋子 |
Underground fire hydrants, surface boxes and covers |
| prEN 14340-2003 |
皮革 機械和物理試驗 衣服革防水性的測定 |
Leather - Physical and mechanical tests - Determination of water repellency of garment leather |
| prEN 14341-2001 |
工業閥 鋼防逆閥 |
Industrial valves - Steel check valves |
| prEN 14342-2001 |
木地板 特性 合格性評定和標志 |
Wood flooring - Characteristics, evaluation of conformity and marking |
| prEN 14343-2003 |
容積泵 驗收性能試驗 |
Rotary positive displacement pumps - Performance tests for acceptance |
| prEN 14344-2001 |
兒童用品 童車座椅 試驗方法和安全要求 |
Child care articles - Child seats for cycles - Safety requirements and test methods |
| prEN 14345-2001 |
廢物的特性 用重力分析法測定碳?xì)浠衔锖?/td>
| Characterization of waste - Determination of hydrocarbon content by gravimetry |
| prEN 14346-2001 |
廢物的特性 用測定水含量或干燥殘留量來計算干物質 |
Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| prEN 14347-2001 |
化學消毒劑 基本殺孢子能力 要求和試驗方法（相1） |
Chemical disinfectants - Basic sporicidal activity - Test method and requirements (phase 1) |
| prEN 14348-2001 |
化學防腐劑和消毒劑 醫用領域用化學消毒劑（包括儀器消毒劑）殺分枝菌能力評價作用定量懸浮試驗 試驗方法 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2/step 1) |
| prEN 14349-2003 |
在無機械作用非多孔表面獸醫化學消素劑和防腐劑殺菌能力評價用定量表面試驗 試驗方法及要求 |
Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action - Test method and requirements |
| prEN 14350-1-2001 |
兒童用品 飲水設備 第1部分：機械要求、總的要求及試驗 |
Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests |
| prEN 14350-2-2001 |
兒童用品 飲水設備 第2部分：試驗和化學要求 |
Child use and care articles - Drinking equipment - Part 2: Chemical requirements and tests |
| prEN 14351-2001 |
外走廊門和窗 產品標準 |
Windows and external pedestrian doors - Product standard |
| prEN 14352-2001 |
食品 玉米制食品中測定FUMONISINS B1和B2 用免疫親合柱提純的HPLC法 |
Foodstuffs - Determination of fumonisins B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean-up |
| prEN 14353-2001 |
石膏壁板用的金屬墊圈和特殊部件 試驗方法、定義和要求 |
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| prEN 14354-2001 |
木制地板 鋪地膠合板 |
Wood-based panels - Wood veneer floor covering |
| prEN 14358-2002 |
結構用木材 5%特征值的計算 |
Structural timber - Calculation of characteristic 5-percentile value |
| prEN 14359-2002 |
液壓動力設備的氣壓蓄能器 |
Gas-loaded accumulators for fluid power applications |
| prEN 14360-2002 |
惡劣氣候防護服 成衣防雨淋試驗方法 高能量水滴對成衣外表的影響 |
Protective clothing against foul weather - Test method for the rain tightness of a ready made garment - Impact from above with high energy droplets |
| prEN 14361-2001 |
鋁及鋁合金 化學分析 金屬熔化取樣 |
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| prEN 14364-2002 |
有或無壓排水和排污塑料管線系統 玻璃纖維增強的未飽和的聚酯樹脂基熱固塑料管 塑料管管件及接頭規范 |
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| prEN 14366-2002 |
廢水裝置噪聲的實驗室的測量 |
Laboratory measurement of noise from waste water installations |
| prEN 14367-2002 |
不同的不可控壓力區域用的回流防止器 C族A型 |
Backflow preventer with different non controllable pressure zones - Family C, Type A |
| prEN 14368-2003 |
人類生活用水的處理用產品 二氧化錳涂覆石灰石 |
Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone |
| prEN 14369-2003 |
人類生活用水的處理用產品 鐵涂覆活性顆粒氧化鋁 |
Products used for treatment of water intended for human consumption - Iron coated granular activated alumina |
| prEN 14370-2002 |
表面活性劑 表面張力的測定 |
Surface active agents - Determination of surface tension |
| prEN 14371-2002 |
表面活性劑 起泡程度和起泡能力的測定 循環試驗方法 |
Surface active agents - Determination of foamability and degree of foamability - Circulation test method |
| prEN 14372-2002 |
兒童用品 餐具和喂食器具 試驗和安全要求 |
Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests |
| prEN 14373-2002 |
爆炸抑制系統 |
Explosion suppression systems |
| prEN 14374-2002 |
木結構 結構層壓膠合板 要求 |
Timber structures - Structural laminated veneer timber - Requirements |
| prEN 14375-2003 |
醫藥產品防止兒童打開的包裝 試驗和要求 |
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
| prEN 14384-2002 |
柱式消防栓 |
Pillar fire hydrants |
| prEN 14385-2003 |
空氣質量 固定源排放 特殊物總排放量的測定 |
Air quality - Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Ti and V |
| prEN 14386-2002 |
機械安全 移動機械可操作性的人類工效學設計原則 |
Safety of machinery - Ergonomic design principles for the operability of mobile machinery |
| prEN 14387-2003 |
呼吸保護裝置 氣體過濾器和組合過濾器 要求、試驗和標志 |
Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking / Note: Intended as replacement for EN 141 (2000-02), EN 371 (1992-03), EN 372 (1992-03). |
| prEN 14388-2002 |
道路交通降噪設備 規范 |
Road traffic noise reducing devices - Specifications |
| prEN 14389-2-2002 |
道路交通降噪設備 長期性能評定程序 第2部分：非聲學特性 |
Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| prEN 14390-2002 |
著火試驗 表面產品的實際場所試驗 |
Fire tests - Full scale room test for surface products |
| prEN 14391-2002 |
包裝 可活動鋁管 危險感覺警告 |
Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
| prEN 14392-2003 |
鋁及鋁合金 與食物接觸的陽極處理產品的特殊要求 |
Aluminium and aluminium alloys - Special requirements for anodised products for use in contact with food |
| prEN 14393-2002 |
水質 流動水中水生大型植物測量和分析的質量保證信息的指南 |
Water quality - Guidance on quality assurance aspects of aquatic macrophytes surveying and analysis in running waters |
| prEN 14395-1-2002 |
有機物質對人類生活用水的影響 水塔系統中水的感觀評估 第1部分：試驗方法 |
Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method |
| prEN 14396-2003 |
檢修孔固定梯 |
Fixed ladders for manholes |
| prEN 14397-2-2002 |
肥料和農用石灰處理細料 二氧化碳測定 第2部分：農用石灰處理細料的方法 |
Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials |
| prEN 14399-1-2002 |
預加載高強度結構螺栓 第1部分：一般要求 |
High-strength structural bolting for preloading - Part 1: General requirements |
| prEN 14399-2-2002 |
預加載高強度結構螺栓 第2部分：預加載適用性試驗 |
High-strength structural bolting for preloading - Part 2: Suitability test for preloading |
| prEN 14399-3-2002 |
預加載高強度結構螺栓 第3部分：HR系統 六角螺栓和螺母裝配件 |
High-strength structural bolting for preloading - Part 3: System HR; Hexagon bolt and nut assemblies |
| prEN 14399-4-2002 |
預加載高強度結構螺釘 第4部分：HV系統 六角螺栓和螺母的裝配件 |
High-strength structural bolting for preloading - Part 4: System HV; Hexagon bolt and nut assemblies |
| prEN 14399-5-2002 |
預加載高強度結構螺釘 第5部分：HR系統用普通平墊圈 |
High-strength structural bolting for preloading - Part 5: Plain washers for system HR |
| prEN 14399-6-2002 |
預加載高強度結構螺釘 第6部分HR和HV系統用普通斜角墊圈 |
High-strength structural bolting for preloading - Part 6: Plain chamfered washers for systems HR and HV |
| prEN 14401-2002 |
硬質塑料容器 封閉能力的試驗 |
Rigid plastics containers - Methods to the effectiveness of closures |
| prEN 14402-2002 |
可運輸可重復充裝的釬焊液化石油氣（LPG）鋼瓶 周期性重新檢驗 |
Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification |
| prEN 14403-2002 |
首飾和有關產品中貴金屬合金的取樣 |
Sampling of the precious metal alloys in jewellery and associated products |
| prEN 14404-2002 |
個人保護裝置 膝蓋部位工作膝蓋護套 |
Personal protective equipment - Knee protectors for work in the kneeling position |
| prEN 14405-2002 |
廢物的特性 過濾性能試驗 上涌過濾試驗 |
Characterisation of waste - Leaching behaviour test - Up-flow percolation test |
| prEN 14406-2002 |
混凝土結構修補和防護用產品和系統 試驗方法 膨脹脹大和膨脹率的測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution |
| prEN 14407-2002 |
水質 河底硅藻樣品的鑒別和計數的標準指南及其說明 |
Water quality - Guidance standard for the identification and enumeration of benthic diatom simples from rivers and their interpretation |
| prEN 14408-1-2002 |
地下供氣管網的改造用塑料管線系統 第1部分：總則 |
Plastics piping systems for the renovation of underground gas supply networks - Part 1: General |
| prEN 14408-3-2002 |
地下供氣管網的改造用塑料管線系統 第3部分：緊貼管子的襯套 |
Plastics piping systems for the renovation of underground gas supply networks - Part 3: Lining with close-fit-pipes |
| prEN 14409-1-2002 |
地下供氣管網的改造用塑料管線系統 第1部分：總則 |
Plastics piping systems for the renovation of underground water supply networks - Part 1: General |
| prEN 14409-3-2002 |
地下供水管網的改造用塑料管線系統 第3部分：緊貼管子的襯套 |
Plastics piping systems for the renovation of underground water supply networks - Part 3: Lining with close-fit-pipes |
| prEN 14411-2002 |
陶瓷磚 定義、分類、特性和標志 |
Ceramic tiles - Definitions, classification, characteristics and marking (ISO 13006:1998, modified) |
| prEN 14412-2002 |
室內空氣質量 氣體和蒸氣濃度的測定用擴散取樣器 選擇、使用和維護的指南 |
Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance |
| prEN 14413-1-2003 |
娛樂潛水服務 自帶潛水呼吸器的指導訓練的最低安全要求 第1部分：1級 |
Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1 |
| prEN 14413-2-2003 |
娛樂潛水服務 自帶潛水呼吸器的指導訓練的最低安全要求 第2部分：2級 |
Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2 |
| prEN 14414-2002 |
土工合成織物 測定垃圾掩埋應用的耐化學腐蝕用篩選試驗方法 |
Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
| prEN 14415-2002 |
土工合成織物隔離物 測定抗浸析作用的試驗方法 |
Geosynthetic barriers - Test method for determining the resistance to leaching |
| prEN 14416-2002 |
土工合成織物隔離物 測定抗草生長的試驗方法 |
Geosynthetic barriers - Test method for determining the resistance to roots |
| prEN 14417-2002 |
土工合成織物隔離物 干濕循環對粘土土工合成織物隔離物滲透性影響測定的試驗方法 |
Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cyles on the permeability of clay geosynthetic barriers |
| prEN 14418-2002 |
土工合成織物隔離物 凍融循環對粘土土工合成織物隔離物的滲透性影響測定的試驗方法 |
Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
| prEN 14419-2003 |
局部供熱管 直埋地下熱水管網的預保溫粘合管系統 監控系統 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems |
| prEN 14420-1-2002 |
帶夾具的軟管配件 第1部分：試驗和名稱、測量、要求 |
Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing |
| prEN 14420-10-2002 |
帶夾具的軟管配件 第10部分：凸輪鎖緊連接規格 |
Hose fittings with clamp units - Part 10: Gauges for cam-locking couplings |
| prEN 14420-11-2002 |
帶夾具的軟管配件 第11部分： 對稱半連接規格（圭勒明方法） |
Hose fittings with clamp units - Part 11: Gauges for symmetrical half couplings (Guillemin system) |
| prEN 14420-2-2002 |
帶夾具的軟管配件 第2部分：軟管支架的軟管附屬部分 尺寸和類型 |
Hose fittings with clamp units - Part 2: Hoses side parts of hose shank; Dimensions and types |
| prEN 14420-3-2002 |
帶夾具的軟管配件 第3部分：銷式或螺栓式夾具 |
Hose fittings with clamp units - Part 3: Clamp units, pinned or bolted |
| prEN 14420-4-2002 |
帶夾具的軟管配件 第4部分：法蘭連接 |
Hose fittings with clamp units - Part 4: Flange connections |
| prEN 14420-5-2002 |
帶夾具的軟管配件 第5部分：螺紋連接 |
Hose fittings with clamp units - Part 5: Threaded connections |
| prEN 14420-6-2002 |
帶夾具的軟管配件 第6部分：：TW罐式卡車連接 |
Hose fittings with clamp units - Part 6: TW tank truck couplings |
| prEN 14420-7-2002 |
帶夾具的軟管配件 第7部分：凸輪鎖緊 |
Hose fittings with clamp units - Part 7: Cam locking couplings |
| prEN 14420-8-2002 |
帶夾具的軟管配件 第8部分：對稱半連接（圭勒明方法） |
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| prEN 14420-9-2002 |
帶夾具的軟管配件 第9部分：TW罐式卡車連接規格 |
Hose fittings with clamp units - Part 9: Gauges for TW tank truck couplings |
| prEN 14421-2002 |
卷縮和彎曲的軟管口和金屬環 |
Hose tail and ferrule for crimping and swaging |
| prEN 14422-2002 |
液化石油氣軟管用夾具型連接組件 |
Clamp type coupling assemblies for LPG transfer hoses |
| prEN 14423-2002 |
額定壓力達18bar在DN15-DN50的蒸氣軟管用夾具型連接組件 |
Clamp type coupling assemblies for use with DN 15 to DN 50 steam hoses rated for pressures up to 18 bar |
| prEN 14424-2002 |
帶螺紋箍的軟管配件 |
Hose fittings with screwed ferrules |
| prEN 14427-2002 |
可運輸可重復充裝液化石油氣用全纏繞復合瓶 設計和結構 |
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases - Design and construction |
| prEN 14428-2002 |
淋浴室 試驗方法和功能要求 |
Shower enclosures - Functional requirements and test methods |
| prEN 14429-2002 |
廢物的特性 浸析性能試驗 PH值對用初酸/堿雜質浸析的影響 |
Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com