標準號 |
中文名稱 |
英文名稱 |
| EN 901-1999 |
人類用水處理用的化學制品 次氯酸鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite |
| EN 902-1999 |
人類用水處理用的化學制品 過氧化氫 |
Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide |
| EN 903-1993 |
水質 用測量亞甲基蘭指數MBAS測定離子表面活化劑（ISO 7875-1-1984，修改） |
Water quality; Determination of anionic surfactants by measurement of the methylene blue index MBAS (ISO 7875-1:1984, modified) |
| EN 906-1996 |
農用聚烯烴繩 |
Polyolefin agricultural twines |
| EN 907-1997 |
農業和林業機械 噴霧器和液體肥料噴灑器 安全 |
Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Safety |
| EN 908-1999 |
農業和林業機械 灌溉用卷軸機 安全 |
Agricultural and forestry machinery - Reel machines for irrigation - Safety |
| EN 909-1998 |
農業和林業機械 中心軸和移動側面型灌溉機器 安全 |
Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety |
| EN 910-1996 |
金屬材料焊接的破壞試驗 彎曲試驗 |
Destructive tests on welds in metallic materials - Bend tests |
| EN 9100-2003 |
航空航天系列質量管理體系要求和質量體系設計、開發、生產、安裝和服務質量保證的模型 |
Aerospace series - Quality management systems; Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) |
| EN 911-1995 |
塑料管道系統 熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭 外部液壓條件下防漏密封試驗方法 |
Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
| EN 913-1996 |
體操器材 一般安全要求和試驗方法 |
Gymnastic equipment - General safety requirements and test methods |
| EN 914-1996 |
體操器材 雙杠和組合式高低杠 功能及安全要求、試驗方法 |
Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Functional and safety requirements, test methods |
| EN 915-1996 |
體操器材 高低杠 功能及安全要求、試驗方法 |
Gymnastic equipment - Asymmetric bars - Functional and safety requirements, test methods |
| EN 916-2003 |
體操器材 鞍馬 要求和試驗方法(包括安全) |
Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety |
| EN 917-1997 |
塑料管系統 熱塑閥門 抗內壓和泄漏密封性的試驗方法 |
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness |
| EN 918-1995 |
土工織物和土工織物相關產品 動力穿孔試驗（落錐試驗） |
Geotextiles and geotextile-related products - Dynamic perforation test (cone drop test) |
| EN 919-1995 |
一般用途纖維繩索 某些物理和力學性能的測定 |
Fibre ropes for general service - Determination of certain physical and mechanical properties |
| EN 920-2000 |
用于接觸食品的紙和紙板 水提出物中干性物質含量的測定 |
Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract |
| EN 922-1994 |
塑料管和管道系統 未增塑聚氯乙烯管道和配件 粘度值測定和K值計算的樣品準備 |
Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value |
| EN 923-1998 |
粘合劑 術語和定義 |
Adhesives - Terms and definitions |
| EN 924-2003 |
粘合劑 含溶劑和無溶劑粘合劑 閃點的測定 |
Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
| EN 926-1-1995 |
滑翔降落設備 滑翔傘 第1部分：結構強度的要求和試驗方法 |
Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength |
| EN 927-1-1996 |
涂料和清漆 木材外部的涂覆材料和涂覆系統 第1部分：分類及選擇 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection |
| EN 927-3-2000 |
涂料和清漆 木材外部的涂覆材料和涂覆系統 第3部分：自然氣候試驗 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN 927-4-2000 |
涂料和清漆 木材外部的涂覆材料和涂覆系統 第4部分：水蒸汽滲透性評估 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 4: Assessment of the water-vapour permeability |
| EN 927-5-2000 |
涂料和清漆 木材外部的涂覆材料和涂覆系統 第5部分：液態水滲透性評估 |
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
| EN 928-1995 |
玻璃試管診斷系統 關于玻璃試管診斷醫療設備的EN 29001、EN 46001、EN 29002、EN 46002的應用指南 |
In vitro diagnostic systems - Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices |
| EN 929-1993 |
內河航行船舶 推拖船 可卸信號桅桿用安裝附件 |
Inland navigation vessels - Push-tows - Mounting attachment for demountable signal masts |
| EN 930-1997 |
鞋、皮革和仿皮革產品制造機械 固定、刷洗、上光和整理機械 安全要求 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
| EN 930/prA1-2001 |
鞋、皮革和仿皮革產品制造機械 固定、刷洗、上光和整理機械 安全要求 修改A1 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements; Amendment A1 |
| EN 931-1997 |
鞋制造機械 拉伸機械 安全要求 |
Footwear manufacturing machines - Lasting machines - Safety requirements |
| EN 931/prA1-2001 |
鞋制造機械 拉伸機械 安全要求 修改A1 |
Footwear manufacturing machines - Lasting machines - Safety requirements; Amendment A1 |
| EN 932-1-1996 |
集料的一般性能試驗 第1部分：抽樣方法 |
Tests for general properties of aggregates - Part 1: Methods for sampling |
| EN 932-2-1999 |
集料的一般性能試驗 第2部分：減少試驗室樣本的方法 |
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| EN 932-5-1999 |
集料的一般性能試驗 第5部分：普通設備和校準 |
Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| EN 932-6-1999 |
集料的一般性能試驗 第6部分：可重復性和可再生性定義 |
Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility |
| EN 933-1-1997 |
集料的幾何性能試驗 第1部分：粒度分布測定 篩分法 |
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 933-10-2001 |
集料的幾何性能試驗 第10部分：細屑評估 漏斗等級（空氣噴射篩分） |
Tests for geometrical properties of aggregates - Part 10: Assessment of fines; Grading of fillers (air jet sieving) |
| EN 933-2-1995 |
集料的幾何性能試驗 第2部分：粒子大小分布的測定 篩分試驗、小孔的標稱尺寸 |
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures |
| EN 933-4-1999 |
集料的幾何性能試驗 第4部分：粒子形狀的測定 形狀指數 |
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| EN 933-5-1998 |
集料的幾何性能試驗 第5部分：粗糙粒子集合中表面碎裂百分率測定 |
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles |
| EN 933-5-2004 |
集料幾何性能的試驗.第5部分:粗集料中破損顆粒所占比例的測定 |
|
| EN 933-6-2001 |
集料的幾何性能試驗 第6部分：表面特性的評估 集料的流量系數 |
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics; Flow coefficient of aggregates |
| EN 933-7-1998 |
集料的幾何性能試驗 第7部分：殼含量測定 粗集料中殼的百分率 |
Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates |
| EN 933-8-1999 |
集料的幾何性能試驗 第8部分：細屑評估 沙當量試驗 |
Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| EN 933-9-1998 |
集料的幾何性能試驗 第9部分：細屑評估 亞甲藍試驗 |
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 934-2-2001 |
混凝土、灰泥和水泥的添加劑 第2部分：混凝土添加劑 定義、要求、一致性、標志和標簽 |
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures; Definitions, requirements, conformity, marking and labelling |
| EN 934-2/A1-2004 |
混凝土、灰漿和灌漿用添加劑.混凝土添加劑.第2部分:定義、要求、合格性、標記和標簽 |
|
| EN 934-4-2001 |
混凝土、灰泥和水泥的添加劑 第4部分：預應力鋼筋用水泥的添加劑 定義、要求、一致性、標志和標簽 |
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons; Definitions, requirements, conformity, marking and labelling |
| EN 934-4/A1-2004 |
混凝土、灰漿和灌漿用添加劑.預應力鋼筋束用灌漿添加劑.第4部分:定義、要求、合格性、標記和標簽 |
|
| EN 934-6-2001 |
混凝土、灰泥和水泥的添加劑 第6部分：取樣、一致性控制和一致性評估 |
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity |
| EN 935-2001 |
人類用水處理用的化學制品 氯化鋁鐵（III）（單體）和氯化烴鋁鐵（III）（單體） |
Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric) |
| EN 936-1997 |
人類用水處理用的化學制品 二氧化碳 |
Chemicals used for treatment of water intended for human consumption - Carbone dioxide |
| EN 937-1999 |
人類用水處理用的化學制品 氯 |
Chemicals used for treatment of water intended for human consumption - Chlorine |
| EN 938-1999 |
人類用水處理用的化學制品 亞氯酸鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium chlorite |
| EN 939-1999 |
人類用水處理用的化學制品 鹽酸 |
Chemicals used for treatment of water intended for human consumption - Hydrochloric acid |
| EN 941-1995 |
鋁和鋁合金 一般應用的圓形和圓形原料 規范 |
Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications |
| EN 942-1996 |
細木工用木材 木材質量的一般分類 |
Timber in joinery - General classification of timber quality |
| EN 943-1-2002 |
防液態和氣態化學制品（包括液態懸浮顆粒和固體顆粒）的防護服 第1部分：通風和不通風不透氣（1型）和透氣 |
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated gas-tight (Type 1) and non-gas-tight (Type 2) chemical protective suits |
| EN 943-2-2002 |
防液態和氣態化學制品（包括液態懸浮顆粒和固體顆粒）的防護服 第2部分：緊急事件隊（ET）用不透氣（1型） |
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET) |
| EN 947-1998 |
鉸鏈門或樞軸門 抗垂直負載的測定 |
Hinged or pivoted doors - Determination of the resistance to vertical load |
| EN 948-1999 |
鉸鏈門或樞軸門 耐靜力扭轉的測定 |
Hinged or pivoted doors - Determination of the resistance to static torsion |
| EN 949-1998 |
窗和窗簾墻、門、遮簾和百葉窗 軟和重物體撞擊門的抗力的測定 |
Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors |
| EN 950-1999 |
門合頁 硬物體沖擊的抗力的測定 |
Door leaves - Determination of the resistance to hard body impact |
| EN 951-1998 |
門合頁 高度、寬度、厚度和面積的測量方法 |
Door leaves - Method for measurement of height, width, thickness and squareness |
| EN 952-1999 |
門合頁 總的和局部平整度 測量方法 |
Door leaves - General and local flatness - Measurement method |
| EN 953-1997 |
機械安全 防護裝置 固定和移動防護裝置構造和設計的一般要求 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 954-1-1996 |
機械安全 控制系統部件的安全 第1部分：設計的一般原則 |
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design |
| EN 955-2-1995 |
耐熔產品的化學分析 第2部分：含有硅和/或鋁的產品（濕分析法） |
Chemical analysis of refractory products - Part 2: Products containing silica and/or alumina (wet method) |
| EN 957-2-2003 |
固定的訓練器材 第2部分：體力訓練器材 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods |
| EN 957-4-1996 |
固定的訓練器材 第4部分：體力訓練長椅 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods |
| EN 957-5-1996 |
固定的訓練器材 第5部分：踏板轉動訓練器材 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods |
| EN 957-6-2001 |
固定的訓練器材 第6部分：踏車 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods |
| EN 957-7-1998 |
固定的訓練器材 第7部分：劃艇機械 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods |
| EN 957-8-1998 |
固定的訓練器材 第8部分：跑步機、踏步器和登山器 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods |
| EN 957-9-2003 |
固定的訓練器材 第9部分：橢圓形教練器 附加的特殊安全要求和試驗方法 |
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods |
| EN 958-1996 |
登山設備 Klettersteig攀登用能量吸收系統 安全要求和試驗方法 |
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods |
| EN 959-1996 |
登山設備 巖石錨栓 安全要求和試驗方法 |
Mountaineering equipment - Rock anchors - Safety requirements and test methods |
| EN 963-1995 |
土工織物及其相關產品 試樣的取樣和準備 |
Geotextiles and geotextile-related products - Sampling and preparation of test specimens |
| EN 964-1-1995 |
土工織物及其相關產品 特定壓力下厚度的測定 第1部分：單層 |
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 1: Single layers |
| EN 965-1995 |
土工織物及其相關產品 單位面積質量的測定 |
Geotextiles and geotextile-related products - Determination of mass per unit area |
| EN 966-1996 |
航空運動的頭盔 |
Helmets for airborne sports / Note: To be amended by EN 966/prA2 (2003-10) (in preparation). |
| EN 970-1997 |
熔焊的非損檢測 視覺檢查 |
Non-destructive examination of fusion welds - Visual examination |
| EN 971-1-1996 |
色漆和清漆 涂層材料的術語和定義 第1部分：一般術語 |
Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms |
| EN 972-1998 |
制革機械 往復滾柱機械 安全要求 |
Tannery machines - Reciprocating roller machines - Safety requirements |
| EN 973-2002 |
人類用水處理用化學制品 離子交換再生用氯化鈉 |
Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers |
| EN 974-1997 |
人類用水處理用化學制品 磷酸 |
Chemical used for treatment of water intended for human consumption - Phosphoric acid |
| EN 975-2-2004 |
成材.硬木按表觀分類.第2部分:白楊木 |
|
| EN 976-1-1997 |
玻璃增強塑料地下貯罐 非壓力存儲液體石油燃料水平園柱狀水箱 第1部分：單壁水箱試驗方法和要求 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
| EN 976-2-1997 |
玻璃增強塑料地下貯罐 非壓力存儲液體石油燃料水平園柱狀貯罐 第2部分：單壁貯罐的運輸、儲存、操作和安 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks |
| EN 977-1997 |
玻璃增強塑料地下貯罐 單側液流法 |
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
| EN 980-2003 |
醫療器械標簽用圖形符號 |
Graphical symbols for use in the labelling of medical devices |
| EN 981-1996 |
機械安全 危險信號的視聽系統 |
Safety of machinery - System of auditory and visual danger and information signals |
| EN 982-1996 |
機械的安全 流體動力系統及其件的安全要求 液壓裝置 |
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 983-1996 |
機械安全 流體動力系統及其件的安全要求 氣壓裝置 |
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 984-2001 |
織物地面覆蓋物 針刺地面覆蓋物使用表面的單位面積質量的測定 |
Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings |
| EN 985-2001 |
織物地面覆蓋物 小腳輪椅子試驗 |
Textile floor coverings - Castor chair test |
| EN 986-1995 |
織物地面覆蓋物 瓷磚 因水、溫度條件改變和平面變形引起的尺寸變化的測定 |
Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
| EN 988-1996 |
鋅和鋅合金 建筑用軋制板材規范 |
Zinc and zinc alloys - Specifications for rolled flat products for building |
| EN 989-1995 |
擠壓試驗方法測定熱壓充氣混凝土和加強筋間膠合力的性能 |
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the push-out test |
| EN 990-2002 |
熱壓充氣混凝土和多孔結構輕質集料混凝土中鋼筋防蝕檢驗的試驗方法 |
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure |
| EN 991-1995 |
用熱壓充氣混凝土或多孔結構輕質集料混凝土制成的預制鋼筋構件的尺寸測定 |
Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 992-1995 |
多孔結構輕質集料混凝土干密度的測定 |
Determination of the dry density of lightweight aggregate concrete with open structure |
| EN 993-1-1995 |
成形致密耐火制品的試驗方法 第1部分：松裝密度、表觀孔隙度和實際孔隙度的測定 |
Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity |
| EN 993-10-1997 |
成形致密耐火制品的試驗方法 第10部分：加熱時尺寸永久變化的測定 |
Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating |
| EN 993-12-1997 |
成形致密耐火制品的試驗方法 第12部分：測溫錐當量測定（耐火性） |
Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness) |
| EN 993-13-1995 |
成形致密耐火制品的檢驗方法 第13部分：試驗室用參考測溫錐的規范 |
Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use |
| EN 993-14-1998 |
成形致密耐火制品的測試方法 第14部分：用熱線法（十字排列）測定熱導率 |
Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method |
| EN 993-15-1998 |
成形致密耐火制品的試驗方法 第15部分：用熱線法（平行）測定熱導率 |
Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method |
| EN 993-16-1995 |
成形致密耐火制品 第16部分：耐硫酸腐蝕性的測定 |
Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid |
| EN 993-17-1998 |
成形致密耐火制品的試驗方法 第17部分：真空汞法對顆粒狀材料松裝密度的測定 |
Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum |
| EN 993-18-2002 |
成形致密耐火制品的試驗方法 第18部分：真空水法對顆粒狀材料松裝密度的測定 |
Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum |
| EN 993-19-2004 |
致密成型耐火制品檢驗方法.第19部分:由差動法測定熱膨脹性 |
|
| EN 993-2-1995 |
成形致密耐火制品的試驗方法 第2部分：真密度測定 |
Methods of test for dense shaped refractory products - Part 2: Determination of true density |
| EN 993-20-2004 |
致密成型耐火制品檢驗方法.第20部分:環境溫度下抗磨性的測定 |
|
| EN 993-3-1997 |
成形致密耐火制品的試驗方法 第3部分：含碳制品的試驗方法 |
Methods of test for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories |
| EN 993-4-1995 |
成形致密耐火制品的試驗方法 第4部分：氣體滲透性測定 |
Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases |
| EN 993-5-1998 |
成形致密耐火制品的試驗方法 第5部分：冷擠壓強度的測定 |
Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength |
| EN 993-6-1995 |
成形致密耐火制品的試驗方法 第6部分：周圍溫度下斷裂模數的測定 |
Methods of test for dense shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature |
| EN 993-7-1998 |
成形致密耐火制品的試驗方法 第7部分：升溫時斷裂模數的測定 |
Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com