標準號 |
中文名稱 |
英文名稱 |
| BS EN 10027-1-1992 |
鋼的命名體系.第1部分:鋼名.主要符號 |
(Designation systems for steel - Steel names, principal symbols) |
| BS EN 10027-2-1992 |
鋼的命名體系.第2部分:鋼號 |
(Designation systems for steels - Steel numbers) |
| BS EN 10028-1-2000 |
壓力容器用的鋼板制品規范.一般要求 |
(Specification for flat products made of steels for pressure purposes - General requirements) |
| BS EN 10028-2-2003 |
壓力容器用的扁平鋼軋材規范.具有規定的耐高溫性能的非合金鋼和合金鋼 |
(Specification for flat products made of steels for pressure purposes - Non-alloy and alloy steels with specified elevated temperature properties) |
| BS EN 10028-3-2003 |
壓力容器用的扁平鋼軋材規范.經過正火處理的可焊細粒鋼 |
(Specification for flat products made of steels for pressure purposes - Weldable fine grain steels, normalized) |
| BS EN 10028-4-2003 |
壓力容器用的扁平鋼軋材規范.具有規定的低溫特性的鎳合金鋼 |
(Specification for flat products made of steels for pressure purposes - Nickel alloy steels with specified low temperature properties) |
| BS EN 10028-5-2003 |
壓力容器用的扁平鋼軋材規范.熱機滾軋可焊細粒鋼 |
(Specification for flat products made of steels for pressure purposes - Weldable fine grain steels, thermomechanically rolled) |
| BS EN 10028-6-2003 |
壓力用的扁平鋼軋材規范.淬火和回火可焊細粒鋼 |
(Specification for flat products made of steels for pressure purposes - Weldable fine grain steels, quenched and tempered) |
| BS EN 10028-7-2000 |
壓力容器用的鋼板制品規范.不銹鋼 |
(Specification for flat products made of steels for pressure purposes - Stainless steels) |
| BS EN 10029-1991 |
厚度3mm或3mm以上熱軋鋼板尺寸、形狀和質量公差規范 |
(Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above) |
| BS EN 10031-2003 |
鍛造用半成品.形狀和質量尺寸公差 |
(Semi finished products for forging - Tolerances on dimensions shape and mass) |
| BS EN 10034-1993 |
工字型和H型結構鋼.形狀和尺寸公差 |
(Structural steel I and H sections - Tolerances on shape and dimensions) |
| BS EN 10036-1991 |
黑色金屬材料的化學分析.鋼鐵中的總碳含量的測定.在氧氣中燃燒后的重力測定法 |
(Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen) |
| BS EN 1004-2005 |
預制組件制的移動通道和工作塔.材料、尺寸、設計載荷、安全和性能要求 |
|
| BS EN 10045-1-1990 |
金屬材料的夏比沖擊試驗.V形和U形切口試驗方法 |
(Charpy impact test on metallic materials - Test method (V- and U-notches)) |
| BS EN 10045-2-1993 |
金屬材料的擺式?jīng)_擊試驗.第2部分:沖擊試驗機的檢驗方法 |
(Charpy impact test on metallic materials - Method for the verification of impact testing machines) |
| BS EN 10048-1997 |
熱滾軋窄鋼帶.尺寸和形狀公差 |
(Hot rolled narrow steel strip - Tolerances on dimensions and shape) |
| BS EN 1005-1-2002 |
機械安全.人體特性.術語和定義 |
(Safety of machinery - Human physical performance - Terms and definitions) |
| BS EN 1005-2-2003 |
機械安全.人體特性.機械和機械部件的人工搬運 |
(Safety of machinery - Human physical performance - Manual handling of machinery and component parts of machinery) |
| BS EN 1005-3-2002 |
機械安全.人體特性.機械操作的推薦力限值 |
(Safety of machinery - Human physical performance - Recommended force limits for machinery operation) |
| BS EN 10051-1992 |
非合金鋼和合金鋼連續熱軋未涂覆板材、薄板和帶材規范.尺寸和形狀公差 |
(Specification for continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape) |
| BS EN 10052-1994 |
黑色金屬制品的熱處理術語詞匯 |
(Vocabulary of heat treatment terms for ferrous products) |
| BS EN 10055-1996 |
熱軋等邊園弧根T型鋼的尺寸和形狀尺寸公差 |
(Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions) |
| BS EN 10056-1-1999 |
等角和非等角結構鋼規范.尺寸 |
(Specification for structural steel equal and unequal angles - Dimensions) |
| BS EN 10056-2-1993 |
等邊和不等邊結構角鋼.形狀和尺寸公差 |
(Specification for structural steel equal and unequal angles - Tolerances on shape and dimensions) |
| BS EN 10058-2003 |
一般用途熱軋扁鋼棒.尺寸及形狀和尺寸公差 |
(Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions) |
| BS EN 10059-2003 |
一般用途熱軋方形鋼棒.尺寸及形狀和尺寸公差 |
(Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions) |
| BS EN 10060-2003 |
一般用途熱軋圓鋼棒.尺寸及形狀和尺寸公差 |
(Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions) |
| BS EN 10061-2003 |
一般用途熱軋六角鋼棒.尺寸及形狀和尺寸公差 |
(Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions) |
| BS EN 10067-1997 |
熱軋制球扁鋼.尺寸及形狀、尺寸和質量公差 |
(Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass) |
| BS EN 1007-1-2002 |
高級工業陶瓷.陶瓷復合材料.纖維增強的試驗方法.膠粘劑含量的測定 |
(Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of size content) |
| BS EN 1007-2-2002 |
高級工業陶瓷.陶瓷復合材料.纖維增強的試驗方法.線性密度的測定 |
(Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of linear density) |
| BS EN 1007-3-2003 |
高級工業陶瓷.陶瓷復合材料.增強纖維的試驗方法.長纖維直徑和橫截面積的測定 |
(Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of filament diameter and cross-section area) |
| BS EN 1007-4-2005 |
高級工業陶瓷.陶瓷復合材料.纖維增強的試驗方法.環境溫度下長纖維的抗拉性能測定 |
|
| BS EN 1007-5-2003 |
高級工業陶瓷.陶瓷復合材料.增強纖維的試驗方法.室溫下復絲束中長絲斷開時的拉伸強度和拉伸應變分布的測定 |
(Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifi) |
| BS EN 10071-1991 |
黑色金屬材料的化學分析.鋼鐵中的錳含量的測定.電勢滴定法 |
(Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method) |
| BS EN 10079-1993 |
鋼制品定義 |
(Definition of steel products) |
| BS EN 1008-2002 |
混凝土的混合用水.取樣、測試和評價水的適用性的規范, 包括作為混凝土混合用水的混凝土加工過程中回收的水 |
(Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete) |
| BS EN 10083-1-1991 |
淬硬鋼和回火鋼.第1部分:特種鋼供貨技術條件 |
(Quenched and tempered steels - Technical delivery conditions for special steels) |
| BS EN 10083-2-1991 |
淬硬鋼和回火鋼.第2部分:非合金優質鋼供貨技術條件 |
(Quenched and tempered steels - Technical delivery conditions for unalloyed quality steels) |
| BS EN 10083-3-1996 |
淬硬鋼和回火鋼.第3部分:硼鋼的供貨技術條件 |
(Quenched and tempered steels - Technical delivery conditions for boron steels) |
| BS EN 10084-1998 |
表面硬化鋼.技術提交條件 |
(Case hardening steels - Technical delivery conditions) |
| BS EN 10085-2001 |
氮化鋼.技術提交條件 |
(Nitriding steel - Technical delivery conditions) |
| BS EN 10087-1999 |
快削鋼.熱軋棍和棒半成品技術提交條件. |
(Free cutting steels - Technical delivery conditions for semi-finished products, hot rolled bars and rods) |
| BS EN 10088-1-1995 |
不銹鋼.不銹鋼目錄 |
(Stainless steels - List of stainless steels) |
| BS EN 10088-1-2005 |
不銹鋼.不銹鋼的清單 |
|
| BS EN 10088-2-1995 |
不銹鋼.一般用途的薄板/板材和帶材的技術交貨條件 |
(Stainless steels - Technical delivery conditions for sheet/plate and strip for general purposes) |
| BS EN 10088-2-2005 |
不銹鋼.一般用途耐腐蝕鋼薄板/板材和帶材的交貨技術條件 |
|
| BS EN 10088-3-1995 |
不銹鋼.一般用途的半成品、鋼棒、軋制線材和型鋼的技術交貨條件 |
(Stainless steels - Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes) |
| BS EN 10088-3-2005 |
不銹鋼.通用耐腐蝕鋼制半成品、棒材、桿材、線材、型材和光亮產品的交貨技術條件 |
|
| BS EN 10089-2002 |
淬火和回火彈簧用熱軋鋼.交貨技術條件 |
(Hot rolled steels for quenched and tempered springs - Technical delivery conditions) |
| BS EN 10090-1998 |
內燃機用閥門鋼和合金 |
(Valve steels and alloys for internal combustion engines) |
| BS EN 10092-1-2003 |
一般用途熱軋彈簧扁鋼棒.尺寸及形狀和尺寸公差 |
(Hot rolled spring steel flat bars - Flat bars - Dimensions and tolerances on shape and dimensions) |
| BS EN 10092-2-2003 |
一般用途熱軋彈簧扁鋼棒.有肋有槽的簧片.尺寸及形狀和尺寸公差 |
(Hot rolled spring steel flat bars - Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions) |
| BS EN 10095-1999 |
耐熱鋼和鎳合金 |
(Heat resisting steels and nickel alloys) |
| BS EN 1010-3-2003 |
機械安全.印刷和紙加工機械的設計和施工的安全要求.切削機 |
(Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines) |
| BS EN 1010-4-2004 |
機械安全.設計和生產打印機和紙加工機的安全要求.裝訂機、紙加工機和裝飾機 |
|
| BS EN 10106-1996 |
冷軋非顆粒結構定向最終退火狀態下的電工鋼片和鋼帶 |
(Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state) |
| BS EN 10107-1996 |
顆粒結構定向最終退火裝態下的電工鋼片和鋼帶 |
(Grain-oriented electrical steel sheet and strip delivered in the fully processed state) |
| BS EN 10108-2004 |
冷鍛和冷擠壓圓鋼棒.尺寸和公差 |
|
| BS EN 1011-1-1998 |
焊接.金屬材料焊接的推薦規范.電弧焊接的通用指南 |
(Welding - Recommendations for welding of metallic materials - General guidance for arc welding) |
| BS EN 1011-2-2001 |
焊接.金屬材料焊接的推薦規范.鐵素體鋼的電弧焊接 |
(Welding - Recommendations for welding of metallic materials - Arc welding of ferritic steels) |
| BS EN 1011-3-2000 |
焊接.金屬材料焊接的推薦規范.不銹鋼的電弧焊接 |
(Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels) |
| BS EN 1011-4-2000 |
焊接.金屬材料焊接的推薦規范.鋁及鋁合金的電弧焊接 |
(Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys) |
| BS EN 1011-5-2003 |
焊接.金屬材料焊接的推薦規范.覆層鋼的焊接 |
(Welding - Recommendations for welding of metallic materials - Welding of clad steel) |
| BS EN 1011-7-2004 |
焊接.金屬材料焊接的推薦規范.電子束焊 |
|
| BS EN 1011-7-2004 |
焊接.金屬材料焊接的推薦規范.電子束焊 |
|
| BS EN 1011-8-2004 |
焊接.金屬材料焊接的推薦規范.鑄鐵的焊接 |
|
| BS EN 1011-8-2004 |
焊接.金屬材料焊接的推薦規范.鑄鐵的焊接 |
|
| BS EN 10111-1998 |
冷成型用連續熱軋低碳鋼薄板及帶材.交貨技術條件 |
(Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions) |
| BS EN 10113-1-1993 |
可焊接細品粒結構鋼的熱軋制品.一般交貨條件 |
(Hot-rolled products in weldable fine grain structural steels - General delivery conditions) |
| BS EN 10113-2-1993 |
可焊接細粒結構鋼的熱軋制品.正火/正火軋制鋼的交貨條件 |
(Hot-rolled products in weldable fine grain structural steels - Delivery conditions for normalized/normalized rolled steels) |
| BS EN 10113-3-1993 |
可焊接細品粒結構鋼的熱軋制品.熱軋鋼的交貨條件 |
(Hot-rolled products in weldable fine grain structural steels - Delivery conditions for thermomechanical rolled steels) |
| BS EN 1012-1-1997 |
壓縮機和真空泵.安全要求.壓縮機 |
(Compressors and vacuum pumps - Safety requirements - Compressors) |
| BS EN 1012-2-1997 |
壓縮機和真空泵.安全要求.真空泵 |
(Compressors and vacuum pumps - Safety requirements - Vacuum pumps) |
| BS EN 10120-1997 |
焊接儲氣瓶用鋼薄板及帶材 |
(Steel sheet and strip for welded gas cylinders) |
| BS EN 10126-1996 |
非最終退火裝態下非合金鋼制冷軋電工鋼片和鋼帶 |
(Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state) |
| BS EN 1013-1-1998 |
單層頂板光透明截面塑料板.一般要求和試驗方法 |
(Light transmitting profiled plastic sheeting for single skin roofing - General requirements and test methods) |
| BS EN 1013-2-1999 |
單層頂板光用透光仿型塑料薄板.玻璃纖維增強的聚酯樹脂薄板的試驗方法和特殊要求 |
(Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP)) |
| BS EN 1013-3-1998 |
單層頂板光透明截面塑料層.聚氯乙烯板的特殊要求和試驗方法 |
(Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of polyvinyl chloride (PVC)) |
| BS EN 1013-4-2000 |
單層屋頂用透光成型塑料薄板.聚碳酸酯板的特殊要求、試驗方法和性能 |
(Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements, test methods and performance of polycarbonate (PC) sheets) |
| BS EN 1013-5-2000 |
單層屋頂用透光成型塑料薄板.聚甲基丙烯酸甲酯板的特殊要求、試驗方法和性能 |
(Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets) |
| BS EN 10130-1999 |
冷成型的冷軋低碳鋼平板制品.技術提交條件 |
(Cold-rolled low-carbon steel flat products for cold forming - Technical delivery conditions) |
| BS EN 10131-1992 |
冷成型用冷軋未涂覆低碳和高屈服強度鋼扁材產品.尺寸和形狀公差 |
(Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape) |
| BS EN 10132-1-2000 |
熱處理用冷軋窄鋼條.技術提交條件.總則 |
(Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - General) |
| BS EN 10132-2-2000 |
熱處理用冷軋窄鋼條.技術交貨條件.表面硬化鋼 |
(Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Case hardening steels) |
| BS EN 10132-3-2000 |
熱處理用冷軋窄鋼條.技術交貨條件.淬火和回火鋼 |
(Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Steels for quenching and tempering) |
| BS EN 10132-4-2000 |
熱處理用冷軋窄鋼條.技術交貨條件.彈簧鋼和其它應用 |
(Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Spring steels and other applications) |
| BS EN 10136-1991 |
黑色金屬材料的化學分析.鋼鐵中的鎳含量的測定.火焰原子吸收光譜測定法 |
(Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method) |
| BS EN 10137-1-1996 |
調質或沉淀硬化狀態下高屈服點結構鋼制薄板和寬扁鋼.第1部分:一般交貨條件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - General delivery conditions) |
| BS EN 10137-2-1996 |
調質或剪斷硬化狀態下高屈服點結構鋼制薄板和寬扁鋼.第2部分:調質鋼的交換條件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Delivery conditions for quenched and tempered steels) |
| BS EN 10137-3-1996 |
調質或剪斷硬化狀態下高屈服點結構鋼制薄板和寬扁鋼.第3部分:剪斷硬化鋼的交貨條件 |
(Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Delivery conditions for precipitation hardened steels) |
| BS EN 10139-1998 |
冷成型用冷軋未涂覆軟鋼窄帶材.交貨技術條件 |
(Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions) |
| BS EN 1014-1-1995 |
木材防腐.雜酚油和涂油的木材.抽樣方法和分析.雜酚油采樣過程 |
(Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Procedure for sampling creosote) |
| BS EN 1014-2-1996 |
木材防腐.雜酚油和涂油的木材.抽樣方法和分析.雜酚油采樣過程 |
(Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis) |
| BS EN 1014-3-1998 |
木材防腐.雜酚油和涂油的木材.抽樣和分析方法.雜酚油中苯并芘含量的測定 |
(Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Determination of the benzo[a]pyrene content of creosote) |
| BS EN 1014-4-1996 |
木材防腐劑.煤焦浸漬油及用該油浸漬的木材.取樣和分析.第4部分:煤焦浸漬油中水解萃取苯酚含量的測定 |
(Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Determination of the water extractable phenols content of creosote) |
| BS EN 10140-1997 |
冷軋制窄鋼帶.尺寸和形狀公差 |
(Cold rolled narrow steel strip - Tolerances on dimensions and shape) |
| BS EN 10142-2000 |
冷成型用連續熱浸鍍鋅低碳鋼板材和帶材.交貨技術條件 |
(Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions) |
| BS EN 10143-1993 |
連續熱浸鍍金屬鋼板和鋼帶的尺寸和形狀公差 |
(Continuously hot-dip metal coated steel sheet and strip - Tolerances on dimensions and shape) |
| BS EN 10147-2000 |
連續熱浸鍍鋅結構薄鋼板和帶材.交貨技術條件 |
(Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions) |
| BS EN 10149-1-1996 |
冷成型用高屈服點鋼制熱軋扁平產品.第1部分:一般交貨條件 |
(Specification for hot-rolled flat products made of high yield strength steels for cold forming - General delivery conditions) |
| BS EN 10149-2-1996 |
冷成型用高屈服點鋼制熱軋扁平產品.第2部分:熱機械軋制鋼的交貨條件 |
(Specification for hot-rolled flat products made of high yield strength steels for cold forming - Delivery conditions for thermomechanically rolled steels) |
| BS EN 10149-3-1996 |
冷成型用高屈服點鋼制熱軋扁平產品.第3部分:普通退火和軋制鋼交貨條件 |
(Specification for hot-rolled flat products made of high yield strength steels for cold forming - Delivery conditions for normalized or normalized rolled steels) |
| BS EN 1015-1-1999 |
磚石灰漿試驗方法.顆粒尺寸分布的測定(篩分析法) |
(Methods of test for mortar for masonry - Determination of particle size distribution (by sieve analysis)) |
| BS EN 1015-10-1999 |
砌磚體用灰漿的試驗方法.硬化灰漿的毛體積干密度的測定 |
Methods of test for mortar for masonry - Determination of dry bulk density of hardened mortar |
| BS EN 1015-11-1999 |
磚石灰漿試驗方法.硬化灰漿彎曲和抗壓強度的測定 |
(Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar) |
| BS EN 1015-12-2000 |
圬工輔助件的試驗方法.襯底上的硬化灰漿的粘結強度的測定 |
(Methods of test for mortar for masonry - Determination of adhesive strength of hardened rendering and plastering mortars on substrates) |
| BS EN 1015-17-2000 |
磚石灰漿試驗方法.新鮮灰漿中水溶氯化物含量的測定 |
(Methods of test for mortar for masonry - Determination of water-soluble chloride content of fresh mortars) |
| BS EN 1015-18-2002 |
磚石灰漿試驗方法.通過硬化沙漿的毛細管作用測定吸水率 |
(Methods of test for mortar for masonry - Determination of water absorption coefficient due to capillary action of hardened mortar) |
| BS EN 1015-19-1999 |
磚石灰漿試驗方法.硬化粉刷灰漿和灰泥灰漿水蒸發滲透性的測定 |
(Methods of test for mortar for masonry - Determination of water vapour permeability of hardened rendering and plastering mortars) |
| BS EN 1015-1999 |
磚石灰漿試驗方法.硬化粉刷灰漿和灰泥灰漿水蒸發滲透性的測定 |
(Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars) |
| BS EN 1015-2-1999 |
磚石灰漿試驗方法.試驗灰漿制備和灰漿集塊取樣 |
(Methods of test for mortar for masonry - Bulk sampling of mortars and preparation of test mortars) |
| BS EN 1015-21-2002 |
磚石灰漿試驗方法.帶基質的單層初涂沙漿可混合性的測定 |
(Methods of test for mortar for masonry - Determination of the compatibility of one-coat rendering mortars with substrates) |
| BS EN 1015-3-1999 |
磚石灰漿的試驗方法.新鮮灰漿連續性測定 |
(Methods of test for mortar for masonry - Determination of consistence of fresh mortar (by flow table)) |
| BS EN 1015-4-1999 |
磚石灰漿試驗方法.新鮮灰漿連續性的測定(傾倒?jié)B透法) |
(Methods of test for mortar for masonry - Determination of consistence of fresh mortar (by plunger penetration)) |
| BS EN 1015-6-1999 |
磚石灰漿試驗方法.新鮮灰漿集塊密度的測定 |
(Methods of test for mortar for masonry - Determination of bulk density of fresh mortar) |
| BS EN 1015-7-1999 |
磚石灰漿試驗方法.新鮮灰漿空氣含量的測定 |
(Methods of test for mortar for masonry - Determination of air content of fresh mortar) |
| BS EN 1015-9-1999 |
磚石灰漿試驗方法.新鮮灰漿使用壽命和校正時間的測定 |
(Methods of test for mortar for masonry - Determination of workable life and correction time of fresh mortar) |
| BS EN 10151-2002 |
彈簧用不銹鋼帶材.交貨技術條件 |
(Stainless steel strip for springs - Technical delivery conditions) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com