標準號 |
中文名稱 |
英文名稱 |
| EN ISO 19954-2003 |
鞋整鞋的試驗方法在家用洗衣機中的可洗性 |
Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003) |
| EN ISO 19956-2004 |
鞋靴.鞋跟的試驗方法.耐疲勞性 |
|
| EN ISO 19957-2004 |
鞋靴.鞋跟的試驗方法.鞋跟釘的保持力 |
|
| EN ISO 19958-2004 |
鞋靴.鞋跟和頂部的試驗方法.頂部保持力 |
|
| EN ISO 2009-1994 |
開槽沉頭螺釘(通用頭型)產品等級A |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994) |
| EN ISO 2010-1994 |
開槽半沉頭螺釘(通用頭型)產品等級A |
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994) |
| EN ISO 20344-2004 |
個人防護設備.鞋靴的試驗方法 |
|
| EN ISO 20345-2004 |
個人防護設備.安全鞋靴 |
|
| EN ISO 20346-2004 |
個人防護設備.防護鞋 |
|
| EN ISO 20347-2004 |
個人防護設備.專業鞋 |
|
| EN ISO 2039-1-2003 |
塑料硬度測定第1部分：壓球法 |
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
| EN ISO 2039-2-1999 |
塑料硬度測定第2部分：洛氏硬度 |
Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN ISO 20482-2003 |
金屬材料板材及帶材伊利森(Erichsen)壓杯試驗 |
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003) |
| EN ISO 2060-1995 |
紡織品卷裝紗用絞紗法測定線密度(單位長度的質量) |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| EN ISO 2061-1995 |
紡織品紗線捻度的測定直接計數法 |
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:1995) |
| EN ISO 2062-1995 |
紡織品從包裝抽取紗線單端斷裂力和斷裂伸長的測定 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993) |
| EN ISO 2064-2000 |
金屬和其他無機覆蓋層厚度測量的定義和一般要求 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN ISO 20645-2004 |
紡織織物.抗菌活性的測定.瓊脂擴散木片試驗 |
|
| EN ISO 20763-2004 |
石油和相關產品.液壓液耐磨性能的測定.葉片泵法 |
|
| EN ISO 20823-2003 |
石油和石油產品 與熱表面接觸時流體的易燃特性的測定 多種形式的點燃試驗 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surface (ISO 20823-2003) |
| EN ISO 20843-2003 |
石油及石油產品HFA(六氟丙酮)HFAS和HFC流體中阻燃液PH值的測定 |
Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003) |
| EN ISO 20844-2004 |
石油及其相關產品.利用柴油噴射器嘴測定含聚合物油的剪切穩定性 |
|
| EN ISO 20846-2004 |
石油產品.機動車燃料中硫含量的測定.紫外線熒光法 |
|
| EN ISO 20847-2004 |
石油產品.機動車燃料中硫含量的測定.能量分散X射線熒光光譜法 |
|
| EN ISO 20884-2004 |
石油產品.機動車燃料中硫含量的測定.波長分散X射線熒光光譜法 |
|
| EN ISO 21049-2004 |
泵.離心和旋轉泵用軸密封系統 |
|
| EN ISO 2114-2000 |
塑料（聚酯樹脂）、色漆和清漆（膠粘合劑）部分酸值和總酸值的測定 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000) |
| EN ISO 21227-1-2003 |
油漆和清漆用光學成像法評價涂漆表面的缺陷第1部分：一般指南 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
| EN ISO 21269-2004 |
帶米制精細齒距螺紋的六角凹頭螺釘 |
|
| EN ISO 21329-2004 |
石油和天然氣工業.管道運輸系統.機械連接器的試驗過程 |
|
| EN ISO 2151-2004 |
聲學.壓縮機和真空泵用噪音試驗規程.工程法(2級) |
|
| EN ISO 21530-2004 |
牙科學.牙科器械表面用材料.耐化學消毒劑的測定 |
|
| EN ISO 21533-2003 |
牙科學可反復使用的牙韌帶注射 器 |
Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003) |
| EN ISO 21549-1-2004 |
醫療信息學.病人健康卡數據.第1部分:通用結構 |
|
| EN ISO 21549-2-2004 |
醫療信息學.病人健康卡數據.第2部分:通用對象 |
|
| EN ISO 21549-3-2004 |
醫療信息學.病人健康卡數據.第3部分:受限的臨床數據 |
|
| EN ISO 21567-2004 |
食品和動物飼料的微生物學.志賀氏桿菌檢測的水平法 |
|
| EN ISO 2157-1995 |
牙科旋轉器械公稱直徑和命名代碼 |
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992) |
| EN ISO 21572-2004 |
食品.轉基因有機物和衍生產品的檢測方法.基于蛋白質的方法 |
|
| EN ISO 216-2001 |
書寫紙和某些印刷紙裁切后尺寸A和B系列 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216:1975) |
| EN ISO 2160-1998 |
石油產品對銅的腐蝕性銅片腐蝕試驗 |
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 2162-1-1996 |
技術產品文件彈簧第1部分：簡化表示法 |
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993) |
| EN ISO 2162-2-1996 |
技術產品文件彈簧第2部分：圓柱螺旋形壓力彈簧數據的表示 |
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993) |
| EN ISO 2162-3-1996 |
技術產品文件彈簧第3部分：詞匯 |
Technical product documentation - Springs - Part 3: Vocabulary (ISO 2162-3:1993) |
| EN ISO 21647-2004 |
醫用電氣設備.呼吸氣監測器的基本安全和性能的特殊要求 |
|
| EN ISO 21670-2003 |
帶凸緣的六角焊接螺母 |
Hexagon weld nuts with flange (ISO 21670:2003) |
| EN ISO 2177-1994 |
金屬覆蓋層覆蓋層厚度測量陽極溶解庫侖法 |
Metallic coatings - Measurement of coating thickness - Coulometer method by anodic dissolution (ISO 2177:1985) |
| EN ISO 2177-2004 |
金屬鍍層.鍍層厚度的測量.陽極分解的電量計法 |
|
| EN ISO 2178-1995 |
磁性機體上的非磁性覆蓋層覆蓋層厚度的測量磁性法 |
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982) |
| EN ISO 2203-1997 |
技術制圖齒輪的習慣畫法 |
Technical drawings - Conventional representation of gears (ISO 2203:1973) |
| EN ISO 2231-1995 |
橡膠或塑料涂覆織物狀態調節和試驗的標準環境 |
Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
| EN ISO 2233-2001 |
包裝滿裝的運輸包裝和單貨物試驗條件 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000) |
| EN ISO 2234-2002 |
包裝 滿裝運輸包裝和單件貨物 靜載荷法堆積試驗 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000) |
| EN ISO 2244-2002 |
包裝 滿裝運輸包裝和單件貨物 水平沖擊試驗 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000) |
| EN ISO 2247-2002 |
包裝 滿裝運輸包裝和單件貨物 固定低頻振動試驗 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000) |
| EN ISO 228-1-2003 |
非螺紋密封的管螺紋第1部分：標記、尺寸和公差 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN ISO 228-2-2003 |
非螺紋密封的管螺紋第2部分：用極限量規檢驗 |
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
| EN ISO 2286-1-1998 |
橡膠或塑料涂覆織物整卷特性測定第1部分：長度、寬度和凈重的測定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998) |
| EN ISO 2286-2-1998 |
橡膠或塑料涂覆織物整卷特性測定第2部分：單位面積總質量、單位面積涂膠量和襯底單位面積質量的測定方 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998) |
| EN ISO 2286-3-1998 |
橡膠或塑料涂覆織物整卷特性測定第3部分：厚度測定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998) |
| EN ISO 2320-1997 |
有效力矩型鋼六角鎖緊螺母機械和工作性能 |
Prevailing torque type steel hexagon nuts - Mechanical and performance requirements (ISO 2320:1997) |
| EN ISO 2338-1997 |
不淬硬鋼和奧氏體不銹鋼圓錐銷 |
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
| EN ISO 23429-2004 |
六角凹頭量規 |
|
| EN ISO 2360-1995 |
非磁性基金屬上非導電涂層鍍層厚度的測量渦流法 |
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982) |
| EN ISO 2361-1995 |
磁性和非磁性基體上的鎳電度層鍍層厚度的測量磁性法 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN ISO 2398-1997 |
織物增強的壓縮空氣用橡膠軟管規范 |
Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) |
| EN ISO 2409-1994 |
色漆和清漆劃格試驗 |
Paints and varnishes - Cross-cut test (ISO 2409:1992) |
| EN ISO 2411-2000 |
橡膠或塑料涂覆織物涂層粘合強度的測定 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000) |
| EN ISO 2417-2002 |
皮革物理與機械性的試驗靜態吸水性的測定 |
Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2002) |
| EN ISO 2418-2002 |
皮革化學、物理和機械性與色牢度的測試取樣部位 |
Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002) |
| EN ISO 2419-2002 |
皮革物理與機械性的試驗樣品準備和調節 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2002) |
| EN ISO 2420-2002 |
皮革物理與機械性的試驗視密度的測定 |
Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002) |
| EN ISO 24234-2004 |
牙醫學.牙科用汞齊合金用汞及合金 |
|
| EN ISO 2439-2000 |
軟質泡沫聚合材料硬度的測定（壓痕法） |
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998) |
| EN ISO 2440-1999 |
軟質和硬質泡沫聚合材料加速老化試驗 |
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997) |
| EN ISO 2450-1999 |
奶油脂肪含量的測定重量分析法(參照法) |
Cream - Determination of fat content - Gravimetric method (Reference method) (ISO 2450:1999) |
| EN ISO 2495-2000 |
鐵藍顏料規范和測試方法 |
Iron blue pigments - Specifications and methods of test (ISO 2495:1995) |
| EN ISO 252-1-1999 |
織物傳輸帶層與層之間的粘合強度第1部分：試驗方法 |
Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test (ISO 252-1:1999) |
| EN ISO 2535-2002 |
塑料不飽和聚脂樹脂25℃時膠凝時間的測量 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001) |
| EN ISO 2538-2003 |
產品幾何量技術規范(GPS)棱體的角度和斜度系列 |
Geometrical product specifications (GPS) - Series of angles and slopes on prisms (ISO 2583:1998) |
| EN ISO 2554-1998 |
塑料不飽和聚脂樹脂羥基值的測定 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997) |
| EN ISO 2555-1999 |
塑料液態或乳態或分散狀樹脂用落球式粘度計測定表觀粘度 |
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989) |
| EN ISO 2556-2000 |
塑料在大氣壓力下薄膜和薄板的透氣率的測定測壓法 |
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974) |
| EN ISO 2566-1-1999 |
鋼伸長值的換算第1部分：碳素鋼和低合金鋼 |
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 2566-2-1999 |
鋼伸長值的換算第2部分：奧氏體鋼 |
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
| EN ISO 2578-1998 |
塑料長期熱暴露作用后時間和溫度極限的測定 |
Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993) |
| EN ISO 2580-1-2002 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和擠塑材料第1部分：命名系統和基本規范 |
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002) |
| EN ISO 2580-2-1999 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和擠塑材料第2部分：試樣的制備和性能的測定 |
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994) |
| EN ISO 2589-2002 |
皮革物理與機械性的試驗厚度的測量 |
Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2002) |
| EN ISO 2592-2001 |
閃點和燃點的測定克利夫開口杯法 |
Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) |
| EN ISO 2624-1995 |
銅和銅合金平均晶粒度的測定方法 |
Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN ISO 2626-1995 |
銅氫脆試驗 |
Copper - Hydrogen embrittlement test (ISO 2626:1973) |
| EN ISO 2639-2002 |
鋼滲碳層和硬化層的深度的測定和檢驗 |
Steel - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
| EN ISO 266-1997 |
聲學優先頻率 |
Acoustics - Preferred frequencies (ISO 266:1997) |
| EN ISO 2702-1994 |
熱處理鋼自攻螺釘機械性能 |
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992) |
| EN ISO 2719-2002 |
閃點的測定 賓斯克-馬丁閉口杯法 |
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002) |
| EN ISO 2738-1999 |
燒結金屬材料不包括硬質金屬密度、含油量和開口率的測定 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999) |
| EN ISO 2739-1998 |
燒結金屬襯套徑向抗壓強度的測定 |
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:1973) |
| EN ISO 2740-1999 |
燒結金屬材料不包括硬質金屬拉伸試樣 |
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:1999) |
| EN ISO 2758-2003 |
紙 抗破裂強度的測定 |
Paper - Determination of bursting strength (ISO 2758:2001) |
| EN ISO 2759-2003 |
紙板 抗破裂強度的測定 |
Board - Determination of bursting strength (ISO 2759:2001) |
| EN ISO 2789-2003 |
信息和文獻國際標準圖書館統計學 |
Information and documentation - International library statistics (ISO 2789:2003) |
| EN ISO 2808-1999 |
色漆和清漆清膜厚度的測定 |
Paints and varnishes - Determination of film thickness (ISO 2808:1997) |
| EN ISO 2810-2004 |
涂料和清漆.涂層的自然老化.暴露和評估 |
|
| EN ISO 2811-1-2001 |
色漆和清漆密度的測定第1部分：比重瓶法 |
Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997) |
| EN ISO 2811-2-2001 |
色漆和清漆密度的測定第2部分：落球法 |
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:1997) |
| EN ISO 2811-3-2001 |
色漆和清漆密度的測定第3部分：潛體法 |
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:1997) |
| EN ISO 2811-4-2001 |
色漆和清漆密度的測定第4部分：壓杯法 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997) |
| EN ISO 2812-1-1994 |
色漆和清漆耐液體的測定第1部分 ：通用方法 |
Paints and varnishes - Determination of resistance to liquids - Part 1: General methods (ISO 2812-1:1993) |
| EN ISO 2812-2-1994 |
色漆和清漆耐液體的測定第2部分：水浸法 |
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:1993) |
| EN ISO 2813-1999 |
色漆和清漆在20 °、60 °和85 °非金屬漆膜鏡面光澤的測定 |
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 °60 °und 85 °(ISO 2813:1994, including Technical Corrigendum 1:1997) |
| EN ISO 2815-2003 |
色漆和清漆巴克霍爾壓痕試驗 |
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN ISO 2818-1996 |
塑料試樣的機加工制備 |
Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| EN ISO 2819-1994 |
金屬基體上的金屬層覆蓋層電鍍和化學沉積層附著力試驗方法評述 |
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980) |
| EN ISO 283-1-2000 |
織物傳輸帶全后度拉伸試驗第1部分：在標準負荷下拉伸強度、拉斷伸長及定伸的測定 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load (ISO 283-1:2000) |
| EN ISO 284-2003 |
傳輸帶導電率規范和試驗方法 |
Conveyor belts - Electrical conductivity - Specification and test methodes (ISO 284:2003) |
| EN ISO 2860-1999 |
土方機械最小人口尺寸 |
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
| EN ISO 2867-1998 |
土方機械通道裝置 |
Earth-moving machinery - Access systems (ISO 2867:1994) |
| EN ISO 2870-1994 |
表面活性劑洗滌劑酸性條件下可水解的和不可水解的陰離子活性物的測定 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions (ISO 2870:1986) |
| EN ISO 2871-1-1994 |
表面活性劑洗滌劑陽離子活性物含量的測定第1部分：高分子質量陽離子活性物 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1-1988) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com