標準號 |
中文名稱 |
英文名稱 |
| EN 13562-2000 |
土木織物及其相關產品 抗?jié)B水性的測定（水壓試驗） |
Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) |
| EN 13564-1-2002 |
建筑物防洪裝置 第1部分：要求 |
Anti-flooding devices for buildings - Part 1: Requirements |
| EN 13564-2-2002 |
建筑物防洪裝置 第2部分：試驗方法 |
Anti-flooding devices for buildings - Part 2: Test methods |
| EN 13566-1-2002 |
用于修復非壓力排水和污水網的塑料管道系統 第1部分：總則 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN 13566-3-2002 |
用于修復非壓力排水和污水網的塑料管道系統 第3部分：帶密裝配管的襯套 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes |
| EN 13566-4-2002 |
用于修復非壓力排水和污水網的塑料管道系統 第4部分：帶現場固化管的襯套 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
| EN 13567-2002 |
防護服 擊劍者手、臂、腹部、小臂、生殖器及面部保護器 要求和試驗方法 |
Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
| EN 13569-2001 |
盒式卷筒衛生紙 性能要求和加工 |
Cabinet roller towels - Performance requirements and processing |
| EN 13571-2001 |
鞋類 鞋面、內襯和襯底試驗方法 抗撕裂強度 |
Footwear - Test methods for uppers, lining and insocks - Tear strength |
| EN 13572-2001 |
鞋類 鞋面、內襯和襯底試驗方法 接縫強度 |
Footwear - Test methods for uppers, lining and insocks - Seam strength |
| EN 13573-2001 |
內河航運船舶 拋錨、聯結、牽引、拖拉和停泊系統 |
Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems |
| EN 13574-2001 |
內河航運船舶 長度不超過5m的永久性安裝的攀登設備 |
Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m |
| EN 13575-2004 |
吹模或旋轉模制聚乙烯熱塑罐.地上化學制劑儲罐.要求和試驗方法 |
|
| EN 13579-2002 |
用于保護和修理混凝土結構的產品和系統 試驗方法 疏水浸透物的干燥試驗 |
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation |
| EN 13580-2002 |
用于保護和修理混凝土結構的產品和系統 試驗方法 疏水浸透物吸水性和耐堿性 |
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations |
| EN 13581-2002 |
用于保護和修理混凝土結構的產品和系統 試驗方法 化凍鹽應力后疏水浸透混凝土質量損失的測定 |
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
| EN 13583-2001 |
撓性防水板 瀝青、塑料和橡膠屋面防水板 抗冰雹能力測定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance |
| EN 13584-2003 |
混凝土結構的保護和檢修用產品和系統 試驗方法 檢修產品壓縮蠕變的測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
| EN 13585-2001 |
食品 玉米中fumonisins B1和B2的測定 帶固相萃取提取清理的高效液相色譜（HPLC）法 |
Foodstuffs - Determination of fumonisins B1 and B2 in maize - HPLC method with solid phase extraction clean-up |
| EN 13586-2004 |
起重機.檢修孔 |
|
| EN 13588-2004 |
瀝青和瀝青粘合劑.用擺動試驗測定瀝青粘合劑的粘性 |
|
| EN 1359-1998 |
燃氣表 隔膜燃氣表 |
Gas meters - Diaphragm gas meters |
| EN 13590-2003 |
包裝 用于各種零售物品運輸?shù)娜嵝赃\輸袋 容積和承載力的一般特性和試驗方法的測定 |
Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity |
| EN 13592-2003 |
收集家庭廢物用塑料袋 類型、要求和試驗方法 |
Plastics sacks for household waste collection - Types, requirements and test methods |
| EN 13593-2003 |
包裝 收集家庭廢物用紙袋 類型、要求和試驗方法 |
Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
| EN 13594-2002 |
職業摩托車手防護手套 要求和試驗方法 |
Protective gloves for professional motorcycle riders - Requirements and test methods |
| EN 13595-1-2002 |
職業摩托車手防護服 夾克、褲子和單件或分離式套裝 第1部分：一般要求 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements |
| EN 13595-2-2002 |
職業摩托車手防護服 夾克、褲子和單件或分離式套裝 第2部分：測定抗撞擊耐磨性的試驗方法 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance |
| EN 13595-3-2002 |
職業摩托車手防護服 夾克、褲子和單件或分離式套裝 第3部分：測定爆裂強度的試驗方法 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength |
| EN 13595-4-2002 |
職業摩托車手防護服 夾克、褲子和單件或分離式套裝 第4部分：測定抗撞擊割裂性的試驗方法 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance |
| EN 13596-2004 |
防水用柔性薄板.混凝土船橋甲板和其他車輛行駛的混凝土表面的防水性.粘結強度的測定 |
|
| EN 13597-2003 |
鐵路設施 橡膠懸掛部件 氣壓懸掛彈簧橡膠膜片 |
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 13598-1-2003 |
非壓力底下排水和污水塑料管道系統 非增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE） 第1部分：包括 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| EN 13599-2002 |
銅和銅合金 電氣用途的銅板、銅片和銅條 |
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN 1360-1996 |
受測燃料配制用橡膠軟管和軟管部件 規范 |
Rubber hoses and hose assemblies for measured fuel dispensing - Specification |
| EN 13600-2002 |
銅和銅合金 電氣用途的無縫銅管 |
Copper and copper alloys - Seamless copper tubes for electrical purposes |
| EN 136000-1992 |
通用規范：磁控管 |
Generic specification:Magnetrons |
| EN 136001-1992 |
空白詳細規范：脈沖磁腔管(不包括頻率快變磁控管) |
Blank detail specification:Pulsed magnetrons (excluding frequency agile magnetrons) |
| EN 136002-1992 |
空白詳細規范：射頻加熱或烹調用C.W.磁控管 |
Blank detail specification: C.W. magnetrons for RF heating or cooking applications |
| EN 13601-2002 |
銅和銅合金 常規電氣用途的銅棒、銅條和銅線 |
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| EN 13602-2002 |
銅和銅合金 用于制造導電體的拉制圓銅線 |
Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN 13603-2002 |
銅和銅合金 評估電氣用途拉制圓銅線上的保護錫鍍層的試驗方法 |
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| EN 13604-2002 |
銅和銅合金 電子管、半導體器件和真空設備用高導電率銅產品 |
Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
| EN 13605-2002 |
銅和銅合金 電氣用途的銅型材和型線材 |
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| EN 1361-1997 |
飛行燃油處理用橡膠軟管和軟管組件 規范 |
Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| EN 1361-2004 |
航空燃料輸送用橡膠軟管和軟管組件.規范 |
|
| EN 13610-2002 |
化學消毒劑 評價食品和工業領域中使用的化學消毒劑抵御噬菌體的殺病毒作用的定量懸浮試驗 試驗方法和要求 |
Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1) |
| EN 13611-2000 |
氣爐和燃氣用具的安全和控制設備 一般要求 |
Safety and control devices for gas burners and gas-burning appliances - General requirements |
| EN 13611/A1-2004 |
氣體燃燒器和燃氣器具的安全和控制裝置.一般要求 |
|
| EN 13611/A1-2004 |
氣體燃燒器和燃氣器具的安全和控制裝置.一般要求 |
|
| EN 13613-2001 |
滾軸運動器械 滑板 安全要求和試驗方法 |
Roller sports equipment - Skateboards - Safety requirements and test methods |
| EN 13614-2004 |
瀝青和瀝青粘合劑.使用水浸入試驗測定瀝青乳液的粘合性.集料法 |
|
| EN 13616-2004 |
液體石油燃料用固定罐的防溢流裝置 |
|
| EN 13617-1-2004 |
加油站.第1部分:計量泵、分配器和遙控泵送設備的建造和性能的安全要求 |
|
| EN 13617-2-2004 |
加油站.第2部分:計量泵、分配器用安全斷路器建造和性能的安全要求 |
|
| EN 13617-3-2004 |
加油站.第3部分:剪閥的建造和性能的安全要求 |
|
| EN 13617-4-2004 |
加油站.第4部分:計量泵和配油器用轉環的建造和性能的安全要求 |
|
| EN 13619-2002 |
郵政服務 郵件自動處理 信件處理器的光學特性 |
Postal services - Mail item processing - Optical characteristics for processing letters |
| EN 1362-1997 |
識別卡系統 設備接口特性 設備接口等級 |
Identification card systems - Device interface characteristics - Classes of device interfaces |
| EN 13621-2004 |
食品加工機械.色拉干燥機.安全和衛生要求 |
|
| EN 13622-2002 |
氣焊設備 術語 有關氣焊設備的術語 |
Gas welding equipment - Terminology - Terms used for gas welding equipment |
| EN 13625-2001 |
無損檢測 檢漏 測量氣體泄漏的儀器的選擇指南 |
Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage |
| EN 13626-2003 |
包裝 箱平板架 通用要求和試驗方法 |
Packaging - Box paletts - General requirements and test methods |
| EN 13627-2000 |
推土機 下落物體保護結構 實驗室試驗和性能要求（ISO 3449:1992，修改） |
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:1992, modified) |
| EN 13628-1-2002 |
包裝 撓性包裝材料 用靜態凈空氣相色譜法測定殘余溶劑 第1部分：絕對法 |
Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods |
| EN 13628-2-2002 |
包裝 撓性包裝材料 用靜態凈空氣相色譜法測定殘余溶劑 第2部分：工業方法 |
Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
| EN 13629-2002 |
木地板 實木預裝配實心硬木地板 |
Wood flooring - Solid pre-assembled hardwood board |
| EN 1363-1-1999 |
耐火試驗 第1部分：一般要求 |
Fire resistance tests - Part 1: General requirements |
| EN 1363-2-1999 |
耐火試驗 第2部分：替換和添加程序 |
Fire resistance tests - Part 2: Alternative and additional procedures |
| EN 13630-11-2002 |
民用炸藥 導爆索和安全引信 第11部分：導爆索導爆速度的測定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 11: Determination of velocity detonation of detonating cords |
| EN 13630-12-2002 |
民用炸藥 導爆索和安全引信 第12部分：安全引信燃燒持續時間的測定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses |
| EN 13630-2-2002 |
民用炸藥 導爆索和安全引信 第2部分：導爆索和安全引信熱穩定性的測定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses |
| EN 13630-3-2002 |
民用炸藥 導爆索和安全引信 第3部分：導爆索芯對磨擦敏感性的測定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords |
| EN 13630-4-2002 |
民用炸藥 導爆索和安全引信 第4部分：導爆索對撞擊敏感性的測定 |
Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords |
| EN 13630-6-2002 |
民用炸藥 導爆索和安全引信 第6部分：導爆索抗拉強度的測定 |
Explosives for civil use - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords |
| EN 13630-7-2002 |
民用炸藥 導爆索和安全引信 第7部分：導爆索起爆可靠性的測定 |
Explosives for civil use - Detonating cords and safety fuses - Part 7: Determination of the reliability of initiation of detonating cords |
| EN 13630-8-2002 |
民用炸藥 導爆索和安全引信 第8部分：導爆索和安全引信耐水性的測定 |
Explosives for civil use - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses |
| EN 13630-9-2004 |
民用爆炸物.引爆線和安全引信.第9部分:引爆線間引爆傳輸?shù)臏y定 |
|
| EN 13631-12-2004 |
民用爆炸物.烈性炸藥.第12部分:具有不同起爆能力的引爆劑的規范 |
|
| EN 13631-13-2003 |
民用炸藥 烈性炸藥 第13部分：密度測定 |
Explosives for civil uses - High explosives - Part 13: Determination of density |
| EN 13631-14-2003 |
民用炸藥 烈性炸藥 第14部分：引爆速度的測定 |
Explosives for civil uses - High explosives - Part 14: Determination of velocity of detonation |
| EN 13631-16-2004 |
民用爆炸物.烈性炸藥.第16部分:毒性氣體的檢測和測量 |
|
| EN 13631-2-2002 |
民用炸藥 烈性炸藥 第2部分：炸藥熱穩定性的測定 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives |
| EN 13631-3-2004 |
民用爆炸物.烈性炸藥.第3部分:爆炸物摩擦敏感度的測定 |
|
| EN 13631-4-2002 |
民用炸藥 烈性炸藥 第4部分：炸藥對撞擊敏感性的測定 |
Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives |
| EN 13631-5-2002 |
民用炸藥 烈性炸藥 第5部分：耐水性測定 |
Explosives for civil uses - High explosives - Part 5: Determination of resistance to water |
| EN 13631-6-2002 |
民用炸藥 烈性炸藥 第6部分：抗水壓阻力的測定 |
Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure |
| EN 13634-2002 |
職業摩托車手防護鞋 要求和試驗方法 |
Protective footwear for professional motocycle riders - Requirements and test methods |
| EN 13635-2001 |
灌溉技術 局部灌溉系統 術語和制造商提供的數據 |
Irrigation techniques - Localised irrigation systems - Terminology and data to be supplied by the manufacturer |
| EN 13636-2004 |
地下金屬罐和相關管道的陰極保護 |
|
| EN 13639-2002 |
石灰石中總有機碳含量的測定 |
Determination of total organic carbon in limestone |
| EN 1364-1-1999 |
非承重構件的耐火試驗 第1部分：墻 |
Fire resistance tests for non-loadbearing elements - Part 1: Walls |
| EN 1364-2-1999 |
非承重構件的耐火試驗 第2部分：頂棚 |
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings |
| EN 13640-2002 |
體外診斷劑的穩定性試驗 |
Stability testing of in vitro diagnostic reagents |
| EN 13641-2002 |
消除或減少與體外診斷劑相關的傳染風險 |
Elimination or reduction of risk of infection related to in vitro diagnostic reagents |
| EN 13645-2001 |
液化石油氣裝置和設備 貯存容量在5t到200t之間的陸上裝置的設計 |
Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
| EN 13647-2002 |
木地板和鑲木地板及木鑲板和覆蓋層 幾何特性的測定 |
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics |
| EN 13648-1-2002 |
低溫容器 抗過壓保護安全設備 第1部分：低溫服務用安全閥 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
| EN 13648-2-2002 |
低溫容器 抗過壓保護安全設備 第2部分：低溫容器防爆盤安全設備 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic vessels |
| EN 13648-3-2002 |
低溫容器 抗過壓保護安全設備 第3部分：要求排出量、容積和尺寸的測定 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing |
| EN 13649-2001 |
固定源排放物 各氣態有機化合物質量濃度的測定 活性炭和溶劑吸附法 |
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method |
| EN 1365-1-1999 |
承重構件的耐火試驗 第1部分：墻 |
Fire resistance tests for loadbearing elements - Part 1: Walls |
| EN 1365-2-1999 |
承重鉤件的耐火試驗 第2部分：地板和屋頂 |
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
| EN 1365-3-1999 |
承重鉤件的耐火試驗 第3部分：橫梁 |
Fire resistance tests for loadbearing elements - Part 3: Beams |
| EN 1365-4-1999 |
承重構件的耐火試驗 第4部分：柱 |
Fire resistance tests for loadbearing elements - Part 4: Columns |
| EN 1365-5-2004 |
承重部件的防火試驗.第5部分:陽臺和過道 |
|
| EN 1365-6-2004 |
承重部件的防火試驗.第6部分:樓梯 |
|
| EN 13650-2001 |
土壤改良劑和生長介質 王水可溶物的萃取 |
Soil improvers and growing media - Extraction of aqua regia soluble elements |
| EN 13651-2001 |
土壤改良劑和生長介質 氯化鈣/DTPA（CAT）可溶營養物的萃取 |
Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients |
| EN 13652-2001 |
土壤改良劑和生長介質 水溶性營養物和素的萃取 |
Soil improvers and growing media - Extraction of water soluble nutrients and elements |
| EN 13653-2004 |
防水用柔性薄板.車輛通行用混凝土橋板和其他混凝土表面的防水.剪切強度的測定 |
|
| EN 13654-1-2001 |
土壤改良劑和生長介質 氮的測定 第1部分：改進凱氏法 |
Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method |
| EN 13654-2-2001 |
土壤改良劑和生長介質 氮的測定 第2部分：Dumas法 |
Soil improvers and growing media - Determination of nitrogen - Part 2: Dumas method |
| EN 13655-2002 |
塑料 農業和園藝中使用的熱塑性覆蓋膜 |
Plastics - Mulching thermoplastic films for use in agriculture and horticulture |
| EN 13656-2002 |
標準號： |
中文標題： |
| EN 13657-2002 |
廢物特性 用于素中王水可溶部分連續測定的溶出 |
Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 13659-2004 |
遮板.包括安全的性能要求 |
|
| EN 1366-1-1999 |
服務設施的耐火試驗 第1部分：管道 |
Fire resistance tests for service installations - Part 1: Ducts |
| EN 1366-2-1999 |
服務設施的耐火試驗 第2部分：防火閥 |
Fire resistance tests for service installations - Part 2: Fire dampers |
| EN 1366-3-2004 |
輔助設施的防火檢驗.第3部分:滲透封裝 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com