標準號 |
中文名稱 |
英文名稱 |
| EN 26461-1-1993 |
水質 亞硫酸鹽還原厭氧菌(梭狀芽胞桿菌)孢子的檢測和計數 第1部分：.液態介質富集法 |
Water quality; Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); Part 1: Method by enrichment in a liquid medium (ISO 6461-1:1986) |
| EN 26461-2-1993 |
水質 亞硫酸鹽還原厭氧菌(梭狀芽胞桿菌)孢子的檢測和計數 第2部分：:濾膜過濾法 |
Water quality; Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia); Part 2: Method by membrane filtration (ISO 6461-2:1986) |
| EN 2647-1995 |
標準號： |
中文標題： |
| EN 2648-1995 |
航空航天系列鍍鎘合金鋼凹形墊圈 |
Aerospace series - Washers, concave, in alloy steel, cadmium plated |
| EN 2649-1995 |
航空航天系列鍍鎘合金鋼頭全螺紋的盤形頭有槽螺釘?shù)燃墸?00MPa(環境溫度)/235℃ |
Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2650-1996 |
航空航天系列鈍化耐蝕鋼制全螺紋盤形頭有槽螺釘?shù)燃墸?00 MPa(環境溫度)/425℃ |
Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
| EN 26501-1992 |
鎳鐵 交貨要求的規范 |
Ferronickel; specification and delivery requirements (ISO 6501:1988) |
| EN 2651-1996 |
航空航天系列鍍錫黃銅全螺紋帶槽盤形頭螺釘?shù)燃墸?80MPa(環境溫度)/80℃ |
Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃ |
| EN 2652-1997 |
航空航天系列鍍鎘合金鋼100°普通埋頭全螺紋有槽螺釘?shù)燃墸?00MPa(環境溫度)/235℃ |
Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification ： 900 MPa (at ambient temperature)/235℃ |
| EN 2653-1996 |
航空航天系列鈍化耐蝕鋼制100度普通埋頭螺絲等級：600 MPa(環境溫度)/425℃ |
Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃ |
| EN 2654-1996 |
航空航天系列鍍錫黃銅全螺紋帶槽100°普通埋頭螺釘?shù)燃墸?80MPa(環境溫度)/ 80℃ |
Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃ |
| EN 26553-1991 |
自動蒸汽疏水閥 標志 |
Automatic steam traps-Marking (ISO 6553:1980) |
| EN 26554-1991 |
法蘭連接自動蒸汽疏水閥 結構長度 |
Flanged automatic steam traps-Face-to-face dimensions (ISO 6554:1980) |
| EN 2656-2001 |
航空航天系列連接管焊接的連接端幾何結構 |
Aerospace series - Pipe coupling - Coupling end, welded, Geometric configuration |
| EN 26590-1-1992 |
包裝 袋 名詞和種類 第1部分：紙袋 |
Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983) |
| EN 26590-2-1992 |
包裝 袋 名詞和種類 第2部分：熱塑柔性薄膜袋 |
Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986) |
| EN 26591-1-1992 |
包裝 袋 測量的方法和說明 第1部分：.空紙袋 |
Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984) |
| EN 26591-2-1992 |
包裝 袋 測量的方法和說明 第2部分：.熱塑柔性薄膜空袋 |
Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985) |
| EN 26599-1-1992 |
包裝 袋 試驗的條件 第1部分：紙袋 |
Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983) |
| EN 266-1991 |
卷式墻面飾層 紡織墻面飾層規范 |
Wall coverings in roll form; specification for textile wall coverings |
| EN 2665-001-1999 |
航空航天系列額定電流 20 A 至50 A三極補償溫度斷路器第001部分：技術說明 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification |
| EN 2665-003-1999 |
航空航天系列 額定電流 20 A至50 A三極補償溫度斷路器第003部分：米制螺紋接線柱產品標準 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals - Product standard |
| EN 2665-004-1999 |
航空航天系列 額定電流 20 A 至50 A三極補償溫度斷路器第004部分：UNC螺紋接線柱產品標準 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard |
| EN 2667-6-2001 |
航空航天系列非金屬材料泡沫結構粘合劑：試驗方法第6部分：水吸收性確定 |
Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption |
| EN 267-1999 |
強制通風燃油燃燒器 定義、要求、測試、標志 |
Forced draught oil burners - Definitions, requirements, testing, marking |
| EN 26704-1991 |
自動蒸汽疏水閥 分類 |
Automatic steam traps-Classification (ISO 6704:1982) |
| EN 26777-1993 |
水質 亞硝酸鹽的測定 分子吸收光度法 |
Water quality; Determination of nitrite; Molecular absorption spectrometric method (ISO 6777:1984) |
| EN 268-1991 |
民用彈藥推進劑 要求和試驗方法 |
Propellants for commercial ammunition; requirements and test methods |
| EN 26801-1993 |
橡膠或塑料軟管 容積膨脹的測定 |
Rubber or plastics hoses-Determination of volumetric expansion (ISO 6801:1983) |
| EN 26802-1993 |
鋼絲增強的橡膠和塑料軟管及軟管件 彎抗沖擊試驗 |
Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991) |
| EN 26848-1991 |
惰性氣體保護電弧焊接以及等離子氣體切割和焊接用的鎢極 編碼 |
Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984) |
| EN 26874-1992 |
牙科樹脂基窗溝封封閉劑 |
Dental resin-based pit and fissure sealants (ISO 6874:1988) |
| EN 26891-1991 |
木材結構 機械緊固件接頭 強度和變形特性測定的一般原則 |
Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
| EN 269-1994 |
呼吸保護裝置 包括護罩的動力推動新鮮空氣軟管呼吸器 要求、測試、標志 |
Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
| EN 26922-1993 |
粘合劑 對接頭抗拉強度的測定 |
Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987) |
| EN 26927-1990 |
房屋建造 勾縫用品 密封劑 詞匯 |
Building construction-Jointing products; Sealants; Vocabulary (ISO 6927:1981) |
| EN 2693-1993 |
航空航天系列AL-P5086-H111鋁合金薄板和帶材 0.3 ≤ a≤6 mm |
Aerospace series - Aluminium alloy Al-P5086-H111 - Sheet and strip 0.3 ≤ a ≤6 mm |
| EN 2694-1993 |
航空航天系列AL-P6061-T6或T62鋁合金薄板和帶材 0.4 ≤a≤6 mm |
Aerospace series - Aluminium alloy Al-P6061-T6 or T62 - Sheet and strip 0.4 ≤ a ≤6 mm |
| EN 26948-1991 |
自動蒸氣疏水閥 產品試驗和工作特性試驗 |
Automatic steam traps-Production and performance characteristic tests (ISO 6948:1981) |
| EN 2695-1993 |
航空航天系列AL-P6081-T6鋁合金薄板和帶材 0.3 ≤ a≤ 6 mm |
Aerospace series - Aluminium alloy Al-P6081-T6 - Sheet and strip 0.3 ≤ a ≤6 mm |
| EN 2696-1993 |
航空航天系列AL-P7075-T6或T62鋁合金薄板和帶材 0.4 ≤ a≤ 6 mm |
Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Sheet and strip 0.4≤ a ≤6 mm |
| EN 27023-1992 |
包裝 袋 空紙袋檢驗抽樣方法 |
Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983) |
| EN 27182-1991 |
聲學 在操作者位置上測定鏈鋸發出的空氣聲 |
Acoustics; Measurement at the operators position of airborne noise emitted by chain saws (ISO 7182, edition 1984) |
| EN 27201-1-1994 |
滅火劑 鹵代烷 第1部分：哈龍1211和哈龍1301的規范 |
Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Part 1: Specifications for halon 1211 and halon 1301 (ISO 7201-1:1989) |
| EN 27201-2-1994 |
滅火劑 鹵代烷 第2部分：安全處置和儲運過程的實施規則 |
Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Part 2: Code of practice for safe handling and transfer procedures (ISO 7201-2:1991) |
| EN 27213-1993 |
紙漿 取樣試驗 |
Pulps - Sampling for testing (ISO 7213:1981) |
| EN 27243-1993 |
熱環境 根據濕球黑球溫度計（WBGT）指數對操業人員熱負荷的評價 |
Hot environments; Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989) |
| EN 27286-1991 |
電阻焊接設備的圖形符號 |
Graphical symbols for resistance welding equipment (ISO 7286:1986) |
| EN 27326-1993 |
橡膠和塑料軟管 靜態條件下耐臭氧性的評定 |
Rubber and plastics hoses-Assessment of ozone resistance under static conditions (ISO 7326:1991) |
| EN 27389-1990 |
房層建筑 連接件 回彈性的測定 |
Building construction - Jointing products - Determination of elastic recovery (ISO 7389:1987) |
| EN 27390-1990 |
房層建筑 連接件 耐流動性的測定 |
Building construction - Jointing products - Determination of resistance to flow (ISO 7390:1987) |
| EN 274-1-2002 |
衛生器具用廢物裝置 第1部分：要求 |
Waste fittings for sanitary appliances - Part 1: Requirements |
| EN 274-2-2002 |
衛生器具用廢物裝置 第2部分：試驗方法 |
Waste fittings for sanitary appliances - Part 2: Test methods |
| EN 274-3-2002 |
衛生器具用廢物裝置 第3部分：質量控制 |
Waste fittings for sanitary appliances - Part 3: Quality control |
| EN 27418-1993 |
旅游居住車 詞匯 |
Leisure accomodation vehicles; vocabulary (ISO 7418:1989) |
| EN 2743-2001 |
航空航天系列纖維增強塑料測試材料未老化前調理的標準程序 |
Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
| EN 27434-1992 |
開槽錐端緊定螺釘 |
Slotted set screws with cone point (ISO 7434:1983) |
| EN 27435-1992 |
開槽長圓柱端緊定螺釘 |
Slotted set screws with long dog point (ISO 7435:1983) |
| EN 27436-1992 |
開槽凹端緊定螺釘 |
Slotted set screws with cup point (ISO 7436:1983) |
| EN 2744-1992 |
航空航天系列非金屬材料、優選的試驗溫度 |
Aerospace series - Non metallic materials - Preferred test temperature |
| EN 2746-1998 |
航空航天系列玻璃纖維增強塑料彎曲試驗三點彎曲法 |
Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method |
| EN 2747-1998 |
航空航天系列玻璃纖維增強塑料抗拉試驗 |
Aerospace series - Glass fibre reinforced plastics - Tensile test |
| EN 275-1992 |
木材防腐劑 抗水穿孔防護能力的測定 |
Wood preservatives; determination of the protective effectiveness against marine borers |
| EN 2752-1989 |
航空航天系列擴孔軋制系列自鎖固定兩耳系緊螺母等級：1100MPa/235℃ |
Aerospace series; nuts, anchor, self locking fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235℃ |
| EN 27520-1991 |
鎳鐵 鈷含量的測定 火焰原子吸收光譜測定法 |
Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985) |
| EN 27526-1991 |
鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后紅外線吸收法 |
Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985) |
| EN 27527-1991 |
鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后碘量滴定法 |
Nickel, ferronickel and nickel alloys; determination of sulfur content; iodometric titration method after induction furnace combustion (ISO 7527:1985) |
| EN 2753-1996 |
標準號： |
中文標題： |
| EN 27574-1-1988 |
聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第1部分：一般考慮和定義 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1: General considerations and definitions (ISO 7574-1:1985) |
| EN 27574-2-1988 |
聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第2部分：用于單個機械的方法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines (ISO 7574-2:1985) |
| EN 27574-3-1988 |
聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第3部分：用于機組的簡易（傳遞）法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985) |
| EN 27574-4-1988 |
聲學 測定和檢驗機械及設備噪聲標定值的統計方法 第4部分：用于機組的方法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985) |
| EN 27627-1-1993 |
硬質合金 火焰原子吸收光譜法的化學分析 第1部分：一般要求 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 1: general requirements (ISO 7627-1:1983) |
| EN 27627-2-1993 |
硬質合金 火焰原子吸收光譜法的化學分析 第2部分：鈣、鉀、鎂和鈉含量0.001-0.02 %(m/m)的測定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 2: determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983) |
| EN 27627-3-1993 |
硬質合金 火焰原子吸收光譜法的化學分析 第3部分：鈷、鐵、錳和鎳0.01-0.5%( m/m)的測定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 3: determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983) |
| EN 27627-4-1993 |
硬質合金 火焰原子吸收光譜法的化學分析 第4部分：鉬、鈦和釩含量0.01-0.5%( m/m)的測定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 4: determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983) |
| EN 27627-5-1993 |
硬質合金 火焰原子吸收光譜法的化學分析 第5部分：鈷、鐵、鉬、鎳、鈦和釩含量0.5-2%(m/m )的測定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 5: determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983) |
| EN 27627-6-1993 |
硬質合金 火焰原子吸收光譜法的化學分析 第6部分：鉻含量在0.01-2%( m/m)的測定 |
Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 6: determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985) |
| EN 277-1995 |
食品運輸袋 機織聚炳烯織物袋 |
Sacks for the transport of food aid - Sacks made of woven polypropylene fabric |
| EN 27721-1991 |
沉頭螺釘 頭部形狀和測量 |
Countersunk head screws; Head configuration and gauging (ISO 7721:1983) |
| EN 27787-3-1993 |
牙科旋轉器械 切割工具 第3部分：技工室研磨機用質合金刀具 |
Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991) |
| EN 2781-1998 |
航空航天系列非金屬材料結構膠粘劑試驗方法初始厚度的測定 |
Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness |
| EN 27828-1994 |
水質 生物采樣 水生底棲大型無脊椎動物手網采樣方法指南 |
Water quality; Methods of biological sampling; Guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985) |
| EN 27841-1991 |
自動蒸汽疏水閥門 漏氣量的測定 |
Automatic steam traps-Determination of steam loss- Test methods (ISO 7841:1988) |
| EN 27842-1991 |
自動蒸汽疏水閥門 排水量的測定 |
Automatic steam traps- Determination of discharge capacity- Test methods (ISO 7842:1988) |
| EN 27888-1993 |
水質 電導率的測定 |
Water quality; Determination of electrical conductivity (ISO 7888:1985) |
| EN 2790-1991 |
標準號： |
中文標題： |
| EN 2791-1991 |
標準號： |
中文標題： |
| EN 27917-1991 |
聲學 在操作者位置上測量刷鋸發出的空氣聲 |
Acoustics; Measurement at the operators position of airborne noise emitted by brush saws (identical with ISO 7917:1987) |
| EN 2792-1991 |
標準號： |
中文標題： |
| EN 27931-1992 |
電阻焊設備的絕緣帽和套 |
Insulation caps and bushes for resistance welding equipment (ISO 7931:1985) |
| EN 2794-001-1999 |
航空航天系列額定電流20 A 至 50 A單極補償溫度斷路器第001部分：技術規范 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification |
| EN 2794-003-1999 |
航空航天系列額定電流20 A 至 50 A單極補償溫度斷路器第003部分：米制螺紋接線 產品標準 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals - Product standard |
| EN 2794-004-1999 |
航空航天系列額定電流20 A至 50 A單極補償溫度斷路器第004部分：UNC螺紋接線 產品標準 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard |
| EN 27941-1993 |
工業用丙烷和丁烷 氣相色譜分析法 |
Commercial propane and butane; analysis by gas chromatography (ISO 7941:1988) |
| EN 27942-1993 |
信息技術 計算機圖形 圖形核心系統 功能描述 （含1991年修改1） |
Information processing systems; computer graphics - Graphical Kernel Systems (GKS) - Functional description (ISO 7942:1985 including amendment A1:1991) |
| EN 27963-1992 |
鋼件的焊縫 2號超聲波焊接探傷校準塊 |
Welds in steel; calibration block no. 2 for ultrasonic examination of welds (ISO 7963:1985) |
| EN 27965-1-1992 |
包裝 袋 跌落試驗 第1部分：紙袋 |
Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984) |
| EN 280-2001 |
移動升降機工作臺 設計計算、穩定性準則、建造、安全、檢查和試驗 |
Mobile elevating work platforms - Design calculations, stability criteria, construction, safety, examinations and tests |
| EN 280/A1-2004 |
移動升降工作平臺.設計計算.穩定性標準.施工.安全.檢查和試驗 |
|
| EN 28029-1993 |
塑料軟管 通用型可折疊織物增強輸水軟管 規范 |
Plastics hose-General purpose collapsible water hose, textile reinforced-Specification (ISO 8029:1985) |
| EN 28033-1993 |
橡膠和塑料軟管 部件間粘合強度的測定 |
Rubber and plastic hoses-Determination of adhesion between components (ISO 8033:1991) |
| EN 28049-1992 |
鎳鐵丸 分析取樣 |
Ferronickel shot; sampling for analysis (ISO 8049:1988) |
| EN 28050-1992 |
鎳鐵合金錠或塊 分析取樣 |
Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988) |
| EN 2808-1997 |
航空航天系列鈦和鈦合金陽極氧化 |
Aerospace series - Anodizing of titanium and titanium alloys |
| EN 2809-2001 |
航空航天系列耐熱鋼鍍銀帶槽／帶眼扁矮普通對邊六角螺母等級：900 MPa (環境溫度)/650℃ |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 28094-1994 |
鋼絲繩芯輸送機帶 繩芯與涂層間粘合強度試驗 |
Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984) |
| EN 281-1988 |
司機可控制的自驅動工業卡車降落 踏板的建造和設計規則 |
Self-propelled industrial trucks sit-down rider-controlled; rules for the construction and layout of pedals |
| EN 2810-2001 |
航空航天系列耐熱純化鋼帶槽／帶眼扁矮普通對邊六角螺母等級：900 MPa (環境溫度)/650℃ |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 28167-1992 |
電阻焊的凸出部位 |
Projections for resistance welding (ISO 8167:1989) |
| EN 28187-1991 |
家用制冷設備 冷凍冷藏箱 特性和試驗方法 |
Household refrigerating appliances; refrigerator-freezers; characteristics and test methods (ISO 8187:1991) |
| EN 28206-1992 |
氧氣切割機的驗收試驗 重復精度 工作特性 |
Acceptance tests for oxygen cutting machines- Reproducible accuracy- Operational characteristics (ISO 8206:1991) |
| EN 28233-1990 |
熱塑性塑料閥門 扭矩 試驗方法 |
Thermoplastics valves- Torque; test method (ISO 8233:1988) |
| EN 28265-1994 |
水質 淺淡水中多石底層上的底棲大型無脊椎動物定量取樣器的設計和使用 |
Water quality; design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters (ISO 8265:1988) |
| EN 2828-1993 |
航空航天系列用拋光法作金屬涂層的粘附性試驗 |
Aerospace series - Adhesion test for metallic coatings by burnishing |
| EN 2829-1994 |
航空航天系列用噴丸加工法作金屬涂層的粘附性試驗 |
Aerospace series - Adhesion test for metallic coatings by shot peening |
| EN 283-1991 |
交換體 測試 |
Swap bodies; testing |
| EN 2830-1993 |
航空航天系列用剪切法作金屬鍍的粘附性試驗 |
Aerospace series - Adhesion test for metallic coatings by shearing action |
| EN 2831-1993 |
航空航天系列鋼的氫（蝕致）脆性慢速彎曲試驗 |
Aerospace series - Hydrogen embrittlement of steels - Test by slow bending |
| EN 28317-1992 |
防止兒童拆開的包裝 可再次包裝的要求和試驗程序 |
Child-resistant packaging; requirements and testing procedures for reclosable packages (ISO 8317:1989) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com