標準號 |
中文名稱 |
英文名稱 |
| DIN EN 271-2000 |
呼吸防護裝置.噴砂時用帶保護罩和壓縮空氣管道或清新空氣軟管的呼吸儀.要求、試驗、標記(包括補充件A1) |
(Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking (including Amendment A1:2000); German version EN 271:1995 + A |
| DIN EN 27182-1991 |
聲學.測定反射到手持式鏈鋸使用者耳朵里的空氣傳播噪聲(ISO7182:1984) |
(Acoustics; measurement at the operator`s position of airborne noise emitted by chain saws (ISO 7182:1984); german version EN 27182:1991) |
| DIN EN 27185-1994 |
程序語言.Pascal語言 |
(Programming languages; Pascal (ISO/IEC 7185:1990); English version EN 27185:1992) |
| DIN EN 27213-1993 |
紙漿.檢驗取樣 |
(Pulps; sampling for testing (ISO 7213:1981); German version EN 7213:1993) |
| DIN EN 27243-1993 |
熱環境.用濕球總溫度指數對操作人員受熱應力影響的估算 |
(Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989); German version EN 27243:1993) |
| DIN EN 27286-1991 |
電阻焊接機用圖形符號(ISO7286-86) |
(Graphical symbols for resistance welding equipment (ISO 7286:1986); german version EN 27286:1991) |
| DIN EN 2732-2005 |
航空航天系列.鎂合金MG-C46001-T6.冷型鑄造 |
|
| DIN EN 27326-1993 |
橡膠和塑料軟管.靜態條件下的耐臭氧性的測定 |
(Rubber and plastics hoses; assessment of ozone resistance under static conditions (ISO 7326:1991); German version EN 27326:1993) |
| DIN EN 27389-1991 |
高層建筑.接縫密封材料.恢復能力的測定(ISO7389:1987) |
(Building construction; jointing products; determination of elastic recovery (ISO 7389:1987); german version EN 27389:1990) |
| DIN EN 27390-1991 |
高層建筑.接縫密封材料.抗流動穩定性測定(ISO7390:1987) |
(Building construction; jointing products; determination of resistance to flow (ISO 7390:1987); german version EN 27390:1990) |
| DIN EN 274-1-2002 |
衛生器具用下水道管件.第1部分:要求 |
(Waste fittings for sanitary appliances - Part 1: Requirements; German version EN 274-1:2002) |
| DIN EN 274-2-2002 |
衛生設備用下水道管件.第2部分:試驗方法 |
(Waste fittings for sanitary appliances - Part 2: Test methods; German version EN 274-2:2002) |
| DIN EN 274-3-2002 |
衛生器具用下水道管件.第3部分:質量控制 |
(Waste fittings for sanitary appliances - Part 3: Quality control; German version EN 274-3:2002) |
| DIN EN 2743-2003 |
航空航天系列.纖維增強塑料.測試前未老化材料調理的標準程序 |
(Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001) |
| DIN EN 27434-1992 |
一字槽錐端緊定螺釘 |
(Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992) |
| DIN EN 27435-1992 |
一字槽圓柱端緊定螺釘 |
(Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992) |
| DIN EN 27436-1992 |
一字槽凹端緊定螺釘 |
(Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992) |
| DIN EN 2744-1992 |
航空和航天.非金屬材料.優選檢驗溫度 |
(Aerospace series; non-metallic materials; preferred test temperatures; german version EN 2744:1992) |
| DIN EN 2746-1998 |
航空和航天.玻璃纖維增強塑料.三點法彎曲試驗 |
(Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998) |
| DIN EN 27487-2-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.19tpmm(48tpi)的記錄方式.在130mm(5.25in)的軟磁盤存儲器上進行 |
(Information processing; data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm (48 tpi), on both sides; part 2: track format A (ISO 7487-2:1985); german version EN 27487-2:1989 |
| DIN EN 27487-3 Berichtigung 1-1993 |
DINEN27487T.3:12.91的修正 |
(Rectification in DIN EN 27487 part 3:12.91; German version EN 27487-3:1989/A1:1993) |
| DIN EN 27487-3-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.19tpmm(48tpi)的記錄方式.在130mm(5.25in)的軟磁盤存儲器上進行 |
(Information processing; data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm (48 tpi), on both sides; part 3: track format B (ISO 7487-3:1986); german version EN 27487-3:1989 |
| DIN EN 275-1992 |
木材防腐劑.對防海洋生物腐蝕作用的測定 |
(Wood preservatives; determination of the protective effectiveness against marine borers; german version EN 275:1992) |
| DIN EN 2752-1990 |
航空和航天.帶圓柱形劃孔雙面截短法蘭的自鎖式鉚接螺母.等級1100MPa/223℃ |
(Aerospace; nuts, anchor, self locking, fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235 C; german version EN 2752:1987) |
| DIN EN 27520-1992 |
鎳鐵.鈷含量的測定.火焰原子吸收光譜測定法(ISO7520-85) |
(Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985); german version EN 27520:1991) |
| DIN EN 27526-1992 |
鎳.鎳鐵.鎳合金.硫含量的測定.感應電爐燃燒后紅外線吸收法(ISO7526-85) |
(Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991) |
| DIN EN 27527-1992 |
鎳.鎳鐵.鎳合金.硫含量的測定.感應電爐燃燒后碘量滴定法(ISO7527-85) |
(Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991) |
| DIN EN 2753-1996 |
航空和航天.合金鋼制鍍鎘MoS(角注2)潤滑帶圓柱形沉頭孔單面法蘭自鎖鉚接螺母.等級1100MPa(室溫下)/235℃ |
(Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 2753:1996) |
| DIN EN 27574-1-1989 |
聲學.規定和檢驗機器和設備所標明的噪聲發送值的統計方法.第1部分:總則和概念 |
(Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 1: general considerations and definitions; (identical with ISO 7574-1:1985); german version EN 27574-1:1988) |
| DIN EN 27574-2-1989 |
聲學.規定和檢驗機器和設備所標明的噪聲發送值的統計方法.第2部分:單機標定方法 |
(Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines; (identical with ISO 7574-2:1985); german version EN 27574-2:1988) |
| DIN EN 27574-3-1989 |
聲學.規定和檢驗機器和設備所標明的噪聲發送值的統計方法.第3部分:批量機器發送噪聲的簡易方法(過渡規則) |
(Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (identical with ISO 7574-3:1985); german version EN 27574- |
| DIN EN 27574-4-1989 |
聲學.規定和檢驗機器和設備所標明的噪聲發送值的統計方法.第4部分:批量機器發送噪聲的簡易方法(過渡規則) |
(Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines; (identical with ISO 7574-4:1985); german version EN 27574-4:1988) |
| DIN EN 277-1995 |
包裝.食品運輸袋.聚炳烯織物袋 |
(Sacks for the transport of food aid - Sacks made of woven polypropylene fabric; German version EN 277:1995) |
| DIN EN 27721-1992 |
沉頭螺釘.沉頭的形狀和檢驗(ISO7721-83) |
(Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991) |
| DIN EN 27740 Berichtigung 1-1996 |
對DINEN27740:1992-08的校正 |
(Corrigenda to DIN EN 27740:1992-08 (EN 27740:1992/AC:1996)) |
| DIN EN 27740-1992 |
外科器械.可更換刀片的手術刀.裝配尺寸 |
(Instruments for surgery; scalpels with detachable blades; fitting dimensions (ISO 7740:1985); german version EN 27740:1992) |
| DIN EN 27787-3-1994 |
牙科學.牙科用旋轉器械.切割工具.第3部分:銑床用硬質合金刀具 |
(Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines (ISO 7787-3:1991); German version EN 27787-3:1993) |
| DIN EN 2781-1998 |
航空和航天.非金屬材料.結構膠粘劑.檢驗方法.粘附底層劑層厚的測定 |
(Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998) |
| DIN EN 27828-1994 |
水的質量.生物取樣法.水生海底大型無脊椎動物手網取樣指南 |
(Water quality; methods of biological sampling; guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985); German version EN 27828:1994) |
| DIN EN 27841-1991 |
自動疏水閥.蒸汽漏失測定.檢驗方法.(ISO7841-88) |
(Automatic steam traps; determination of steam loss; test methods (ISO 7841:1988); german version EN 27841:1991) |
| DIN EN 27842-1991 |
自動疏水閥.流量測定.試驗方法.(ISO7842-88) |
(Automatic steam traps; determination of discharge capacity; test methods (ISO 7842:1988); german version EN 27842:1991) |
| DIN EN 27888-1993 |
水質.電導率的測定 |
(Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993) |
| DIN EN 2790-1991 |
航空和航天.帶關節軸承.自潤滑內襯.螺紋柄.1.5旋進深度×螺紋直徑的可調耳環頭.尺寸和負載 |
(Aerospace series; rod-ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank, with engagement: 1,5thread diameter; dimensions and loads; german version EN 2790:1991) |
| DIN EN 2791-1991 |
航空和航天.1.5旋進深度X螺紋直徑的螺紋柄的可調單叉頭.尺寸和負載 |
(Aerospace series; rod-ends, adjustable, single fork and threaded shank with engagement: 1,5thread diameter; dimensions and loads; german version EN 2791:1991) |
| DIN EN 27917-1991 |
聲學.切割設備發出的氣載噪聲.在操作者的位置的測量(ISO7917-87) |
(Acoustics; measurement at the operator`s position of airborne noise emitted by brush saws (ISO 7917:1987); german version EN 27917:1991) |
| DIN EN 2792-1991 |
航空和航天.1.5旋進深度×螺紋直徑的螺紋柄的可調雙叉頭.尺寸和負載 |
(Aerospace series; rod-ends, adjustable, double fork and threaded shank with engagement: 1,5thread diameter; dimensions and loads; german version EN 2792:1991) |
| DIN EN 2794-001-1999 |
航空和航天.單極,恒溫,額定電流為20A至50A的保護開關.第001部分:交貨技術條件 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German version EN 2794-001:1999) |
| DIN EN 2794-003-1999 |
航空和航天.單極,恒溫,額定電流為20A至50A的保護開關.第003部分:公制端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard; German version EN 2794-003:1999) |
| DIN EN 2794-004-1999 |
航空和航天.單極,恒溫,額定電流為20A至50A的保護開關.第004部分:UNC端子螺紋.產品標準 |
(Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2794-004:1999) |
| DIN EN 27941-1993 |
商用丙烷和丁烷.氣體色譜分析 |
(Commercial propane and butane; analysis by gas chromatography (ISO 7941:1988); German version EN 27941:1993) |
| DIN EN 27963-1992 |
鋼材焊接.焊接超聲檢驗用2號較驗器 |
(Welds in steel; calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985); german version EN 27963:1992) |
| DIN EN 27965-1-1993 |
包裝.包裝袋.墜落沖擊試驗.第1部分:紙袋 |
(Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984); german version EN 27965-1:1992) |
| DIN EN 280-2001 |
可移動升降工作平臺.設計計算.穩定性標準.結構.安全.檢查和試驗 |
(Mobile elevating work platforms - Design calculation - Stability criteria; Construction; Safety; Examinations and tests; German version EN 280:2001) |
| DIN EN 280/A1-2004 |
移動升降工作平臺.設計計算.穩定性標準.施工.安全.檢查和試驗 |
|
| DIN EN 2802-2005 |
航空航天系列.鋁合金AL-P7475-T761.薄板和帶材.0.6 mm a 6 mm |
|
| DIN EN 28029-1993 |
塑料軟管.一般用途帶織物襯里的可折疊輸水管 |
(Plastics hose; general purpose collapsible water hose, textile reinforced; specification (ISO 8029:1985); German version EN 28029:1993) |
| DIN EN 2803-2005 |
航空航天系列.鋁合金AL-P7475-T761.覆層薄板和帶材.1.0 mm a 6 mm |
|
| DIN EN 28033-1993 |
橡膠和塑料軟管.層間粘合力的測定 |
(Rubber and plastic hose; determination of adhesion between components (ISO 8033:1991); German version EN 28033:1993) |
| DIN EN 28049-1992 |
鎳鐵粒.分析用取樣 |
(Ferronickel shot; sampling for analysis (ISO 8049:1988); german version EN 28049:1992) |
| DIN EN 28050-1992 |
鎳鐵棒和鎳鐵塊.分析用取樣 |
(Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988); german version EN 28050:1992) |
| DIN EN 28064-1993 |
信息處理.12.7mm(0.5in)磁寬用帶盤.規格16,18和22 |
(Information processing; reels for 12,7 mm (0.5 in) wide magnetic tapes; sizes 16, 18 and 22 (ISO 8064:1985); English version EN 28064:1993) |
| DIN EN 2808-1997 |
航空和航天.鈦和鈦合金陽極氧化 |
(Aerospace series - Anodizing of titanium and titanium alloys; German version EN 2808:1997) |
| DIN EN 2809-2001 |
航空航天系列.鍍銀、耐熱鋼制、標準對邊、高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/650℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 鳦; German version EN 2809:2001) |
| DIN EN 28094-1994 |
鋼纜輸送機皮帶.纜索芯線涂層粘合強度試驗 |
(Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984); German version EN 28094:1994) |
| DIN EN 2810-2001 |
航空航天系列.鈍化、耐熱鋼制、標準對邊、高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/650℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 鳦; German version EN 2810:2001) |
| DIN EN 28167-1992 |
電阻焊突臺 |
(Projections for resistance welding (ISO 8167:1989); german version EN 28167:1992) |
| DIN EN 28187-1992 |
家用冷凍裝置.冷藏柜.性能和檢驗方法(ISO8187-91)德文本EN28187-91 |
(Household refrigerating appliances; refrigerator-freezers; characteristics and test methods (ISO 8187:1991); german version EN 28187:1991) |
| DIN EN 28206-1992 |
氣割機的驗收檢驗.再現準確性.操作特性 |
(Acceptance tests for oxygen cutting machines; reproducible accuracy; operational characteristics (ISO 8206:1991); german version EN 28206:1992) |
| DIN EN 28233-1991 |
熱塑性塑料配件.扭矩.檢驗法(ISO8233-88) |
(Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990) |
| DIN EN 28265-1994 |
水質.為淺淡水中多石底層上的水底大無脊椎動物而設計和使用定量取樣器 |
(Water quality; design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters (ISO 8265:1988); German version EN 28265:1994) |
| DIN EN 2828-1993 |
航空航天.通過壓光法檢驗金屬鍍層的粘附強度 |
(Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993) |
| DIN EN 2829-1995 |
航空和航天.用噴丸清理作金屬涂層的附著強度檢驗 |
(Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994) |
| DIN EN 283-1991 |
可更換的容器.檢驗 |
(Swap bodies; testing; german version EN 283:1991) |
| DIN EN 2830-1993 |
航空航天.通過切剪應力檢驗金屬鍍層的粘附強度 |
(Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993) |
| DIN EN 2831-1993 |
航空航天.鋼的氫脆化.慢彎曲試驗 |
(Aerospace series; hydrogen embrittlement of steels; test by slow bending; german version EN 2831:1993) |
| DIN EN 28317-1994 |
防小孩拆開的包裝.可再次包裝件的要求和試驗方法 |
(Child-resistant packaging; requirements and testing procedures for reclosable packages (ISO 8317:1989); German version EN 28317:1992) |
| DIN EN 2832-1993 |
航空航天.鋼的氫脆化.缺口拉伸試驗 |
(Aerospace series; hydrogen embrittlement of steels; notched specimen test; german version EN 2832:1993) |
| DIN EN 28339-1991 |
高層建筑.接縫密封材料.抗拉強度的測定(ISO8339:1984) |
(Building construction; jointing products; determination of tensile properties (ISO 8339:1984); german version EN 28339:1990) |
| DIN EN 28340-1991 |
高層建筑.接縫密封材料.預應力條件下抗拉強度的測定(ISO8340:1984) |
(Building construction; jointing products; determination of tensile properties at maintained extension (ISO 8340:1984); german version EN 28340:1990) |
| DIN EN 28343-1992 |
鎳鐵.硅含量的測定.重量分析法(ISO8343-85) |
(Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985); german version EN 28343:1991) |
| DIN EN 28378-1-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.3.8ptmm(96tpi)的記錄方式.在130mm(5.25in)的軟磁盤存儲器上進 |
(Information processing; data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 3,8 tpmm (96 tpi), on both sides; part 1: dimensional, physical and magnetic characteristics (ISO 8378-1:1 |
| DIN EN 28378-2-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.3.8ptmm(96tpi)的記錄方式.在130mm(5.25in)的軟磁盤存儲器上進 |
(Information processing; data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 3,8 tpmm (96 tpi), on both sides; part 2: track format A (ISO 8378-2:1986); german version EN 28378-2:1989 |
| DIN EN 28378-3-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.3.8ptmm(96tpi)的記錄方式.在130mm(5.25in)的軟磁盤存儲器上進 |
(Information processing; data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 3,8 tpmm (96 tpi), on both sides; part 3: track format B (ISO 8378-3:1986); german version EN 28378-3:1989 |
| DIN EN 28394-1991 |
高層建筑.接縫密封材料.單一成分密封材料的可加工性測定(ISO8394:1988) |
(Building construction; jointing products; determination of extrudability of one-component sealants (ISO 8394:1988); german version EN 28394:1990) |
| DIN EN 284-1992 |
交換容器.C級交換容器.尺寸和一般要求 |
(Swap bodies; swap bodies of class C; dimensions and general requirements; german version EN 284:1992) |
| DIN EN 28430-1-1992 |
點焊.電極夾具.第1部分:錐形接頭錐度1:10 |
(Resistance spot welding; electrode holders; part 1: taper fixing 1:10 (ISO 8430-1:1988); german version EN 28430-1:1992) |
| DIN EN 28430-2-1992 |
點焊.電極夾具.第2部分:莫氏錐形接頭 |
(Resistance spot welding; electrode holders; part 2: Morse taper fixing (ISO 8430-2:1988); german version EN 28430-2:1992) |
| DIN EN 28430-3-1992 |
點焊.電極夾具.第3部分:端推力直柄接頭 |
(Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust (ISO 8430-3:1988); german version EN 28430-3:1992) |
| DIN EN 28474-1993 |
包裝.滿裝的運輸包裝.浸水試驗 |
(Packaging; Complete, filled transport packages; water immersion test (ISO 8474:1986); german version EN 28474:1992) |
| DIN EN 285-1997 |
消毒.蒸氣消毒器.大型消毒器 |
(Sterilization - Steam sterilizers - Large sterilizers; German version EN 285:1996) |
| DIN EN 2851-1992 |
航空和航天.除驅動裝置之外的部件和組件的標志.圖紙上的說明 |
(Aerospace series; marking of parts and assemblies other than engines; indications on drawings; german version EN 2851:1989) |
| DIN EN 28510-1-1993 |
粘合劑.軟/硬粘合試樣的剝離試驗.第1部分:90度剝離試驗 |
(Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90 peel (ISO 8510-1:1990); German version EN 28510-1:1993) |
| DIN EN 28510-2-1993 |
粘合劑.軟/硬粘合試樣的剝離試驗.第2部分:180度剝離試驗 |
(Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 2: 180 peel (ISO 8510-2:1990); German version EN 28510-2:1993) |
| DIN EN 2859-1995 |
航空和航天.鍍鎘合金鋼制短螺紋六角緊配合螺栓.等級:1100MPa(室溫235℃) |
(Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 2859:1995) |
| DIN EN 286-1-1998 |
空氣或氮氣用簡單非受火壓力容器.第1部分:一般用途的壓力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Druckbehaelter fuer allgemeine Zwecke; German version EN 286-1:1998) |
| DIN EN 286-1/A1-2002 |
裝有空氣或氮氣的簡易非點火壓力容器.第1部分:通用壓力容器.修改件A1 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; Amendment A1; German version EN 286-1:1998/A1:2002 + AC:2002) |
| DIN EN 286-1/A2-2005 |
罐裝空氣或氮氣用非受火簡易壓力容器.第1部分:通用壓力容器.德國版本 EN 286-1-1998/A2-2005 |
|
| DIN EN 286-2-1992 |
空氣和氮氣用簡單不受熱壓力容器.第2部分:汽車和掛車上壓縮空氣制動設備和輔助裝置用壓力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen; part 2: pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers; german version EN 286-2:1992) |
| DIN EN 286-3-1994 |
空氣或氮氣用簡單不受熱壓力容器.第3部分:軌道車輛用壓縮空氣制動設備和氣壓輔助裝置用鋼制壓力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-3:1994) |
| DIN EN 286-4-1994 |
空氣和氮氣用簡單不受熱壓力容器.第4部分:軌道車輛中壓縮空氣制動設備和氣動輔助裝置用鋁合金制壓力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-4:1994) |
| DIN EN 28601-1993 |
數據和交換格式.信息交換.時間和日期的表示 |
(Data elements and interchange formats; information interchange; representation of dates and times (ISO 8601:1988 and its technical corrigendum 1:1991); german version EN 28601:1992) |
| DIN EN 28630-1-1993 |
信息處理.每面80列磁道和13262次磁通變換/弧度雙面錄制時用改進頻率調制錄制在130mm(5.25英寸)軟盤上進行數 |
(Information processing; data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side; part 1: dimensional, physical and magnetic characteristics (ISO 8630-1:1987); |
| DIN EN 28630-2-1993 |
信息處理.每面80列磁道和13262次磁通變換/弧度雙面錄制時用改進頻率調制錄制在130mm(5.25英寸)軟盤上進行數 |
(Information processing; data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side; part 2: track format A for 77 tracks (ISO 8630-2:1987); german version EN 28630-2 |
| DIN EN 28630-3-1993 |
信息處理.每面80列磁道和13262次磁通變換/弧度雙面錄制時用改進頻率調制錄制在130mm(5.25英寸)軟盤上進行數 |
(Information processing; data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side; part 3: track format B for 80 tracks (ISO 8630-3:1987); german version EN 28630-3 |
| DIN EN 28631-1994 |
信息技術.程序結構和規范形式 |
(Information technology - Program constructs and conventions for their representation (ISO/IEC 8631:1989); German version EN 28631:1993) |
| DIN EN 28632-1-1994 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第1部分:功能說明 |
(Information technology - Computer graphics; metafile for the storage and transfer of picture description information - Part 1: Functional specification (ISO/IEC 8632-1:1992); English version EN 28632-1:1994) |
| DIN EN 28632-1/A1-1996 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第1部分:功能說明.更改A1:外形的規定 |
(Information technology - Computer graphics, metafile for the storage and transfer of picture description information - Part 1: Functional specification, Amendment A1: Rules for profiles (ISO/IEC 8632-1:1992/Amendment 1:1994); English version EN 28632-1:1 |
| DIN EN 28632-1/A2-1996 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第1部分:功能說明.修訂2:格式化應用的擴充 |
(Information technology - Computer graphics, metafile for the storage and transfer of picture description information - Part 1: Functional specification, Amendment A2: Application structuring extensions (ISO/IEC 8632-1:1992/Amendment 2:1995); English vers |
| DIN EN 28632-2-1994 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第2部分:符號編碼 |
(Information technology - Computer graphics; metafile for the storage and transfer of picture description information - Part 2: Character encoding (ISO/IEC 8632-2:1992); English version EN 28632-2:1994) |
| DIN EN 28632-2/A1-1996 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第2部分:符號編碼.更改A1:外形規定 |
(Information technology - Computer graphics, metafile for the storage and transfer of picture description information - Part 2: Character encoding, Amendment A1: Rules for profiles (ISO/IEC 8632-2:1992/Amendment 1:1994); English version EN 28632-2:1994/A1 |
| DIN EN 28632-3-1994 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第3部分:二進制編碼 |
(Information technology - Computer graphics; metafile for the storage and transfer of picture description information - Part 3: Binary encoding (ISO/IEC 8632-3:1992); English version EN 28632-3:1994) |
| DIN EN 28632-3/A1-1996 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第3部分:二進制編碼.更改A1:外形規定 |
(Information technology - Computer graphics, metafile for the storage and transfer of picture description information - Part 3: Binary encoding, Amendment A1: Rules for profiles (ISO/IEC 8632-3:1992/Amendment 1:1994); English version EN 28632-3:1994/A1:19 |
| DIN EN 28632-4-1994 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第4部分:透明可讀普通文本的編碼 |
(Information technology - Computer graphics; metafile for the storage and transfer of picture description information - Part 4: Clear text encoding (ISO/IEC 8632-4:1992); English version EN 28632-4:1994) |
| DIN EN 28632-4/A1-1996 |
信息技術.圖形數據加工.圖像信息存儲和傳送用文件.第4部分:透明可讀普通文本的編碼.更改A1:外形規定 |
(Information technology - Computer graphics, metafile for the storage and transfer of picture description information - Part 4: Clear text encoding, Amendment A1: Rules for profiles (ISO/IEC 8632-4:1992/Amendment 1:1994); English version EN 28632-4:1994/A |
| DIN EN 28651-1-1993 |
信息加工.機算機制圖.圖形核心系統用語言集(GKS).第1部分:FORTRAN |
(Information processing systems; computer graphics; Graphical Kernel System (GKS) language bindings; part 1: FORTRAN (ISO 8651-1:1988); english version EN 28651-1:1992) |
| DIN EN 28651-2-1993 |
信息處理.機算機制圖.圖形核心系統用語言集(GKS).第2部分:Pascal |
(Information processing systems; computer graphics; Graphical Kernel System (GKS) language bindings; part 2: Pascal (ISO 8651-2:1988); english version EN 28651-2:1992) |
| DIN EN 28651-3-1993 |
信息處理.機算機制圖.圖形核心系統用語言集(GKS).第3部分:Ada |
(Information processing systems; computer graphics; Graphical Kernel System (GKS) language bindings; part 3: Ada (ISO 8651-3:1988); english version EN 28651-3:1992) |
| DIN EN 28653-1993 |
珠寶.戒指尺寸.定義、測量方法和名稱符號 |
(Jewellery; ring-sizes; definition, measurement and designation (ISO 8653:1986); german version EN 28653:1992) |
| DIN EN 28654-1993 |
金合金的顏色.標識、顏色系列和名稱符號 |
(Colours of gold alloys; definition, range of colours and designation (ISO 8654:1987); german version EN 28654:1992) |
| DIN EN 28659-1991 |
熱塑性塑料配件.疲勞強度.檢驗法(ISO8659-88) |
(Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com