標準號 |
中文名稱 |
英文名稱 |
| EN ISO 8673-2000 |
六角螺母,1型米制細牙螺紋產品等級A和B級 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999) |
| EN ISO 8674-2000 |
六角螺母,2型米制細牙螺紋產品等級A和B級 |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999) |
| EN ISO 8675-2000 |
六角薄螺母(倒角)米制細牙螺紋產品等級A和B級 |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999) |
| EN ISO 8676-2000 |
米制細牙六角頭螺釘產品等級A和B級 |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999) |
| EN ISO 868-2003 |
塑料與硬質橡膠用硬度計測定壓痕硬度［肖氏(SHORE)硬度］ |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8689-1-2000 |
水質江河中生物的分類第1部分：對底棲微型無脊椎動物調查的生物質量數據的解釋方法指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000) |
| EN ISO 8689-2-2000 |
水質江河中生物的分類第2部分：對底棲微型無脊椎動物調查的生物質量數據的表示方法指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000) |
| EN ISO 8692-2004 |
水質.用單細胞綠藻進行淡水藻類生長抑制性試驗 |
|
| EN ISO 8728-1998 |
船舶與海上技術船用陀羅羅經 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997) |
| EN ISO 8729-1998 |
船舶與海上技術船用雷達反射器 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997) |
| EN ISO 8733-1997 |
不淬硬鋼或奧氏體不銹鋼內螺紋圓柱銷 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997) |
| EN ISO 8734-1997 |
淬硬鋼和馬氏體不銹鋼(定位銷)圓柱銷 |
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
| EN ISO 8735-1997 |
淬硬鋼或馬氏體不銹鋼內螺紋圓柱銷 |
Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997) |
| EN ISO 8739-1997 |
槽銷帶導桿及全長平行溝槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997) |
| EN ISO 8740-1997 |
槽銷帶倒角及全長平行溝槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997) |
| EN ISO 8741-1997 |
槽銷半長倒錐槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997) |
| EN ISO 8742-1997 |
槽銷中部槽長為1/3全長 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997) |
| EN ISO 8743-1997 |
槽銷中部槽長為1/2全長 |
Grooved pins - Half-length centre grooved (ISO 8743:1997) |
| EN ISO 8744-1997 |
槽銷全長錐槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997) |
| EN ISO 8745-1997 |
槽銷半長錐槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997) |
| EN ISO 8746-1997 |
圓頭槽銷 |
Grooved pins with round head (ISO 8746:1997) |
| EN ISO 8747-1997 |
沉頭槽銷 |
Grooved pins with countersunk head (ISO 8747:1997) |
| EN ISO 8748-1997 |
彈性圓柱銷卷制、重型 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997) |
| EN ISO 8750-1997 |
彈性圓柱銷卷制、標準型 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997) |
| EN ISO 8751-1997 |
彈性圓柱銷卷制、輕型 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997) |
| EN ISO 8752-1997 |
彈性圓柱銷開槽、重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997) |
| EN ISO 8754-2003 |
石油產品含硫量的測定非擴散型X－射線熒光光譜法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN ISO 8765-2000 |
米制細牙六角頭螺栓產品等級A和B級 |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) |
| EN ISO 877-1996 |
塑料玻璃板下日光暴曬耐老化及性能測定 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 8780-1-1995 |
顏料和體質顏料評定分散性的分散方法第1部分：綜述 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990) |
| EN ISO 8780-2-1995 |
顏料和體質顏料評定分散性的分散方法第2部分：用振蕩機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990) |
| EN ISO 8780-3-1995 |
顏料和體質顏料評定分散性的分散方法第3部分：用高速粉碎機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990) |
| EN ISO 8780-4-1995 |
顏料和體質顏料評定分散性的分散方法第4部分：用壓研磨機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990) |
| EN ISO 8780-5-1995 |
顏料和體質顏料評定分散性的分散方法第5部分：用自動研磨機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990) |
| EN ISO 8780-6-1995 |
顏料和體質顏料評定分散性的分散方法第6部分：用三轅研磨機分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990) |
| EN ISO 8781-1-1995 |
顏料和體質顏料分散性評定方法第1部分：有色顏料著色力變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990) |
| EN ISO 8781-2-1995 |
顏料和體質顏料分散性評定方法第2部分：磨碎細度變化的評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990) |
| EN ISO 8781-3-1995 |
顏料和體質顏料分散性評定方法第3部分：光澤變化評定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990) |
| EN ISO 8785-1999 |
產品幾何量技術規范（GPS）表面缺陷術語、定義和參數 |
Geometrical product specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
| EN ISO 8795-2001 |
人類生活用水輸送用塑料管道系統遷移評定塑料管道遷移值的測定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001) |
| EN ISO 8799-1995 |
表面活性劑乙氧基化醇和烷基酚硫酸鹽未硫酸化物含量的測定 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988) |
| EN ISO 8819-1995 |
液化石油氣硫化氫的測定乙酸鉛法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993) |
| EN ISO 8826-1-1995 |
技術制圖滾動軸承第1部分：通用簡化畫法 |
Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989) |
| EN ISO 8847-2004 |
小艇.操舵裝置.鋼索和滑輪系統 |
|
| EN ISO 8849-2003 |
小艇 電動直流艙底泵 |
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
| EN ISO 887-2000 |
米制普通螺栓、螺釘和螺母用平墊圈總方案 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) |
| EN ISO 8871-1-2004 |
非腸道及制藥設備用彈性件.第1部分:水蒸汽中的提取物 |
|
| EN ISO 8871-2-2004 |
非腸道及制藥設備用彈性件.第2部分:識別和表征 |
|
| EN ISO 8871-3-2004 |
非腸道及制藥設備用彈性件.第3部分:釋放粒子計數的測定 |
|
| EN ISO 8872-2003 |
輸血、輸液和注射瓶鋁蓋 一般要求和試驗方法 |
Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003) |
| EN ISO 8891-2000 |
貴金屬含量至少為25%但不低于75%的牙科用鑄造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998) |
| EN ISO 8892-1995 |
油料餅粕殘留已烷總量的測定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987) |
| EN ISO 8968-1-2001 |
牛奶含氮量的測定第1部分：凱氏法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001) |
| EN ISO 8968-2-2001 |
牛奶含氮量的測定第2部分：分段溶解法(宏觀法) |
Milk - Determination of nitrogen content - Part 2: Block digestion method (Macro method) (ISO 8968-2:2001) |
| EN ISO 8968-4-2001 |
牛奶含氮量的測定第4部分：非蛋白質氮含量的測定 |
Milk - Determination of nitrogen content - Part 4: Determination of non-protein nitrogen content (ISO 8968-4:2001) |
| EN ISO 8968-5-2001 |
牛奶含氮量的測定第5部分：蛋白質氮含量的測定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001) |
| EN ISO 8973-1999 |
液化石油氣密度和蒸氣壓的計算 |
Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997) |
| EN ISO 8974-2002 |
塑料酚醛樹脂用氣體色譜法測定殘余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002) |
| EN ISO 8975-1995 |
塑料酚醛樹脂pH值的測定 |
Plastics - Phenolic resins - Determination of pH (ISO 8975:1989) |
| EN ISO 898-1-1999 |
碳鋼和鑄鋼鑄造的緊固件機械性能第1部分：螺栓、螺釘和螺柱 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999) |
| EN ISO 898-5-1998 |
碳鋼和鑄鋼鑄造的緊固件機械性能第5部分：緊定螺釘及類似的不受拉應力的螺紋緊固件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998) |
| EN ISO 898-6-1995 |
緊固件機械性能第6部分：規定保證載荷值的螺母 細牙螺紋 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
| EN ISO 8980-1-1997 |
眼科光學未切邊成品眼鏡片第1部分：單焦點和多焦點鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996) |
| EN ISO 8980-1-2004 |
眼科光學.未切邊成品眼鏡片.第1部分:單焦點和多焦點鏡片規范 |
|
| EN ISO 8980-2-1997 |
眼科光學未切邊成品眼鏡片第2部分：漸變焦鏡片規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996) |
| EN ISO 8980-2-2004 |
眼科光學.未切邊成品眼鏡片.第2部分:漸變焦眼鏡片規范 |
|
| EN ISO 8980-3-1999 |
眼科光學未切邊成品眼鏡片第3部分：透光性規范和試驗方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999) |
| EN ISO 8980-4-2000 |
眼科光學未切邊成品眼鏡片第4部分：防反射涂層的試驗方法和規范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000) |
| EN ISO 8985-1998 |
塑料乙烯／乙酸乙烯共聚物(EVAC)熱塑塑料乙酸乙烯含量的測定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998) |
| EN ISO 8986-1-1999 |
塑料聚丁烯模塑和擠塑材料第1部分：命名體系和基本規范 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993) |
| EN ISO 8987-1998 |
塑料酚醛樹脂在Ｂ轉變試驗板上的活化性能的測定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995) |
| EN ISO 8988-1997 |
塑料酚醛樹脂六次甲基四胺含量的測定凱氏法和過氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995) |
| EN ISO 8989-1998 |
塑料液態酚醛樹脂水溶物的測定 |
Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995) |
| EN ISO 899-1-2003 |
塑料 蠕變的測定 第1部分：拉伸蠕變 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003) |
| EN ISO 899-2-2003 |
塑料 蠕變的測定 第2部分：用三點負載測定擾屈蠕變 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003) |
| EN ISO 8990-1996 |
絕熱穩態傳熱性質的測定校準和防護熱箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994) |
| EN ISO 8996-2004 |
熱環境的人類工效學.代謝率的測定 |
|
| EN ISO 90-1-1999 |
薄壁金屬容器尺寸、容量的定義和測定第1部分：頂開罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
| EN ISO 90-2-1999 |
薄壁金屬容器尺寸、容量的定義和測定第2部分：一般用途的容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997) |
| EN ISO 90-3-2001 |
薄壁金屬容器尺寸、容量的定義和測定第3部分：噴霧罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000) |
| EN ISO 9000-2000 |
質量管理體系基礎和詞匯 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000) |
| EN ISO 9000-3-1997 |
質量管理和質量保證標準第3部分：ISO 9001-1994計算機軟件的開發、供應、安裝和維護應用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997) |
| EN ISO 9001-2000 |
質量管理體系要求 |
Quality management systems - Requirements (ISO 9001:2000) |
| EN ISO 9004-2000 |
質量管理體系業績改進指南 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000) |
| EN ISO 9013-2002 |
熱切割 熱切割分類產品幾何量規范和質量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002) |
| EN ISO 9020-1998 |
色漆和清漆用粘合劑胺類樹脂的游離甲醛含量的測定亞硫酸鈉滴定法 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996) |
| EN ISO 9029-1995 |
原油水分的測定蒸餾法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990) |
| EN ISO 9047-2003 |
房屋建筑密封膠變溫下的粘合性能的測定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) |
| EN ISO 9054-1999 |
硬質泡沫塑料自結皮高密度材料的試驗方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990) |
| EN ISO 9073-2-1996 |
紡織品非織造布試驗方法第2部分：厚度的測定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995) |
| EN ISO 9073-4-1997 |
紡織品非織造布試驗方法第4部分：抗撕裂的測定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| EN ISO 9073-6-2003 |
紡織品非織造布試驗方法第6部分：吸水性(注解：認可通知) |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
| EN ISO 9073-7-1998 |
紡織品非織造布試驗方法第7部分：彎曲長度的測定 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) |
| EN ISO 9073-8-1998 |
紡織品非織造布試驗方法第8部分：液體滲透時間的測定(模擬尿) |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9073-9-1998 |
紡織品非織造布試驗方法第9部分：懸垂系數的測定 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995) |
| EN ISO 9080-2003 |
塑料管與管道系統用推斷法測定熱塑管型材料長期流動液體靜力強度 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003) |
| EN ISO 9093-1-1997 |
小艇通海旋塞及貫穿艇體配件第1部分：金屬的配件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
| EN ISO 9093-2-2002 |
小艇通海旋塞及貫穿艇體配件第2部分：非金屬的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
| EN ISO 9094-1-2003 |
小艇防火第1部分：船長≤15米的小艇 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) |
| EN ISO 9094-2-2002 |
小艇防火第2部分：船長〈15米的小艇 |
Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002) |
| EN ISO 9163-1998 |
紡織玻璃纖維粗紗試樣的制備和浸漬粗紗拉伸強度的測定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996) |
| EN ISO 9167-1-1995 |
菜籽芥子油工甙含量的測定第1部分：高效液相色譜法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performamce liquid chromatography (ISO 9167-1:1992) |
| EN ISO 9167-2-1997 |
菜籽芥子油工甙含量的測定第2部分：用X－射線熒光光譜法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994) |
| EN ISO 9173-1-1995 |
拔牙鉗第1部分：螺釘和鉸鏈接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| EN ISO 9187-1-2003 |
醫用注射器具第1部分：注射安瓿 |
Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2000) |
| EN ISO 9220-1994 |
金屬覆蓋層鍍層厚度測量掃描電子顯微鏡法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 9222-1-1995 |
技術制圖動密封應用第1部分：通用簡化畫法 |
Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989) |
| EN ISO 9222-2-1994 |
技術制圖動密封應用第2部分：簡化畫法 |
Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989) |
| EN ISO 9237-1995 |
紡織品織物透氣性的測定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN ISO 9239-1-2002 |
地板對火反應試驗第1部分：使用單輻射熱源的火焰性能測定 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002) |
| EN ISO 9241-10-1996 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第10部分：對話原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996) |
| EN ISO 9241-11-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第11部分：可用性指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
| EN ISO 9241-12-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第12部分：信息表達 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) |
| EN ISO 9241-13-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第13部分：用戶指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998) |
| EN ISO 9241-14-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第14部分：菜單對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997) |
| EN ISO 9241-15-1997 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第15部分：命令對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
| EN ISO 9241-16-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第16部分：直接處理對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999) |
| EN ISO 9241-17-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第17部分：填表對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998) |
| EN ISO 9241-5-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第5部分：工作臺布置及位置要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
| EN ISO 9241-6-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第6部分：工作環境指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com