標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 12957-1-2005 |
土工織物.摩擦特性測定.直接剪切試驗 |
|
| BS EN ISO 12957-1-2005 |
土工織物.摩擦特性測定.直接剪切試驗 |
|
| BS EN ISO 12957-2-2005 |
土工織物.摩擦特性測定.傾斜面試驗 |
|
| BS EN ISO 12957-2-2005 |
土工織物.摩擦特性測定.傾斜面試驗 |
|
| BS EN ISO 12958-1999 |
土工織物及其相關產品.水平水流容量的測定 |
(Geotextiles and geotextile-related products - Determination of water flow capacity in their plane) |
| BS EN ISO 13000-1-1998 |
塑料.聚四氟乙烯(PTFE)半成品.要求和設計 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Requirements and designation) |
| BS EN ISO 13000-2-1998 |
塑料.聚四氟乙烯(PTFE)半成品.試樣的制備和性能的測定 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties) |
| BS EN ISO 13002-1999 |
碳纖維.長絲紗命名體制 |
Carbon fibre - Designation system for filament yarns |
| BS EN ISO 1302-2002 |
產品幾何量技術規范.技術產品文件中表面結構的表示方式 |
Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation |
| BS EN ISO 1307-1996 |
工業通用橡膠和塑料軟管.孔直徑和公差.長度公差 |
(Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length) |
| BS EN ISO 13090-1-1998 |
機械振動和沖擊.試驗及與人有關的實驗安全方面指南.第1部分:機械振動和反復沖擊下的試驗 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Exposure to whole-body mechanical vibration and repeated shock |
| BS EN ISO 13212-1999 |
眼科光學.接觸鏡片保護產品.儲存期限的測定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life |
| BS EN ISO 13230-1999 |
眼科光學.條形碼規范 |
Ophthalmic optics - Bar code specifications |
| BS EN ISO 13294-1997 |
牙鉆手柄.牙鉆氣動機 |
Dental handpieces - Dental air-motors |
| BS EN ISO 13295-1995 |
牙科旋切器.心軸 |
Dental rotary instruments - Mandrels |
| BS EN ISO 13297-2001 |
小船.電氣系統.交流電氣設備 |
Small craft - Electrical systems - Alternating current installations |
| BS EN ISO 13337-1998 |
彈簧型直銷釘.狹縫型,輕負載 |
(Spring-type straight pins - Slotted, light duty) |
| BS EN ISO 13340-2001 |
可運輸燃?xì)馄?非再填充鋼瓶的鋼瓶閥門.規范和原型試驗 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
| BS EN ISO 13341-1998 |
可運輸儲氣瓶.儲氣瓶閥配件 |
Transportable gas cylinders - Fitting of valves to gas cylinders |
| BS EN ISO 13366-1-1997 |
乳.體細胞的計數.第1部分:顯微法 |
Milk - Enumeration of somatic cells - Microscopic method |
| BS EN ISO 13366-2-1997 |
乳.體細胞的計數.第2部分:電子粒子計數法 |
Milk - Enumeration of somatic cells - Method using an electronic particle counter |
| BS EN ISO 13366-3-1997 |
乳.體細胞的計數.第3部分:熒光光電法 |
Milk - Enumeration of somatic cells - Fluoro-opto-electronic method |
| BS EN ISO 13370-1998 |
建筑物的熱性能.經由地面的熱傳遞.計算方法 |
Thermal performance of buildings - Heat transfer via the ground - Calculation methods |
| BS EN ISO 13395-1996 |
水質.用流量分析法和光譜檢出法測定亞硝酸氮和硝酸氮及兩者的總含量(CFA和FIA). |
Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| BS EN ISO 13397-1-1996 |
牙周刮匙,牙刮除器和牙鉆孔器.第1部分:一般要求 |
(Periodontal curettes, dental scalers and excavators - General requirements) |
| BS EN ISO 13397-2-1997 |
牙周刮匙,牙刮除器和牙鉆孔器.第2部分:GR 型牙周刮匙 |
(Periodontal curettes, dental scalers and excavators - Periodontal curettes - Gr-type) |
| BS EN ISO 13397-3-1997 |
牙周刮匙,牙刮除器和牙鉆孔器.第3部分:H 型牙刮除器 |
(Periodontal curettes, dental scalers and excavators - Dental scalers - H-type) |
| BS EN ISO 13397-4-1998 |
牙周刮匙、牙刮除器和牙鉆孔器.牙科用鉆孔器.圓盤型 |
(Periodontal curettes, dental scalers and excavators - Dental excavators - Discoid type) |
| BS EN ISO 13406-1-1999 |
基于平坦面板的視覺顯示的人類工效學要求.介紹 |
(Ergonomic requirements for work with visual display based on flat panels - Introduction) |
| BS EN ISO 13406-2-2002 |
平板視覺顯示工作的人類工效學要求.平板顯示的人類工效學要求 |
(Ergonomic requirements for work with visual display based on flat panels - Ergonomic requirements for flat panel displays) |
| BS EN ISO 13407-1999 |
交互系統以人為中心的設計過程 |
(Human-centred design processes for interactive systems) |
| BS EN ISO 13426-1-2003 |
土工織物及其有關產品.內部結構聯結強度.土工網眼 |
(Geotextiles and geotextile-related products - Strength of internal structural junctions - Geocells) |
| BS EN ISO 13426-2-2005 |
土工織物及其有關產品.內部結構連接強度.土工合成物 |
|
| BS EN ISO 13427-1998 |
土工織物及其相關制品.磨損模擬(滑塊試驗) |
(Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test).) |
| BS EN ISO 13428-2005 |
土工合成織物.土工合成織物抗沖擊損壞的保護效率測定 |
|
| BS EN ISO 13428-2005 |
土工合成織物.土工合成織物抗沖擊損壞的保護效率測定 |
|
| BS EN ISO 13431-1999 |
土工織物和土工織物相關產品.拉伸蠕變和蠕變斷裂性能的測定 |
(Geotextiles and geotextiles-related products - Determination of tensile creep and creep rupture behaviour) |
| BS EN ISO 13437-1998 |
土工織物及其相關制品.裝配、土壤中萃取抽樣和實驗室用試樣試驗的方法 |
(Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory) |
| BS EN ISO 1346-2004 |
纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3).3、4和8股繩索 |
|
| BS EN ISO 1346-2004 |
纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3).3、4和8股繩索 |
|
| BS EN ISO 13468-1-1997 |
塑料.透明材料光透射率總量的測定.第1部分:單束發射儀器 |
(Plastics - Determination of the total luminous transmittance of transparent materials - Single-beam instrument) |
| BS EN ISO 13473-1-2004 |
表面外觀路面結構的特性.平均剖面高度的測定 |
|
| BS EN ISO 13478-1997 |
流體傳送用熱塑性塑料管道.抗快速破裂擴展性(RCP)的測定.實物試驗 |
(Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test) |
| BS EN ISO 13479-1997 |
流體傳輸用聚烯烴管.抗破裂擴展性的測定.有凹口的管上裂紋緩慢增長的試驗方法(切口試驗) |
(Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test)) |
| BS EN ISO 13485-2003 |
醫療設備.質量管理體系.管理要求 |
(Medical devices - Quality management systems - Requirements for regulatory purposes) |
| BS EN ISO 13500-1999 |
石油和天然氣工業.鉆用清洗液材料.規范和試驗 |
(Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests) |
| BS EN ISO 13533-2002 |
石油和天然氣工業.鉆孔和生產設備.鉆孔設備 |
(Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment) |
| BS EN ISO 13534-2001 |
石油和天然氣工業.鉆探和生產設備.提升設備的檢驗、維護、修理和再制造 |
(Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and re-manufacture of hoisting equipment) |
| BS EN ISO 13535-2001 |
石油和天然氣工業.開采和生產設備.提升設備 |
(Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment) |
| BS EN ISO 13565-1-1997 |
幾何制品規范(GPS).表面特征:輪廓法.表面分層功能特性.篩選和一般測量條件 |
(Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Filtering and general measurement conditions) |
| BS EN ISO 13565-2-1997 |
幾何制品規范(GPS).表面特征:輪廓法.表面分層功能特性.利用線材比例曲線表記述高度特性 |
(Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the linear material ration curve) |
| BS EN ISO 13565-3-2000 |
幾何產品規范(GPS).表面特征:輪廓法.表面分層功能特性.利用材料的概率曲線表描述高度特性 |
(Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the material probability curve) |
| BS EN ISO 13567-1-2002 |
技術產品文件.計算機輔助設計(CAD)用層的編排和命名.綜述和原則 |
(Technical product documentation - Organization and naming of layers for CAD - Overview and principles) |
| BS EN ISO 13567-2-2002 |
技術產品文件.計算機輔助設計(CAD)用層的編排和命名.結構文件中使用的概念、格式和代碼 |
(Technical product documentation - Organization and naming of layers for CAD - Concepts, format and codes used in construction documentation) |
| BS EN ISO 13590-2004 |
小艇.個人艇.建造及系統安裝要求 |
|
| BS EN ISO 13625-2003 |
石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器 |
(Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings) |
| BS EN ISO 13628-1-1999 |
石油和天然氣工業.水下生產系統的設計和操作.一般要求和推薦規范 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - General requirements and recommendations) |
| BS EN ISO 13628-2-2001 |
石油和天然氣工業.水下生產系統的設計和操作.水下和船用軟管系統 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Flexible pipe systems for subsea and marine applications) |
| BS EN ISO 13628-3-2001 |
石油和天然氣工業.水下生產系統的設計和操作.流線系統 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Through flowline (TFL) systems) |
| BS EN ISO 13628-4-1999 |
石油和天然氣工業.水下生產系統的設計和操作.水下井口和主干設備 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea wellhead and tree equipment) |
| BS EN ISO 13631-2002 |
石油和天然氣工業.包裝用往復式氣體壓縮機 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors) |
| BS EN ISO 13666-1999 |
眼科光學.眼鏡鏡片.詞匯 |
(Ophthalmic optics - Spectacle lenses - Vocabulary) |
| BS EN ISO 13680-2002 |
石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件 |
(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions) |
| BS EN ISO 13691-2002 |
石油和天然氣工業.專用高速齒輪組件 |
(Petroleum and natural gas industries - High-speed special-purpose gear units) |
| BS EN ISO 13694-2001 |
光學和光學設備.激光和有關激光的設備.激光束能量密度分布的試驗方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution) |
| BS EN ISO 13695-2004 |
光學和光子學.激光和相關設備.激光的光譜特性的試驗方法 |
|
| BS EN ISO 13696-2002 |
光和光學儀器.用光學零件對零落的放射能量的試驗方法 |
(Optics and optical instruments - Test methods for radiation scattered by optical components) |
| BS EN ISO 13702-1999 |
石油和天然氣工業.近海生產設備著火和爆炸的控制和減弱.要求和導則 |
(Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines) |
| BS EN ISO 13703-2001 |
石油和天然氣工業.近海平臺管道系統設計和安裝 |
(Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms) |
| BS EN ISO 13705-2002 |
石油和天然氣工業.一般熔煉廠用火加熱器 |
(Petroleum and natural gas industries - Fired heaters for general refinery service) |
| BS EN ISO 13706-2000 |
石油和天然氣工業.風冷式熱交換器 |
(Petroleum and natural gas industries - Air cooled heat exchangers) |
| BS EN ISO 13709-2003 |
石油、石化和天然氣工業用離心泵 |
(Centrifugal pumps for petroleum, petrochemical and natural gas industries) |
| BS EN ISO 13710-2004 |
石油、石化和天然氣工業.往復式變?nèi)菡婵毡?/td>
| |
| BS EN ISO 13716-2000 |
牙科學.可逆和不可逆水解膠體印模材料系統 |
(Dentistry - Reversible-irreversible hydrocolloid impression material systems) |
| BS EN ISO 13731-2002 |
熱環境的人類工效學.詞匯和符號 |
(Ergonomics of the thermal environment - Vocabulary and symbols) |
| BS EN ISO 13736-1998 |
石油產品和其它液體.閃點測定.阿貝耳閉杯法 |
(Petroleum products and other liquids - Determination of flash point - Abel closed cup method) |
| BS EN ISO 13753-1999 |
機械振動和沖擊.手-臂振動.手-臂體系荷載時彈性材料振動可傳遞性的測量方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system) |
| BS EN ISO 13757-1996 |
液化石油氣.油殘余物的測定.高溫法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Determination of oily residues - High temperature method) |
| BS EN ISO 13758-1997 |
石油和石油產品的試驗方法.液化石油氣.丙烷干燥性的評估.評估凍結法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method) |
| BS EN ISO 13759-1997 |
石油和石油產品.石油產品.光譜計方法對柴油燃料中烷基硝酸鹽的測定 |
(Methods of test for petroleum and its products - Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method) |
| BS EN ISO 13760-2000 |
壓力下流體運輸用塑料管.累積損傷的計算方法 |
(Plastics pipes for the conveyance of fluids under pressure - Miner’s rule - Calculation method for cumulative damage) |
| BS EN ISO 13783-1998 |
塑料管道系統.未增塑聚氯乙烯(PVC-U)終負載承受雙套節接點.受到彎曲和內部壓力時強度和密封性的試驗方法 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure) |
| BS EN ISO 13786-1999 |
建筑物構件的熱性能.動態熱特性.計算方法 |
(Thermal performance of building components - Dynamic thermal characteristics - Calculation methods) |
| BS EN ISO 13787-2003 |
建筑設備和工業裝置用熱絕緣產品.標稱的傳熱性的測定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity) |
| BS EN ISO 13788-2002 |
建筑物部件和結構件的濕熱性能.防止臨界溫度和縫隙冷凝的內表面溫度.計算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods) |
| BS EN ISO 13789-1999 |
建筑物熱性能.傳輸熱損失系數.計算方法 |
(Thermal performance of buildings - Transmission heat loss coefficient - Calculation method) |
| BS EN ISO 13790-2004 |
建筑物的熱性能.對流式供暖能量消耗的計算 |
|
| BS EN ISO 13793-2001 |
建筑物的熱性能.地基防凍脹的熱設計 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave) |
| BS EN ISO 13844-2000 |
塑料管道系統.與未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯彈性密封環式套筒接合.負壓下的密封試驗方法 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure) |
| BS EN ISO 13845-2000 |
塑料管道系統.與未增塑聚氯乙烯管一起使用的彈性密封環式套筒接合.內壓下角度偏轉密封試驗 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang) |
| BS EN ISO 13846-2001 |
塑料管道系統.熱塑性壓力管用端負載和無端負載支承組件和接頭.內部水壓下長期密封性的試驗方法 |
(Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure) |
| BS EN ISO 13849-2-2003 |
機械安全.控制系統有關安全部分.確認 |
(Safety of machinery - Safety-related parts of control systems - Validation) |
| BS EN ISO 13897-2004 |
牙科學.汞齊合金膠囊 |
|
| BS EN ISO 139-2005 |
紡織品.調濕和試驗用標準大氣 |
|
| BS EN ISO 13900-2002 |
鋼.測定硼的含量.蒸餾后用光譜測定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation) |
| BS EN ISO 13916-1997 |
焊接.預熱溫度、層間溫度和預加熱的維持溫度測量的導則 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature) |
| BS EN ISO 13918-1998 |
焊接.弧螺栓焊接用螺栓和水泥箍 |
(Welding - Studs and ceramic ferrules for arc stud welding) |
| BS EN ISO 13919-1-1997 |
焊接.電子和激光射線焊接接頭.缺陷的質量級別導則.鋼 |
(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel) |
| BS EN ISO 13919-2-2001 |
焊接.電子和激光束焊接接頭.缺陷的質量級別導則.鋁及其可焊合金 |
(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys) |
| BS EN ISO 13920-1997 |
焊接.焊接結構的通用公差.長度和角度尺寸.形狀和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position) |
| BS EN ISO 13927-2001 |
塑料.用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector) |
| BS EN ISO 13929-2001 |
小艇.轉向齒條.齒條鏈系統 |
(Small craft - Steering gear - Geared link systems) |
| BS EN ISO 13934-1-1999 |
織物.織物拉伸特性.用剝離法對最大作用力和在最大作用力下延伸的測定 |
(Textiles - Tensile properties of fabrics - Determination of maximum force and elongation at maximum force using the strip method) |
| BS EN ISO 13934-2-1999 |
織物.織物拉伸特性.用夾鉗方法對最大作用力的測定 |
(Textiles - Tensile properties of fabrics - Determination of maximum force using the grab method) |
| BS EN ISO 13935-1-1999 |
織物.織物和成衣接縫拉伸特性.用剝離方法對接縫裂開最大拉力的測定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Determination of maximum force to seam rupture using the strip method) |
| BS EN ISO 13935-2-1999 |
織物.織物和成衣接縫拉伸特性.用夾鉗方法對接縫裂開最大拉力的測定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Determination of maximum force to seam rupture using the grab method) |
| BS EN ISO 13936-1-2004 |
紡織物.機織物中縫合處紗線的抗滑脫性測定.固定接縫打開法 |
|
| BS EN ISO 13936-2-2004 |
紡織品.機織物中縫合處紗線的抗滑脫性測定.固定荷載法 |
|
| BS EN ISO 13937-1-2000 |
紡織材料.織物撕裂特性.用沖擊擺方法測定撕裂力(埃爾門多夫) |
(Textiles - Tear properties of fabrics - Determination of tear force using ballistic pendulum method (Elmendorf)) |
| BS EN ISO 13937-2-2000 |
紡織材料.織物撕裂特性.褲形試樣撕裂力的測定(單撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of trouser-shaped test specimens (single tear method)) |
| BS EN ISO 13937-3-2000 |
紡織材料.織物撕裂特性.翼形試樣撕裂力的測定(單撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of wing-shaped test specimens (single tear method)) |
| BS EN ISO 13937-4-2000 |
紡織材料.織物撕裂特性.舌形試樣撕裂力的測定(雙撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of tongue-shaped test specimens (double tear test)) |
| BS EN ISO 13938-1-1999 |
織物.纖維破碎特性.破碎強度和破碎膨脹測定的液壓方法 |
(Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension) |
| BS EN ISO 13938-2-1999 |
紡織品.纖維破碎特性.對破碎強度和破碎膨脹力的氣動測定方法 |
(Textiles - Bursting properties of fabrics - Pneumatic method for determination of bursting strength and bursting distension) |
| BS EN ISO 13943-2000 |
防火安全.詞匯 |
(Fire safety - Vocabulary) |
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| BS EN ISO 13982-2-2005 |
防固體顆粒用防護服.測定細粒氣溶膠向服裝內滲漏量的試驗方法 |
|
| BS EN ISO 13995-2001 |
防護服.機械性能.材料抗穿刺性和抗撕裂性測定的試驗方法 |
(Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials) |
| BS EN ISO 13997-1999 |
防護服.機械特性.抗尖銳物切割特性的測定 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com