標準號 |
中文名稱 |
英文名稱 |
| EN 61010-2-045-2000 |
測量、控制和實驗室用電氣設備的安全要求第2－045部分：醫療、制藥、獸醫和試驗室用洗滌器消毒的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (IEC 61010-2-045:2000) |
| EN 61010-2-051-1995 |
測量、控制和實驗室用電氣設備的安全要求第２－５１部分：機械攪拌用實驗室設備的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mechanical mixing and stirring (IEC 61010-2-051:1995) |
| EN 61010-2-061-1996 |
測量、控制和實驗室用電氣設備的安全要求第２－６１部分：具有熱原子化和離子化的試驗室用原子能譜儀的特 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:1995) |
| EN 61010-2-081-2002 |
測量、控制和實驗室用電氣設備的安全要求第２－８１部分：分析和其他用途的自動及半自動試驗室設備的特殊 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001) / Note: Endorsemen |
| EN 61010-2-081/prA1-2003 |
測量、控制和實驗室用電氣設備的安全要求第２－８１部分：分析和其他用途的自動及半自動試驗室設備的特殊 |
IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
| EN 61010-2-101-2002 |
測量、控制和實驗室用電氣設備的安全要求第2-101部分：生物體外診斷(IVD)醫療設備的特殊要求 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified) |
| EN 61011-1-1992 |
與供電干線連接的電池供電的電牧欄增能器的安全要求 |
Electric fence energizers; safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains (IEC 61011-1:1989, modified) |
| EN 61011-1992 |
電牧欄增能器電網供電的電牧欄增能器的安全要求 |
Electric fence energizers; safety requirements for mains-operated electric fence energizers (IEC 61011:1989, modified) |
| EN 61011-2-1992 |
不與供電干線連接的電池供電的電牧欄增能器的安全要求 |
Electric fence energizers; safety requirements for battery-operated electric fence energizers not for connection to the supply mains (IEC 61011-2:1990, modified) |
| EN 61012-1998 |
伴有超聲情況下可聽聲測量用濾波器 |
Filters for the measurement of audible sound in the presence of ultrasound (IEC 61012:1990) |
| EN 61014-2003 |
可靠性增長大綱 |
Programmes for reliability growth (IEC 61014:2003) / Note: Endorsement notice |
| EN 61016-2001 |
使用１９mm磁帶（Ｄ－１格式）的螺旋掃描數字化器件盒式錄像帶錄像系統 |
Helical-scan digital component video cassette recording system using 19 mm magnetic tape, (format D-1) (IEC 61016:1998 + A1:1999) |
| EN 61019-2-1997 |
表面聲波(saw)諧振器第2部分：使用指南 |
Surface acoustic wave (SAW) resonators - Part 2: Guide to the use (IEC 61019-2:1995) |
| EN 61021-1-1997 |
電信和電氣設備用的變壓器和電感器的疊片鐵心包第1部分：尺寸 |
Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions (IEC 61021-1:1990) |
| EN 61021-2-1997 |
電信和電氣設備用的變壓器和電感器的疊片鐵心包第2部分：用YEE 2 疊片鐵芯的電性能 |
Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations (IEC 61021-2:1995) |
| EN 61023-1999 |
測量航船速度和距離的設備(SDME)性能要求試驗方法 和要求的試驗結果 |
Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing and required test results (IEC 61023:1999) |
| EN 61027-1993 |
聲學阻抗/導納測量用儀器 |
Instruments for the measurement of aural acoustic impedance/admittance (IEC 61027:1991) |
| EN 61029-2-1-2002 |
移動式電動工具的安全第2－1部分：圓鋸的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified) |
| EN 61029-2-5-2002 |
移動式電動工具的安全第2-5部分：帶狀鋸的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified) |
| EN 61029-2-9-2002 |
移動式電動工具的安全第2-9部分：斜切鋸的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified) |
| EN 61030-1993 |
音頻、視頻和視聽系統用家用數字總線(D２B) |
Audio, video and audiovisual systems; domestic digital bus (D2B) (IEC 61030:1991 + A1:1993) |
| EN 61032-1998 |
用外殼對人體和設備的防護林檢驗用探頭 |
Protection of persons and equipment by enclosures - Probes for verification (IEC 61032:1997) |
| EN 61040-1992 |
激光輻射功率和能量測量探測器、儀表和設備 |
Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990) |
| EN 61041-1-1995 |
非播放用錄像機測量方法第１部分：通用視頻(NTSC/PAL)和聲頻(縱向)特性 |
Non-broadcast video tape recorders - Methods of measurement - Part 1: General video (NTSC/PAL) and audio (longitudinal) characteristics (IEC 61041-1:1990) |
| EN 61041-2-1996 |
非廣播用磁錄像機測量方法第２部分：SECAM錄像機色度特性 |
Non-broadcast video tape recorders - Methods of measurement - Part 2: Video characteristics chrominance SECAM (IEC 61041-2:1994) |
| EN 61041-3-1995 |
非廣播用錄像機測量方法第３部分：用FM信號錄音聲頻特性 |
Non-broadcast videotape recorders - Methods of measurement - Part 3: Audio characteristics for FM recording (IEC 61041-3:1993) |
| EN 61041-4-1997 |
非廣播用錄像機測量方法第４部分：校準帶（ＮＴＳＣ／ＰＡＬ／ＳＥＣＡＭ） |
Non-broadcast video tape recorders - Methods of measurement - Part 4: Calibration tape (NTSC/PAL/SECAM) (IEC 61041-4:1997) |
| EN 61041-5-1997 |
非廣播用錄像機測量方法第５部分：高頻磁帶錄像機其中包括那些配有Ｙ／Ｃ圖像連接器（ＮＴＳＣ／ＰＡ |
Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL) (IEC 61041-5:1997) |
| EN 61043-1994 |
電聲學聲強測量儀壓強傳聲器配對的測量 |
Electroacoustics; Instruments for the measurement of sound intensity; Measurement with pairs of pressure sensing microphones (IEC 61043:1993) |
| EN 61044-1992 |
牽引用鋁酸蓄電池組的利用機會充電 |
Opportunity-charging of lead-acid traction batteries (IEC 61044:1990) |
| EN 61047-2004 |
鎢絲燈用直流或交流供電電子降壓轉換器.性能要求 |
|
| EN 61049-1993 |
管形熒光燈和其它放電燈電路用電容器的性能要求規范 |
Capacitors for use in tubular fluorescent and other discharge lamp circuits; performance requirements (IEC 61049:1991 + corrigendum 1992, modified) |
| EN 61056-1-2003 |
一般用鉛酸蓄電池(閥調節型)第1部分：一般要求、功能特性試驗方法 |
General purpose lead-acid batteries (valve regulated types) - Part 1: General requirements, functional characteristics, methods of test (IEC 61056-1:2002) / Note: Endorsement notice |
| EN 61056-2-2003 |
一般用鉛酸蓄電池(閥調節型)第2部分：尺寸、端子和標記 |
General purpose lead-acid batteries (valve regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002) / Note: Endorsement notice |
| EN 61057-1993 |
帶電作業用帶絕緣臂的高架裝置 |
Aerial devices with insulating boom used for live working exceeding 1 kV a.c. (IEC 61057:1991, modified) |
| EN 61058-1-2002 |
電器開關第1部分：通用要求 |
Switches for appliances - Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified) / Note: Endorsement notice |
| EN 61061-1-1998 |
電工用非浸漬致密層合木板第１部分：定義、名稱及一般要求 |
Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements (IEC 61061-1:1998) |
| EN 61061-3-1-1998 |
電工用非浸漬致密層合木板第３部分：單項材料規范活頁１：由山毛櫸薄片制成的片材制品 |
Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheets 1: Sheets produced from beech veneer (IEC 61061-3-1:1998) |
| EN 61061-3-2-2001 |
電工用非浸漬致密層合木板第３部分：單項材料規范活頁２：由山毛櫸薄片制成的環型材制品 |
Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Rings produced from beech veneer (IEC 61061-3-2:2001) |
| EN 61063-1996 |
聲學汽輪機和被驅動機械發出的空氣傳播噪音的測量 |
Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery (IEC 61063:1991) |
| EN 61064-1993 |
汽輪機速度控制系統驗收試驗 |
Acceptance tests for steam turbine speed control systems (IEC 61064:1991) |
| EN 61065-1993 |
老化后礦物絕緣油低溫流動特性的評定方法 |
Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991) |
| EN 61067-1-1997 |
玻璃和玻璃聚酯纖維編織帶規范第1部分：定義、分類和一般要求 |
Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991) |
| EN 61067-2-1997 |
玻璃和玻璃聚酯纖維編織帶成第2部分：試驗方法 |
Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992) |
| EN 61067-3-1-1995 |
玻璃和玻璃聚酯纖維編織帶第3部分：單項材料規范活頁1：1,2,3 型織帶 |
Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995) |
| EN 61068-1-1997 |
聚酯纖維機織帶第1部分：定義、名稱和一般要求 |
Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991) |
| EN 61068-2-1997 |
聚酯纖維編織帶規范第2部分：試驗方法 |
Specification for polyester fibre woven tapes - Part 2: Methods of test (IEC 61068-2:1991) |
| EN 61068-3-1-1995 |
聚酯纖維編織帶第3部分：單項材料規范活頁1：常規織機或無梭織機編織帶 |
Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms (IEC 61068-3-1:1995) |
| EN 61069-1-1993 |
工業過程測量和控制系統評估用系統特性的評定第1部分：一般考慮和方法學 |
Industrial-process measurement and control- Evaluation of system properties for the purpose of system assessment; Part 1: General considerations and methodology (IEC 61069-1:1991) |
| EN 61069-2-1994 |
工業過程測量和控制系統評估用系統特性的評定第2部分：評估方法學 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology (IEC 61069-2:1993) |
| EN 61069-3-1996 |
工業過程測量和控制系統評估用系統特性的評定第3部分：系統功能性的評估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (IEC 61069-3:1996) |
| EN 61069-4-1997 |
工業過程測量和控制系統評估用系統特性的評定第4部分：系統性能評估 |
Industrial process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance (IEC 61069-4:1997) |
| EN 61069-5-1995 |
工業過程測量和控制系統評估用系統特性的評定第5部分：系統可靠性評估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability (IEC 61069-5:1994) |
| EN 61069-6-1998 |
工業過程測量和控制系統評估用系統特性的評定第6部分：系統可操作性能評估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability (IEC 61069-6:1998) |
| EN 61069-7-1999 |
工業過程測量和控制系統評估用系統特性的評定第7部分：系統安全評估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety (IEC 61069-7:1999) |
| EN 61069-8-1999 |
工業過程測量和控制系統評估用系統特性的評定第8部分：非任務相關系統性能的評估 |
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999) |
| EN 61071-1-1996 |
電力電子電容器第1部分：總則 |
Power electronic capacitors - Part 1: General (IEC 61071-1:1991, modified) |
| EN 61071-2-1996 |
電力電子電容器第2部分：熔絲隔離試驗、破壞試驗、自愈試驗和耐久性試驗的要求 |
Power electronic capacitors - Part 2: Requirements for disconnecting test on fuses, destruction test, self-healing test and endurance test (IEC 61071-2:1994) |
| EN 61073-1-2000 |
光纖光纜機械式接頭和熔接式接頭保護盒第1部分：通用規范 |
Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification (IEC 61073-1:1999) |
| EN 61074-1993 |
用差示掃描量熱法測定電氣絕緣材料熔融及結晶的熱量和溫度 |
Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991) |
| EN 61075-1993 |
船用羅蘭C接收機最低性能標準試驗方法和要求的測試結果 |
Loran-C receivers for ships - Minimum performance standards - Methods of testing and required test results (IEC 61075:1991) |
| EN 61076-1-1995 |
經質量評定的、用于直流低頻模擬和數字式高速數據設備連接器第1部分：通用規范 |
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification (IEC 61076-1:1995) |
| EN 61076-2-001-2001 |
電子設備用連接器第2-001部分：圓形連接器空白詳細規范 |
Connectors for electronic equipment - Part 2-001: Circular connectors; Blank detail specification (IEC 61076-2-001:2001) |
| EN 61076-2-102-2002 |
電子設備用連接器第2-102部分：經質量評定的圓形連接器外部低壓電源用插頭插座的詳細規范 |
Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality; Detail specification for plugs and jacks for external low voltage power supply (IEC 61076-2-102:2002) / Note: Endorsement notice |
| EN 61076-2-103-2004 |
電子設備連接器.第2-103部分:圓形連接器.一系列多極連接器的詳細規范(XLR型) |
|
| EN 61076-2-1999 |
直流低頻模擬及數字高速數據應用系統用連接器第2 部分：有質量評定的圓形連接器分規范 |
Connectors for use in d.c. low-frequency analogue and digital high-speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification (IEC 61076-2:1998) |
| EN 61076-3-001-2000 |
直流低頻模擬及數字高速數據應用系統用連接器第3-001部分：有質量評估的矩形連接器空白詳細規范 |
Connectors for use in d.c., low-frequency analogue, and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality - Blank detail specification (IEC 61076-3-001:1999) |
| EN 61076-3-100-2000 |
直流低頻模擬及數字高速數據應用系統用連接器第3-100部分：有質量評估的矩形連接器帶有1.27mm雙排不可 |
Connectors for use in d.c., low- frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-remova |
| EN 61076-3-101-1997 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第3部分：矩形連接器第101節：在1.27mm X 1.5 |
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells an |
| EN 61076-3-103-2004 |
電子設備連接器.第3-103部分:矩形連接器.用于高速串聯數據的帶1.25mm間距不可拆卸帶狀電纜觸點的單排連接器的詳細規范 |
|
| EN 61076-3-104-2003 |
電子設備用連接器第3-104部分：矩形連接器數據傳輸頻率在600 MHz以內的8向非屏蔽固定式連接器的詳細規 |
Connectors for electronic equipment - Part 3-104: Rectangular connectors; Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum (IEC 61076-3-104:2003) / Note: Endorsement notice |
| EN 61076-3-2000 |
直流低頻模擬及數字高速數據應用系統用連接器第3部分：有質量評估的矩形連接器分規范 |
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification (IEC 61076-3:1999) |
| EN 61076-4-001-1996 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第4部分：印制板連接器第001節：空白詳細規范 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification (IEC 61076-4-001:1996) |
| EN 61076-4-100-2001 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第4部分：印制板連接器第100節：印制電路板和 |
Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality; Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001) |
| EN 61076-4-101-2001 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第4部分：印制板連接器第101節：符合IEC 6091 |
Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 61076- |
| EN 61076-4-102-1997 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第4部分：印制板連接器第102節：符合IEC 6091 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in |
| EN 61076-4-103-1999 |
直流低頻模擬及數字高速數據應用系統用連接器第4-103部分：有質量評估的印制板連接器具有屏蔽罩和基本 |
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-1 |
| EN 61076-4-104-1999 |
直流低頻模擬及數字高速數據應用系統用連接器第4-104部分：有質量評估的印制板連接器基本網格為2.0mm、 |
Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed boards connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a m |
| EN 61076-4-105-1998 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第4部分：印制板連接器第105節：供包括通信和 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide |
| EN 61076-4-107-2001 |
電子設備用連接器第4-107部分：有質量評定的印制板連接器印制電路板用基本網格為2.0 mm、固定部分帶有 |
Connectors for electronic equipment-part 4-107:Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2, 0 mm, fixed part with solder and press-in terminations for printed boards |
| EN 61076-4-108-2002 |
電子設備用連接器第4-108部分：有質量評定的印制板連接器符合IEC 60917-1標準的組件螺距為25 mm并具有 |
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing densi |
| EN 61076-4-110-2002 |
電子設備用連接器第4-110部分：有質量評定的印制板連接器包括完全屏蔽和閉鎖功能的基本網格為2.0mm閉鎖 |
Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001) |
| EN 61076-4-111-2002 |
電子設備用連接器第4-111部分：有質量評定的印制板連接器印制電路板和底板具有預插合特性并且符合IEC 6 |
Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm |
| EN 61076-4-113-2003 |
電子設備用連接器印制電路板連接器第4-113部分：印制電路板和母線底板用帶有5列2.54mm網格的兩件式連接 |
Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002) / Note: Endorsement |
| EN 61076-4-114-2003 |
電子設備用連接器第4-114部分：印制電路板連接器帶有完全屏蔽功能的網格為1 mm x 1.5 mm的兩件式連接器 |
Connectors for electronic equipment - Part 4-114: Printed board connectors; Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm (IEC 61076-4-114:2003) / Note: Endorsement notice |
| EN 61076-4-115-2003 |
電子設備用連接器第4-115部分：印制電路板連接器無限波段設備用底板連接器 |
Connectors for electronic equipment - Part 4-115: Printed board connectors; Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003) / Note: Endorsement notice |
| EN 61076-4-1996 |
有質量評估的直流低頻模擬及數字高速數據應用系統用連接器第4部分：分規范印制板連接器 |
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors (IEC 61076-4:1995) |
| EN 61076-5-2001 |
直流低頻模擬及數字高速數據應用系統用連接器第5部分：有質量評定的聯機插座分規范 |
Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001) |
| EN 61076-6-2004 |
電子設備連接器.第6部分:松散部件觸點.分規范 |
|
| EN 61076-7-001-2004 |
電子設備連接器.第7-001部分:電纜引出端附件.空白詳細規范(IEC 61076-7-001-2004) |
|
| EN 61076-7-2000 |
直流低頻模擬及數字高速數據應用系統用連接器第7部分：有質量評定的包括鑒定和能力批準的電纜引出端附件 |
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval; Sectional specification (IEC 61076-7:2000) |
| EN 61077-1991 |
使用VHS型12.65mm(0.5in)磁帶的螺旋掃描盒式磁帶錄像系統袖珍VHS盒式錄像帶 |
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS-Compact VHS video cassette (IEC 61077:1991) |
| EN 61078-1993 |
可靠性分析技術可靠性方框圖法 |
Analysis techniques for dependability - reliability block diagram method (IEC 61078:1991) |
| EN 61079-1-1993 |
12GHz頻帶衛星廣播傳輸接收機的測量方法第1部分：露天設備的射頻測量 |
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band-Part 1: Radio-frequency measurements on outdoor units (IEC 61079-1:1992) |
| EN 61079-2-1993 |
12GHz頻帶衛星廣播傳輸接收機的測量方法第2部分：DBS調諧設備的電氣測量 |
Methods of measurement on receivers for satellite broadcast transmission in the 12 GHz band-Part 2: Electrical measurements on DBS tuner units (IEC 61079-2:1992) |
| EN 61079-3-1993 |
12GHz頻帶衛星廣播傳輸接收機的測量方法第3部分：包括戶外裝置和DBS調諧裝置的接收系統總性能的電氣測量 |
Methods of measurements on receivers for satellite broadcast transmissions in the 12 GHz band-Part 3: Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit (IEC 61079-3:1993) |
| EN 61079-5-1993 |
12GHz頻帶衛星廣播傳輸接收機的測量方法第5部分：MAC/包系統用解碼器單的電氣測量 |
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band-Part 5: Electrical measurements on decoder units for MAC/packet systems (IEC 61079-5:1993) |
| EN 61082-2-1994 |
電工技術用文件的編制第2部分：功能圖 |
Preparation of documents used in electrotechnology; Part 2: function-oriented diagrams (IEC 61082-2:1993) |
| EN 61082-3-1994 |
電工技術用文件的編制第3部分：接線圖、接線表和接線單 |
Preparation of documents used in electrotechnology; Part 3: connection diagrams, tables and lists (IEC 61082-3:1993) |
| EN 61082-4-1996 |
電工技術用文件的編制第4部分：位置和安裝文件 |
Preparation of documents used in electrotechnology - Part 4: Location and installation documents (IEC 61082-4:1996) |
| EN 61083-1-2001 |
高壓脈沖試驗中測量用數字記錄儀第1部分：數字記錄儀的要求 |
Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001) |
| EN 61083-2-1997 |
高壓脈沖試驗中測量用數字記錄儀第2部分：測定沖擊波形參數用軟件的評估 |
Digital recorders for measurements in high-voltage impulse tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms (IEC 61083-2:1996) |
| EN 61086-1-1994 |
承載印制電路板用涂料(保護涂層)規范第1部分：定義、分類和一般要求 |
Specification for coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements (IEC 61086-1:1992) |
| EN 61086-1-2004 |
承載印制電路板用涂料(敷形涂料).第1部分:定義、分類及一般要求 |
|
| EN 61086-2-1994 |
承載印制電路板用涂料(保護涂層)規范第2部分：試驗方法 |
Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:1992) |
| EN 61086-2-2004 |
承載印制電路板用涂料(敷形涂料).第2部分:試驗方法 |
|
| EN 61086-3-1-1995 |
承載印制電路板用涂料(保護涂層)第3部分：單項材料規范活頁1: 通用(I類)和高可靠性(II類)涂料 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II) (IEC 61086-3-1:1995) |
| EN 61086-3-1-2004 |
承載印制電路板用涂料(敷形涂料).第3-1部分:單項材料規范.通用(1類)、高可靠性(2類)和航空(3類)涂料 |
|
| EN 61094-1-2000 |
測量傳聲器第1部分：實驗室標準傳聲器規范 |
Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000) |
| EN 61094-2-1993 |
測量傳聲器第2部分：用互易技術對實驗室標準傳聲器進行壓力校準的基本方法 |
Measurement microfones; Part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:1992) |
| EN 61094-3-1995 |
測量傳聲器第3部分：用互易技術對實驗室標準傳聲器進行自由場校準的基本方法 |
Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-3:1995) |
| EN 61094-4-1995 |
測量傳聲器第4部分：傳聲器工作標準的規范 |
Measurement microphones - Part 4: Specifications for working standard microphones (IEC 61094-4:1995) |
| EN 61094-5-2001 |
測量傳聲器第5部分：用比較法對工作標準傳聲器進行壓力校準的方法 |
Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001) |
| EN 61097-1-1993 |
全球海上遇險和安全系統(GMDSS)第1部分：雷達應答器海上搜索和營救(SART )操作和性能要求、試驗方法 |
Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder -Marine search and rescue (SART)-Perational and performance requirements, methods of testing and required test results (IEC 61097-1:1992) |
| EN 61099-1992 |
電氣用未使用過的合成有機酯規范 |
Specification for unused synthetic organic esters for electrical purposes (IEC 61099:1992) |
| EN 611-1-1995 |
錫和錫合金 錫鉛合金和錫鉛合金器皿 第1部分：錫鉛合金 |
Tin and tin alloys - Pewter and pewter ware - Part 1: Pewter |
| EN 611-2-1996 |
錫和錫合金 錫鉛合金和錫鉛合金器皿 第2部分：錫鉛合金器皿 |
Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware |
| EN 61100-1992 |
絕緣液體按照著火點和凈熱值的分類 |
Classification of insulating liquids according to fire point and net calorific value (IEC 61100:1992) |
| EN 61101-1993 |
0.5MHz至15MHz頻率范圍內采用平面掃描技術對水聽器的絕對校準 |
The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz (IEC 61101:1991) |
| EN 61104-1992 |
壓縮視盤系統12cm CD-V |
Compact disc video system; 12 cm CD-V (IEC 61104:1992) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com