標準號 |
中文名稱 |
英文名稱 |
| DIN EN 13675-2004 |
機械安全.管成形、輥軋及其精整線設備的安全要求 |
|
| DIN EN 13676-2001 |
與食品接觸的聚合物涂覆的紙和紙板.針孔的檢測 |
(Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001) |
| DIN EN 13677-1-2003 |
增強的熱塑性模塑復合材料.GMT規范.第1部分:名稱與符號 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation; German version EN 13677-1:2003) |
| DIN EN 13677-2-2003 |
增強的熱塑性模塑復合材料.GMT規范.第2部分:試驗方法和一般要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003) |
| DIN EN 13677-3-2003 |
增強的熱塑性模塑復合材料.GMT規范.第3部分:特殊要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements; German version EN 13677-3:2003) |
| DIN EN 13683-2004 |
園藝機具.整體動力粉碎機/削片機.安全 |
|
| DIN EN 13684-2004 |
園藝設備.可在側面控制的草坪通氣機和松土機.安全 |
|
| DIN EN 13687-1-2002 |
混凝土結構的保護和檢修用產品和設備.試驗方法.熱相容性測定.第1部分:用防凍鹽浸泡的凍融循環 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion; German version DIN EN 13687-1:2002) |
| DIN EN 13687-2-2002 |
混凝土結構的保護和檢修用產品和設備.試驗方法.熱相容性測定.第2部分:雷雨循環(熱沖擊) |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002) |
| DIN EN 13687-3-2002 |
混凝土結構的保護和檢修用產品和設備.試驗方法.熱相容性測定.第3部分:無防凍鹽沖擊的熱循環 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002) |
| DIN EN 13687-4-2002 |
混凝土結構的防護和檢修用產品和設備.試驗方法.熱適應性的測定.第4部分:干熱循環試驗 |
(Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002) |
| DIN EN 13687-5-2002 |
混凝土結構的防護和檢修用產品和設備.試驗方法.熱適應性的測定.第5部分:耐溫度沖擊性 |
(Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock; German version EN 13687-5:2002) |
| DIN EN 1369-1997 |
鑄造.磁粉檢驗 |
(Founding - Magnetic particle inspection; German version EN 1369:1996) |
| DIN EN 13693-2004 |
預制混凝土產品.特殊屋頂組件 |
|
| DIN EN 13697-2002 |
化學消毒劑和防腐變劑.食品、工業、家庭和研究所范圍內使用的化學消毒劑的殺菌和/或殺真菌性能評定用定量無 |
(Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirement |
| DIN EN 13698-1-2004 |
托盤生產規范.第1部分:800mmx1200mm木制平托盤的制作規范 |
(Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets; German version EN 13698-1:2003) |
| DIN EN 13698-1-2004 |
托盤生產規范.第1部分:800 mm x 1200 mm木制平托盤的制作規范 |
|
| DIN EN 13698-2-2004 |
托盤生產規范.第2部分:1000mmx1200mm木制平托盤的制作規范 |
(Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets; German version EN 13698-2:2003) |
| DIN EN 13698-2-2004 |
托盤生產規范.第2部分:1000 mm x 1200 mm木制平托盤的制作規范 |
|
| DIN EN 137-1993 |
呼吸保護裝置.壓縮空氣容器裝置(壓縮空氣呼吸器).要求、檢驗、標識 |
(Respiratory protective devices; self-contained open-circuit compressed air breathing apparatus; requirements, testing, marking; German version EN 137:1993) |
| DIN EN 1370-1997 |
鑄造.用標準試樣對比檢驗表面粗糙度 |
(Founding - Surface roughness inspection by visualtactile comparators; German version EN 1370:1996) |
| DIN EN 137000-1998 |
總規范.電動機運行用帶液態電介質的鋁電介質交流電壓電容器 |
(Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997) |
| DIN EN 13701-2002 |
航空航天.航空系統.術語詞匯 |
(Aerospace - Space systems - Glossary of terms; Trilingual version EN 13701:2001) |
| DIN EN 13702-1-2004 |
瀝青和瀝青粘合劑.改性瀝青動態粘度的測定.第1部分:圓錐和平板法 |
|
| DIN EN 13702-2-2004 |
瀝青和瀝青粘合劑.改性瀝青動態粘度的測定.第2部分:同軸圓柱法 |
|
| DIN EN 13703-2004 |
瀝青和瀝青粘合劑.變形能的測定 |
|
| DIN EN 13704-2002 |
化學消毒劑.食品、工業、家庭和研究單位用化學消毒劑的殺孢子活性評定用定量懸浮試驗.試驗方法和要求(階段2 |
() |
| DIN EN 13705-2004 |
熱塑性材料的焊接.熱氣焊機械和設備(包括擠焊) |
|
| DIN EN 13706-1-2003 |
增強塑料復合材料.擠拉制型材規范.第1部分:命名 |
(Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation; German version EN 13706-1:2002) |
| DIN EN 13706-2-2003 |
增強塑料復合材料.擠拉制型材規范.第2部分:試驗方法和一般要求 |
(Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements; German version EN 13706-2:2002) |
| DIN EN 13706-3-2003 |
增強塑料復合材料.擠拉制型材規范.第3部分:特殊要求 |
(Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002) |
| DIN EN 13707-2005 |
防水用柔性薄板.屋頂防水用增強瀝青薄板.定義和特性 |
|
| DIN EN 13708-2002 |
食品.用電子自旋共振光譜法檢驗經輻照的食品 |
(Foodstuffs - Detection of irradiated food containing crystalline sugar by ESR-spectroscopy; German version EN 13708:2001) |
| DIN EN 13709-2003 |
工業用閥.鋼制球閥、球狀截止閥和止回閥 |
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) |
| DIN EN 1371-1-1997 |
鑄造業.探傷檢驗.第1部分:砂型鑄件.重力金屬鑄件.低壓金屬鑄件 |
(Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997) |
| DIN EN 1371-2-1998 |
鑄造業.滲透檢驗.第2部分:精密鑄件 |
(Founding - Liquid penetrant inspection - Part 2: Investment castings; German version EN 1371-2:1998) |
| DIN EN 137100-1998 |
分規范.電動機啟動用帶液態電介質的鋁電介質交流電壓電容器.結構類型識別 |
(Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997) |
| DIN EN 137101-1998 |
空白詳細規范.電動機啟動用帶液態電介質的鋁電介質交流電壓電容器.結構類型識別 |
(Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995) |
| DIN EN 13711-2002 |
內河導航船舶.船舶運行用絞車的安全要求 |
(Inland navigation vessels - Winches for ship operation - Safety requirements; German version EN 13711:2002) |
| DIN EN 13716-2003 |
表面活性劑.基本氮總量的測定.電勢滴定法 |
(Surface active agents - Determination of total base nitrogen - Potentiometric titration; German version EN 13716:2001) |
| DIN EN 13717-2003 |
表面活化劑.測定一級、二級和三級氨基氮.電位測量滴定法 |
(Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration; German version EN 13717:2002) |
| DIN EN 13718-1-2002 |
空氣、水和難以通行地帶的救護.第1部分:病人治療連續性所需醫療器具接口要求 |
(Air, water and difficult terrain ambulances - Part 1: Medical device interface requirements for the continuity of patient care; German version EN 13718-1:2002) |
| DIN EN 13718-2-2002 |
空氣、水和難以通行地帶的救護.第2部分:病人治療連續性所需手術和技術要求 |
(Air, water and difficult terrain ambulances - Part 2: Operational and technical requirements for the continuity of patient care; German version EN 13718-2:2002) |
| DIN EN 13719 Berichtigung 1-2005 |
土工織物及其相關產品.與土工合成阻擋層接觸的土工織物長期保護效果的測定.DIN EN 13719-2002的勘誤 |
|
| DIN EN 13719-2002 |
土工織物和土工織物有關產品.與土工合成屏障接觸的土工織物長期保護效能的測定 |
(Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; German version EN 13719:2002) |
| DIN EN 1372-1999 |
膠粘劑.地板覆蓋物和墻壁涂層用膠粘劑的試驗方法 |
(Adhesives - Test method for adhesives for floor and wall coverings - Peel test; German version EN 1372:1999) |
| DIN EN 13720-2002 |
可運輸儲氣瓶.乙炔氣瓶蓄電池設備裝填條件 |
(Transportable gas cylinders - Filling conditions for acetylene cylinder battery vehicles; German version EN 13720:2002) |
| DIN EN 13721-2004 |
家具.表面反射的評估 |
|
| DIN EN 13722-2004 |
家具.表面光澤度的評估 |
|
| DIN EN 13723-2002 |
石油產品.汽油中低鉛含量的測定.波長色散X射線熒光光譜法 |
(Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF); German version EN 13723:2002) |
| DIN EN 13724-2003 |
郵政業務.私人信箱和信箱投信口金屬板縫隙的要求和試驗方法 |
(Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2002) |
| DIN EN 13725-2003 |
空氣質量.用動態氣味測定法測定氣味濃度 |
(Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003) |
| DIN EN 13726-1-2002 |
主要傷口敷料試驗方法.第1部分:吸收度 |
(Test methods for primary wound dressings - Part 1: Aspects of absorbency; German version EN 13726-1:2002) |
| DIN EN 13726-2-2002 |
主要傷口敷料試驗方法.第2部分:可滲透薄膜敷料濕氣蒸發傳輸率 |
(Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of permeable film dressings; German version EN 13726-2:2002) |
| DIN EN 13726-3-2003 |
非放射性醫療器械.主要傷口敷料試驗方法.第3部分:防水性 |
(Non-active medical devices - Test methods for primary wound dressings - Part 3: Waterproofness; German version EN 13726-3:2003) |
| DIN EN 13726-4-2003 |
非放射性醫療器械.主要傷口敷料試驗方法.第4部:符合性 |
(Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability; German version EN 13726-4:2003) |
| DIN EN 13726-6-2003 |
非放射性醫療器械.主要傷口敷料試驗方法.第6部分:氣味控制 |
(Non-active medical devices - Test methods for primary wound dressings - Part 6: Odour control; German version EN 13726-6:2003) |
| DIN EN 13727-2004 |
化學消毒劑和防腐劑.醫療器械用化學消毒劑的殺菌作用評價用定量懸浮試驗.試驗方法和要求(第2階段第1步) |
|
| DIN EN 1373-1999 |
膠粘劑.地板及墻壁鋪面用膠粘劑的檢驗方法.剪切試驗 |
(Adhesives - Test methods for adhesives for floor and wall coverings - Shear test; German version EN 1373:1999) |
| DIN EN 13732-2003 |
食品加工機械.農家散裝奶冷卻器.使用、安全和衛生用結構、性能和適用性要求 |
(Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene; German version EN 13732:2002) |
| DIN EN 13733-2002 |
混凝土構件的修補和保護用產品和系統.試驗方法.結構搭接耐久力的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of the durability of structural bonding; German version EN 13733:2002) |
| DIN EN 13736-2003 |
機床安全.氣動壓力機 |
(Safety of machine tools - Pneumatic presses; German version EN 13736:2003) |
| DIN EN 13738-2005 |
土工織物和土工織物相關產品.土壤中拔出阻力的測定 |
|
| DIN EN 13739-1-2003 |
農業機械.固體肥料撒播機和全幅撒肥機.環境保護.第1部分:要求 |
(Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 1: Requirements; German version EN 13739-1:2003) |
| DIN EN 13739-2-2003 |
農業機械.固體肥料撒播機和全幅撒肥機.環境保護.第2部分:試驗方法 |
(Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 2: Test methods; German version EN 13739-2:2003) |
| DIN EN 1374-2000 |
農業機械.圓筒倉用筒倉固定卸載機 |
(Agricultural machinery - Silos stationary unloaders for round silos - Safety; German version EN 1374:2000) |
| DIN EN 13740-1-2003 |
農用機械.固體肥料分行施肥機.環保.第1部分:要求 |
(Agricultural machinery - Solid fertilizer line-distributors; Environmental protection - Part 1: Requirements; German version EN 13740-1:2003) |
| DIN EN 13740-2-2003 |
農用機械.固體肥料分行施肥機.環保.第2部分:試驗方法 |
(Agricultural machinery - Solid fertilizer line-distributors; Environmental protection - Part 2: Test methods; German version EN 13740-2:2003) |
| DIN EN 13741-2004 |
機械干燥系列潮濕冷卻塔的熱性能驗收試驗 |
|
| DIN EN 13742-1-2005 |
灌溉技術.固定式噴水系統.第1部分:選擇、設計、規劃和安裝 |
|
| DIN EN 13742-2-2005 |
灌溉技術.整體設置噴水系統.第2部分:試驗方法 |
|
| DIN EN 13743-2002 |
涂覆磨料的安全要求 |
(Safety requirements for coated abrasives; German version EN 13743:2001) |
| DIN EN 13744-2005 |
運動場表面.通過在熱水中浸漬的加速老化規程 |
|
| DIN EN 13745-2004 |
運動區域用表面.鏡面反射率的測定 |
|
| DIN EN 13746-2004 |
運動場表面.由于水、霜和熱條件的變化而引起的尺寸變化的測定 |
|
| DIN EN 13748-1-2004 |
水磨石磚.第1部分:內部用水磨石磚 |
|
| DIN EN 1375-2003 |
識別卡系統.交叉集成電路卡附加格式.ID-000卡尺寸和物理特性 |
(Identification card systems - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics; German version EN 1375:2002) |
| DIN EN 13750-2003 |
暖爐、炊具或爐架上用家用水壺.定義、要求和試驗方法 |
(Domestic water kettles for use on top of stove, cooker or hob - Definitions, requirements and test methods; German version EN 13750:2002) |
| DIN EN 13751-2002 |
食品.用光致發光法探測輻照過的食品 |
(Foodstuffs - Detection of irradiated food using photostimulated luminescence; German version EN 13751:2002) |
| DIN EN 13752-2003 |
飲用水處理用產品.二氧化錳 |
(Products used for treatment of water intended for human consumption - Manganese dioxide; German version EN 13752:2003) |
| DIN EN 13753-2003 |
生活用水的水處理用品.粒狀活性鋁氧土 |
(Products used for treatment of water intended for human consumption - Granular activated alumina; German version EN 13753:2002) |
| DIN EN 13754-2003 |
生活用水處理用產品.膨潤土 |
(Products used for treatment of water intended for human consumption - Bentonite; German version EN 13754:2003) |
| DIN EN 13755 Berichtigung 1-2004 |
DIN EN 13755-2002的技術勘誤 |
|
| DIN EN 13755-2002 |
天然石料試驗方法.大氣壓下吸水性的測定 |
(Natural stone test methods - Determination of water absorption at atmospheric pressure; German version EN 13755:2001) |
| DIN EN 13756-2003 |
木地板.術語 |
(Wood flooring - Terminology; Trilingual version EN 13756:2002) |
| DIN EN 13757-1-2003 |
儀表及其遠程讀數的通信系統 |
(Communication systems for meters and remote reading of meters - Part 1: Data exchange; English version EN 13757-1:2002) |
| DIN EN 13757-2-2005 |
儀表及其遠程讀數的通信系統.第2部分:物理層和鏈路層 |
|
| DIN EN 13757-3-2005 |
儀表及其遠程讀數的通信系統.第3部分:專用層 |
|
| DIN EN 13757-4-2005 |
儀表通信系統和儀表遠程讀數.第4部分:無線儀表讀數(在868 MHz 至870 MHz SRD頻帶上運行的無線電儀表讀數) |
|
| DIN EN 13758-1-2002 |
紡織品.太陽紫外線保護特性.第1部分:外衣織物試驗方法 |
(Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001) |
| DIN EN 1376 Berichtigung 1-1997 |
對DINEN1376:1996-10的校正 |
(Corrigenda to DIN EN 1376:1996-10 (EN 1376:1996/AC:1996)) |
| DIN EN 1376-1996 |
食品.塊狀甜品中糖精的測定.分光光度測量法 |
(Foodstuffs - Determination of saccharin in table top sweetener preparations - Spectrometric method; German version EN 1376:1996) |
| DIN EN 13761-2002 |
辦公家具.來訪者座椅 |
(Office furniture - Visitors chairs; German version EN 13761:2002) |
| DIN EN 13763-1-2004 |
民用爆炸物.雷管和傳爆管.第1部分:要求 |
|
| DIN EN 13763-11-2004 |
民用爆炸物.雷管和傳爆管.第9部分:雷管和傳爆管抗摔落損壞的測定 |
(Explosives for civil uses - Detonators and relays - Part 11: Determination of resistance to damage by dropping of detonators and relays; German version EN 13763-11:2003) |
| DIN EN 13763-11-2004 |
民用爆炸物.雷管和傳爆管.第9部分:雷管和傳爆管抗摔落損壞的測定 |
|
| DIN EN 13763-12-2004 |
民用爆炸物.雷管和傳爆管.第12部分:雷管抗流體靜壓力的測定 |
(Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure; German version EN 13763-12:2003) |
| DIN EN 13763-12-2004 |
民用爆炸物.雷管和傳爆管.第12部分:雷管抗流體靜壓力的測定 |
|
| DIN EN 13763-13-2004 |
民用爆炸物.雷管和傳爆管.第13部分:電雷管耐靜電放電性的測定 |
|
| DIN EN 13763-15-2005 |
民用爆炸物.雷管和傳爆管.第15部分:等效起爆能力的測定 |
|
| DIN EN 13763-16-2004 |
民用爆炸物.雷管和傳爆管.第16部分:延時精度的測定 |
|
| DIN EN 13763-17-2004 |
民用爆炸物.雷管和傳爆管.第17部分:電雷管的非點火電流測定 |
|
| DIN EN 13763-18-2004 |
民用爆炸物.雷管和傳爆管.第18部分:電雷管的串聯點火電流的測定 |
|
| DIN EN 13763-19-2004 |
民用爆炸物.雷管和傳爆管.第19部分:電雷管的點火脈沖測定 |
|
| DIN EN 13763-2-2002 |
民用爆炸物.雷管和繼電器.第2部分:熱穩定性的測定 |
(Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability; German version EN 13763-2:2002) |
| DIN EN 13763-20-2004 |
民用爆炸物.雷管和傳爆管.第20部分:電子雷管總體承受力的測定 |
(Explosives for civil uses - Detonators and relays - Part 20: Determination of total resistance of electric detonators; German version EN 13763-20:2003) |
| DIN EN 13763-20-2004 |
民用爆炸物.雷管和傳爆管.第20部分:電子雷管總體承受力的測定 |
|
| DIN EN 13763-21-2004 |
民用爆炸物.雷管和傳爆管.第21部分:電雷管的閃絡電壓測定 |
|
| DIN EN 13763-22-2004 |
民用爆炸物.雷管和傳爆管.第22部分:引線的電容、絕緣電阻和絕緣擊穿的測定 |
|
| DIN EN 13763-23-2002 |
民用爆炸物.雷管和繼電器.第23部分:激波管激波速度的測定 |
(Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube; German version EN 13763-23:2002) |
| DIN EN 13763-24-2002 |
民用爆炸物.雷管和繼電器.第24部分:激波管非導電性的測定 |
(Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube; German version EN 13763-24:2002) |
| DIN EN 13763-25-2004 |
民用爆炸物.雷管和傳爆管.第25部分:表面連接器、傳爆管和耦合附件的傳遞能力測定 |
|
| DIN EN 13763-26-2004 |
民用爆炸物.雷管和傳爆管.第26部分:雷管和傳爆管的可靠和安全功能的設備和附件的定義、方法和要求 |
|
| DIN EN 13763-3-2002 |
民用爆炸物.雷管和繼電器.第3部分:沖擊靈敏性的測定 |
(Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact; German version EN 13763-3:2002) |
| DIN EN 13763-4-2004 |
民用爆炸物.雷管和傳爆管.第4部分:引線和沖擊管耐磨性的測定 |
(Explosives for civil uses - Detonators and relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes; German version EN 13763-4:2003) |
| DIN EN 13763-4-2004 |
民用爆炸物.雷管和傳爆管.第4部分:引線和沖擊管耐磨性的測定 |
|
| DIN EN 13763-5-2004 |
民用爆炸物.雷管和傳爆管.第5部分:引線和沖擊管耐切割損壞性的測定 |
(Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes; German version EN 13763-5:2003) |
| DIN EN 13763-5-2004 |
民用爆炸物.雷管和傳爆管.第5部分:引線和沖擊管耐切割損壞性的測定 |
|
| DIN EN 13763-6-2004 |
民用爆炸物.雷管和傳爆管.第5部分:引線耐低溫斷裂性的測定 |
(Explosives for civil uses - Detonators and relays - Part 6: Determination of resistance to cracking at low temperatures of leading wires; German version EN 13763-6:2003) |
| DIN EN 13763-6-2004 |
民用爆炸物.雷管和傳爆管.第5部分:引線耐低溫斷裂性的測定 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com