標準號 |
中文名稱 |
英文名稱 |
| DIN EN 28662-1-1993 |
便攜式手提動力工具.手柄振動測量.通則 |
(Hand-held portable power tools; measurement of vibrations at the handle; part 1: general (ISO 8662-1:1988); german version EN 28662-1:1992) |
| DIN EN 28662-100-2002 |
便攜式手提動力工具.手柄振動測量.第100部分:第2部分、第3部分和第5部分的修改件 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Part 100: Amendments to Part 2, Part 3 and Part 5 (EN 28662-2/A2:2001, EN 28662-3/A2:2001 und EN 28662-5/A2:2001)) |
| DIN EN 28662-5-1995 |
便攜式手提動力工具.手工振動測量.第5部分:建筑工程用鋪設斷路器和錘子. |
(Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work pick hammers (ISO 8662-5:1992); German version EN 28662-5:1994 + A1:1995) |
| DIN EN 28692-1993 |
水質.用綠藻類柵薄屬的subspicatus和月牙藻屬的capricornutum做淡水藻生長抑制試驗 |
(Water quality; fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8692:1989); German version EN 28692:1993) |
| DIN EN 287-1-1997 |
焊接試驗.熔焊.第1部分:鋼(含更改A1:1997) |
(Approval testing of welders - Fusion welding - Part 1: Steels (includes Amendment A1:1997); German version EN 287-1:1992 + A1:1997) |
| DIN EN 287-1-2004 |
焊工的資格鑒定試驗.熔焊.第1部分:鋼 |
|
| DIN EN 287-2-1997 |
焊接試驗.熔焊.第2部分:鋁和鋁合金 |
(Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (includes Amendment A1:1997); German version EN 287-2:1992 + A1:1997) |
| DIN EN 2870-1996 |
航空和航天.鈦合金制陽極化MoS2潤滑十二角緊配合螺絲.等級1100MPa(室溫下)/315℃ |
(Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 2870:1996) |
| DIN EN 28736-1992 |
未淬火的帶內螺紋的錐銷 |
(Taper pins with internal thread, unhardened (ISO 8736:1986); german version EN 28736:1992) |
| DIN EN 28737-1992 |
未淬火的帶外螺紋的錐銷 |
(Taper pins with external thread, unhardened (ISO 8737:1986); german version EN 28737:1992) |
| DIN EN 28738-1992 |
螺栓用墊圈.產品等級A |
(Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992) |
| DIN EN 2874-1996 |
航空和航天.鈍化耐高溫鎳基合金中長螺紋十二角緊配合螺絲.等級1550MPa(室溫下)/315℃ |
(Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 C; German version EN 2874:1996) |
| DIN EN 28749-1992 |
銷子和帶槽銷,剪切試驗 |
(Pins and grooved pins; shear test (ISO 8749:1986); german version EN 28749:1992) |
| DIN EN 28768-1993 |
包裝.滿裝的運輸包裝.倒塌試驗 |
(Packaging; complete, filled transport packages; toppling test (ISO 8768:1986); german version EN 28768:1992) |
| DIN EN 288-1-1997 |
金屬材料焊接方法的要求和鑒定.第1部分:熔焊的一般規則 |
(Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding (including Amendment A1:1997); German version EN 288-1:1992 + A1:1997) |
| DIN EN 288-2-1997 |
金屬材料焊接方法的要求和鑒定.第2部分:電弧焊的焊接規程 |
(Specification and approval of welding procedures for metallic materials - Part 2: Welding procedure specification for arc welding (includes Amendment A1:1997); German version EN 288-2:1992 + A1:1997) |
| DIN EN 288-3-1997 |
金屬材料焊接方法的要求和鑒定.第3部分:鋼材電弧焊的焊接方法檢驗 |
(Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steel (includes Amendment A1:1997); German version EN 288-3:1992 + A1:1997) |
| DIN EN 288-4-1997 |
金屬材料焊接方法的要求鑒定.第4部分:鋁和鋁合金電弧焊接方法檢驗 |
(Specification and approval of welding procedures for metallic materials - Part 4: Welding procedure tests for the arc welding of aluminium and its alloys (includes Amendment A1:1997); German version EN 288-4:1992 + A1:1997) |
| DIN EN 288-5-1994 |
金屬材料焊接方法的要求鑒定.第5部分:通過使用經認可的電弧焊焊接填料作鑒定 |
(Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding; German version EN 288-5:1994) |
| DIN EN 288-6-1994 |
金屬材料焊接方法的要求鑒定.第6部分:根據現有的經驗作鑒定 |
(Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience; German version EN 288-6:1994) |
| DIN EN 288-7-1995 |
金屬材料焊接方法的要求鑒定.第7部分:電弧焊一般焊接方法認定 |
(Specification and approval of welding procedures for metallic materials - Part 7: Approval by a standard welding procedure for arc welding; German version EN 288-7:1995) |
| DIN EN 288-8-1995 |
金屬材料焊接方法的要求鑒定.第8部分:通過生產前焊接檢驗作鑒定 |
(Specification and approval of welding procedures for metallic materials - Part 8: Approval by a pre-production welding test; German version EN 288-8:1995) |
| DIN EN 288-9-1999 |
金屬材料焊接方法的要求和鑒定.第9部分:陸地和近海供料管道的現場焊接對接接縫的焊接方法檢驗 |
(Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines; German version EN 288-9:1999) |
| DIN EN 28806-4-1994 |
信息技術.圖解數據加工.三維空間圖的圖解核心系統的語言連接.第4部分:C語言 |
(Information technology - Computer graphics - Graphical kernel system for three dimensions (GKS-3D) language bindings - Part 4: C (ISO/IEC 8806-4:1991); German version EN 28806-4:1993) |
| DIN EN 28839-1991 |
緊固件的機械性能.有色金屬螺釘和螺母(ISO8839-86) |
(Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991) |
| DIN EN 2884-1996 |
航空和航天.用MoS2潤滑,陽極化,鈦合金制,短螺紋,帶翼型十字槽的平頭螺釘.等級:1100MPa(室溫下)/315℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated, classification: 1100 MPa (at ambient temperature)/315 C; German version EN 2884:1996) |
| DIN EN 28846 Berichtigung 1-2001 |
DINEN28846-1993的勘誤 |
(Corrigendum to DIN EN 28846:1993 (German version EN 28846:1993/A1:2000)) |
| DIN EN 28846-1993 |
游艇.電氣裝置.對周圍可燃?xì)怏w的引燃防護 |
(Small craft; electrical devices; protection against ignition of surrounding flammable gases (ISO 8846:1990); German version EN 28846:1993) |
| DIN EN 28848 Berichtigung 1-2001 |
DINEN28848:1993的勘誤 |
(Corrigendum to DIN EN 28848:1993 (German version EN 28848:1993/A1:2000)) |
| DIN EN 28848-1993 |
游艇.控制設備 |
(Small craft; remote steering systems (ISO 8848:1990); German version EN 28848:1993) |
| DIN EN 28849 Berichtigung 1-2001 |
DINEN28849-1993的技術勘誤 |
(Corrigendum to DIN EN 28849:1993; German version EN 28849:1993/A1:2000) |
| DIN EN 28849-1993 |
游艇.電動艙底泵 |
(Small craft; electrically operated bilge-pumps (ISO 8849:1990); German version EN 28849:1993) |
| DIN EN 2885-1996 |
航空和航天.鍍鎘,合金鋼制,短螺紋,帶翼型十字槽的平頭螺釘.等級:900MPa(室溫下)/235℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 C; German version EN 2885:1996) |
| DIN EN 2886-1996 |
航空和航天.鍍鉻合金鋼制短螺紋帶翼形十字槽的平頭緊配合螺絲.等級:900MPa/235℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 C; German version EN 2886:1996) |
| DIN EN 28860-1-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.每面80磁道的記錄方式.在90mm(3.5in)的軟磁盤存儲器上進行數據 |
(Information processing; data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, on 80 tracks on each side; part 1: dimensional, physical and magnetic characteristics (ISO 8860-1:1987); ger |
| DIN EN 28860-2-1991 |
數據處理.用改進的調頻制.以雙面7958ftpred.每面80磁道的記錄方式.在90mm(3.5in)的軟磁盤存儲器上進行數據 |
(Information processing; data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, on 80 tracks on each side; part 2: track format (ISO 8860-2:1987); german version EN 28860-2:1989) |
| DIN EN 2887-1995 |
航空和航天.鈍化耐蝕鋼制螺紋接近頂部的六角螺釘.等級:600MPa(室溫下)/425℃ |
(Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 C; German version EN 2887:1995) |
| DIN EN 28877-1993 |
信息技術.系統間電子通信和信息交換基準點S和T的ISDN基本存取接口用插接器和接點分配 |
(Information technology; telecommunications and information exchange between systems; interface connector and contact assignment for ISDN basic access interface located at reference points S and T (ISO/IEC 8877:1992); English version EN 28877:1993) |
| DIN EN 28879-1991 |
信息處理.文本處理和文本通信.通用標準識別語言(SGML)(ISO8879:1986+A1:1988) |
(Information processing; text and office systems; standard generalized markup language (SGML) (ISO 8879:1986 + A1:1988) EN 28879:1990) |
| DIN EN 2888-1995 |
航空和航天.鈍化耐蝕鋼制短螺紋六角螺釘.等級:600MPa(室溫下)/425℃ |
(Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 C; German version EN 2888:1995) |
| DIN EN 2889-1995 |
航空和航天.鍍鎘合金鋼制短螺紋六角螺釘.等級:900MPa(室溫下)/235℃ |
(Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2889:1995) |
| DIN EN 289-1994 |
橡膠和塑料加工機械.模壓機和噴壓機.設計的安全技術要求 |
(Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design; German version EN 289:1993) |
| DIN EN 289-2004 |
橡膠和塑料加工機械.壓力機.安全要求 |
|
| DIN EN 28960-1993 |
家用和類似用途冰箱.冷藏柜和冷凍柜.空氣噪聲輻射檢驗 |
(Refrigerators, frozen food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991); German version EN 28960:1993) |
| DIN EN 2897-1996 |
航空和航空.鍍鉻合金鋼制短螺紋帶翼形十字槽的平頭緊配合螺絲.等級:1100MPa/235℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 C; German version EN 2897:1996) |
| DIN EN 28970-1991 |
木結構建筑.用機械緊固件連接的檢驗.對木材粗密度的要求(ISO8970-88) |
(Timber structures; testing of joints made with mechanical fasteners; requirements for wood density (ISO 8970:1989); german version EN 28970:1991) |
| DIN EN 28996-1993 |
人機工效學.代謝熱量的測定 |
(Ergonomics; determination of metabolic heat production (ISO 8996:1990); German version EN 28996:1993) |
| DIN EN 29008-1994 |
玻璃瓶.垂直度.試驗方法 |
(Glass bottles; verticality; test method (ISO 9008:1991); German version EN 29008:1994) |
| DIN EN 29009-1994 |
玻璃容器.以容器底作基準的瓶口高度和不平行性.試驗方法 |
(Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991); German version EN 29009:1994) |
| DIN EN 29046-1991 |
高層建筑.接縫密封材料.常溫下粘附性能和拉伸性能的測定(ISO9046:1987) |
(Building construction; jointing products; determination of adhesion/cohesion properties at constant temperature (ISO 9046:1987); german version EN 29046:1990) |
| DIN EN 29048-1991 |
高層建筑.接縫密封材料.用符合標準的儀器測定密封材料的可加工性(ISO9048:1987) |
(Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987); german version EN 29048:1990) |
| DIN EN 29052-1-1992 |
聲學.動態勁度的測定.第1部分:住宅中浮式地板下面用的材料 |
(Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings; german version EN 29052-1:1991) |
| DIN EN 29053-1993 |
聲學.聲學應用材料.空氣流動阻力的測定 |
(Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991); German version EN 29053:1993) |
| DIN EN 2906-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制自鎖十二角螺母.等級:1100MPa(室溫)650攝氏度 |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2906:1994) |
| DIN EN 2907-1995 |
航空和航天.鍍銀FE-PA92HT(A286)耐高熱鋼自鎖十二角螺母.等級:1100MPa(室溫下)/650℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2907:1995) |
| DIN EN 29070-1993 |
信息技術.SGML.支持設備.公共電文主標識符定位過程 |
(Information processing; SGML support facilities; registration procedures for public text owner identifiers (ISO/IEC 9070:1991); english version EN 29070:1992) |
| DIN EN 29073-1-1992 |
紡織品.非織物的檢驗方法.第1部分:單位面積的質量測定 |
(Textiles; test method for nonwovens; part 1: determination of mass per unit area (ISO 9073-1:1989); german version EN 29073-1:1992) |
| DIN EN 29073-3-1992 |
紡織品.非織物的檢驗方法.第3部分:最大拉強度和最大拉伸力延伸度的測定 |
(Textiles; test method for nonwovens; part 3: determination of tensile strength and elongation (ISO 9073-3:1989); german version EN 29073-3:1992) |
| DIN EN 2908-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制圓柱形劃孔自鎖十二角螺母.等級:1100MPa(室溫)650攝氏度 |
(Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2908:1994) |
| DIN EN 2909-1995 |
航空和航天.自鎖帶圓柱劃孔FE-PA92HT(A286)高溫鋼制鍍銀十二角螺母.等級:1100MPa/650℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2909:1995) |
| DIN EN 29092-1992 |
紡織品.非織造物.概念 |
(Textiles; nonwowens; definition (ISO 9092:1988); german version EN 29092:1992) |
| DIN EN 2910-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制自鎖鉚接螺母.等級:1100MPa(室溫)650攝氏度 |
(Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2910:1994) |
| DIN EN 29104-1993 |
封閉管道內液體流量測量.液體電磁流量計特性評定法 |
(Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993) |
| DIN EN 2911-1995 |
航空和航天.自鎖FE-PA92HT(A286)型鍍銀的鉚接螺母.等級:1100MPa/650℃ |
(Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2911:1995) |
| DIN EN 29117-1992 |
清漆和涂料.干透狀態和干透時間的測定.檢驗方法 |
(Paints and varnishes; determination of through-dry state and through-dry time (ISO 9117:1990); german version EN 29117:1992) |
| DIN EN 2912-1996 |
航空和航天.鋁合金制陽極化或鉻酸鈍化的大外徑平墊圈 |
(Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated; German version EN 2912:1996) |
| DIN EN 2913-2000 |
航空和航天系列.扁形大外徑鍍鎘鋼墊圈 |
(Aerospace series - Washers, flat, large diameter, in steel, cadmium plated; German version EN 2913:1999) |
| DIN EN 2914-1996 |
航空和航天.耐高溫鋼制鈍化的大外徑平墊圈 |
(Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated; German version EN 2914:1996) |
| DIN EN 29142-1993 |
膠粘劑.膠粘連接試驗用標準實驗室老化條件的選擇導則 |
(Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990); German version EN 29142:1993) |
| DIN EN 29168-1994 |
手持式牙科器件.軟管連接件 |
(Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994) |
| DIN EN 29171-1-1993 |
信息技術.信息交換用130mm只寫一次光盤存儲器.第1部分:空白光盤 |
(Information technology; 130 mm optical disk cartridge, write once, for information interchange; part 1: unrecorded optical disk cartridge (ISO/IEC 9171-1:1990); English version EN 29171-1:1993) |
| DIN EN 29171-2-1993 |
信息技術.信息交換用130mm只寫一次光盤存儲器.第2部分:記錄格式 |
(Information technology; 130 mm optical disk cartridge, write once, for information interchange; part 2: recording format (ISO/IEC 9171-2:1990); English version EN 29171-2:1993) |
| DIN EN 292-1-1991 |
機器的安全性.基本概念.一般設計原則.第1部分:基本術語.方法 |
(Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology) |
| DIN EN 292-2-1995 |
機器的安全性.基本概念.一般設計原則.第2部分:技術原則和規范 |
(Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specifications; German version EN 292-2:1991 + A1:1995) |
| DIN EN 29202-1993 |
珠寶.貴金屬合金的鈍度 |
(Jewellery; fineness of precious metal alloys (ISO 9202:1991); german version EN 29202:1992) |
| DIN EN 29241-2-1993 |
具有可視顯示終端的辦公室工作的人類工效學要求.第2部分;任務要求指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs); part 2: guidance on task requirements (ISO 9241-2:1992); German version EN 29241-2:1993) |
| DIN EN 29241-3-1993 |
具有屏幕顯示終端的辦公用人機工程學要求.第3部分:顯示要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs); part 3: visual display requirements (ISO 9241-3:1992); German version EN 29241-3:1993) |
| DIN EN 29241-3/A1-2002 |
具有可視顯示終端的辦公室工作的人類工效學要求.第3部分:可視顯示要求.修改件A1 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Part 3: Visual display requirements; Amendment A1 (ISO 9241-3:1992/AMD 1:2000); German version EN 29241-3:1993/A1:2000) |
| DIN EN 2925-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制長螺紋扁柄十二角螺絲.等級:900MPa(室溫)650度 |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2925:1994) |
| DIN EN 2926-1996 |
航空和航天.耐高溫鋼FE-FA92HT(A286)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:900Mpa(室溫外)/650℃ |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2926:1996) |
| DIN EN 2927-1996 |
航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳718)制長螺紋細螺桿十二角螺絲釘.等級:1275Mpa(室溫外)/650℃ |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2927:1996) |
| DIN EN 2928-1996 |
航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳718)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:1275Mpa(環境溫度)/6 |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2928:1996) |
| DIN EN 2929-1996 |
航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳718)制長螺紋細螺桿十二角螺絲釘.等級:1210Mpa(室溫外)/730℃ |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 2929:1996) |
| DIN EN 29293-1991 |
數據處理.軟磁盤上用于信息交換的標記和文件格式(ISO9293-87) |
(Information processing; volume and file structure of flexible disk cartridges for information interchange (ISO 9293:1987); german version EN 29293:1989) |
| DIN EN 29295-1991 |
聲學.辦公機械及信息技術設備高頻率噪聲的測量(ISO9295-89) |
(Acoustics; measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1989); german version EN 29295:1991) |
| DIN EN 293-1992 |
油壓噴霧器噴嘴.最低要求.檢驗 |
(Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992) |
| DIN EN 2930-1996 |
航空和航天.耐高溫鎳基合金NI-P101HT(Waspaloy一種耐高溫?zé)徭嚮辖?制鍍銀長螺紋細螺桿十二角螺絲釘.等級: |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 C; German version EN 2930:1996) |
| DIN EN 2931-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制長螺紋扁柄T型頭螺絲.等級:900MPa(室溫)650攝氏度 |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2931:1994) |
| DIN EN 29313-1992 |
點焊設備.冷卻管 |
(Resistance spot welding equipment; cooling tubes (ISO 9313:1989); german version EN 29313:1992) |
| DIN EN 29314-1-1993 |
信息處理系統.光纖分布數據接口(FDDI).第1部分:物理層協議(PHY) |
(Information processing systems; fibre distributed date interface (FDDI); part 1: token ring physical layer protocol (PHY) (ISO 9314-1:1989); English version EN 29314-1:1993) |
| DIN EN 29314-2-1993 |
信息處理系統.光纖排列數據的接口(FDDI).第2部分:令牌環媒存取控制方法 |
(Information processing systems; fibre distributed date interface (FDDI); part 2: token ring media access control (MAC) (ISO 9314-2:1989); English version EN 29314-2-1993) |
| DIN EN 29315-1993 |
信息處理系統.軟驅和它的控制器之間的接口 |
(Information processing systems - Interface between flexible disk cartridge drives and their host controllers (ISO 9315:1989); English version EN 29315:1992) |
| DIN EN 29318-2-1993 |
信息技術.智能外圈接口.第2部分:磁盤驅動器專用指令集 |
(Information technology - Intelligent peripheral interface - Part 2: device specific command set for magnetic disk drives (ISO/IEC 9318-2:1990); English version EN 29318-2:1993) |
| DIN EN 29318-3-1993 |
信息技術.智能外圍接口.第3部分:磁盤驅動器總指令集 |
(Information technology - Intelligent peripheral interface - Part 3: device generic command set for magnetic and optical disk drives (ISO/IEC 9318-3:1990); English version EN 29318-3:1993) |
| DIN EN 29318-4-1993 |
信息技術.智能外圍接口.第4部分:磁帶驅動器的指令集 |
(Information technology; intelligent peripheral interface; part 4: device generic command set for magnetic tape drives (ISO/IEC 9318-4:1990); English version EN 29318-4:1993) |
| DIN EN 2932-1996 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細螺桿T字頭螺絲釘.等級:900Mpa(室溫外)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2932:1996) |
| DIN EN 2933-1996 |
航空和航天.耐高溫鎳基合金HI-P100HT(因康鎳718)制長螺紋,細桿,T字頭螺栓.等級:1275MPa(室溫下)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2933:1996) |
| DIN EN 29333-1992 |
鑲牙材料 |
(Dental brazing materials (ISO 9333:1990); german version EN 29333:1991) |
| DIN EN 2934-1996 |
航空和航天.耐高溫鎳基合金HI-P100HT(因康鎳718)制長螺紋,細桿,鍍銀,T字頭螺栓.等級:1275MPa(室溫下)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2934:1996) |
| DIN EN 2935-1996 |
航空和航天.耐高溫鎳基合金HI-P101HT(沃斯帕落伊合金)制長螺紋,細桿,T字頭螺栓.等級:1210MPa(室溫下)/730℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 2935:1996) |
| DIN EN 2936-1996 |
航空和航天.耐高溫鎳基合金HI-P101HT(沃斯帕落伊合金)制長螺紋,細桿,鍍銀,T字頭螺栓.等級:1210MPa(室溫下)/ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 C; German version EN 2936:1996) |
| DIN EN 29367-1-1994 |
滾裝船上汽車?yán)壓凸潭ㄑb置.一般要求.第1部分:商業用車和車輛組合,半掛車除外 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989); German version EN 29367-1:1993) |
| DIN EN 29367-2-1995 |
滾裝船上汽車?yán)壓凸潭ㄑb置.一般要求.第2部分:半掛車 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994); German version EN 29367-2:1994) |
| DIN EN 2937-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制全螺紋六角頭螺絲.等級:900MPa(室溫)650攝氏度 |
(Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2937:1994) |
| DIN EN 2938-1995 |
航空和航天.鍍銀FE-PA92HT(A286)耐高溫鋼制螺紋到底部的六角螺釘.等級:900MPa(室溫下)/650℃ |
(Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2938:1995) |
| DIN EN 2939-1994 |
航空和航天.耐高溫鋼FE-PA92HT(A286)制全螺紋翼型十字槽100度沉頭螺絲.等級:900MPa(室溫)650攝氏度 |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2939:1994) |
| DIN EN 294-1992 |
機器的安全性.防止上肢觸及危險位置的安全距離 |
(Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs; german version EN 294:1992) |
| DIN EN 2940-1995 |
航空和航天.鍍銀FE-PA92HT(A286)耐高熱鋼制螺紋到頂部翼形十字槽100度沉頭螺釘.等級:900MPa(室溫下)/650℃ |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2940:1995) |
| DIN EN 2942-1998 |
航空和航天.鍍銀,自鎖,耐高溫鎳基合金NI-PH2801(因康X750)制金屬絲螺紋插件 |
(Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998) |
| DIN EN 2943-1998 |
航空和航天.自鎖繞線螺紋插件.交貨技術條件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification; German version EN 2943:1998) |
| DIN EN 2944-1998 |
航空和航天.自鎖,耐蝕鋼FE-PA3004制金屬絲螺紋插件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004; German version EN 2944:1998) |
| DIN EN 2945-1998 |
航空和航天.自鎖金屬絲螺紋插件.安裝方法 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure; German version EN 2945:1998) |
| DIN EN 29454-1-1994 |
軟焊劑.分類和要求.第1部分:分類、加標簽和包裝 |
(Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990); German version EN 29454-1:1993) |
| DIN EN 29455-1-1994 |
軟釬劑.試驗方法.第1部分:不揮發性物質的測定.重量分析法 |
(Soft soldering fluxes; test methods; part 1: determination of non-volatile matter, gravimetric method (ISO 9455-1:1990); German version EN 29455-1:1993) |
| DIN EN 29455-11-1994 |
軟釬焊劑.試驗方法.第11部分:釬焊劑殘留物的可溶性 |
(Soft soldering fluxes; test methods; part 11: solubility of flux residues (ISO 9455-11:1991); German version EN 29455-11:1993) |
| DIN EN 29455-14-1994 |
軟釬焊劑.試驗方法.第14部分:釬焊劑殘留物膠粘度測定 |
(Soft soldering fluxes; test methods; part 14: assessment of tackiness of flux residues (ISO 9455-14:1991); German version EN 29455-14:1993) |
| DIN EN 29455-5-1994 |
軟釬焊劑.試驗方法.第5部分:銅鏡試驗 |
(Soft soldering fluxes; test methods; part 5: copper mirror test (ISO 9455-5:1992); German version EN 29455-5:1993) |
| DIN EN 29455-8-1994 |
軟釬焊劑.試驗方法.第8部分:鋅含量測定 |
(Soft soldering fluxes; test methods; part 8: determination of zinc content (ISO 9455-8:1991); German version EN 29455-8:1993) |
| DIN EN 2948-1996 |
航空和航天.鈍化耐高溫鋼制有耳鎖緊墊圈 |
(Aerospace series - Washers, tab, in heat resisting steel, passivated; German version EN 2948:1996) |
| DIN EN 2949-1996 |
航空和航天.鈍化耐蝕鋼制鎖緊墊圈 |
(Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated; German version EN 2949:1996) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com