標準號 |
中文名稱 |
英文名稱 |
| EN 61212-3-3-1995 |
電工用熱固性樹脂工業硬質圓形層壓管和棒第3部分：單項材料規范活頁3：圓形層壓模制棒 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995) |
| EN 61213-1994 |
錄像帶的模擬聲音錄制磁化極性 |
Analogue audio recording on video tape-Polarity of magnetization (IEC 61213:1993) |
| EN 61215-1995 |
地面用晶體硅光伏組件設計鑒定和定型 |
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61215:1993) |
| EN 61219-1993 |
帶電作業 用掛桿作為短路裝置的接地或接地并短路設備掛桿接地 |
Live working; earthing or earthing and short-circuiting equipment using lances as a short-circuiting device; lance earthing (IEC 61219:1993) |
| EN 61220-1995 |
超聲學聲場0.5MHz至15MHz頻率范圍內用水聽器測量和表征醫療超聲設備產生的超聲場的指南 |
Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 61220:1993) |
| EN 61221-1995 |
石油產品和潤滑劑三方基磷酸酯渦輪機控制液規范 |
Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993) |
| EN 61223-2-4-1994 |
醫用成像部門的評定及例行試驗第2-4部分：穩定性試驗硬考貝照相機 |
Evaluation and routine testing in medical imaging departments - Part 2-4: Constancy tests - Hard copy cameras (IEC 61223-2-4:1994) |
| EN 61223-2-5-1994 |
醫用成像部門的評定及例行試驗第2-5部分：穩定性試驗圖像顯示裝置 |
Evaluation and routine testing in medical imaging departments - Part 2-5: Constancy tests - Image display devices (IEC 61223-2-5:1994) |
| EN 61223-2-6-1994 |
醫用成像部門的評定及例行試驗第2-6部分：穩定性試驗經過計算的斷層攝影X-射線設備 |
Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - X-ray equipment for computed tomography (IEC 61223-2-6:1994) |
| EN 61223-3-1-1999 |
醫用成像部門的評定及例行試驗第3-1部分：驗收試驗X-射線攝影和X射線透視設備的圖像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999) |
| EN 61223-3-2-1996 |
醫用成像部門的評定及例行試驗第3-2部分：驗收試驗乳腺攝影X-射線設備圖像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996) |
| EN 61223-3-3-1996 |
醫用成像部門的評定及例行試驗第3-3部分：驗收試驗數字減影血管造影X-射線設備的圖像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3:1996) |
| EN 61223-3-4-2000 |
醫用成像部門的評定及例行試驗第3-4部分：驗收試驗牙科X射線設備的圖像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance test- Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000) |
| EN 61234-1-1994 |
電氣絕緣材料水解穩定性的試驗方法第1部分：塑料薄膜 |
Method of test for the hydrolytic stability of electrical insulating materials- |
| EN 61234-2-1998 |
電氣絕緣材料水解穩定性的試驗方法第2部分：模塑熱固性材料 |
Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-2:1997) |
| EN 61235-1995 |
帶電作業電工用絕緣空心管 |
Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified) |
| EN 61236-1995 |
帶電作業用滑動座架、硬梯及附件 |
Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified) |
| EN 61237-1-1994 |
廣播磁帶錄像機測量方法第1部分：機械測量 |
Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements (IEC 61237-1:1994) |
| EN 61237-2-1995 |
廣播磁帶錄像機測量方法第2部分：模擬復合視頻信號的電氣測量 |
Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements of analogue composite video signals (IEC 61237-2:1995) |
| EN 61237-3-1995 |
廣播磁帶錄像機測量方法第3部分：模擬部件視頻信號的電氣測量 |
Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals (IEC 61237-3:1995) |
| EN 61237-4-1997 |
廣播磁帶錄像機測量方法第4部分：模擬音頻性能測量 |
Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements (IEC 61237-4:1997) |
| EN 61238-1-2003 |
標準號： |
中文標題： |
| EN 61240-1997 |
壓電器件頻率控制和選擇用表面安裝器件外形圖制備總則 |
Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules (IEC 61240:1994) |
| EN 61241-1-2004 |
有可燃性粉塵場合用電氣設備.第1部分:外殼防護tD型 |
|
| EN 61241-14-2004 |
有可燃性粉塵場合用電氣設備.第14部分:選擇和安裝 |
|
| EN 61241-18-2004 |
有可燃性粉塵場合用電氣設備.第18部分:封裝mD型防護設備 |
|
| EN 61241-2-2-1995 |
有可燃性粉塵場合用電氣設備第2部分：試驗方法第2節：粉塵層電阻率的測定方法 |
Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994) |
| EN 61242-1997 |
電氣附件家用和類似用途卷線盤 |
Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified) |
| EN 61242-2004 |
電氣附件.家用和類似用途卷線盤 |
|
| EN 61242/prA11-2002 |
電氣附件家用和類似用途卷線盤修改A11 |
Electrical accessories - Cable reels for household and similar purposes; Amendment A11 |
| EN 61243-3-1998 |
帶電作業電壓檢測器第3部分：兩極低壓型 |
Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998) / Note: Includes Corrigendum of February 2002 |
| EN 61243-5-2001 |
帶電作業電壓檢測器第5部分：電壓檢測系統 |
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) (IEC 61243-5:1997, modified) |
| EN 61247-1997 |
磁性氧化物制PM磁芯及相關部件尺寸 |
PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995) |
| EN 61248-1-1997 |
電子和電信設備用變壓器和電感器第1部分：通用規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996) |
| EN 61248-2-1997 |
電子和電信設備用變壓器和電感器第2部分：采用能力批準程序的信號變壓器分規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996) |
| EN 61248-3-1997 |
電子和電信設備用變壓器和電感器第3部分：采用能力批準程序的電源變壓器分規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996) |
| EN 61248-4-1997 |
電子和電信設備用變壓器和電感器第4部分：采用能力批準程序的轉換供電方式(SMPS)的開關電源變壓器分規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996) |
| EN 61248-5-1997 |
電子和電信設備用變壓器和電感器第5部分：采用能力批準程序的脈沖變壓器分規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996) |
| EN 61248-6-1997 |
電子和電信設備用變壓器和電感器第6部分：采用能力批準程序的電感器分規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996) |
| EN 61248-7-1997 |
電子和電信設備用變壓器和電感器第7部分：采用能力批準程序的高頻電感器和中頻變壓器分規范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1997) |
| EN 61249-2-10-2003 |
印制板和其它互連結構用材料第2-10部分：包被和非包被增強基材阻燃型銅包被的氰酸酯、溴化環氧改進型或 |
Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad; Cyanate ester, brominated epoxide modified or unmodified woven E-glass reinforced laminated sheets of defined flammability (vertica |
| EN 61249-2-12-1999 |
印制板和其它互連結構材料第2-12部分：包被和非包被增強基材分規范集阻燃型銅包被的非編織芳香聚酰胺層 |
Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-12:1999) |
| EN 61249-2-13-1999 |
印制板和其它互連結構材料第2-13部分：包被和非包被增強基材分規范集阻燃性銅包被的非編織芳香聚酰胺層 |
Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-13:1999) |
| EN 61249-2-18-2002 |
印制板和其它互連結構材料第2-18部分：包被和非包被增強基材阻燃型(垂直燃燒試驗)銅包被的非編織玻璃 |
Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad; Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2 |
| EN 61249-2-19-2002 |
印制板和其它互連結構用材料第2-19部分：包被和非包被增強基材阻燃型(垂直燃燒試驗)銅包被的交叉簾布 |
Materials for printed boards and other interconnection structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheet of defined flammability (vertical burning test), copper-clad (IEC |
| EN 61249-2-4-2002 |
印制板和其它互連結構用材料第2-4部分：包被和非包被增強基材阻燃型(垂直燃燒試驗)銅包被的聚酯非編織/ |
Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-woven/woven fiberglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-4:200 |
| EN 61249-2-7-2002 |
印制板和其它互連結構用材料第2-7部分：包被和非包被增強基材阻燃型(垂直燃燒試驗)銅包被的編織E-玻璃 |
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad; Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-7:2002) / Note: Endor |
| EN 61249-2-8-2003 |
印制板和其它互連結構用材料第2-8部分：包被和非包被增強基材阻燃銅包被改進型溴化環氧編織玻璃纖維增 |
Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad; Modified brominated epoxide woven fiberglass reinforced laminated sheets of defined flammability (vertical burning test), copper-cla |
| EN 61249-2-9-2003 |
印制板和其它互連結構用材料第2-9部分：包被和非包被增強基材阻燃銅包被二順丁烯二酰亞胺/三連氮改進型 |
Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad; Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical bu |
| EN 61249-3-3-1999 |
印制板和其它互連結構材料第3-3部分：包被和非包被非增強基材分規范集粘著的涂覆撓性聚酯薄膜 |
Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film (IEC 61249-3-3:1999 |
| EN 61249-3-4-1999 |
印制板和其它互連結構材料第3-4部分：包被和非包被非增強基材分規范集粘著的涂覆撓性聚酰亞胺薄膜 |
Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film (IEC 61249-3-4:1999 |
| EN 61249-3-5-1999 |
印制板和其它互連結構材料第3-5部分：包被和非包被非增強基材分規范集轉換粘性薄膜 |
Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films (IEC 61249-3-5:1999) |
| EN 61249-5-1-1996 |
互連結構用材料第5部分：有和無涂層的導電箔和薄膜分規范集第1節：銅箔(用于生產覆銅基材) |
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995) |
| EN 61249-5-4-1996 |
互連結構用材料第5部分：有或無涂層的導電箔和薄膜分規范集第4節：導電油墨 |
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks (IEC 61249-5-4:1996) |
| EN 61249-7-1-1995 |
互連結構用材料第7部分：增強芯材料分規范集第1節：銅/因瓦/銅 |
Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/Invar/copper (IEC 61249-7-1:1995) |
| EN 61249-8-7-1996 |
互連結構用材料第8部分：非導電薄膜和涂層分規范集第7節：打印油墨 |
Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks (IEC 61249-8-7:1996) |
| EN 61249-8-8-1997 |
互連結構用材料第8部分：非導電薄膜和涂層分規范集第8節：非永久高聚物涂層 |
Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings (IEC 61249-8-8:1997) |
| EN 61254-1994 |
家用電動剃須刀性能測試方法 |
Electric shavers for household use; methods for measuring the performance (IEC 61254:1993) |
| EN 61255-1994 |
家用電熱墊性能測量方法 |
Household electric heating pads - Methods for measuring performance (IEC 61255:1994) |
| EN 61260-1995 |
電聲學分倍頻程和頻程頻帶濾波器 |
Electroacoustics - Octave-band and fractional-octave-band filters (IEC 61260:1995) |
| EN 61262-1-1994 |
醫療電氣設備光電X-射線影像增強器特性第1部分：入射野的測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size (IEC 61262-1:1994) |
| EN 61262-2-1994 |
醫療電氣設備光電X-射線影像增強器特性第2部分：換算因子的測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor (IEC 61262-2:1994) |
| EN 61262-3-1994 |
醫療電氣設備光電X-射線影像增強器特性第3部分：亮度分布及非均勻性測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994) |
| EN 61262-4-1994 |
醫療電氣設備光電X-射線影像增強器特性第4部分：影像畸變的測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion (IEC 61262-4:1994) |
| EN 61262-5-1994 |
醫療電氣設備光電X-射線影像增強器特性第5部分：次量子系統的測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994) |
| EN 61262-6-1994 |
醫療電氣設備光電X-射線影像增強器特性第6部分：對比度及偽影系數的測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994) |
| EN 61262-7-1995 |
醫療電氣設備光電X-射線影像增強器特性第7部分：調制傳遞函數的測定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function (IEC 61262-7:1995) |
| EN 61265-1995 |
電聲學航空噪聲測量儀器在運輸機噪聲鑒定中測量三分之一寬帶倍頻聲壓級裝置的性能要求 |
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995) |
| EN 61266-1995 |
超聲學手持探頭式多普勒胎兒心音探測儀性能要求、測量方法和報告 |
Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994) |
| EN 61267-1994 |
醫用診斷X射線設備測定特性用輻射條件 |
Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics (IEC 61267:1994) |
| EN 61269-1-1-1997 |
光纖端接裝置第1-1部分：空白詳細規范 |
Fibre optic terminus sets - Part 1-1: Blank detail specification (IEC 61269-1-1:1994) |
| EN 61269-1-1997 |
光纖端接裝置第1部分：通用規范 |
Fibre optic terminus sets - Part 1: Generic specification (IEC 61269-1:1994) |
| EN 61270-1-1996 |
微波爐用電容器第1部分：總則 |
Capacitors for microwave ovens - Part 1: General (IEC 61270-1:1996) |
| EN 61274-1-1-1997 |
光纖轉接器第1-1部分：空白詳細規范 |
Fibre optic adaptors - Part 1-1: Blank detail specification (IEC 61274-1-1:1994) |
| EN 61274-1-1997 |
光纖轉接器第1部分：通用規范 |
Fibre optic adaptors - Part 1: Generic specification (IEC 61274-1:1994) |
| EN 61277-1998 |
地面用光伏發電系統總則和指南 |
Terrestrial photovoltaic (PV) power generating systems - General and guide (IEC 61277:1995) |
| EN 61280-1-1-1998 |
光纖通信子系統基本試驗程序第1-1部分：一般通信子系統試驗程序單模光纜發射器光輸出功率的測量 |
Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:1998) |
| EN 61280-1-3-1999 |
光纖通信子系統基本試驗程序第1-3部分：一般通信子系統試驗程序中心波長和譜寬測量 |
Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement (IEC 61280-1-3:1998) |
| EN 61280-1-4-2003 |
光纖通信子系統試驗程序第1-4部分：一般通信子系統多模纖維激光發射機的雙維近場數據的收集和整理 |
Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003) / Note: Endorsement notice |
| EN 61280-2-1-1999 |
光纖通信子系統基本試驗程序第2-1部分：數字系統試驗程序接收器靈敏度和過載測量 |
Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement (IEC 61280-2-1:1998) |
| EN 61280-2-2-1999 |
光纖通信子系統基本試驗程序第2-2部分：數字系統試驗程序光眼圖、波形和消光比 |
Fibre optic communication subsystem basic test procedures - Part 2-2: Test procedures for digital systems - Optical eye pattern, waveform, and extinction ratio (IEC 61280-2-2:1998) |
| EN 61280-2-4-1998 |
光纖通信子系統基本試驗程序第2-4部分：數字系統試驗程序比特率容差測量 |
Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement (IEC 61280-2-4:1998) |
| EN 61280-2-5-1998 |
光纖通信子系統基本試驗程序第2-5部分：數字系統試驗程序抖動轉移功能測量 |
Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement (IEC 61280-2-5:1998) |
| EN 61280-2-8-2003 |
光纖通信子系統試驗程序數字系統第2-8部分：用Q系數測量法測定低BER |
Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003) / Note: Endorsement notice |
| EN 61280-2-9-2002 |
光纖通信子系統試驗程序第2-9部分：數字系統稠密波長分割度多路系統光學信號-噪聲系數測量 |
Fibre optic communication subsystem test procedures - Part 2-9: Digital systems; Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems (IEC 61280-2-9:2002) / Note: Endorsement notice |
| EN 61280-4-1-2004 |
光纖通信子系統試驗程序.第4部分:電纜設備和鏈接.多模光纖電纜設備衰減測量 |
|
| EN 61280-4-2-1999 |
光纖通信子系統基本試驗程序第4-2部分：光纜設施單模光纜設施衰減 |
Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation (IEC 61280-4-2:1999) |
| EN 61281-1-1999 |
光纖通信子系統通用規范 |
Fibre optic communication subsystems - Part 1: Generic specification (IEC 61281-1:1999) |
| EN 61284-1997 |
架空線路安裝要求和試驗 |
Overhead lines - Requirements and tests for fittings (IEC 61284:1997) |
| EN 61285-1994 |
工業過程控制分析器罩的安全 |
Industrial-process control - Safety of analyser houses (IEC 61285:1994 + Corrigendum 1994) |
| EN 61286-2002 |
信息技術起草用于電工及信息交換文件的編碼圖形文字集 |
Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange (IEC 61286:2001, modified) / Note: Endorsement notice |
| EN 61290-1-1-1998 |
光纖放大器基本規范第1-1部分：增益參數的試驗方法光譜分析儀 |
Optical fibre amplifiers - Basic specification - Part 1-1: Test methods for gain parameters - Optical spectrum analyzer (IEC 61290-1-1:1998) |
| EN 61290-1-2-1998 |
光纖放大器基本規范第1-2部分：增益參數的試驗方法電頻譜分析儀 |
Optical fibre amplifiers - Basic specification - Part 1-2: Test methods for gain parameters - Electrical spectrum analyzer (IEC 61290-1-2:1998) |
| EN 61290-1-3-1998 |
光纖放大器基本規范第1-3部分：增益參數的試驗方法光功率計 |
Optical fibre amplifiers - Basic specification - Part 1-3: Test methods for gain parameters - Optical power meter (IEC 61290-1-3:1998) |
| EN 61290-10-1-2003 |
光學放大器試驗方法第10-1部分：多路參數使用光學轉換開關和光譜分析儀的脈沖法 |
Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2003) / Note: Endorsement notice |
| EN 61290-10-2-2003 |
光學放大器試驗方法第10-2部分：多路參數使用選通光譜分析儀的脈沖法 |
Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2003) / Note: Endorsement notice |
| EN 61290-10-3-2003 |
光學放大器試驗方法第10-3部分：多路參數探針法 |
Optical amplifiers - Test methods - Part 10-3: Multichannel parameters; Probe methods (IEC 61290-10-3:2002) / Note: Endorsement notice |
| EN 61290-11-1-2003 |
光學放大器試驗方法第11-1部分：偏振模式傳播瓊斯矩陣特征分析方法 (JME) |
Optical amplifier test methods - Part 11-1: Polarization mode dispersion; Jones matrix eigenanalysis method (JME) (IEC 61290-11-1:2003) / Note: Endorsement notice |
| EN 61290-2-1-1998 |
光纖放大器基本規范第2-1部分：光功率參數的試驗方法光譜分析儀 |
Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer (IEC 61290-2-1:1998) |
| EN 61290-2-2-1998 |
光纖放大器基本規范第2-2部分：光功率參數的試驗方法電頻譜分析儀 |
Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters - Electrical spectrum analyzer (IEC 61290-2-2:1998) |
| EN 61290-2-3-1998 |
光纖放大器基本規范第2-3部分：光功率參數的試驗方法光功率計 |
Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter (IEC 61290-2-3:1998) |
| EN 61290-3-2-2003 |
光學放大器第3-2部分：噪聲數字參數的試驗方法電光譜分析儀法 |
Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method (IEC 61290-3-2:2003) / Note: Endorsement notice*Applies only in conjunction with EN 61290-3 and EN 61291-1 |
| EN 61290-3-2000 |
光纖放大器基本規范第3部分：噪音數字參數的試驗方法 |
Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters (IEC 61290-3:2000) |
| EN 61290-5-1-2000 |
光纖放大器基本規范第5-1部分：反射參數的試驗方法光譜分析儀 |
Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters; Optical spectrum analyser (IEC 61290-5-1:2000) |
| EN 61290-5-2-2004 |
光學放大器.試驗方法.第5-2部分:反射參數.電頻譜分析儀法 |
|
| EN 61290-5-3-2002 |
光纖放大器基礎規范第5-3部分：反射參數的試驗方法用電光譜分析儀測定反射偏差 |
Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance using an electrical spectrum analyzer (IEC 61290-5-3:2002) |
| EN 61290-6-1-1998 |
光纖放大器基本規范第6-1部分：泵浦泄漏參數的試驗方法光解復用器 |
Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer (IEC 61290-6-1:1998) |
| EN 61290-7-1-1998 |
光纖放大器基本規范第7-1部分：頻帶外插入損耗的試驗方法濾波光功率計 |
Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter (IEC 61290-7-1:1998) |
| EN 61291-1-1998 |
光纖放大器第1部分：通用規范 |
Optical fibre amplifiers - Part 1: Generic specification (IEC 61291-1:1998) |
| EN 61291-2-2000 |
光纖放大器第2部分：數字應用性能規范模板 |
Optical fibre amplifiers - Part 2: Digital applications; Performance specification template (IEC 61291-2:2000) |
| EN 61291-4-2003 |
光學放大器第4部分：多通道應用性能規范模板 |
Optical amplifiers - Part 4: Multichannel applications; Performance specification template (IEC 61291-4:2003) / Note: Endorsement notice |
| EN 61291-5-2-2002 |
光學放大器第5-2部分：鑒定規范光纖放大器可靠性鑒定 |
Optical amplifiers - Part 5-2: Qualification specifications; Reliability qualification for optical fibre amplifiers (IEC 61291-5-2:2002) / Note: Endorsement notice |
| EN 61293-1994 |
電氣設備電源額定值的標記安全要求 |
Marking of electrical equipment with ratings related to electrical supply - Safety requirements (IEC 61293:1994) |
| EN 61297-1995 |
工業過程控制系統評定用自適應控制器的分類 |
Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation (IEC 61297:1995) |
| EN 61298-1-1995 |
過程測量和控制裝置性能評定用一般方法和程序第1部分：一般考慮 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (IEC 61298-1:1995) |
| EN 61298-2-1995 |
過程測量和控制裝置性能評定用一般方法和程序第2部分：參考條件下的試驗 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions (IEC 61298-2:1995) |
| EN 61298-3-1998 |
過程測量和控制裝置性能評定用一般方法和程序第3部分：影響量作用的試驗 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities (IEC 61298-3:1998) |
| EN 61298-4-1995 |
過程測量和控制裝置性能評定用一般方法和程序第4部分：評定報告內容 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content (IEC 61298-4:1995) |
| EN 61300-1-1997 |
光纖互連器件和無源件基本試驗和測量程序第1部分：總則和指南 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:1995) |
| EN 61300-2-1-2003 |
光纖互連器件和無源件基本試驗和測量程序第2-1部分：試驗振動(正弦) |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003) / Note: Endorsement notice |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com