標準號 |
中文名稱 |
英文名稱 |
| BS EN 60169-24-1994 |
射頻連接器.帶有螺旋耦合器的射頻同軸連接器,主要用于75ΩF型電纜分配系統 |
(Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)) |
| BS EN 60169-25-1994 |
射頻連接器.同帶有內孔的外導體直徑為13.56mm(0.534in)TWHN型雙內導體的屏蔽對稱電纜一起使用雙柱螺旋 |
((Radio-frequency connectors - Two-pole screw () |
| BS EN 60172-1996 |
測定漆包繞組線溫度指數的試驗規程 |
(Test procedure for the determination of the temperature index of enamelled winding wires) |
| BS EN 60182-2-1991 |
線圈線基本尺寸.第2部分:漆包圓線圈線最大全徑規范 |
(Basic dimensions of winding wires - Specification for maximum overall diameters of enamelled round winding wires) |
| BS EN 60188-2001 |
高壓汞蒸氣燈.性能規范 |
(High-pressure mercury vapour lamps - Performance specifications) |
| BS EN 60191-3-2000 |
半導體器件的機械標準化.集成電路略圖繪制的一般規則 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of integrated circuits) |
| BS EN 60191-4-2000 |
半導體器件的機械標準化.半導體器件封裝外殼形式的分類和編碼系統 |
(Mechanical standardization of semiconductor devices - Coding system and classification into forms of package outlines for semiconductor device packages) |
| BS EN 60191-6-1-2002 |
半導體器件的機械標準化.表面安裝半導體器件封裝外形圖繪制的一般規則.海鷗翼式鉛終端的設計指南 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals) |
| BS EN 60191-6-10-2004 |
半導體器件的機械標準化.表面安裝半導體器件封裝外形圖繪制的一般規則.P-VSON尺寸 |
|
| BS EN 60191-6-10-2004 |
半導體器件的機械標準化.表面安裝半導體器件封裝外形圖繪制的一般規則.P-VSON的尺寸 |
|
| BS EN 60191-6-12-2002 |
半導體器件機械標準化.表面安裝的半導體器件封裝圖形圖繪制的一般規則.細微間距柵級陣列(FLGA)的設計規則. |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch land grid arr) |
| BS EN 60191-6-2-2002 |
半導體器件的機械標準化.表面安裝半導體器件封裝外形圖繪制的一般規則.1.5mm、1.27mm和1.00mm樹脂球和引線 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,0) |
| BS EN 60191-6-3-2001 |
半導體裝置的機械標準化.表面固定半導體裝置包裝輪廓線繪制的一般規則.包裝尺寸的測量方法 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions) |
| BS EN 60191-6-4-2003 |
半導體器件的機械標準化.繪制表面安裝半導體器件封裝外形圖的一般規則.焊球網格陣列封裝尺寸的測量方法 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions) |
| BS EN 60191-6-5-2001 |
半導體器件的機械標準化.表面安裝半導體器件封裝外形圖繪制的一般規則.小螺距球柵陣列的設計指南 |
(Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitchball grid arra) |
| BS EN 60191-6-6-2001 |
半導體裝置的機械標準化.表面固定的半導體裝置包裝的輪廓繪制準備的一般要求.設計指南 |
Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch land grid array (FLGA) |
| BS EN 60191-6-8-2001 |
半導體器件的機械標準化.表面安裝半導體器件封裝外形圖繪制的一般規則.玻璃密封陶瓷方型扁平封裝的設計指南 |
Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad flatpack (G-QFP) |
| BS EN 60192-2001 |
低壓鈉蒸氣燈.性能規范 |
Low pressure sodium vapour lamps - Performance specification |
| BS EN 602-1995 |
鋁和鋁合金.鍛制品.用與食品接觸的材料生產的半成品的化學組成 |
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food |
| BS EN 602-2004 |
鋁和鋁合金.鍛件.與食品接觸的產品制造用半成品的化學成分 |
|
| BS EN 60204-1-1998 |
機械安全.機械用電設備.一般要求 |
Safety of machinery - Electrical equipment of machines - General requirements |
| BS EN 60204-11-2001 |
機器的安全.機器的電氣設備.電壓大于1000V交流電或1500V直流電不超過36KV的設備的要求 |
Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
| BS EN 60204-31-1998 |
機械安全.機械用電氣設備.鋸,單和系統的特殊要求 |
Safety of machinery - Electrical equipment of machines - Particular safety and EMC requirements for sewing machines, units and systems |
| BS EN 60204-32-1998 |
機械安全.機器的電氣設備.提升機的要求 |
(Safety of machinery - Electrical equipment of machines - Requirements for hoisting machines) |
| BS EN 60205-2001 |
磁性零件有效參數的計算 |
Calculation of the effective parameters of magnetic piece parts |
| BS EN 60214-1-2003 |
抽頭轉換開關.性能要求和試驗方法 |
(Tap-changers - Performance requirements and test methods) |
| BS EN 60214-1998 |
帶載分接開關 |
On-load tap-changers |
| BS EN 60215-1990 |
對無線電發射設備的安全要求 |
Safety requirements for radio transmitting equipment |
| BS EN 60216-1-2002 |
電絕緣材料耐熱性能的測定指南.老化法和試驗結果的評定 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results |
| BS EN 60216-3-2002 |
電絕緣材料.耐熱性能.耐熱性計算說明 |
Electrical insulating materials - Thermal endurance properties - Instructions for calculating thermal endurance characteristics |
| BS EN 60216-4-2-2001 |
電絕緣材料耐熱性能的測定導則.電絕緣材料,耐熱特性.溫度達300攝氏度的精度爐 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Electrical insulating materials - Thermal endurance properties - Precision ovens for use up to 300 鳦 |
| BS EN 60216-4-3-2000 |
電絕緣材料耐熱性能的測定導則.電氣絕緣材料.耐熱特性.老化爐,多室爐 |
Guide for the determination of thermal endurance properties of electrical insulating materials - Electrical insulating materials - Thermal endurance properties - Ageing ovens - Multi-chamber ovens |
| BS EN 60216-5-2003 |
電絕緣材料.耐熱特性.絕緣材料的相對耐熱指數(RTE)的測定 |
(Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material) |
| BS EN 60216-6-2004 |
電絕緣材料.耐熱性能.使用固定時間框法測定絕緣材料的耐熱指數(TI和RTE) |
|
| BS EN 60216-6-2004 |
電絕緣材料.耐熱性能.使用固定時間框法測定絕緣材料的耐熱指數(TI和RTE) |
|
| BS EN 60228-2005 |
絕緣電纜導線 |
|
| BS EN 60230-2002 |
電纜及其附件的沖擊電壓試驗 |
Impulse tests on cables and their accessories |
| BS EN 60238-1999 |
埃德森螺紋燈座 |
Edison screw lampholders |
| BS EN 60239-1997 |
電弧爐用的帶螺紋座和連接銷的圓柱形機加工石墨電極的公稱尺寸 |
(Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces) |
| BS EN 60240-1-1994 |
工業加熱用電紅外發射器的特性.第1部分:短波紅外發射器 |
Characteristics of electric infra-red emitters for industrial heating - Short wave infra-red emitters |
| BS EN 60243-1-1998 |
固體絕緣材料介電強度的試驗方法.電源頻率下的試驗 |
Methods of test for electric strength of solid insulating materials - Tests at power frequencies |
| BS EN 60243-2-2001 |
固體絕緣材料介電強度的試驗方法.用直流電壓測試的補充要求 |
(Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage) |
| BS EN 60243-3-2002 |
固體絕緣材料介電強度的試驗方法.1.2/50 |
(Methods of test for electric strength of solid insulating materials - Additional requirements for 1,2/50) |
| BS EN 60244-1-2000 |
無線電發射機的測量方法.廣播發射機的總特征 |
(Methods of measurement for radio transmitters - General characteristics for broadcast transmitters) |
| BS EN 60244-10-1993 |
無線電發射機的測量方法.第10部分:采用插入測試信號的電視發射機和差轉機的測量方法 |
(Methods of measurement for radio transmitters - Methods of measurement for television transmitters and transposers employing insertion test signals) |
| BS EN 60244-11-1993 |
無線電發射機測量方法.第11部分:調頻聲廣播用轉發器 |
(Methods of measurement for radio transmitters - Transposers for FM sound broadcasting) |
| BS EN 60244-12-1-1994 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.第1節:規定特性 |
(Methods of measurement for radio transmitters - Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Characteristics to be specified) |
| BS EN 60244-12-2-1994 |
無線電發射機的測量方法.聲音和電視廣播用發射機和差轉機的草擬說明導則.說明卡 |
(Methods of measurement for radio transmitters - Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Specification sheets) |
| BS EN 60244-13-1993 |
無線電發射機的測量方法.第13部分:調頻播音的特有性能 |
(Methods of measurement for radio transmitters - Performance characteristics for FM sound broadcasting) |
| BS EN 60244-14-1997 |
無線電發射機測量方法.一個或多個使用一樣或鄰近天線的發射機外部互調產品 |
(Methods of measurement for radio transmitters - External intermodulation products caused by two or more transmitters using the same or adjacent antennas) |
| BS EN 60244-15-2000 |
無線電發射機的測量方法.聲音廣播用調幅發射機 |
(Methods of measurement for radio transmitters - Amplitude-modulated transmitters for sound broadcasting) |
| BS EN 60244-5-1995 |
無線電發射機的測量方法.第5部分:電視發射機的特性 |
(Methods of measurement for radio transmitters - Performance characteristics of television transmitters) |
| BS EN 60244-8-1995 |
無線電發射機測量方法.第8部分:用做測試電視發射機和差轉機的殘留邊帶解調器的特性 |
(Methods of measurement for radio transmitters - Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers) |
| BS EN 60244-9-1995 |
無線電發射機的測量方法.第9部分:電視換位器的特性 |
(Methods of measurement for radio transmitters - Performance characteristics for television transposers) |
| BS EN 60247-2004 |
)和直流電阻率的測量 |
BS EN 60247-2004 |
| BS EN 60249-1-1983 |
印制電路板用基材.第1部分:試驗方法 |
(Base materials for printed circuits - Base materials for printed circuits - Test methods) |
| BS EN 60249-2-11-1990 |
規范.多層印制電路板生產用普通級別的環氧樹脂紡織玻璃纖維覆銅層壓薄板規范規范. |
(Specifications - Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards) |
| BS EN 60249-2-12-1990 |
規范.多層印制板生產用限定燃燒特性的環氧織造玻璃纖維覆銅層壓板 |
(Specifications - Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards) |
| BS EN 60249-2-13-1990 |
印制電路板用基材.第2部分:規范.第13節:通用繞性覆銅聚酰亞胺薄膜 |
(Base material for printed circuits - Specifications - Flexible copper-clad polyimide film, general purpose grade) |
| BS EN 60249-2-14-1990 |
規范.限定燃燒特性的酚醛多孔覆銅層壓板(垂直燃燒試驗),經濟性 |
(Specifications - Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality) |
| BS EN 60249-2-15-1991 |
印制電路用基材.第2部分:規范.第15號規范:規定的易燃性的軟覆銅聚酰亞胺薄膜 |
(Specifications - Flexible copper-clad polyimide film, of defined flammability) |
| BS EN 60249-2-16-1992 |
規范.第16號規范:規定可燃性(立式燃燒性試驗)的聚酰亞胺玻璃纖維覆銅箔疊層板 |
(Specifications - Specification No. 16 - Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)) |
| BS EN 60249-2-17-1992 |
規范.第17號規范:制造多層印制板用的規定可燃性的酰亞胺玻璃纖維編織的覆銅箔疊板 |
(Specifications - Specification No. 17 - Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards) |
| BS EN 60249-2-18-1992 |
規范.第18號規范:規定可燃性的(立式耐燃性試驗)的比斯碼勤米德(bismaleimide)/三嗪改型環氧化物玻璃纖維編 |
(Specifications - Specification No. 18 - Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)) |
| BS EN 60249-2-19-1992 |
規范.第19號規范.制造多層印制板用的規定可燃性能的薄比斯瑪勒米德(bismaleimide)/三嗪改型的環氧化物紡織 |
(Specifications - Specification No. 19 - Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer prin) |
| BS EN 60249-2-1992 |
規范.第19號規范:用在印制電路板生產的規定可燃性的比斯碼勤米德(bismaleimide)/三嗪改型氧化物玻璃纖維編 |
(Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printe) |
| BS EN 60249-2-2-1990 |
規范.酚醛纖維素紙覆銅層壓板,經濟質量的規范. |
(Specifications - Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality) |
| BS EN 60249-2-5-1994 |
規范.第5號規范:規定易燃性的環氧化合物編織的玻璃纖維覆銅層壓板(垂直燃燒試驗) |
(Specifications - Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)) |
| BS EN 60249-2-6-1994 |
規范.第6號規范:具有規定易燃性的酚醛纖維素紙覆銅層壓板(水平燃燒試驗) |
(Specifications - Specification No.6 - Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test)) |
| BS EN 60249-2-7-1994 |
規范.第7號規范:規定易燃性的酚醛纖維素紙覆銅層壓板(垂直燃燒試驗) |
(Specifications - Specification No.7 - Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)) |
| BS EN 60249-2-8-1990 |
印制電路用基材.規范.撓性銅基聚酯薄膜規范 |
(Specifications - Specification for flexible copper-clad polyester (PETP) film) |
| BS EN 60252-1-2002 |
交流電動機的電容器.總則.性能、試驗和額定值.安全要求.安裝和操作指南 |
(A.C. motor capacitors - General - Performance, testing and rating - Safety requirements - Guide for installation and operation) |
| BS EN 60252-2-2003 |
交流電動機電容器.電動機起動電容器 |
(A.C. motor capacitors - Motor start capacitors) |
| BS EN 60254-1-1997 |
牽引酸性鉛蓄電池.一般要求和試驗方法 |
(Lead-acid traction batteries - General requirements and methods of test) |
| BS EN 60254-1-2005 |
牽引鉛酸蓄電池.一般要求和試驗方法 |
|
| BS EN 60254-2-1997 |
牽引用鉛酸蓄電池.第2部分:電池的尺寸、終端及電池的兩極標記 |
(Lead-acid traction batteries - Dimensions of cells and terminals and marking of polarity on cells) |
| BS EN 60255-21-1-1989 |
繼電器.繼電器和保護設備上振動、沖擊、碰撞和地震的測試.振動試驗(正弦波) |
(Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Vibration tests (sinusoidal)) |
| BS EN 60255-21-2-1989 |
繼電器.繼電器和保護設備上振動、沖擊、碰撞和地震的測試.沖擊和碰撞試驗 |
(Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Shock and bump tests) |
| BS EN 60255-21-3-1993 |
繼電器.第21部分:繼電器和保護設備測量時的振動、沖擊、撞擊和地震試驗.第三節.地震試驗 |
(Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Seismic tests) |
| BS EN 60255-22-2-1997 |
繼電器.測量繼電器和保護設備的電干擾試驗.靜電放射試驗 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Electrostatic discharge tests) |
| BS EN 60255-22-3-2001 |
繼電器.測量繼電器和保護設備的電干擾試驗.輻射電磁場干擾試驗 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests) |
| BS EN 60255-22-4-2002 |
電氣繼電器.評估繼電器和保護設備的電氣干擾試驗.電器快速瞬間/短促消隱脈沖試驗 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test) |
| BS EN 60255-22-5-2002 |
繼電器.量值繼電器的的電干擾試驗 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Surge immunity test) |
| BS EN 60255-22-6-2001 |
繼電器.測量繼電器和保護設備的電干擾試驗.抗射頻場引起的饋電線感應干擾試驗 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields) |
| BS EN 60255-22-7-2003 |
電氣繼電器.測量繼電器和保護設備的電干擾試驗.工頻抗擾試驗 |
(Electrical relays - Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests) |
| BS EN 60255-23-1997 |
繼電器.觸點性能 |
(Electrical relays - Contact performance) |
| BS EN 60255-24-2001 |
繼電器.電力系統數據交換的通用格式 |
(Electrical relays - Common format for transient data exchange (COMTRADE) for power systems) |
| BS EN 60255-25-2000 |
繼電器.測量繼電器和保護設備的電磁輻射試驗 |
(Electrical relays - Electromagnetic emission tests for measuring relays and protection equipment) |
| BS EN 60255-3-1998 |
繼電器.與時間有關或無關的單輸入勵磁質量測量繼電器 |
(Electrical relays - Single input energizing quantity measuring relays with dependent or independent time) |
| BS EN 60255-5-2001 |
繼電器.測量繼電器和保護設備的絕緣協調性.要求和試驗 |
(Electrical relays - Insulation coordination for measuring relays and protection equipment - Requirements and tests) |
| BS EN 60255-6-1995 |
電子繼電器.測量繼電器和保護裝置 |
(Electrical relays - Measuring relays and protection equipment) |
| BS EN 60255-8-1998 |
繼電器.熱繼電器 |
(Electrical relays - Thermal electrical relays) |
| BS EN 60264-1-1992 |
繞組線的封裝.第1部分:圓繞組線線筒 |
(Packaging of winding wires - Containers for round winding wires) |
| BS EN 60264-2-1-1992 |
繞組線的封裝.第2部分:圓桶形輸出線軸.第1節:基本尺寸 |
(Packaging of winding wires - Cylindrical barrelled delivery spools - Basic dimensions) |
| BS EN 60264-2-2-1992 |
繞組線的封裝.圓柱形筒裝交貨線盤.熱塑性材料可回收線盤規范 |
(Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material) |
| BS EN 60264-2-3-1992 |
繞組線的封裝.第2部分:圓桶形輸出線軸.第3節:由熱塑性材料制成的不能回收使用的繞線軸規范 |
(Packaging of winding wires - Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material) |
| BS EN 60264-3-1-2000 |
繞組線的封裝.錐形輸出線軸.基本尺寸 |
(Packaging of winding wires - Taper barrelled delivery spools - Basic dimensions) |
| BS EN 60264-3-2-1999 |
繞組線的封裝.錐形輸出線軸.熱塑性材料制可回收使用的線軸規范 |
(Packaging of winding wires - Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials) |
| BS EN 60264-3-3-1992 |
繞組線的封裝.圓錐形筒裝交貨線盤.熱塑性材料不可回收線盤規范 |
(Packaging of winding wires - Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material) |
| BS EN 60264-3-4-1999 |
繞組線的封裝.錐形輸出線軸.錐形輸出線軸外殼的基本尺寸 |
(Packaging of winding wires - Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools) |
| BS EN 60264-3-5-1999 |
繞組線的包裝.錐形筒輸出線軸.熱塑材料制成的線軸容器規范 |
(Packaging of winding wires - Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material) |
| BS EN 60264-4-1-1992 |
繞組線的封裝.第4部分:試驗方法.第1節:熱塑性塑料制成的輸出線軸 |
(Packaging of winding wires - Methods of test - Delivery spools made from thermoplastic material) |
| BS EN 60264-4-2-1992 |
繞組線的封裝.第4部分:試驗方法.第2節:熱固性塑料制成的錐形筒式供帶盤容器 |
(Packaging of winding wires - Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools) |
| BS EN 60264-5-1-1997 |
繞組線的封裝.圓繞組線線筒 |
(Packaging of winding wires - Cylindrical barrelled delivery spools with conical flanges - Basic dimensions) |
| BS EN 60264-5-2-2001 |
繞組線的封裝.帶錐形法蘭的圓柱桶.熱塑材料做的可回收的卷筒規范 |
(Packaging of winding wires - Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material) |
| BS EN 60265-1-1998 |
高壓開關規范.額定電壓大于1kV小于52kV的開關 |
(Specification for high-voltage switches - Switches for rated voltages above 1 kV and less than 52 kV) |
| BS EN 60265-2-1991 |
高壓開關設備規范.額定電壓為52KV及其以上的高壓開關 |
(Specification for high-voltage switches - Specification for high-voltage switches - High-voltage switches for rated voltages of 52 kV and above) |
| BS EN 60268-12-1995 |
音響系統設備.廣播及類似用途用連接器的應用 |
(Sound system equipment - Application of connectors for broadcast and similar use) |
| BS EN 60268-16-2003 |
音響系統設備.用語音傳輸系數測定語音清晰度的目標額定功率 |
(Sound system equipment - Objective rating of speech intelligibility by speech transmission index) |
| BS EN 60268-3-2001 |
音響系統設備.放大器 |
(Sound system equipment - Amplifiers) |
| BS EN 60268-4-2004 |
音響系統設備.傳聲器 |
|
| BS EN 60268-5-2003 |
音響系統設備.揚聲器 |
(Sound system equipment - Loudspeakers) |
| BS EN 60268-7-1996 |
音響系統設備.頭戴受話器及耳機 |
(Sound system equipment - Headphones and earphones) |
| BS EN 60269-1-1999 |
低壓熔斷器.一般要求 |
(Low-voltage fuses - General requirements) |
| BS EN 60269-2-1988 |
低壓熔斷器.專職人員使用的熔斷器的補充要求 |
(Low-voltage fuses - Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)) |
| BS EN 60269-3-1995 |
低壓熔斷器.非專業人員用熔斷器的補充要求(主要是家用和類似用途用熔斷器) |
(Low-voltage fuses - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)) |
| BS EN 60269-4-1-2002 |
低壓熔斷器.第4-1部分:半導體器件用熔斷體的補充要求.第1-3節:標準化的熔斷體類型實例 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III: Examples of types of standardized fuse-links) |
| BS EN 60269-4-1988 |
低壓熔斷器.半導體器件防護用熔斷體的補充要求 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices) |
| BS EN 60270-2001 |
高電壓試驗技術.部分放電測量 |
(High-voltage test techniques - Partial discharge measurements) |
| BS EN 60276-1988 |
碳刷、刷握、換向器和滑環的定義和名稱 |
(Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com