標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 3251-1995 |
色漆和清漆.色漆、清漆和色漆-清漆粘合劑中非揮發物質的測定 |
Paint and varnishes - Determination of the non-volatile matter of paints, varnishes and binders for paints and varnishes (ISO 3251:1993); German version EN ISO 3251:1995 |
| DIN EN ISO 3251-2003 |
色漆、清漆和塑料.非揮發物質含量的測定 |
(Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003); German version EN ISO 3251:2003) |
| DIN EN ISO 3252-2001 |
粉末冶金.詞匯 |
Powder metallurgy - Vocabulary (ISO 3252:1999); German version EN ISO 3252:2000 |
| DIN EN ISO 3262-1-1998 |
涂料用填充劑.要求和檢驗方法.第1部分:導言和一般檢驗方法 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997); German version EN ISO 3262-1:1998 |
| DIN EN ISO 3262-10-2001 |
涂料用填充劑.規范和試驗方法.第10部分:片狀天然滑石/亞氯酸鹽 |
Extenders for paints - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000); German version EN ISO 3262-10:2000 |
| DIN EN ISO 3262-11-2001 |
涂料用填充劑.規范和試驗方法.第11部分:含碳酸鹽的片狀天然滑石 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000); German version EN ISO 3262-11:2000 |
| DIN EN ISO 3262-12-2002 |
涂料用填充劑.規范和試驗方法.第12部分:白云母類云母 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001); German version EN ISO 3262-12:2001 |
| DIN EN ISO 3262-13-1998 |
涂料用填充料.要求和檢驗方法.第13部分:天然石英(已磨碎) |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997); German version EN ISO 3262-13:1998 |
| DIN EN ISO 3262-14-2000 |
涂料用填充劑.試驗規范和試驗方法.第14部分:白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); German version EN ISO 3262-14:2000 |
| DIN EN ISO 3262-15-2000 |
涂料用填充劑.試驗規范和試驗方法.第15部分:石英玻璃 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000); German version EN ISO 3262-15:2000 |
| DIN EN ISO 3262-16-2000 |
涂料用填充劑.規范和試驗方法.第16部分:氫氧化鋁 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000); German version EN ISO 3262-16:2000 |
| DIN EN ISO 3262-17-2000 |
涂料用填充劑.規范和試驗方法.第17部分:沉淀硅酸鈣 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000); German version EN ISO 3262-17:2000 |
| DIN EN ISO 3262-18-2000 |
涂料用填充劑.規范和試驗方法.第18部分:沉淀硅鋁酸鈉 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000); German version EN ISO 3262-18:2000 |
| DIN EN ISO 3262-19-2000 |
涂料用填充劑.規范和試驗方法.第19部分:沉淀石英 |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000 |
| DIN EN ISO 3262-2-1998 |
涂料用填料.要求和檢驗方法.第2部分:重晶石(天然硫酸鋇) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
| DIN EN ISO 3262-2-1998 |
涂料用填料.要求和檢驗方法.第2部分:重晶石(天然硫酸鋇) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
| DIN EN ISO 3262-20-2000 |
涂料用填充劑.規范和試驗方法.第20部分:煙化石英 |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000 |
| DIN EN ISO 3262-21-2000 |
涂料用填充劑.規范和試驗方法.第21部分:石英砂(地下天然石英) |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000 |
| DIN EN ISO 3262-22-2002 |
涂料用填充劑.規范和試驗方法.第22部分:熱堿處理的硅藻土 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined Kieselguhr (ISO 3262:2001); German version EN ISO 3262-22:2001 |
| DIN EN ISO 3262-4-1998 |
涂料用填料.要求和檢驗方法.第4部分:粉化 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998); German version EN ISO 3262-4:1998 |
| DIN EN ISO 3262-5-1998 |
涂料用填料.要求和檢驗方法.第5部分:天然結晶碳酸鈣 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998); German version EN ISO 3262-5:1998 |
| DIN EN ISO 3262-6-1998 |
涂料用填料.要求和檢驗方法.第6部分:沉淀的碳酸鈣 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998); German version EN ISO 3262-6:1998 |
| DIN EN ISO 3262-7-1998 |
涂料用填料.要求和檢驗方法.第7部分:白云石 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998); German version EN ISO 3262-7:1998 |
| DIN EN ISO 3262-8-1999 |
涂料用填充劑.試驗方法規范.第8部分:天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999); German version EN ISO 3262-8:1999 |
| DIN EN ISO 3262-9-1998 |
涂料用填充料.要求和檢驗方法.第9部分:煅燒的高嶺土 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997); German version EN ISO 3262-9:1998 |
| DIN EN ISO 3269-2000 |
緊固件.驗收檢查 |
Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000 |
| DIN EN ISO 3274-1998 |
幾何產品規范(GPS).織物表面:輪廓法.接觸尖筆式記錄儀的一般特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997 |
| DIN EN ISO 3325-2002 |
包括硬性金屬的燒結金屬材料.測定橫向斷裂強度 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002 |
| DIN EN ISO 3336-1996 |
牙科學.合成聚合物牙齒 |
Dentistry - Synthetic polymer teeth (ISO 3336:1993); German version EN ISO 3336:1996 |
| DIN EN ISO 3344-1997 |
增強制品.水份含量的測定 |
Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997 |
| DIN EN ISO 3381-2005 |
鐵路設施.聲學.有軌車輛內的噪聲測量 |
|
| DIN EN ISO 3382-2000 |
聲學.參考其它聲學參數的房間混響時間的測量 |
Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997); German version EN ISO 3382:2000 |
| DIN EN ISO 3385-1995 |
軟質泡沫聚合材料.用定載沖擊法測定疲勞 |
Flexible cellular polymeric materials - Determination of fatigue by constant load pounding (ISO 3385:1989); German version EN ISO 3385:1995 |
| DIN EN ISO 3386-1-1998 |
泡沫柔性聚合材料.壓縮應力應變特性的測定.第1部分:低密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986); German version EN ISO 3386-1:1997 |
| DIN EN ISO 3386-2-1998 |
泡沫柔性聚合材料.壓縮應力應變特性的測定.第2部分:高密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997); German version EN ISO 3386-2:1997 |
| DIN EN ISO 3405-2001 |
石油產品.在大氣壓下測定蒸餾特性 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000); German version EN ISO 3405:2000 |
| DIN EN ISO 3411-1999 |
土方機械.操作者的人體尺寸和操作者最小座艙空間 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995); German version EN ISO 3411:1999 |
| DIN EN ISO 3450-1996 |
土方機械.裝橡膠輪胎機械的制動裝置.系統,要求和檢驗 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996); German version EN ISO 3450:1996 |
| DIN EN ISO 3451-1-1997 |
塑料.灰份的測定.第1部分:一般方法 |
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:1997); German version EN ISO 3451-1:1997 |
| DIN EN ISO 3451-4-2001 |
塑料.灰分的測定.第4部分:聚酰胺 |
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998); German version EN ISO 3451-4:2000 |
| DIN EN ISO 3451-5-2002 |
塑料.灰分的測定.第5部分:聚氯乙烯 |
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002); German version EN ISO 3451-5:2002 |
| DIN EN ISO 3452-2-2000 |
無損試驗.滲透試驗.第2部分:滲透材料試驗 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000); German version EN ISO 3452-2:2000 |
| DIN EN ISO 3452-3-1999 |
無損檢驗.滲透檢驗.第3部分:標準試樣 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998); German version EN ISO 3452-3:1998 |
| DIN EN ISO 3452-4-1999 |
無損檢驗.滲透檢驗.第4部分:設備 |
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998); German version EN ISO 3452-4:1998 |
| DIN EN ISO 3457-1995 |
土方機械.擋板和護罩.定義和規范 |
Earth moving machinery - Guards and shields - Definitions and specifications (ISO 3457:1986); German version EN ISO 3457:1995 |
| DIN EN ISO 3497-2001 |
金屬鍍層.鍍層厚度的測量.X射線光譜測定法 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000 |
| DIN EN ISO 3506-1-1998 |
不銹鋼制連接件的機械性能.第1部分:螺絲 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 |
| DIN EN ISO 3506-2-1998 |
耐腐蝕不銹鋼緊固件的機械特性.第2部分:螺母 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997 |
| DIN EN ISO 3506-3-1998 |
耐腐蝕不銹鋼緊固件的機械特性.第3部分:螺銷和類似的無拉應力的螺絲 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997 |
| DIN EN ISO 3521-1999 |
塑料.不飽和聚酯和環氧樹脂.體積的總收縮量的測定 |
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999 |
| DIN EN ISO 3543-2001 |
金屬和非金屬涂層.厚度測量.β射線反向散射法 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000 |
| DIN EN ISO 3549-2002 |
色漆用鋅粉顏料.規范和試驗方法 |
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995); German version EN ISO 3549:2002 |
| DIN EN ISO 3582-2001 |
柔性多孔聚合材料.在小火焰條件下小試樣水平方向燃燒特性的實驗室評定 |
Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000); German version EN ISO 3582:2000 |
| DIN EN ISO 3593-1994 |
淀粉.灰分的測定 |
Starch - Determination of ash (ISO 3593:1981); German version EN ISO 3593:1994 |
| DIN EN ISO 3596-2002 |
動植物脂肪和油.不可皂化物的測定.二已醚萃取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000); German version EN ISO 3596:2001 |
| DIN EN ISO 3613-2002 |
鋅、鎘、鋁鋅合金和鋅鋁合金的鉻酸鹽轉化鍍層.試驗方法 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000); German version EN ISO 3613:2001 |
| DIN EN ISO 3630-1-1994 |
牙根管器械.第1部分:銼刀、擴孔器、毛刺鉆孔器、粗銼、軟膏、探測器和棉條鉆孔器 |
Dental root-canal instruments - Part 1: Files, reamers, barbed broaches, rasps, paste carries, explorers and cotton broaches (ISO 3630-1:1992); German version EN ISO 3630-1:1994 |
| DIN EN ISO 3630-2-2001 |
牙根管器械.第2部分:擴管器 |
Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000); German version EN ISO 3630-2:2000 |
| DIN EN ISO 3630-3-1996 |
牙根管器械.第3部分:充盈冷凝器,充盈充填器和充盈分配器 |
Dental root-canal instruments - Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994); German version EN ISO 3630-3:1996 |
| DIN EN ISO 3650-1999 |
幾何產品規范(GPS).長度標準.塊規 |
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 |
| DIN EN ISO 3651-1-1998 |
不銹鋼抗晶間腐蝕性能的測定.第1部分:奧氏體和鐵氧奧氏體(雙重的)不銹鋼.用測量質量損失的辦法進行硝酸中的腐蝕試驗(晶間腐蝕試驗) |
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German v |
| DIN EN ISO 3651-2-1998 |
不銹鋼抗晶間腐蝕性能的測定.第1部分:奧氏體和鐵氧奧氏體(雙重的)不銹鋼.在含硫酸介質中進行腐蝕試驗 |
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2: |
| DIN EN ISO 3656-2002 |
動植物脂肪和油.以特定的紫外線消光系數表示的紫外線吸收率的測定 |
Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2002); German version EN ISO 3656:2002 |
| DIN EN ISO 3668-2001 |
涂料和清漆.涂料顏色的外觀比較 |
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998); German version EN ISO 3668:2001 |
| DIN EN ISO 3671-1998 |
塑料.氨基塑料模塑材料.揮發性物質的測定 |
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 |
| DIN EN ISO 3672-1-2002 |
塑料.未飽和的聚酯樹脂.第1部分:命名體系 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001 |
| DIN EN ISO 3672-2-2002 |
塑料.未飽和的聚酯樹脂.第2部分:試樣制備和特性測定 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001 |
| DIN EN ISO 3673-1-1999 |
塑料.環氧樹脂.第1部分:名稱與符號 |
Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999 |
| DIN EN ISO 3673-2-2000 |
塑料.環氧樹脂.第2部分:試驗樣品制備和特性測定 |
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999 |
| DIN EN ISO 3675-1999 |
原油和液體石油產品.密度或相對密度的實驗室測定.石油密度計法 |
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998 |
| DIN EN ISO 3677-1995 |
軟釬焊,銅焊和硬釬焊接用填充金屬.命名 |
Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992); German version EN ISO 3677:1995 |
| DIN EN ISO 3678-1995 |
色漆和清漆.無印痕試驗 |
Paints and varnishes - Print-free test (ISO 3678:1976); German version EN ISO 3678:1995 |
| DIN EN ISO 3679-2004 |
閃點的測定.快速平衡閉杯法 |
|
| DIN EN ISO 3680-2004 |
閃和非閃測定.快速平衡閉杯法 |
|
| DIN EN ISO 3681-1998 |
色漆和清漆用粘合劑.皂化值的測定.滴定法 |
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:1996); German version EN ISO 3681:1998 |
| DIN EN ISO 3690-2001 |
焊接及相關工藝.電弧焊接含鐵金屬中氫含量的測定 |
Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO/DIS 3690:2000); German version EN ISO 3690:2000 |
| DIN EN ISO 3715-1-2004 |
船舶和海上技術.船舶用推進裝置.推進器的幾何學詞匯 |
|
| DIN EN ISO 3715-2-2003 |
船舶和海上技術.船舶用推進器設備.第2部分:可變距推進器設備用詞匯 |
Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001); German version EN ISO 3715-2:2002 |
| DIN EN ISO 3727-1-2002 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第1部分:含水量的測定(基準方法) |
Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001); German version EN ISO 3727-1:2001 |
| DIN EN ISO 3727-2-2002 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第2部分:非脂肪固體含量的測定(基準方法) |
Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001 |
| DIN EN ISO 3727-3-2003 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.第3部分:脂肪含量的計算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003); German version EN ISO 3727-3:2003) |
| DIN EN ISO 3735-1999 |
原油和燃料油.沉積物的測定.萃取法 |
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735-1999); German version EN ISO 3735:1999 |
| DIN EN ISO 3740-2001 |
聲學.噪聲源音響功率級的測定.基礎標準使用指南 |
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); German version EN ISO 3740:2000 |
| DIN EN ISO 3741 Berichtigung 1-2002 |
對DIN EN ISO 3741:2001-01的勘誤 |
Corrigenda to DIN EN ISO 3741:2001-01 (EN ISO 3741:1999/AC:2002) |
| DIN EN ISO 3741-2001 |
聲學.用聲壓法測定噪聲源聲級.混響室用精確方法(ISO 3741:1999) |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999); German version EN ISO 3741:1999 |
| DIN EN ISO 3743-1-1995 |
聲學.噪聲源聲功率級的測定.在混響聲場中小聲源和移動聲源的工程測量方法.第1部分:硬墻試驗室的比較分析法 |
Acoustics - Determination of sound power levels of noise sources; engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994); German version EN ISO 3743-1:1995 |
| DIN EN ISO 3743-2-1996 |
聲學.利用聲壓對噪聲源混響場噪聲源聲功率級的測定.在混響場中對小聲源,可移動聲源的工程測量方法.第2部分:用專用混響試驗室的測量方法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); German version EN ISO 37 |
| DIN EN ISO 3744-1995 |
聲學.噪聲源音響功率級的測定.反射平面上基本自由聲場用2級精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essential free field over a reflecting plane (ISO 3744:1994); German version EN ISO 3744:1995 |
| DIN EN ISO 3745-2004 |
聲學.利用聲壓測定噪聲源的聲功率級.消聲室和半消聲室的精確方法 |
|
| DIN EN ISO 3746-1995 |
聲學.聲壓測量產生的噪音源的聲功率級測定.反射平面上3級精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995); German version EN ISO 3746:1995 |
| DIN EN ISO 3747-2001 |
聲學.用聲壓測定噪聲源的聲級 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000); German version EN ISO 3747:2000 |
| DIN EN ISO 3759-1995 |
紡織品.測定尺寸變化試驗用織物樣品和服裝的制備、標記和測量 |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:1994); German version EN ISO 3759:1995 |
| DIN EN ISO 376-2003 |
金屬材料.單軸向試驗機驗證用作用力檢驗儀的校準 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:1999); German version EN ISO 376:2002 |
| DIN EN ISO 376-2005 |
金屬材料.單軸向試驗機驗證用作用力檢驗儀的校準 |
|
| DIN EN ISO 3766 Berichtigung 1-2005 |
對DIN EN ISO 3766-2004的勘誤 |
|
| DIN EN ISO 3766-2004 |
建筑工程制圖.鋼筋混凝土的簡化畫法 |
|
| DIN EN ISO 377-1997 |
鋼和鋼產品.機械試驗用試樣和試件的定位與制備 |
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997); German version EN ISO 377:1997 |
| DIN EN ISO 3785-1995 |
鋼.試件軸線的規定 |
Steel - Designation of test piece axes (ISO 3785:1976); German version EN ISO 3785:1995 |
| DIN EN ISO 3796-2002 |
船舶和航海技術.外開單扇門的凈寬 |
Ships and marine technology - Clear openings for external single-leaf doors (ISO 3796:1999); German version EN ISO 3796:2001 |
| DIN EN ISO 3815-2-2005 |
鋅和鋅合金.第2部分:用感應耦合等離子體光輻射光譜測定法分析 |
|
| DIN EN ISO 3822-1-1999 |
聲學.試驗室中檢驗供水設備上管件和裝置中發出的噪聲的性質.第1部分:測量方法 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999 |
| DIN EN ISO 3822-2-1995 |
聲學.由供水設施和設備發出噪音的實驗室試驗.第2部分:放水龍頭和混合電池的安裝和工作條件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995); German version EN ISO 3822-2:1995 |
| DIN EN ISO 3822-3-1997 |
聲學.在實驗室里檢測供水站使用的裝置和設備發出的燥音的特性.第3部分:管線上用的管件的連接和操作條件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997 |
| DIN EN ISO 3822-4-1997 |
聲學.在實驗室里檢測供水站使用的裝置和設備發出的燥音的特性.第4部分:特殊管件用連接和操作條件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997 |
| DIN EN ISO 3823-1-1999 |
牙科用旋轉器械.牙鉆.第1部分:鋼制牙鉆和硬質合金牙鉆 |
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997); German version EN ISO 3823-1:1998 |
| DIN EN ISO 3826-1-2004 |
人體血液和血液成分用折式塑料容器.第1部分:常規容器 |
|
| DIN EN ISO 3830-1995 |
石油產品.汽油中鉛含量的測定.一氯化碘法 |
Petroleum products - Determination of lead content of gasoline - Iodine monochlorid method (ISO 3830:1993); German version EN ISO 3830:1995 |
| DIN EN ISO 3838-1995 |
原油和液體或固體石油產品.密度或相對密度的測定.毛細管塞阻比重瓶法和帶刻度雙毛細菅比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:1983); German version EN ISO 3838:1995 |
| DIN EN ISO 3838-2004 |
原油和液體或固體石油產品.密度或相對密度的測定.毛細管塞比重瓶和帶刻度雙毛細管比重瓶法 |
|
| DIN EN ISO 3861-1997 |
噴砂用橡膠軟管.要求 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 3868-1995 |
金屬和其他無機物涂層.涂層厚度的測量.菲索(Fizeau)多光束干涉儀法 |
Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994 |
| DIN EN ISO 3882-1995 |
金屬和其他無機物涂層.厚度測量方法述評 |
Metallic and other non-organic coatings - Review of methods of measurement of thickness (ISO 3882:1986); German version EN ISO 3882:1994 |
| DIN EN ISO 389-1-2000 |
聲學.音響設備校正用參考零點.第1部分:純音和耳掛式耳機用參考等效閾聲壓級 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent treshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998); German version EN ISO 389-1:2000 |
| DIN EN ISO 389-2-1996 |
聲學.音響設備校正標準參考零點.第2部分:純音和插入式耳機用參考等效最低限度聲級 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994); German version EN ISO 389-2:1996 |
| DIN EN ISO 389-3-1999 |
聲學.音響設備校正標準參考零點.第3部分:純音和骨傳導耳機用參考等效極限聲級 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 389-3:1998 |
| DIN EN ISO 389-4-1999 |
聲學.音響設備校正標準參考零點.第4部分:窄帶遮敝噪聲用參考聲級 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994); German version EN ISO 389-4:1998 |
| DIN EN ISO 389-5-2000 |
聲學.聽力測定設備校正參考零點.頻率范圍8kHz-16kHz的純音參考相等的閾值聲音壓力水平 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequence range 8 kHz to 16 kHz (ISO/TR 389-5:1998); German version EN ISO 389-5:1999 |
| DIN EN ISO 389-7-1998 |
聲學.音響設備的校正標準基準水平.第7部分:自由聲波場和擴散聲場條件下的基準聽覺閾 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996); German version EN ISO 389-7:1998 |
| DIN EN ISO 389-8-2004 |
聲學.校準聽力設備的基準零級.第8部分:純音和環繞式耳機的基準等效閾聲壓級 |
|
| DIN EN ISO 3892-2001 |
金屬材料的轉化涂層.單位面積涂層質量的測定.重量分析法 |
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com